Related
The . key can be used to repeat the last insert command. However, we might do some navigation that is not part of the insert, but we want it repeated.
Imagine commenting out lines like so:
// line of text
// line of text
line of text
line of text
The insert command is to put the two forward slashes and a space. That can be repeated using the . key. The navigation would be to navigate down one line and then left some number of characters. That part is not captured by the . key command.
How can we achieve this functionality? I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
Press qX, where X is any of the writable registers (typically: pick any lowercase letter).
Do whatever actions you want to record.
Press q again to stop recording.
Press #X (where X is the same register) to play it back (count times, if used with a count).
Press ## to replay the most recently used macro (count times).
I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
If the Vim docs are to be believed, Vi did not support recording (steps 1-3), but did support #. Then you would have to manually yank the characters into the target register with "Xy<motion> or some other register-writing command. That also works under Vim, but I can't recommend it because it is much more error prone.
Another approach would be "block select then edit" approach:
ctrl + v - block select
then go down j or down-arrow
shift + i will put you in insert mode. Make the change here where you want it to be reflected on all the other lines you've selected.
esc twice will show/repeat that change you made on the line one.
If you have a big range of similar lines and want to put // at the beginning of it, you can do something like:
:15,25norm! I//<space>
You can also use visual area (vip selects an entire paragraph)
:'<,'>norm! I//<space>
using a pattern
:g/TODO/norm! I//<space>
Let's say I've typed "abcdefg", with the cursor at the end. I want to delete back to the c, so that I only have "abc" left.
Is there a command like d that includes the current character? I know I could do dTcx, but the x feels like a work-around and I suppose there's a better solution.
No. Backward motions always start on the left of the current character for c, y and d which is somehow logical but also unnerving.
The only "clean" solutions I could think of either imply moving to the char after c first and then do a forward delete:
Tcde
or using visual mode:
vTcd
v3hd
But, given your sample and assuming you are entering normal mode just for that correction, the whole thing sounds extremely wasteful to me.
What about staying in insert mode and simply doing ←←←←?
try this:
TcD
this will leave abc for your example... well if the abcdefg is the last word of the line.
if it is not the last word in that line, you may do:
ldTc
or golfing, do it within 3 key-stroke:
3Xx or l4X
See this answer to a similar question : there is a setting to be allowed to go beyond the end of the line
From the doc :
Virtual editing means that the cursor can be positioned where there is
no actual character. This can be halfway into a tab or beyond the end
of the line. Useful for selecting a rectangle in Visual mode and
editing a table.
"onemore" is not the same, it will only allow moving the cursor just
after the last character of the line. This makes some commands more
consistent. Previously the cursor was always past the end of the line
if the line was empty. But it is far from Vi compatible. It may also
break some plugins or Vim scripts. For example because |l| can move
the cursor after the last character. Use with care!
Using the $ command will move to the last character in the line, not
past it. This may actually move the cursor to the left!
The g$ command will move to the end of the screen line.
It doesn't make sense to combine "all" with "onemore", but you will
not get a warning for it.
In short, you could try :set virtualedit=onemore, and see if your environment is stable or not with it.
Use d?c
That will start d mode, search back to 'c' and then delete up to your cursor position.
Edit: nope, that does not include current position...
I may be misunderstanding your request, but does 3hd$ do it?
I would use vFdd in this example. I think it's nicer than the other solutions since the command explicitly shows what to delete. It includes the current character and the specified character when deleting.
v: enter visual mode (mark text)
F: find/goto character backwards
d: the character "d" that will be included for removal.
d: delete command
Since it is visual mode, the cursor can also be moved before executing the actual removal d. This makes the command powerful even for deleting up to a non unique character by first marking a special character close to the character and then adjusting the position.
I may have a unique situation here. I want gVim (gui version, in Linux) to keep concealed characters concealed no matter what, even when the cursor is on that line or that character gets selected. (It should be as close to if the characters never existed as possible.) Currently the concealed characters show themselves when the cursor enters that line, which causes text to jump around when scrolling and when selecting text.
We are using gView (read-only gVim) to view logs, so as to take advantage of its robust syntax highlighting. Problem is, these logs contain lots of escape characters and TTY color codes, that make reading difficult. (^[33mSomeText^[0m)
I'm using this line to hide them:
syntax match Ignore /\%o33\[[0-9]\{0,5}m/ conceal
Since the files are viewed by non-vim-experts, it looks glitchy and broken when the text un-conceals itself. (And also looks glitchy and broken if the color codes are present, and also looks glitchy and broken if the color codes are blacked-out to become invisible, but still show when selected and appear after copy/paste.)
This should be fine because these files are opened read-only in gview, with an extra set nomodifiable making it even more difficult to save the file. While it's possible to edit and attempt to save the logs, doing so is considered both an invalid thing to do, and a harmless thing to do, and requires enough Vim skills that if someone manages to edit a file they know what they're doing. The problem with being able to edit a line with concealed text does not apply.
If 'conceal' can't be configured to keep hidden text hidden no matter what, an acceptable alternative would be to replace the TTY color codes with whitespace when the file gets opened. But, this has to be done in read-only mode, and we can't have gview throwing up a save dialog on closing the window because the file has been modified by its .vimrc.
