I have a Zebra RFD8500 here and I connected to it via the terminal. I am trying to use the ZETI command read to access epc's, but it does not read anything.
But if I use the ZETI command inventory it finds all the tags around.
Anyone knows how to use the read command properly? Also is there some kind of filter per default on?
I am using the developer example on page 174 Link to PDF
Not sure if you solved this problem, but I couldn't find anything else via Google. I had the same problem with using read in ZETI (Zebra RFD8500). The Zebra tech support told me that to use access operations like read and write, you have to turn off dynamic power (which I think is on by default).
Unfortunately, I am not using the iOS API/SDK (writing a custom one for another device), but here's the gist of what you'd be doing:
Turn off dynamic power
Do an inventory
Read some memory bank, like the EPC bank. Optionally, you can also specify access criteria to single out a tag.
To test how this worked in ZETI, I screened into the RFD8500 (on my Mac, doing ls /dev/tty.RFD* lists several ttys, I chose the one ending in "-R"):
screen /dev/tty.RFD8500{long number}-R
Then I issued these commands:
dp .disable
in
rd
Commands:
dp = setdynamicpower
in = inventory
rd = read
After issuing "rd", you should be able to see the user memory banks (the default bank for the "rd" command).
Related
I'm trying to print some RFID tags and retrieve their TIDs to store them in my system and know which tags have been printed. Right now I'm reading the TID and sending it back to my computer (connected via USB with the my ZT421 printer) with the following code:
^RFR,H,0,12,2^FN0^FS^FH_^HV0,24,,_0D_0A,L^FS
^RFW,H,2,12,1^FD17171999ABABABAAAAAAAAAB^FS
This is repeated for each tag that I'm printing. However, when printing 10 tags, I only get 9 TIDs. If after that I try to print 7 tags, I still get 9 TIDs. To be honest I'm a bit lost now, because even trying to use the code examples from the ZPL manual (I've tried the ^RI instruction also) it doesn't seem to work.
The communication with the printer is beeing done through Zebra Setup Utilities' direct communication tool.
I tried to retrieve each printed tag TID with:
^RFR,H,0,12,2^FN0^FS^FH_^HV0,24,,_0D_0A,L^FS
^RFW,H,2,12,1^FD17171999ABABABAAAAAAAAAB^FS
but I always get 9 TIDs.
I also tried getting the TID with the ZPL manual example for the ^RI command:
^XA
^FO20,120^A0N,60^FN0^FS
^RI0,,5^FS
^HV0,,Tag ID:^FS
^XZ
And I got absolutely nothing returned to the computer, just a mssage saying "Tag ID:" and no value shown.
I would really appreciate some help with this...
Thanks in advance!
I've fixed the issue, but I'm going to leave the solution here just in case someone else is facing the same problem.
I thought that maybe it wasn't a code issue, but something related to the computer-printer communication. It turned out to be the case. The Zebra Setup Utilities program has a button that says "options". If you click it, a new screen will open and there you can configure the seconds that the program will wait for the printer response (in this case through USB). By default it's set to 5, i changed this value to 100, which is the maximum. This meant that instead of just printing and retrieving the TIDs of 6-9 tags, now I can do it for about 100.
This is not amazing because in my case it implied creating 25 files for the 2500 tags I had to print and store the TIDs, however it's far better than before.
I execute "C:\Program Files\QlikView\qv.exe" /R "D:\QlikViewAdm\qlik_file.qvw" to launch the loader. It works when there is no section access. However, when I run a file with section access QV asks me for login and password. I can link the access to Windows user credentials, but it only works on my terminal.
Is there a way to point QV to a local file with credentials?
You can do it by using NTNAME in the section Access like so:
Section Access;
LOAD * INLINE [
ACCESS, USERID, PASSWORD,NTNAME
ADMIN, ADMIN, ADMIN , *
ADMIN, , , yourWindowsUserID
];
you can get yourWindowsUserID by using the OsUser() function (in QlikView).
hope this will help
First thing to notice is that the user churning is following the exponential function like the nuclear decay. Hence, t-test is useless (it assumes normal distribution).
Second, it is time to look at counts of users with 0,1,2.. events.
Third, just use Wilcoxon test if you compare the same cohort of users before and after. Otherwise, use Mann–Whitney U test. It is less stable than the tests on normally distributed values. However, it does the job whenever you cannot promise normality.
Spoiler: yes, it worked out. Cohort 1 and 2 were nearly indistinguishable, but cohort 3 and 1 yielded a difference at p < 0.001.
