Let's say I have the following (example) code in combined.js:
/* jQuery, Moment.js, Bootstrap, etc. */
Child.prototype.doSchool = function(data) { // Bookmarked
var essay = data.essay || {};
if (essay) {
var spelling = checkSpelling(essay, EN_US_GRADE_7);
return spelling.grade();
}
}
/* Extensive and Turing-complete code base */
var burt = new Child();
if (burt.doSchool({essay: "i like trains"}) < .65) burt.comfort(); // Bookmarked
/* jQuery extensions, Fallout 4, etc. */
The file is bookmarked in Komodo Edit 9.3.x in the locations marked by // inline comments.
Any /* block comments */ indicate thousands of lines of code.
The source between the bookmarks exists in another file, school.inc.js. I want to know if there is an easy way to select all the text between the bookmarks, so that combined.js can be easily updated by pasting the contents of school.inc.js over it without having to use a combining utility.
There is no built in way to do this but you could possible do it by writing a Userscript.
You'll want to use the Komodo Editor SDK.
// This assumes you're running the Userscript starting at the first bookmark
var editor = require("ko/editor");
var startSelect;
var endSelect;
var done = false;
function selectBookmarkRegion(){
if(editor.bookmarkExists()) { // check if bookmark is set on current line
startSelect = { // save it's line start
line: editor.getLineNumber(),
ch: 0
};
} else {
alert("Start me on a line with a Bookmark");
}
editor.goLineDown();
while(!done){
if(editor.bookmarkExists())
{
endSelect = {
line: editor.getLineNumber(),
ch: editor.getLineSize()
};// Save line end
done = true;
}
editor.goLineDown();
// found a bug as I was writing this. Will be fixed in the next releases
if (editor.getLineNumber() + 1 == editor.lineCount())
{
done = true;
}
}
editor.setSelection(startSelect, endSelect); // Wrap the selection
}
selectBookmarkRegion();
Related
Is there any way to customize the Nav Bar or the Header to have a custom link?
The use-case is that I have a JIRA issue collector that is driven by javascript. I would like the user to provide feedback from the page they are having issues. However, any solution I can come up with so far takes the user away from the current page.
Example of what I have that takes the user away:
I currently have a Suitelet that is in one of the menus. That Suitelet invokes javascript but even then the user is taken away.
I have a workflow on the case record that calls some Javascript Javascript in one of the UI-based action's conditions is invoked. Similar to #1 but on the case record.
I'm thinking I'm going to need to create and public a chrome extension for my company's domain just to get a pervasive bit of javascript to run for all pages...seems like a sledgehammer.
I hope someone can prove me wrong, but as far as I am aware there is no way to natively inject Javascript or anything into the NetSuite header/navbar - they don't offer customisation to the header/navbar.
I've resorted to creating a Userscript that I load through the Violent Monkey extension for Chrome or Firefox.
Example Userscript Template
// ==UserScript==
// #name NetSuite Mods (Example)
// #namespace Violentmonkey Scripts
// #match *.netsuite.com/*
// #include *.netsuite.com/*
// #grant GM_addStyle
// #version 1.0
// #author Kane Shaw - https://stackoverflow.com/users/4561907/kane-shaw
// #description 6/11/2020, 6:25:20 PM
// ==/UserScript==
// Get access to some commonly used NLAPI functions without having to use "unsafeWindow.nlapi..." in our code
// You can add more of these if you need access to more of the functions contained on the NetSuite page
nlapiSetFieldText = unsafeWindow.nlapiSetFieldText;
nlapiSetFieldValue = unsafeWindow.nlapiSetFieldValue;
nlapiGetFieldText = unsafeWindow.nlapiGetFieldText;
nlapiGetFieldValue = unsafeWindow.nlapiGetFieldValue;
nlapiSearchRecord = unsafeWindow.nlapiSearchRecord;
nlobjSearchFilter = unsafeWindow.nlobjSearchFilter;
nlapiLookupField = unsafeWindow.nlapiLookupField;
nlapiLoadRecord = unsafeWindow.nlapiLoadRecord;
nlapiSubmitRecord = unsafeWindow.nlapiSubmitRecord;
GM_pageTransformations = {};
/**
* The entrypoint for our userscript
