In the Pie chart, whenever a slice is clicked it has to be moved slightly as in the image.
This is the image
How this can be done? What I am doing is,create a virtual arg with radius 10 higher that the original one. Then to find out the distance between these.
After the distance is calculated use the X,Y value to the translate(X,Y) attribute to move the arc slice to specified point
Here is an example :
<?xml version="1.0" ?>
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 400 400" width="400" height="400" version="1.0">
<g transform="translate(200 200)">
<circle cx="0" cy="0" r="150" stroke="#000" fill="none" />
<path d="M0,-150 Q0,0 106.066,-106.066" fill="none" stroke="red" stroke-width="3" />
<path d="M0,-150 Q0,0 106.066,106.066" fill="none" stroke="red" stroke-width="3" />
<path d="M0,-150 Q0,0 -106.066,106.066" fill="none" stroke="red" stroke-width="3" />
<path d="M0,-150 Q0,0 -106.066,-106.066" fill="none" stroke="red" stroke-width="3" />
</g>
</svg>
Related
This:
<svg width=100 height=100>
<g transform="translate(0.5, 0.5)" stroke=red fill=none>
<line x1=10 y1=10 x2=10 y2=50 />
<path d="M20,10 H20 V50 H20 Z" />
<path d="M30,10 H31 V50 H30 Z" />
<path d="M40,10 H42 V50 H40 Z" />
<path d="M50,10 H52 V50 H50 Z" />
</g>
</svg>
produces image like this in Chrome (zoomed in so it's obvious):
Top part
Bottom part
Note that the edges of the lines and the corners of the rectangles are of a slightly lighter red.
This looks like it's anti-aliasing, but trying shape-rendering="crispEdges" suggestion in this answer did not fully work. The problem is that it then cuts the line by 1px instead:
<svg width=100 height=100>
<g shape-rendering="crispEdges" stroke=red fill=none>
<line x1=10 y1=10 x2=10 y2=50 />
<path d="M20,10 H20 V50 H20 Z" />
<path d="M30,10 H31 V50 H30 Z" />
<path d="M40,10 H42 V50 H40 Z" />
<path d="M50,10 H52 V50 H50 Z" />
</g>
</svg>
Top part
Bottom part
Is there a way to fix this somehow, so I get the same line color across the specified coordinate range?
On Win64 Chrome, I'm only seeing the antialiasing on the first two elements.
The explanation for the line element is simple. Because you are translating down by half a pixel, the two line ends are ending halfway up/down a pixel. Hence you will get antialiasing in that case. Adjust the coords, or add stroke-linecap="square" to fix that.
Illustration:
<svg viewBox="0 0 70 40" width="420">
<g transform="translate(10,10)">
<g fill="none" stroke="#ccc" id="grid">
<rect width="10" height="10"/>
<rect x="10" width="10" height="10"/>
<rect y="10" width="10" height="10"/>
<rect x="10" y="10" width="10" height="10"/>
</g>
<!-- line (as is) -->
<line x1="5" y1="20" x2="5" y2="5" stroke="#00c8" stroke-width="10"/>
<line x1="5" y1="20" x2="5" y2="5" stroke="red" stroke-width="1"/>
</g>
<g transform="translate(40,10)">
<use xlink:href="#grid"/>
<!-- rectamngle corner -->
<path d="M 5,20 L 5,5 L 20,5" fill="none" stroke="#00c8" stroke-width="10"/>
<path d="M 5,20 L 5,5 L 20,5" fill="none" stroke="red" stroke-width="1"/>
</g>
</svg>
As for the zero width rectangle. Not sure what's happening there. It is only slightly lighter. It is likely a rendering bug in Skia. It may only effect the GPU renderer of Skia (I didn't check). The GPU renderer has a few more rendering bugs on these sort of edge cases than the CPU rendering path. If you care, you could file a bug about it.
<svg width=100 height=100>
<g transform="translate(0.5, 0.5)" stroke=red fill=none>
<line x1=10 y1=10 x2=10 y2=50 stroke-linecap="square"/>
<path d="M20,10 H20 V50 H20 Z" />
</g>
</svg>
I want to color an intersection of two object, let's say a circle and a rectangle.
What I have tried so far is to defined a path bounding that region then add the fill attribute, but it seems too complicated.
Is there any other ways to do so?
