Here is the xml file, Tag test-methode contains name=reEnterURL is repeat with each test. i dont want to pass this value to elastic search. Only status=pass name=newProfile is required to pass elastic search.
</test-method>
<test-method status="PASS" signature="reEnterURL()[pri:0, instance:testSuite.DriverScript_Transformation#6fc757]" name="reEnterURL" is-config="true" duration-ms="1107" started-at="2015-12-30T15:55:24Z" finished-at="2015-12-30T15:55:26Z">
<reporter-output>
</reporter-output>
</test-method>
<test-method status="PASS" signature="newProfile()[pri:0,instance:testSuite.DriverScript_Transformation#6fc757]" name="newProfile" duration-ms="818999" started-at="2015-12-30T15:55:26Z" finished-at="2015-12-30T16:09:05Z">
<reporter-output>
</reporter-output>
</test-method>
Here is the conf file:
input {
file {
path=>["file-path/testng-result.xml"]
start_position =>"beginning"
type =>suitefile
}
}
filter
{
if[type]=="suitefile"
{
xml
{
source =>"message"
remove_namespaces => "true"
xpath => ["//test-method/#name","Name",
"//test-method/#status", "Status"]
store_xml => false
}
}
}
output {
stdout { codec => rubydebug}
elasticsearch_http{
host => "ip address"
}
}
Related
when using logstash I see an error like this one :
[2019-03-14T12:59:39,516][WARN ][logstash.codecs.plain ]
Received an event that has a different character encoding than you configured.
{
:text=>"08/02/2019 22:45:06 || : Service Reglement, ValiderReglementBilling:Echec de validation de r\\xE9glement dans NaviBilling. Transaction N\\xB0: 20194160773This message is for C/AL programmers: The call to member CreationFacture failed: Input string was not in a correct format..\\r",
:expected_charset=>"UTF-8"
}
I do not know what codec should be used for the correct format of events ?? The problem is in the subject field.
my logstash.conf is :
input {
file {
path => "D:\ELK\log\WCF-08-02-2019-7e8b53db-Error.log"
start_position => "beginning"
}
filter {
grok {
match => {
"message" => ["%{DATESTAMP:time} \|\| :%{DATA:Name_Service}:%{DATA:Action}: %{GREEDYDATA:Gravity}",
"%{DATESTAMP:time} \|\| :%{DATA:Name_Service},%{DATA:Action}: %{GREEDYDATA:Gravity}",
"%{DATESTAMP:time} \|\| :%{DATA:Name_Service}, %{DATA:Action}: %{GREEDYDATA:Gravity}"
]
}
}
}
output {
elasticsearch {
action => "index"
hosts => "http://localhost:9200"
index => "logstash-pfe2-%{+YYYY.MM.dd}"
}
}
Data missed a lot in logstash version 5.0,
is it a serous bug ,when a config the config file so many times ,it useless,data lost happen again and agin, how to use logstash to collect log event property ?
any reply will thankness
Logstash is all about reading logs from specific location and based on you interested information you can create index in elastic search or other output also possible.
Example of logstash conf
input {
file {
# PLEASE SET APPROPRIATE PATH WHERE LOG FILE AVAILABLE
#type => "java"
type => "json-log"
path => "d:/vox/logs/logs/vox.json"
start_position => "beginning"
codec => json
}
}
filter {
if [type] == "json-log" {
grok {
match => { "message" => "UserName:%{JAVALOGMESSAGE:UserName} -DL_JobID:%{JAVALOGMESSAGE:DL_JobID} -DL_EntityID:%{JAVALOGMESSAGE:DL_EntityID} -BatchesPerJob:%{JAVALOGMESSAGE:BatchesPerJob} -RecordsInInputFile:%{JAVALOGMESSAGE:RecordsInInputFile} -TimeTakenToProcess:%{JAVALOGMESSAGE:TimeTakenToProcess} -DocsUpdatedInSOLR:%{JAVALOGMESSAGE:DocsUpdatedInSOLR} -Failed:%{JAVALOGMESSAGE:Failed} -RecordsSavedInDSE:%{JAVALOGMESSAGE:RecordsSavedInDSE} -FileLoadStartTime:%{JAVALOGMESSAGE:FileLoadStartTime} -FileLoadEndTime:%{JAVALOGMESSAGE:FileLoadEndTime}" }
add_field => ["STATS_TYPE", "FILE_LOADED"]
}
}
}
filter {
mutate {
# here converting data type
convert => { "FileLoadStartTime" => "integer" }
convert => { "RecordsInInputFile" => "integer" }
}
}
output {
elasticsearch {
# PLEASE CONFIGURE ES IP AND PORT WHERE LOG DOCs HAS TO PUSH
document_type => "json-log"
hosts => ["localhost:9200"]
# action => "index"
# host => "localhost"
index => "locallogstashdx_new"
# workers => 1
}
stdout { codec => rubydebug }
#stdout { debug => true }
}
To know more you can go throw many available websites like
https://www.elastic.co/guide/en/logstash/current/first-event.html
I am trying to parse
[7/1/05 13:41:00:516 PDT]
This is the configuration grok I have written for the same :
\[%{DD/MM/YY HH:MM:SS:S Z}\]
With the date filter :
input {
file {
path => "logstash-5.0.0/bin/sta.log"
start_position => "beginning"
}
}
filter {
grok {
match =>" \[%{DATA:timestamp}\] "
}
date {
match => ["timestamp","DD/MM/YY HH:MM:SS:S ZZZ"]
}
}
output {
stdout{codec => "json"}
}
above is the configuration I have used.