*/
function GM_main(jQuery) {
// We want to execute these on every NetSuite page
GM_pageTransformations.header();
GM_pageTransformations.browsertitle();
// Here we build a function name from the path (page being accessed on the NetSuite domain)
var path = location.pathname;
if(path.indexOf('.')>-1) path = path.substr(0,path.indexOf('.'));
path = toCamelCase(path,'/');
// Now we check if a page "GM_pageTransformations" function exists with a matching name
if(GM_pageTransformations[path]) {
console.log('Executing GM_pageTransformations for '+path);
GM_pageTransformations[path]();
} else {
console.log('No GM_pageTransformations for '+path);
}
}
/**
* Changes the header on all pages
*/
GM_pageTransformations['header'] = function() {
// For example, lets make the header background red
GM_addStyle('#ns_header, #ns_header * { background: red !important; }');
}
/**
* Provides useful browser/tab titles for each NetSuite page
*/
GM_pageTransformations['browsertitle'] = function() {
var title = jQuery('.uir-page-title-secondline').text().trim();
var title2 = jQuery('.uir-page-title-firstline').text().trim();
var title3 = jQuery('.ns-dashboard-detail-name').text().trim();
if(title != '') {
document.title = title+(title2 ? ': '+title2 : '')+(title3 ? ': '+title3 : '');
} else if(title2 != '') {
document.title = title2+(title3 ? ': '+title3 : '');
} else if(title3 != '') {
document.title = title3;
}
}
/**
* Changes app center card pages (dashboard pages)
*/
GM_pageTransformations['appCenterCard'] = function() {
// For example, lets make add a new heading text on all Dashboard pages
jQuery('#ns-dashboard-page').prepend('<h1>My New Dashboard Title</h1>');
}
/**
* Convert a given string into camelCase, or CamelCase
* #param {String} string - The input stirng
* #param {String} delimter - The delimiter that seperates the words in the input string (default " ")
* #param {Boolean} capitalizeFirstWord - Wheater or not to capitalize the first word (default false)
*/
function toCamelCase(string, delimiter, capitalizeFirstWord) {
if(!delimiter) delimiter = ' ';
var pieces = string.split(delimiter);
string = '';
for (var i=0; i<pieces.length; i++) {
if(pieces[i].length == 0) continue;
string += pieces[i].charAt(0).toUpperCase() + pieces[i].slice(1);
}
if(!capitalizeFirstWord) string= string.charAt(0).toLowerCase()+string.slice(1);
return string;
}
// ===============
// CREDIT FOR JQUERY INCLUSION CODE: Brock Adams # https://stackoverflow.com/a/12751531/4561907
/**
* Check if we already have a local copy of jQuery, or if we need to fetch it from a 3rd-party server
*/
if (typeof GM_info !== "undefined") {
console.log("Running with local copy of jQuery!");
GM_main(jQuery);
}
else {
console.log ("fetching jQuery from some 3rd-party server.");
add_jQuery(GM_main, "1.9.0");
}
/**
* Add the jQuery into our page for our userscript to use
*/
function add_jQuery(callbackFn, jqVersion) {
var jqVersion = jqVersion || "1.9.0";
var D = document;
var targ = D.getElementsByTagName ('head')[0] || D.body || D.documentElement;
var scriptNode = D.createElement ('script');
scriptNode.src = 'https://ajax.googleapis.com/ajax/libs/jquery/'
+ jqVersion
+ '/jquery.min.js'
;
scriptNode.addEventListener ("load", function () {
var scriptNode = D.createElement ("script");
scriptNode.textContent =
'var gm_jQuery = jQuery.noConflict (true);\n'
+ '(' + callbackFn.toString () + ')(gm_jQuery);'
;
targ.appendChild (scriptNode);
}, false);
targ.appendChild (scriptNode);
}
You can copy and paste that code as-is into a new Userscript and it will do the following:
Make Browser tabs/windows have useful titles (shows order numbers, customer names, vendor names etc - not just "Sales Order")
Change the header background to red (as an example)
Add a new heading to the top of all "Dashboard" pages that says "My New Dashboard Title" (as an example)
I would like to put the title + artist name when the song is playing, but I don't know how to achieve this, because with almost 30-35 songs, it would be long and boring to create a specific text layer for each song.
If there is a trick to achieve this quickly.
You can achieve this via scripting.