Let me elabotare more one the problem:
<svg width="352" height="57" xmlns="http://www.w3.org/2000/svg">
<line y2="0.75" x2="103.95" y1="43.15" x1="42.35" stroke-width="1.5" stroke="#000" fill="none"/>
<line y2="50.35" x2="201.55" y1="0.75" x1="103.95" stroke-width="1.5" stroke="#000" fill="none"/>
<line y2="19.15" x2="239.95" y1="49.55" x1="201.55" fill-opacity="null" stroke-opacity="null" stroke-width="1.5" stroke="#000" fill="none"/>
<line y2="55.95" x2="282.35" y1="18.35" x1="240.75" fill-opacity="null" stroke-opacity="null" stroke-width="1.5" stroke="#000" fill="none"/>
<line y2="37.55" x2="351.15" y1="31.95" x1="0.75" fill-opacity="null" stroke-opacity="null" stroke-width="1.5" stroke="#000" fill="none"/>
</svg>
I have a set of lines which the end of one is another end of the other.
I have another line intersecing these line.
How could I color the region i.e the triangles formed by these line?
You can use <clipPath> to clip the rect with the circle like so:
svg{width:100vh;}
<svg viewBox="50 50 200 100">
<clipPath id="clip">
<use xlink:href="#c" />
</clipPath>
<g fill="none" stroke="black" >
<circle id="c" cx="100" cy="100" r="30" />
<rect id="r" x="90" y="80" width="80" height="60" />
</g>
<use xlink:href="#r" clip-path="url(#clip)" fill="gold" />
</svg>
You could work with opacity to let the color of an overlapped element shine through like shown here:
<svg xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg">
<g style="stroke:#000; stroke-width:1">
<circle cx="50" cy="50" r="50" opacity="0.5" style="fill:red" />
<circle cx="100" cy="50" r="50" opacity="0.5" style="fill:yellow" />
<rect x="0" y="70" width="150" height="50" fill-opacity="0.5" style="fill:blue" />
</g>
</svg>
You can also specify the opacity levels separately for stroke and fill by using stroke-opacity and fill-opacity.
Edit:
Looking at your edited question again: when you are dealing with a succession of lines (and curves) you should use <path> elements instead of individual <line> elements. One of its advantages is that it comes with a fill behaviour that is almost exactly as you want it to be. However, to suit the requirements of your example you would need to find the positions where the straight line enters and leaves the zig-zag shape. These positions then define the points used for your filled path. The "original" (non-filled) path is then plotted over the filled path:
<svg width="352" height="57" xmlns="http://www.w3.org/2000/svg">
<path d="M56,33 103.95,0.75 201.55,50.35 239.95,19.15 260,36z
M0.75,31.95 351.15,37.55" style="fill:yellow" />
<path d="M42.35,43.15 103.95,0.75 201.55,50.35 239.95,19.15 282.35,55.95
M0.75,31.95 351.15,37.55" style="stroke:black;fill:none"/>
</svg>
I have this dummy svg showing a cirle with some grey figure inside
<svg viewBox="0 0 86 86" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<defs>
<circle id="path-1" cx="43" cy="43" r="43"></circle>
</defs>
<g stroke="none" stroke-width="1" fill="none" fill-rule="evenodd">
<g transform="translate(-585.000000, -391.000000)">
<g transform="translate(585.000000, 391.000000)">
<mask id="mask-2" fill="white">
<use xlink:href="#path-1"></use>
</mask>
<use id="Oval" fill="currentcolor" xlink:href="#path-1"></use>
<g id="Group" mask="url(#mask-2)" fill="#b8b8b8">
<g transform="translate(21.500000, 27.823529)" id="Page-1">
<path d="M0.5,0.176470588 L0.5,58.1764706 L15.5,58.1764706 L15.5,49.1764706 L29.5,49.1764706 L29.5,31.1764706 L7.5,31.1764706 L7.5,37.1764706 Z"></path>
</g>
</g>
</g>
</g>
</g>
when I convert it to a sprite using gulp-svg-sprite with mode symbol I get this result
<?xml version="1.0" encoding="UTF-8" ?><svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"><symbol viewBox="0 0 86 86" id="company"><defs><circle id="aa" cx="43" cy="43" r="43"/></defs><g fill="none" fill-rule="evenodd"><mask id="ab" fill="#fff"><use xlink:href="#aa"/></mask><use fill="currentcolor" xlink:href="#aa"/><g mask="url(#ab)" fill="#b8b8b8"><path d="M22 28v58h15v-9h14V59H29v6z"/></g></g></symbol></svg>
Now the grey figure breaks out of the circle and this even happens if I copy root defs- and g-tags from my original svg directly into the symbol-tag. I have also tried inserting a clipPath in the symbol version but with no luck.
What am I missing here?
UPDATED: Simplifying your svg may work ... try with the examples below, one using symbols, one without (in case the gulp sprite code cannot have nested symbols) ... it may be an issue with the defs area.
svg {
width: 100px;
}
<svg viewBox="0 0 86 86" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<defs>
<symbol id="c">
<circle cx="43" cy="43" r="43" fill="currentColor" />
</symbol>
<mask id="mask" color="#fff">
<use xlink:href="#c" />
</mask>
</defs>
<use xlink:href="#c" color="#666" />
<path fill="#999" mask="url(#mask)" d="M10 0v60h30v-10h20v-20h-30v9z" />
</svg>
<svg viewBox="0 0 86 86" xmlns="http://www.w3.org/2000/svg">
<defs>
<mask id="mask2" color="#fff">
<circle cx="43" cy="43" r="43" fill="#FFF" />
</mask>
</defs>
<circle cx="43" cy="43" r="43" fill="currentColor" />
<path fill="#999" mask="url(#mask2)" d="M10 0v60h30v-10h20v-20h-30v9z" />
</svg>
It is probably not a complete answer but I managed to get it work;
First I extended my defs with a clipPath using my circle
<defs>
<circle id="circle" cx="43" cy="43" r="43"></circle>
<clipPath id="clippath"><use overflow="visible" xlink:href="#circle" /></clipPath>
</defs>
Then, using the clipPath on my first group and switching from gulp-svg-sprite to gulp-svgstore (which moves the defs to the top, above the symbols) gives me what I expect both as single svg and as an svg symbol sprite.
I want to hide anything that outside a rectangle. (this i have achieved with clipping successfully). but another condition is that, 'also hide anything that comes inside the black big circle'. Now how i can achieve that?
in below example, 'yellow circle' must be eliminated'.
see below images for detail
Original:-
Desired:-
Below is my Svg code:-
<svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="500" height="500">
<g>
<rect x="50" y="50" width="200" height="200" stroke="1" fill="red"/>
<circle cx="180" cy="150" r="30" stroke="blue" />
</g>
<g clip-path = "url(#clip1)">
<circle cx="180" cy="150" r="10" stroke="blue" fill="yellow" />
</g>
<clipPath id = "clip1">
<rect x="50" y="50" width="200" height="200" stroke="1" fill="red"/>
</clipPath>
</svg>
Erik Dahlström is right, your clip can include the entire rectangle and the cutout for the circle. This way, anything you associate with #clip1 as the clip-path will not be visible inside your circle area. Here is what it looks like for your example:
<svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="500" height="500">
<g>
<rect x="50" y="50" width="200" height="200" stroke="1" fill="red"/>
<circle cx="180" cy="150" r="30" stroke="blue" />
</g>
<g clip-path = "url(#clip1)">
<circle cx="180" cy="150" r="10" stroke="blue" fill="yellow" />
</g>
<clipPath id = "clip1">
<path d="M 50,50 l200 0 l0 200 l-200 0z M150,150 a30,30 1 0,0 60,0z M210,150 a30,30 1 0,0 -60,0z"/>
</clipPath>
I mean after my SVG stops completing the animation I want the animation to start over again and end and then again start over and so on.
I tried:
<svg>
<animate repeatCount="indefinite"/>
</svg>
But it doesn't work.
See example animMotion01 in the w3 SVG spec for a fairly reduced example illustrating SVG animation (including use of repeatCount="indefinite"):
<svg width="5cm" height="3cm" viewBox="0 0 500 300"
xmlns="http://www.w3.org/2000/svg" version="1.1"
xmlns:xlink="http://www.w3.org/1999/xlink" >
<desc>Example animMotion01 - demonstrate motion animation computations</desc>
<rect x="1" y="1" width="498" height="298"
fill="none" stroke="blue" stroke-width="2" />
<!-- Draw the outline of the motion path in blue, along
with three small circles at the start, middle and end. -->
<path id="path1" d="M100,250 C 100,50 400,50 400,250"
fill="none" stroke="blue" stroke-width="7.06" />
<circle cx="100" cy="250" r="17.64" fill="blue" />
<circle cx="250" cy="100" r="17.64" fill="blue" />
<circle cx="400" cy="250" r="17.64" fill="blue" />
<!-- Here is a triangle which will be moved about the motion path.
It is defined with an upright orientation with the base of
the triangle centered horizontally just above the origin. -->
<path d="M-25,-12.5 L25,-12.5 L 0,-87.5 z"
fill="yellow" stroke="red" stroke-width="7.06" >
<!-- Define the motion path animation -->
<animateMotion dur="6s" repeatCount="indefinite" rotate="auto" >
<mpath xlink:href="#path1"/>
</animateMotion>
</path>
</svg>