What I'm going to do is writing an script with python to take an excel file as an input and then read the number and description of interfaces of a switch which is written in there , and then ssh to a cisco switch and change the description with the values added before in excel .
could any body give me a hint?
Try checking netmiko module. I was able to do something close to what you require using netmiko but now I use ansible ios_command which is a lot more easier for a non programmer network engineer.
Start with Paramiko or Netmiko , Netmiko is a bit better version. I would also just rethink about the actual project where instead of thinking about one switch think about all of them and see if you have some universal thing which you need to do in all of your switches instead of one.
For this project you could do below.
1 . save date in CSV
2 . Open CSV file
3. Create a dictionary and Save interface name as key , and description as values
4. Create a list where you can save all your keys --> l = d.keys()
4. SSH to the sw via paramiko/Netmiko .
5. Run a loop in the list l
on each iteration send below commands
interface l[i]
description d[l[i]]
this will translate to below
interface eth1/1
description d['eth1/1'] ( d['eth1/1'] will be value/description of whatever you are gonna get from CSV)
If you really try to learn python then its a good start however if you are on a time crunch Ansible is easier option
I've been googling for quite a long time and I just can't find any information on how to get screen_number for every screen connected to computer. Here I found a list of macros and some of them (like for example ScreenOfDisplay(display, screen_number) ) use argument screen_number. However there is no such macro that could give me a list of those numbers (one for every connected screen). I know how to get number of default screen (DefaultScreen() ) and count of all screens ( ScreenCount() ) but what about other screens? I noticed that screen_number of default screen is 0, although I have only one screen connected to my computer so I can't really test what happens when there are more of them. I think that screen_number could be assigned in a very simple way which is screen_number=0 for first screen,screen_number=1 for second,screen_number=2 for third and so on but as I said... I can't test wheather it's true and even if I had multiple screens how could I be sure that it works like this for all computers .Please ,if anyone of you has more experience with X11 and knows all details about how it works,tell me if I am right.
The ScreenCount(dpy) macro and int XScreenCount(Display*) function both return the number of screens connected to the display. Valid screen numbers are 0 to ScreenCount(dpy)-1. Macros in Xlib.h confirm:
#define ScreenCount(dpy) (((_XPrivDisplay)dpy)->nscreens)
#define ScreenOfDisplay(dpy, scr) (&((_XPrivDisplay)dpy)->screens[scr])
Your source (2.2.1. Display Macros) provides enough information. Normally the default screen-number is 0, e.g., when connecting to the local host you could use :0.0 as indicated in the documentation for XOpenDisplay.
That is "normally". If you run VNC, normally that runs on a different display (the first 0 in the simple connection string shown).
But (reading the documentation), when an application calls XOpenDisplay, it asks for the given screen-number (which the X server may/may not honor):
screen_number
Specifies the screen to be used on that server. Multiple screens can be controlled by a single X server. The screen_number sets an internal variable that can be accessed by using the DefaultScreen() macro or the XDefaultScreen() function if you are using languages other than C (see "Display Macros").
I'm working on supporting of the TCL (thermal control protocol, stupid name, its a printer protocol of futurelogic) but i cannot find resources about this protocol, how it is, how it works, nothing, on theirs site i only found this mention http://www.futurelogic-inc.com/trademarks.aspx
any one had worked with it? does any one knows where can i find the data sheet?
The protocol is documented on their website http://www.futurelogic-inc.com/support/downloads/
If you are targetting the PSA66ST model it supports a number of protocols TCL, which is quite nice for delivering templated tickets and, line printing using the Epson ESC/P protocol.
This is all explained in the protocol document.
Oops, these links are incorrect and only correspond to marketing brochures. You will need to contact Futurelogic for the protocol documents. Probably also need to sign an NDA. Anyway, the information may guide you some more.
From what I can gather, it seems the FutureLogic thermal printers do not support general printing, but only printing using predefined templates stored in the printer's firmware. The basic command structure is a caret ^ followed by a one or two character command code, with arguments delimited using a pipe |, and the command ended with another caret ^. I've been able to reverse-engineer a few commands:
^S^ - Printer status
^Se^ - Extended printer status
^C|x|^ - Clear. Known arguments:
a - all
j - jam
^P|x|y0|...|yn|^ - Print fields y0 through yn using template x.
Data areas are defined in the firmware using a similar command format, command ^D|x|y0|...|yn|^, and templates are defined from data areas using command ^T|z|x0|...|xn|^.