I have these two scripts that should do what you want. I wrote them some time ago. Maybe you need to do some adjustments.
This one adds several text layers from a csv file.
https://github.com/fabiantheblind/after-effects-script-snippets/blob/master/comp_with_text.jsx
This one should add one text layer with the source text set to the content of a csv.
https://github.com/fabiantheblind/after-effects-script-snippets/blob/master/text_to_comp.jsx
This is a minimal example to add a text layer with sourceText
/**
* main function
*/
var main = function() {
var txt = ['Hello - World', 'dog -cat', 'foo - bah']; // the text to add
app.beginUndoGroup('add source text'); // open a undo group
var curComp = app.project.activeItem; // get the current comp
// check if the curent active item is a comp
if (!curComp || !(curComp instanceof CompItem)) {
alert('noComp');
return;
// end if no comp is active
}
var txtLayer = curComp.layers.addText('titles'); // add a text layer
var counter = 0; // the time to add a keyframe to (in seconds)
// loop the text
for (var i = 0; i < txt.length; i++) {
var curFrame = (counter / curComp.frameRate); // calc time for each frame
$.writeln(curFrame);
// add a keyframe with the text as value every frame
txtLayer.text.sourceText.setValueAtTime(curFrame, txt[i]);
counter++; // increase the time by one
}
app.endUndoGroup();
};
main();
I am writing a Chrome extension that saves/restores your browsers window state - So, I save the state of a given window:
var properties = [ "top",
"left",
"width",
"height",
"incognito",
"focused",
"type"
];
var json = {};
var cache = chrome_window_object;
// copy only the keys we care about:
_.each(properties,function(key,value) {
json[key] = cache[key];
});
// then copy the URLs of the tabs, if they exist:
if(cache.tabs) {
json.url = [];
_.each(cache.tabs,function(tab) {
json.url.push(tab.url);
});
}
return json;
At some point in the future, I remove all windows:
closeAllWindows: function(done_callback) {
function got_all(windows) {
var index = 0;
// use a closure to only close one window at a time:
function close_next() {
if(windows.length <= index) return;
var window = windows[index++];
chrome.windows.remove(window,close_next);
}
// start closing windows:
close_next();
}
chrome.windows.getAll(got_all);
}
and then I restore the window using:
chrome.windows.create(json_from_before);
The window that is created has an extra tab in it, whatever was in the window that I just closed... I am completely floored, and I assume the problem is something that I am doing in the code that I haven't posted (it's a big extension). I've spent a few hours checking code line by line and making sure I'm not explicitly asking for this tab to be created. So - has anybody seen anything like this before?
My extension adds a context menu whenever a user selects some text on the page.
Then, using info.selectionText, I use the selected text on a function executed whenever the user selects one of the items from my context menu. (from http://code.google.com/chrome/extensions/contextMenus.html)
So far, all works ok.
Now, I got this cool request from one of the extension users, to execute that same function once per line of the selected text.
A user would select, for example, 3 lines of text, and my function would be called 3 times, once per line, with the corresponding line of text.
I haven't been able to split the info.selectionText so far, in order to recognize each line...
info.selectionText returns a single line of text, and could not find a way to split it.
Anyone knows if there's a way to do so? is there any "hidden" character to use for the split?
Thanks in advance... in case you're interested, here's the link to the extension
https://chrome.google.com/webstore/detail/aagminaekdpcfimcbhknlgjmpnnnmooo
Ok, as OnClickData's selectionText is only ever going to be text you'll never be able to do it using this approach.
What I would do then is inject a content script into each page and use something similar to the below example (as inspired by reading this SO post - get selected text's html in div)
You could still use the context menu OnClickData hook like you do now but when you receive it instead of reading selectionText you use the event notification to then trigger your context script to read the selection using x.Selector.getSelected() instead. That should give you what you want. The text stays selected in your extension after using the context menu so you should have no problem reading the selected text.
