Related
I am trying to compare and find different documents from two collections
below are the samples, Mongodb version:4.0, ORM:mongoose
**col1: Has one new document**
{ "id" : 200001, "mobileNo" : #######001 }
{ "id" : 200002, "mobileNo" : #######002 } //mobileNo may not be unique.
{ "id" : 200003, "mobileNo" : #######002 }
{ "id" : 200004, "mobileNo" : #######004 }
**col2:**
{ "id" : 200001, "mobileNo" : #######001 }
{ "id" : 200002, "mobileNo" : #######002 }
{ "id" : 200003, "mobileNo" : #######003 }
Now I want to insert the document { "id" : 200004, "mobileNo" : #######004 } from col1 to col2
i.e; the documents which doesn't match.
This is what I've tried so far :
const col1= await Col1.find({}, { mobileNo: 1,id: 1, _id: 0 })
col1.forEach(async function (col1docs) {
let col2doc = await Col2.find({ mobileNo: { $ne: col1docs.mobileNo},
id:{$ne:col1docs.id} }, { mobileNo: 1, _id: 0, id: 1 })
if (!(col2doc)) {
Col2.insertMany(col1docs);
}
});
I have also tried with $eq instead of $ne but neither i am getting the unmatched documents nor they are getting inserted. Any suggestions??? Combination of id+phoneNo is unique
I would say instead of doing two .find() calls plus iteration & then third call to write data, try this query :
db.col1.aggregate([
{
$lookup: {
from: "col2",
let: { id: "$id", mobileNo: "$mobileNo" },
pipeline: [
{
$match: { $expr: { $and: [ { $eq: [ "$id", "$$id" ] }, { $gte: [ "$mobileNo", "$$mobileNo" ] } ] } }
},
{ $project: { _id: 1 } } // limiting to `_id` as we don't need entire doc of `col2` - just need to see whether a ref exists or not
],
as: "data"
}
},
{ $match: { data: [] } // Filtering leaves docs in `col1` which has no match in `col2`
},
{ $project: { data: 0, _id: 0 } }
])
Test : mongoplayground
Details : From the above query you're taking advantage of specifying conditions in $lookup to get docs from col1 which have reference in col2. Let's say $lookup will run on each document of col1 - So with the unique combination of id & mobileNo from current document in col1 has a matching in col2 then col2 doc's _id will be pushed in data array, at the end what we get out of col1 is data: [] to say no matching docs were found for these col1 doc's. Now you can just write all the returned docs to col2 using .insertMany(). Actually you can do this entire thing using $merge on MongoDB version > 4.2 without any need of 2nd write call(.insertMany()).
For your scenario on MongoDB version > 4.2 something like this will merge docs to second collection :
{ $merge: 'col2' } // Has to be final stage in aggregation
Note : If this has to be done periodically - no matter how you do this, try to minimize data that you're operating on, maybe maintain a time field & you can use that field to filter docs first & do this job, or you can also take advantage of _id to say we've done for all these docs in last run & we need to start from this docs - which helps you a lot to reduce data to be worked on. Additionally don't forget to maintain indexes.
How do I perform the SQL Join equivalent in MongoDB?
For example say you have two collections (users and comments) and I want to pull all the comments with pid=444 along with the user info for each.
comments
{ uid:12345, pid:444, comment="blah" }
{ uid:12345, pid:888, comment="asdf" }
{ uid:99999, pid:444, comment="qwer" }
users
{ uid:12345, name:"john" }
{ uid:99999, name:"mia" }
Is there a way to pull all the comments with a certain field (eg. ...find({pid:444}) ) and the user information associated with each comment in one go?
At the moment, I am first getting the comments which match my criteria, then figuring out all the uid's in that result set, getting the user objects, and merging them with the comment's results. Seems like I am doing it wrong.
As of Mongo 3.2 the answers to this question are mostly no longer correct. The new $lookup operator added to the aggregation pipeline is essentially identical to a left outer join:
https://docs.mongodb.org/master/reference/operator/aggregation/lookup/#pipe._S_lookup
From the docs:
{
$lookup:
{
from: <collection to join>,
localField: <field from the input documents>,
foreignField: <field from the documents of the "from" collection>,
as: <output array field>
}
}
Of course Mongo is not a relational database, and the devs are being careful to recommend specific use cases for $lookup, but at least as of 3.2 doing join is now possible with MongoDB.
We can merge/join all data inside only one collection with a easy function in few lines using the mongodb client console, and now we could be able of perform the desired query.