Note: I am in full control of the .vim script file sourced when these are read, but cannot control the existence of the TTY color codes or the code that opens the log files in gview. (i.e. I can't pass it through sed or anything like that.) The ideal solution is anything that can transparently nuke the color codes from within a .vimrc, but I'll hear any suggestions. The 'conceal' feature is just my most promising lead.
So, any ideas how to permanently get rid of these on file view without dialogs popping up on close?
:help conceal
When the "conceal" argument is given, the item is marked as concealable.
Whether or not it is actually concealed depends on the value of the
'conceallevel' option. The 'concealcursor' option is used to decide whether
concealable items in the current line are displayed unconcealed to be able to
edit the line.
:help concealcursor
Sets the modes in which text in the cursor line can also be concealed.
When the current mode is listed then concealing happens just like in
other lines.
n Normal mode
v Visual mode
i Insert mode
c Command line editing, for 'incsearch'
'v' applies to all lines in the Visual area, not only the cursor.
A useful value is "nc". This is used in help files. So long as you
are moving around text is concealed, but when starting to insert text
or selecting a Visual area the concealed text is displayed, so that
you can see what you are doing.
Keep in mind that the cursor position is not always where it's
displayed. E.g., when moving vertically it may change column.
Also, :help conceallevel
Determine how text with the "conceal" syntax attribute |:syn-conceal|
is shown:
Value Effect ~
0 Text is shown normally
1 Each block of concealed text is replaced with one
character. If the syntax item does not have a custom
replacement character defined (see |:syn-cchar|) the
character defined in 'listchars' is used (default is a
space).
It is highlighted with the "Conceal" highlight group.
2 Concealed text is completely hidden unless it has a
custom replacement character defined (see
|:syn-cchar|).
3 Concealed text is completely hidden.
Only one command is needed: set concealcursor=n
I might have a better idea—you can pass it through sed (using %!sed) or really do a bunch of other :substitute commands—whatever edits you need to get rid of the color codes.
When you’re done, make sure to set nomodified—this forces vim to think there haven’t been any changes!
In Unix the ^ allows you to repeat a command with some text substituted for new text. For example:
csh% grep "stuff" file1 >> Results
grep "stuff" file1
csh% ^file1^file2^
grep "stuff" file2
csh%
Is there a Vim equivalent? There are a lot of times I find myself editing minor things on the command line over and over again.
Specifically for subsitutions: use & to repeat your last substitution on the current line from normal mode.
To repeat for all lines, type :%&
q: to enter the command-line window (:help cmdwin).
You can edit and reuse previously entered ex-style commands in this window.
Once you hit :, you can type a couple characters and up-arrow, and it will character-match what you typed. e.g. type :set and it will climb back through your "sets". This also works for search - just type / and up-arrow. And /abc up-arrow will feed you matching search strings counterchronologically.
There are 2 ways.
You simply hit the . key to perform an exact replay of the very last command (other than movement). For example, I type cw then hello to change a word to "hello". After moving my cursor to a different word, I hit . to do it again.
For more advanced commands like a replace, after you have performed the substition, simply hit the : key then the ↑ up arrow key, and it fills your command line with the same command.
To repeat the previous substition on all lines with all of the same flags you can use the mapping g&.
If you have made a substitution in either normal mode :s/A/B/g (the current line) or visual mode :'<,>'s/A/B/g (lines included in the current selection) and you want to repeat that last substitution, you can:
Move to another line (normal mode) and simply press &, or if you like, :-&-<CR> (looks like :&), to affect the current line without highlighting, or
Highlight a range (visual mode) and press :-&-<CR> (looks like :'<,'>&) to affect the range of lines in the selection.
With my limited knowledge of Vim, this solves several problems. For one, the last visual substitution :'<,'>s/A/B/g is available as the last command (:-<UP>) from both normal and visual mode, but always produces an error from normal mode. (It still refers to the last selection from visual mode - not to the empty selection at the cursor like I assumed - and my example substitution exhausts every match in one pass.) Meanwhile, the last normal mode substitution starts with :s, not :'<,'>s, so you would need to modify it to use in visual mode. Finally, & is available directly from normal mode and so it accepts repetitions and other alternatives to selections, like 2& for the next two lines, and as user ruohola said, g& for the entire file.
In both versions, pressing : then & works as if you had pressed : and then retyped s/A/B/, so the mode you were in last time is irrelevant and only the current cursor line or selection determines the line(s) to be affected. (Note that the trailing flags like g are cleared too, but come next in this syntax too, as in :&g/: '<,'>&g. This is a mixed blessing in my opinion, as you can/must re-specify flags here, and standalone & doesn't seem to take flags at all. I must be missing something.)
I welcome suggestions and corrections. Most of this comes from experimentation just now so I'm sure there's a lot more to it, but hopefully it helps anyway.
Take a look at this: http://vim.wikia.com/wiki/Using_command-line_history for explanation.
