Logstash custom log parsing - logstash

Need your help in custom log parsing through logstash
Here is the log format that I am trying to parse through logstash
2015-11-01 07:55:18,952 [abc.xyz.com] - /Enter, G, _null, 2702, 2, 2, 2, 2, PageTotal_1449647718950_1449647718952_2_App_e9c00521-eeec-4d47-bf5b-b842ec14a4ff_178.255.153.2___, , , NEW,
And my logstash conf file looks like below
input {
file {
path => [ "/tmp/access.log" ]
}
}
filter{
grok {
match => { "message" => "%{TIMESTAMP_ISO8601:timestamp} %{GREEDYDATA:message}" }
}
date {
match => ["timestamp","yyyy-MM-dd HH:mm:ss,SSSS"]
}
}
For some reason running the logstash command passing the conf file doesnt parse the logs, not sure whats wrong with the config. Any help would be highly appreciated.
bin/logstash -f conf/access_log.conf
Settings: Default filter workers: 6
Logstash startup completed

I have checked your Grok Match filter and is fine with:
Grok Debugger
You don't have to use the date matcher because the grok matcher already correctly match the TIMESTAMP_ISO8601 timestamp.
I think your problem is with "since_db" file.
Here is the documentation:
since_db
In few words, logstash remember if a file is already read and doesn't read it anymore. Logstash remember if one file was already read because write it in the since Database.
If you would like to test your filter reading always the same file, you could try:
input {
file {
path => [ "/tmp/access.log" ]
sincedb_path => "/dev/null"
}
}
Regards

Related

Logstash 7.10.02 failed to start on windows

I tried starting the logstash with the below command
logstash-7.10.2\logstash -f logstash.conf
logstash.conf
input{
file{
path => "D://server.log" start_position=> "beginning" type => "logs"
}
}
filter {
grok {
match => {"message" => "%{TIMESTAMP_ISO8601:logtime} \[%{NOTSPACE:thread}\] \[%{LOGLEVEL:loglevel}\] %{GREEDYDATA:line}"
}
}
}
output {
if "ERROR" in [loglevel]
{
elasticsearch {
hosts => ["localhost:9200"]
index => "logstash"
}
}
}
command prompt displayed the below text and did not start logstash.
Using JAVA_HOME defined java: C:\Program Files\Java\jdk1.8.0_221;
WARNING, using JAVA_HOME while Logstash distribution comes with a bundled JDK
warning: ignoring JAVA_OPTS=-Xms64m -Xmx128m -XX:NewSize=64m -XX:MaxNewSize=64m -XX:PermSize=64m -XX:MaxPermSize=64m; pass JVM parameters via LS_JAVA_OPTS
No error logs were created.
Have you tried staring logstash in debug mode .
--log.level DEBUG
Pipeline looks okay. Can you try adding below output to see if you the pattern and log data matches. Just to rule out any grokparsefailures.
output {
stdout { codec => rubydebug }
if "ERROR" in [loglevel]
{
elasticsearch {
hosts => ["localhost:9200"]
index => "logstash"
}
}
}

logstash custom patterns don´t get resolved

I´m trying to setup an environment for grok debugging and made this with a docker.
Everything works fine, until logstash tries to resolve a custom pattern.
Here is my environment
I start the docker with
docker run -it --name logstash_debug -v
/home/cloud/docker-elk/logstash/config/logstash.yml:/usr/share/logstash/config/logstash.yml
-v /home/cloud/docker-elk/logstash/pipeline/:/usr/share/logstash/pipeline/
-v /home/cloud/docker-elk/logstash/patterns/:/usr/share/logstash/patterns
docker.elastic.co/logstash/logstash:7.2.0
As I said, logstash starts up, loads the pipeline (debug.conf)
input { stdin {} }
filter {
grok {
patterns_dir => ["/usr/share/logstash/patterns"]
match => ["message", "%{YEAR1} \[%{LOGLEVEL:loglvl}\] %{GREEDYDATA:message}"]
}
date {
match => ["customer_time", "${YEAR1}"]
target => "#timestamp"
}
}
output { stdout { codec => rubydebug } }
and gives me this error:
Cannot evaluate ${YEAR1}. Replacement variable YEAR1 is not
defined in a Logstash secret store or as an Environment entry and
there is no default value given.
the patterns_dir contains a file "dateformats" which contains (stripped it down to a minimum)
YEAR1 %{YEAR}
the logstash debug output gives me this:
[DEBUG][logstash.filters.grok ] config
LogStash::Filters::Grok/#patterns_dir =
["/usr/share/logstash/patterns"]
[DEBUG][logstash.filters.grok ] config
LogStash::Filters::Grok/#match = {"message"=>"%{YEAR1}
\[%{LOGLEVEL:loglvl}\] %{GREEDYDATA:message}"}
.....
[DEBUG][logstash.filters.grok ] config
LogStash::Filters::Grok/#patterns_files_glob = "*"
Normally logstash should be able to grab this file (I even started the docker with --user 0 to be sure that I have no permission problem) but it somehow can´t.
Anyone can me give a hint to what´s going on ?
Thanks and cheers,
Wurzelseppi