And consider this as my sta.log file content:
[7/1/05 13:41:00:516 PDT]
Getting this error :
[2017-01-31T12:37:47,444][ERROR][logstash.agent ] fetched an invalid config {:config=>"input {\nfile {\npath => \"logstash-5.0.0/bin/sta.log\"\nstart_position => \"beginning\"\n}\n}\nfilter {\ngrok {\nmatch =>\"\\[%{DATA:timestamp}\\]\"\n}\ndate {\nmatch => [\"timestamp\"=>\"DD/MM/YY HH:MM:SS:S ZZZ\"]\n}\n}\noutput {\nstdout{codec => \"json\"}\n}\n\n", :reason=>"Expected one of #, {, ,, ] at line 12, column 22 (byte 184) after filter {\ngrok {\nmatch =>\"\\[%{DATA:timestamp}\\]\"\n}\ndate {\nmatch => [\"timestamp\""}
Can anyone help here?
You forgot to specify the input for your grokfilter. A correct configuration would look like this:
input {
file {
path => "logstash-5.0.0/bin/sta.log"
start_position => "beginning"
}
}
filter {
grok {
match => {"message" => "\[%{DATA:timestamp} PDT\]"}
}
date {
match => ["timestamp","dd/MM/yy HH:mm:ss:SSS"]
}
}
output {
stdout{codec => "json"}
}
For further reference check out the grok documentation here.
I am using logstash for the first time and trying to setup a simple pipeline for just printing the nginx logs. Below is my config file
input {
file {
path => "/var/log/nginx/*access*"
}
}
output {
stdout { codec => rubydebug }
}
I have saved the file as /opt/logstash/nginx_simple.conf
And trying to execute the following command
sudo /opt/logstash/bin/logstash -f /opt/logstash/nginx_simple.conf
However the only output I can see is:
Logstash startup completed
Logstash shutdown completed
The file is not empty for sure. As per my understanding I should be seeing the output on my console. What am I doing wrong ?
Make sure that the character encoding of your logfile is UTF-8. If it is not, try to change it and restart the Logstash.
Please try this code as your Logstash configuration, in order to setup a simple pipeline for just printing the nginx logs.
input {
file {
path => "/var/log/nginx/*.log"
type => "nginx"
start_position => "beginning"
sincedb_path=> "/dev/null"
}
}
filter {
if [type] == "nginx" {
grok {
patterns_dir => "/home/krishna/Downloads/logstash-2.1.0/pattern"
match => {
"message" => "%{NGINX_LOGPATTERN:data}"
}
}
}
date {
match => [ "timestamp" , "dd/MMM/yyyy:HH:mm:ss Z" ]
}
}
output {
elasticsearch {
hosts => [ "127.0.0.1:9200" ]
}
stdout { codec => rubydebug }
}
I am trying to get logstash to parse key-value pairs in an HTTP get request from my ELB log files.
the request field looks like
http://aaa.bbb/get?a=1&b=2
I'd like there to be a field for a and b in the log line above, and I am having trouble figuring it out.
My logstash conf (formatted for clarity) is below which does not load any additional key fields. I assume that I need to split off the address portion of the URI, but have not figured that out.
input {
file {
path => "/home/ubuntu/logs/**/*.log"
type => "elb"
start_position => "beginning"
sincedb_path => "log_sincedb"
}
}
filter {
if [type] == "elb" {
grok {
match => [ "message", "%{TIMESTAMP_ISO8601:timestamp}
%{NOTSPACE:loadbalancer} %{IP:client_ip}:%{NUMBER:client_port:int}
%{IP:backend_ip}:%{NUMBER:backend_port:int}
%{NUMBER:request_processing_time:float}
%{NUMBER:backend_processing_time:float}
%{NUMBER:response_processing_time:float}
%{NUMBER:elb_status_code:int}
%{NUMBER:backend_status_code:int}
%{NUMBER:received_bytes:int} %{NUMBER:sent_bytes:int}
%{QS:request}" ]
}
date {
match => [ "timestamp", "ISO8601" ]
}
kv {
field_split => "&?"
source => "request"
exclude_keys => ["callback"]
}
}
}
output {
elasticsearch { host => localhost }
}
kv will take a URL and split out the params. This config works:
input {
stdin { }
}
filter {
mutate {
add_field => { "request" => "http://aaa.bbb/get?a=1&b=2" }
}
kv {
field_split => "&?"
source => "request"
}
}
output {
stdout {
codec => rubydebug
}
}
stdout shows:
{
"request" => "http://aaa.bbb/get?a=1&b=2",
"a" => "1",
"b" => "2"
}
That said, I would encourage you to create your own versions of the default URI patterns so that they set fields. You can then pass the querystring field off to kv. It's cleaner that way.
UPDATE:
For "make your own patterns", I meant to take the existing ones and modify them as needed. In logstash 1.4, installing them was as easy as putting them in a new file the 'patterns' directory; I don't know about patterns for >1.4 yet.
MY_URIPATHPARAM %{URIPATH}(?:%{URIPARAM:myuriparams})?
MY_URI %{URIPROTO}://(?:%{USER}(?::[^#]*)?#)?(?:%{URIHOST})?(?:%{MY_URIPATHPARAM})?
Then you could use MY_URI in your grok{} pattern and it would create a field called myuriparams that you could feed to kv{}.