Selecting a large amount of text that extends over many screens in an IDE like Eclipse is fairly easy since you can use the mouse, but what is the best way to e.g. select and delete multiscreen blocks of text or write e.g. three large methods out to another file and then delete them for testing purposes in Vim when using it via putty/ssh where you cannot use the mouse?
I can easily yank-to-the-end-of-line or yank-to-the-end-of-code-block but if the text extends over many screens, or has lots of blank lines in it, I feel like my hands are tied in Vim. Any solutions?
And a related question: is there a way to somehow select 40 lines, and then comment them all out (with "#" or "//"), as is common in most IDEs?
Well, first of all, you can set vim to work with the mouse, which would allow you to select text just like you would in Eclipse.
You can also use the Visual selection - v, by default. Once selected, you can yank, cut, etc.
As far as commenting out the block, I usually select it with VISUAL, then do
:'<,'>s/^/# /
Replacing the beginning of each line with a #. (The '< and '> markers are the beginning and and of the visual selection.
Use markers.
Go to the top of the text block you want to delete and enter
ma
anywhere on that line. No need for the colon.
Then go to the end of the block and enter the following:
:'a,.d
Entering ma has set marker a for the character under the cursor.
The command you have entered after moving to the bottom of the text block says "from the line containing the character described by marker a ('a) to the current line (.) delete."
This sort of thing can be used for other things as well.
:'a,.ya b - yank from 'a to current line and put in buffer 'b'
:'a,.ya B - yank from 'a to current line and append to buffer 'b'
:'a,.s/^/#/ - from 'a to current line, substitute '#' for line begin
(i.e. comment out in Perl)
:'s,.s#^#//# - from 'a to current line, substitute '//' for line begin
(i.e. comment out in C++)
N.B. 'a (apostrophe-a) refers to the line containing the character marked by a. ``a(backtick-a) refers to the character marked bya`.
To insert comments select the beginning characters of the lines using CTRL-v (blockwise-visual, not 'v' character wise-visual or 'V' linewise-visual). Then go to insert-mode using 'I', enter your comment-character(s) on the first line (for example '#') and finally escape to normal mode using 'Esc'. Voila!
To remove the comments use blockwise-visual to select the comments and just delete them using 'x'.
Use the visual block command v (or V for whole lines and C-V for rectangular blocks). While in visual block mode, you can use any motion commands including search; I use } frequently to skip to the next blank line. Once the block is marked, you can :w it to a file, delete, yank, or whatever. If you execute a command and the visual block goes away, re-select the same block with gv. See :help visual-change for more.
I think there are language-specific scripts that come with vim that do things like comment out blocks of code in a way that fits your language of choice.
Press V (uppercase V) and then press 40j to select 40 lines and then press d to delete them. Or as #zigdon replied, you can comment them out.
The visual mode is the solution for your main problem. As to commenting out sections of code, there are many plugins for that on vim.org, I am using tComment.vim at the moment.
There is also a neat way to comment out a block without a plugin. Lets say you work in python and # is the comment character. Make a visual block selection of the column you want the hash sign to be in, and type I#ESCAPE. To enter a visual block mode press C-q on windows or C-v on linux.
My block comment technique:
Ctrl+V to start blockwise visual mode.
Make your selection.
With the selection still active, Shift+I. This put you into column insert mode.
Type you comment characters '#' or '//' or whatever.
ESC.
Or you may want to give this script a try...
http://www.vim.org/scripts/script.php?script_id=23
For commenting out lines, I would suggest one of these plugins:
EnhancedCommentify
NERD Commenter
I find myself using NERD more these days, but I've used EnhancedCommentify for years.
If you want to perform an action on a range of lines, and you know the line numbers, you can put the range on the command line. For instance, to delete lines 20 through 200 you can do:
:20,200d
To move lines 20 through 200 to where line 300 is you can use:
:20,200m300
And so on.
Use Shift+V to go in visual mode, then you can select lines and delete / change them.
My usual method for commenting out 40 lines would be to put the cursor on the first line and enter the command:
:.,+40s/^/# /
(For here thru 40 lines forward, substitute start-of-line with hash, space)
Seems a bit longer than some other methods suggested, but I like to do things with the keyboard instead of the mouse.
First answer is currently not quite right?
To comment out selection press ':' and type command
:'<,'>s/^/# /g
('<, '> - will be there automatically)
You should be aware of the normal mode command [count]CTRL-D.
It optionally changes the 'scroll' option from 10 to [count], and then scrolls down that many lines. Pressing CTRL-D again will scroll down that same lines again.
So try entering
V "visual line selection mode
30 "optionally set scroll value to 30
CTRL-D "jump down a screen, repeated as necessary
y " yank your selection
CTRL-U works the same way but scrolls up.
v enters visual block mode, where you can select as if with shift in most common editors, later you can do anything you can normally do with normal commands (substitution :'<,'>s/^/#/ to prepend with a comment, for instance) where '<,'> means the selected visual block instead of all the text.
marks would be the simplest mb where u want to begin and me where u want to end once this is done you can do pretty much anything you want
:'b,'ed
deletes from marker b to marker e
commenting out 40 lines you can do in the visual mode
V40j:s/^/#/
will comment out 40 lines from where u start the sequence