if (!window.x) {
x = {};
}
// https://stackoverflow.com/questions/5669448/get-selected-texts-html-in-div
x.Selector = {};
x.Selector.getSelected = function() {
var html = "";
if (typeof window.getSelection != "undefined") {
var sel = window.getSelection();
if (sel.rangeCount) {
var container = document.createElement("div");
for (var i = 0, len = sel.rangeCount; i < len; ++i) {
container.appendChild(sel.getRangeAt(i).cloneContents());
}
html = container.innerHTML;
}
} else if (typeof document.selection != "undefined") {
if (document.selection.type == "Text") {
html = document.selection.createRange().htmlText;
}
}
return html;
}
$(document).ready(function() {
$(document).bind("mouseup", function() {
var mytext = x.Selector.getSelected();
alert(mytext);
console.log(mytext);
});
});
http://jsfiddle.net/richhollis/vfBGJ/4/
See also: Chrome Extension: how to capture selected text and send to a web service
Has anyone discovered a way to extend or modify the functionality of the SharePoint Datasheet view (the view used when you edit a list in Datasheet mode, the one that looks like a basic Excel worksheet)?
I need to do several things to it, if possible, but I have yet to find a decent non-hackish way to change any functionality in it.
EDIT: An example of what I wish to do is to enable cascading filtering on lookup fields - so a choice in one field limits the available choices in another. There is a method to do this in the standard view form, but the datasheet view is completely seperate.
Regards
Moo
I don't think you can modify it in any non-hackish way, but you can create a new datasheet view from scratch. You do this by creating a new ActiveX control, and exposing it as a COM object, and modifying the web.config file to make reference to the new ActiveX control.
There's an example here:
Creating a custom datasheet control.
Actually, you can do this. Here is a code snippet I stripped out of someplace where I am doing just what you asked. I tried to remove specifics.
var gridFieldOverrideExample = (function (){
function fieldView(ctx){
var val=ctx.CurrentItem[curFieldName];
var spanId=curFieldName+"span"+ctx.CurrentItem.ID;
if (ctx.inGridMode){
handleGridField(ctx, spanId);
}
return "<span id='"+spanId+"'>"+val+"</span>";
}
function handleGridField(ctx, spanID){
window.SP.SOD.executeOrDelayUntilScriptLoaded(function(){
window.SP.GanttControl.WaitForGanttCreation(function (ganttChart){
var gridColumn = null;
var editID = "EDIT_"+curFieldName+"_GRID_FIELD";
var columns = ganttChart.get_Columns();
for(var i=0;i<columns.length;i++){
if(columns[i].columnKey == curFieldName){
gridColumn = columns[i];
break;
}
}
if (gridColumn){
gridColumn.fnGetEditControlName = function(record, fieldKey){
return editID;
};
window.SP.JsGrid.PropertyType.Utils.RegisterEditControl(editID, function (ctx) {
editorInstance = new SP.JsGrid.EditControl.EditBoxEditControl(ctx, null);
editorInstance.NewValue = "";
editorInstance.SetValue = function (value) {
_cellContext = editorInstance.GetCellContext();
_cellContext.SetCurrentValue({ localized: value });
};
editorInstance.Unbind = function () {
//This happens when the grid cell loses focus - hide controls here, do cleanup, etc.
}
//Below I grabbed a reference to the original 'BindToCell' function so I can prepend to it by overwriting the event.
var origbtc = editorInstance.BindToCell;
editorInstance.BindToCell = function(cellContext){
if ((cellContext.record) &&
(cellContext.record.properties) &&
(cellContext.record.properties.ID) &&
(cellContext.record.properties.ID.dataValue)){
editorInstance.ItemID = cellContext.record.properties.ID.dataValue;
}
origbtc(cellContext);
};
//Below I grabbed a reference to the original 'OnBeginEdit' function so I can prepend to it by overwriting the event.
var origbte = editorInstance.OnBeginEdit;
editorInstance.TargetID;
editorInstance.OnBeginEdit = function (cellContext){
this.TargetID = cellContext.target.ID;
/*
. . .
Here is where you would include any custom rendering
. . .
*/
origbte(cellContext);
};
return editorInstance;
}, []);
}
});
},"spgantt.js");
}
return{
fieldView : fieldView
}
})();
(function () {
function OverrideFields(){
var overrideContext = {};
overrideContext.Templates = overrideContext.Templates || {};
overrideContext.Templates.Fields = {
'FieldToOverride' : {
'View': gridFieldOverrideExample.fieldView
}
};
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(overrideContext);
}
ExecuteOrDelayUntilScriptLoaded(OverrideFields, 'clienttemplates.js');
})();
Also, there are a couple of other examples out there. Sorry, I don't have the links anymore: