I created in SharePoint a list. It has several columns, one of these columns is called assined to. It contains one or more person.
What i want, is that an email is send to the new person/s, if a new person is added to this column.
Now i searched a little bit, and found out that I should use Workflows to solve this problem. But the problem is the Workflow is started only automaticly if any changes are made in an element or when an element is created.
So my question is, is theire a possibility to trigger an email by content changes in a specified column.
By the way im working with a list in SharePoint 2013.
One way to accomplish this is to use an additional column on the list to track the previous assignment. Whenever an item is modified, the workflow can run and check the Assigned To field against the new Previous Assignment field. If they are different, the workflow can send the email and then update the Previous Assignment field to be equal to the current Assigned To value.
You can make the Previous Assignment field hidden from forms in the content type settings so that it won't be visible (and confusing) to users.
Yes, this would work. You would need to create a condition which checks on every change which is made to the item if the field "assigned to" is filled.
Here is nearly the same requirement at the MSDN Forums:
https://social.msdn.microsoft.com/Forums/office/en-US/112c2be9-5d3e-47d1-ad1c-06312de8a925/workflow-condition-assigned-to-is-not-empty?forum=sharepointcustomization
Related
I created in SharePoint a list. with column Assigned To. What I want is that an email is sent to the Assignee, if the Assignee is added to this column. But the problem is that Workflow is started only automatically if any changes are made in an element or when an element is created.
So my question is, is there a possibility to trigger an email by content changes in a specified column without sending 2 emails.
I think, If you are using SharePoint 2010 or 2013 workflow then you can set workflow to triger only for create and edit of item of list. But If you use Microsoft flow, you can trigger flow base on column change. But if you want to implement into 2010 and 2013 workflow then below step will work.
1) create one extra field and make it read only and hidden for every one.
2) trigger the workflow when item change into list.
3) if Assigned field is not null and not equal to extra field then send email and make extra field value same as Assigned field value.
I have a simple calculated column in my SharePoint 2010 list. It takes the list item ID, adds 100 to it.
When my users are creating items in the list, the calculated column does not get updated unless I go in, edit the column (do nothing) and save it. It, in fact, gives all items a value of 101 unless I manually edit the column.
Is this typical or is there a work around for this issue?
Thank you!
It is not possible to create calculated column based on ID value. The Id of the item is created after the item is added to the list.
You should use workflow instead.
The problem with using a workflow to do this (as per the accepted answer) is that workflow can take an appreciable time to execute. So you cannot create the ID until AFTER the new item is saved and there is always the danger that simultaneous users can create ID clashes that you also have to handle. If the workflow (as on a busy system) takes several minutes to work, you can also get the problem of someone else editing the item before the workflow has finished which may cause the workflow to fail leaving the item without any ID.
As an alternative, you might consider using JavaScript in the NewItem.aspx page to lookup and increment a counter from a separate list. Note that you have to update the counter as you read it if you are doing this so as to ensure that other users don't accidentally get the same ID if creating entries at the same time. This means that you must not mind the counter incrementing even if a user subsequently cancels the new item without saving.
As you noticed in opening/saving an item, The Calculated Column is updated on every item change.
Does it work to have a Workflow read the Title and write (the same) Title?
The [ID] reference in the Calculated Column should be set.
No need for an extra LookupID column then.
We've created a pretty standard issue tracking system based off of SharePoint's template with just a few extra columns. On the list view (AllItems.aspx), the first column is called "Issue ID" and has a number. Our developers and QC use that number in discussions. However, that number doesn't seem to want to show up on the detail form (DispForm.aspx) nor in the alert email.
Can this field be included in at least one of these communication methods? If so, how?
Thank you.
We did something similar and used workflow via SharePoint Designer to copy the ID field into a field called "Issue Number". The workflow gets triggered automatically on Create / Edit (we included edit because the field can be modified by the user on the edit form and if that happens we want the number refreshed with the actual ID).
Before you create the workflow in SharePoint Designer, you need to add a column called "Issue Number" to the list you want to tweak.
List item
Open Sharepoint Designer
List item
Click File New -> Workflow
Give a name for the workflow
a. select the list from the dropdown
b. Uncheck Allow this workflow to be manually started and check automatically start on new and change then press Next
Give the step a name like "Assign Issue Number"
Create a Condition
If Compare a field -> If Issue Number not equals Current_Item:ID
Create an Action
Update List Item -> Set Issue Number to Current_Item:ID
Press Finished and test out by creating a new issue.
*The Issue Number will appear on the form and if you have emails setup to notify on assignment it will appear in the reassigned template.
*It will not appear in the created email confirmation because the workflow gets triggered after that email was executed.
I just added the issue ID using a total of 4 characters. Create a new column, set it to a Calculated column, in the formula type [ID]. Voila! The ID is now in your detail view.
The ID link returned the for me, however, the work around which sufficed for me was to enter 'Created' in the Calculated Column formula and ensure it is set at date and time. That then creates a unique idenity (unless you receive more than 1 list update per minute) than can be viewed in the email alert message
Good Morning,
I have a Form Library on my SharePoint site. On my form I have a calculated string field that does basic math (field1 x 3). I'm looking to have some way for the form to recognize that the field was changed (when saved) and somehow set off a SharePoint alert.
I'm completely baffled as how to go about this, if anyone could help that would be awesome! Thanks!
Shannon
Couple ways of doing this.
If you don't have programming access.
Create a new column, hidden if you want. In SPD create a workflow to run when a change is made. In that workflow compare the current value to the the that new column and if different then sent out email and copy the current value to this new column.
Or do the same thing in Infopath, if you have programming access, where when the form is opened you store the current value and when they save the form compare values and send out email as needed or set another column to sent out email and have a workflow do the mailing out.
If you have programming access to Sharepoint you could write your own handler to duplicate it, little more control.
In a SharePoint list I want an auto number column that as I add to the list gets incremented. How best can I go about this?
Sharepoint Lists automatically have an column with "ID" which auto increments. You simply need to select this column from the "modify view" screen to view it.
You can't add a new unique auto-generated ID to a SharePoint list, but there already is one there! If you edit the "All Items" view you will see a list of columns that do not have the display option checked.
There are quite a few of these columns that exist but that are never displayed, like "Created By" and "Created". These fields are used within SharePoint, but they are not displayed by default so as not to clutter up the display. You can't edit these fields, but you can display them to the user. if you check the "Display" box beside the ID field you will get a unique and auto-generated ID field displayed in your list.
Check out: Unique ID in SharePoint list
If you want to control the formatting of the unique identifier you can create your own <FieldType> in SharePoint. MSDN also has a visual How-To. This basically means that you're creating a custom column.
WSS defines the Counter field type (which is what the ID column above is using). I've never had the need to re-use this or extend it, but it should be possible.
A solution might exist without creating a custom <FieldType>. For example: if you wanted unique IDs like CUST1, CUST2, ... it might be possible to create a Calculated column and use the value of the ID column in you formula (="CUST" & [ID]). I haven't tried this, but this should work :)
I had this issue with a custom list and while it's not possible to use the auto-generated ID column to create a calculated column, it is possible to use a workflow to do the heavy lifting.
I created a new workflow variable of type Number and set it to be the value of the ID column in the current item. Then it's simply a matter of calculating the custom column value and setting it - in my case I just needed the numbering to begin at 100,000.
it's in there by default. It's the id field.
If you want something beyond the ID column that's there in all lists, you're probably going to have to resort to an Event Receiver on the list that "calculates" what the value of your unique identified should be or using a custom field type that has the required logic embedded in this. Unfortunately, both of these options will require writing and deploying custom code to the server and deploying assemblies to the GAC, which can be frowned upon in environments where you don't have complete control over the servers.
If you don't need the unique identifier to show up immediately, you could probably generate it via a workflow (either with SharePoint Designer or a custom WF workflow built in Visual Studio).
Unfortunately, calculated columns, which seem like an obvious solution, won't work for this purpose because the ID is not yet assigned when the calculation is attempted. If you go in after the fact and edit the item, the calculation may achieve what you want, but on initial creation of a new item it will not be calculated correctly.
As stated, all objects in sharepoint contain some sort of unique identifier (often an integer based counter for list items, and GUIDs for lists).
That said, there is also a feature available at http://www.codeplex.com/features called "Unique Column Policy", designed to add an other column with a unique value. A complete writeup is available at http://scothillier.spaces.live.com/blog/cns!8F5DEA8AEA9E6FBB!293.entry
So I am not sure I can really think of why you would actually need a "site collection unique" id, so maybe you can comment and let us know what is actually trying to be accomplished here...
Either way, all items have a UniqueID property that is a GUID if you really need it: http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splistitem.uniqueid.aspx
Peetha has the best idea, I've done the same with a custom list in our SP site. Using a workflow to auto increment is the best way, and it is not that difficult. Check this website out: http://splittingshares.wordpress.com/2008/04/11/auto-increment-a-number-in-a-new-list-item/
I give much appreciation to the person who posted that solution, it is very cool!!