Logstash: Nothing displayed on console (Mac)

I am trying to set up a very simple logstash config
input {
file {
path => "/path/to/my/log/file"
start_position => "beginning"
ignore_older => 0
}
}
filter {
}
output {
stdout {
codec => rubydebug
}
}
and here is how i start logstash
[logstash-7.1.1]$ bin/logstash -r -f log.conf
but here is all i see on the console
Sending Logstash logs to path/to/logstash-7.1.1/logs which is now configured via log4j2.properties
[2019-05-28T13:22:57,294][WARN ][logstash.config.source.multilocal] Ignoring the 'pipelines.yml' file because modules or command line options are specified
[2019-05-28T13:22:57,313][INFO ][logstash.runner ] Starting Logstash {"logstash.version"=>"7.1.1"}
[2019-05-28T13:23:02,904][INFO ][logstash.javapipeline ] Starting pipeline {:pipeline_id=>"main", "pipeline.workers"=>8, "pipeline.batch.size"=>125, "pipeline.batch.delay"=>50, "pipeline.max_inflight"=>1000, :thread=>"#<Thread:0x7ad3cf30 run>"}
[2019-05-28T13:23:03,254][INFO ][logstash.inputs.file ] No sincedb_path set, generating one based on the "path" setting {:sincedb_path=>"path/to/logstash-7.1.1/data/plugins/inputs/file/.sincedb_8164b23a475b43f1b0c9aba125f7f5cf", :path=>["/path/to/my/log/file"]}
[2019-05-28T13:23:03,284][INFO ][logstash.javapipeline ] Pipeline started {"pipeline.id"=>"main"}
[2019-05-28T13:23:03,355][INFO ][filewatch.observingtail ] START, creating Discoverer, Watch with file and sincedb collections
[2019-05-28T13:23:03,360][INFO ][logstash.agent ] Pipelines running {:count=>1, :running_pipelines=>[:main], :non_running_pipelines=>[]}
[2019-05-28T13:23:03,703][INFO ][logstash.agent ] Successfully started Logstash API endpoint {:port=>9600}
i can see that
No sincedb_path set, generating one based on the "path" setting {:sincedb_path=>"path/to/logstash-7.1.1/data/plugins/inputs/file/.sincedb_8164b23a475b43f1b0c9aba125f7f5cf", :path=>["/path/to/my/log/file"]}
so the path seems correct. Also, my log file is not empty.
What am i doing wrong? Why cant I see the content of my log file on the console?
input {
file {
path => "/salaries.csv"
start_position => "beginning"
type => "data"
}
}
filter {
csv{
separator => ","
}
}
output {
stdout {
codec => rubydebug
}
}
This link may helpful to you

Logstash doesnt read from configured input file

I am trying to configure my Logstash to read from a specified log file. When I configure it to read from stdin it works as expected, my input results in a message from Logstash and displays in my Kibana UI.
$ cat /tmp/logstash-stdin.conf
input {
stdin {}
}
output {
elasticsearch { hosts => ["localhost:9200"] }
stdout { codec => rubydebug }
}
$./logstash -f /tmp/logstash-stdin.conf
WARNING: Could not find logstash.yml which is typically located in $LS_HOME/config or /etc/logstash. You can specify the path using --path.settings. Continuing using the defaults
Could not find log4j2 configuration at path //usr/share/logstash/config/log4j2.properties. Using default config which logs errors to the console
The stdin plugin is now waiting for input:
hellloooo
{
"#version" => "1",
"host" => "myhost.com",
"#timestamp" => 2017-11-17T16:05:41.595Z,
"message" => "hellloooo"
}
However, when I run Logstash with a file input I get no indication that the file is loaded into Logstash, and it does not show in Kibana.
$ cat /tmp/logstash-simple.conf
input {
file {
path => "/tmp/test_log.txt"
type => "syslog"
}
}
output {
elasticsearch { hosts => ["localhost:9200"] }
stdout { codec => rubydebug }
}
$ ./logstash -f /tmp/logstash-simple.conf
WARNING: Could not find logstash.yml which is typically located in $LS_HOME/config or /etc/logstash. You can specify the path using --path.settings. Continuing using the defaults
Could not find log4j2 configuration at path //usr/share/logstash/config/log4j2.properties. Using default config which logs errors to the console
Any suggestions of how I can troubleshoot why my Logstash is not ingesting the configured file?
By default the file input plugin starts reading at the end of the file, so only lines added after Logstash starts will be processed. To read all existing lines upon startup add the option "start_position" => "beginning" to the configuration, as explained in documentation.

Get JSON from file

Logstash 5.2.1
I can't read JSON documents from a local file using Logstash. There are no documents in the stdout.
I run Logstash like this:
./logstash-5.2.1/bin/logstash -f logstash-5.2.1/config/shakespeare.conf --config.reload.automatic
Logstash config:
input {
file {
path => "/home/trex/Development/Shipping_Data_To_ES/shakespeare.json"
codec => json {}
start_position => "beginning"
}
}
output {
stdout {
codec => rubydebug
}
}
Also, I tried with charset:
...
codec => json {
charset => "UTF-8"
}
...
Also, I tried with/without json codec in the input and with filter:
...
filter {
json {
source => "message"
}
}
...
Logstash console after start:
[2017-02-28T11:37:29,947][WARN ][logstash.agent ] fetched new config for pipeline. upgrading.. {:pipeline=>"main", :config=>"input {\n file {\n path => \"/home/trex/Development/Shipping_Data_To_ES/shakespeare.json\"\n codec => json {\n charset => \"UTF-8\"\n }\n start_position => \"beginning\"\n }\n}\n#filter {\n# json {\n# source => \"message\"\n# }\n#}\noutput {\n stdout {\n codec => rubydebug\n }\n}\n\n"}
[2017-02-28T11:37:29,951][WARN ][logstash.agent ] stopping pipeline {:id=>"main"}
[2017-02-28T11:37:30,434][INFO ][logstash.pipeline ] Starting pipeline {"id"=>"main", "pipeline.workers"=>4, "pipeline.batch.size"=>125, "pipeline.batch.delay"=>5, "pipeline.max_inflight"=>500}
[2017-02-28T11:37:30,446][INFO ][logstash.pipeline ] Pipeline main started
^C[2017-02-28T11:40:55,039][WARN ][logstash.runner ] SIGINT received. Shutting down the agent.
[2017-02-28T11:40:55,049][WARN ][logstash.agent ] stopping pipeline {:id=>"main"}
^C[2017-02-28T11:40:55,475][FATAL][logstash.runner ] SIGINT received. Terminating immediately..
The signal INT is in use by the JVM and will not work correctly on this platform
[trex#Latitude-E5510 Shipping_Data_To_ES]$ ./logstash-5.2.1/bin/logstash -f logstash-5.2.1/config/shakespeare.conf --config.test_and_exit
^C[trex#Latitude-E5510 Shipping_Data_To_ES]$ ./logstash-5.2.1/bin/logstash -f logstash-5.2.1/config/shakespeare.conf --confireload.automatic
^C[trex#Latitude-E5510 Shipping_Data_To_ES]$ ./logstash-5.2.1/bin/logstash -f logstash-5.2.1/config/shakespeare.conf --config.reload.aumatic
Sending Logstash's logs to /home/trex/Development/Shipping_Data_To_ES/logstash-5.2.1/logs which is now configured via log4j2.properties
[2017-02-28T11:45:48,752][INFO ][logstash.pipeline ] Starting pipeline {"id"=>"main", "pipeline.workers"=>4, "pipeline.batch.size"=>125, "pipeline.batch.delay"=>5, "pipeline.max_inflight"=>500}
[2017-02-28T11:45:48,785][INFO ][logstash.pipeline ] Pipeline main started
[2017-02-28T11:45:48,875][INFO ][logstash.agent ] Successfully started Logstash API endpoint {:port=>9600}
Why Logstash doesn't put my JSON documents in stdout?
Did you try including the file type within your file input:
input {
file {
path => "/home/trex/Development/Shipping_Data_To_ES/shakespeare.json"
type => "json" <-- add this
//codec => json {} <-- for the moment i'll comment this
start_position => "beginning"
}
}
And then have your filter as such:
filter{
json{
source => "message"
}
}
OR if you're going with the codec plugin make sure to have the synopsis as such within your input:
codec => "json"
OR you might want to try out json_lines plugin as well. Hope this thread comes in handy.
It appears that sincedb_path is important to read JSON files. I was able to import the JSON only after adding this option. It is needed to maintain the current position in the file to be able to resume from that position in case the import is interrupted. I don't need any position tracking, so I just set this to /dev/null and it works.
The basic working Logstash configuration:
input {
file {
path => ["/home/trex/Development/Shipping_Data_To_ES/shakespeare.json"]
start_position => "beginning"
sincedb_path => "/dev/null"
}
}
output {
stdout {
codec => json_lines
}
elasticsearch {
hosts => ["localhost:9200"]
index => "shakespeare"
}
}

Resources