Below a complete example,
.- Authors:
db.authors.insert([
{
_id: 'a1',
name: { first: 'orlando', last: 'becerra' },
age: 27
},
{
_id: 'a2',
name: { first: 'mayra', last: 'sanchez' },
age: 21
}
]);
.- Categories:
db.categories.insert([
{
_id: 'c1',
name: 'sci-fi'
},
{
_id: 'c2',
name: 'romance'
}
]);
.- Books
db.books.insert([
{
_id: 'b1',
name: 'Groovy Book',
category: 'c1',
authors: ['a1']
},
{
_id: 'b2',
name: 'Java Book',
category: 'c2',
authors: ['a1','a2']
},
]);
.- Book lending
db.lendings.insert([
{
_id: 'l1',
book: 'b1',
date: new Date('01/01/11'),
lendingBy: 'jose'
},
{
_id: 'l2',
book: 'b1',
date: new Date('02/02/12'),
lendingBy: 'maria'
}
]);
.- The magic:
db.books.find().forEach(
function (newBook) {
newBook.category = db.categories.findOne( { "_id": newBook.category } );
newBook.lendings = db.lendings.find( { "book": newBook._id } ).toArray();
newBook.authors = db.authors.find( { "_id": { $in: newBook.authors } } ).toArray();
db.booksReloaded.insert(newBook);
}
);
.- Get the new collection data:
db.booksReloaded.find().pretty()
.- Response :)
{
"_id" : "b1",
"name" : "Groovy Book",
"category" : {
"_id" : "c1",
"name" : "sci-fi"
},
"authors" : [
{
"_id" : "a1",
"name" : {
"first" : "orlando",
"last" : "becerra"
},
"age" : 27
}
],
"lendings" : [
{
"_id" : "l1",
"book" : "b1",
"date" : ISODate("2011-01-01T00:00:00Z"),
"lendingBy" : "jose"
},
{
"_id" : "l2",
"book" : "b1",
"date" : ISODate("2012-02-02T00:00:00Z"),
"lendingBy" : "maria"
}
]
}
{
"_id" : "b2",
"name" : "Java Book",
"category" : {
"_id" : "c2",
"name" : "romance"
},
"authors" : [
{
"_id" : "a1",
"name" : {
"first" : "orlando",
"last" : "becerra"
},
"age" : 27
},
{
"_id" : "a2",
"name" : {
"first" : "mayra",
"last" : "sanchez"
},
"age" : 21
}
],
"lendings" : [ ]
}
I hope this lines can help you.
This page on the official mongodb site addresses exactly this question:
https://mongodb-documentation.readthedocs.io/en/latest/ecosystem/tutorial/model-data-for-ruby-on-rails.html
When we display our list of stories, we'll need to show the name of the user who posted the story. If we were using a relational database, we could perform a join on users and stores, and get all our objects in a single query. But MongoDB does not support joins and so, at times, requires bit of denormalization. Here, this means caching the 'username' attribute.
Relational purists may be feeling uneasy already, as if we were violating some universal law. But let’s bear in mind that MongoDB collections are not equivalent to relational tables; each serves a unique design objective. A normalized table provides an atomic, isolated chunk of data. A document, however, more closely represents an object as a whole. In the case of a social news site, it can be argued that a username is intrinsic to the story being posted.
You have to do it the way you described. MongoDB is a non-relational database and doesn't support joins.
With right combination of $lookup, $project and $match, you can join mutiple tables on multiple parameters. This is because they can be chained multiple times.
Suppose we want to do following (reference)
SELECT S.* FROM LeftTable S
LEFT JOIN RightTable R ON S.ID = R.ID AND S.MID = R.MID
WHERE R.TIM > 0 AND S.MOB IS NOT NULL
Step 1: Link all tables
you can $lookup as many tables as you want.
$lookup - one for each table in query
$unwind - correctly denormalises data , else it'd be wrapped in arrays
Python code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "R"}
])
Step 2: Define all conditionals
$project : define all conditional statements here, plus all the variables you'd like to select.
Python Code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "R"},
# define conditionals + variables
{"$project": {
"midEq": {"$eq": ["$MID", "$R.MID"]},
"ID": 1, "MOB": 1, "MID": 1
}}
])
Step 3: Join all the conditionals
$match - join all conditions using OR or AND etc. There can be multiples of these.
$project: undefine all conditionals
Complete Python Code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "$R"},
# define conditionals + variables
{"$project": {
"midEq": {"$eq": ["$MID", "$R.MID"]},
"ID": 1, "MOB": 1, "MID": 1
}},
# join all conditionals
{"$match": {
"$and": [
{"R.TIM": {"$gt": 0}},
{"MOB": {"$exists": True}},
{"midEq": {"$eq": True}}
]}},
# undefine conditionals
{"$project": {
"midEq": 0
}}
])
Pretty much any combination of tables, conditionals and joins can be done in this manner.
You can join two collection in Mongo by using lookup which is offered in 3.2 version. In your case the query would be
db.comments.aggregate({
$lookup:{
from:"users",
localField:"uid",
foreignField:"uid",
as:"users_comments"
}
})
or you can also join with respect to users then there will be a little change as given below.
db.users.aggregate({
$lookup:{
from:"comments",
localField:"uid",
foreignField:"uid",
as:"users_comments"
}
})
It will work just same as left and right join in SQL.
As others have pointed out you are trying to create a relational database from none relational database which you really don't want to do but anyways, if you have a case that you have to do this here is a solution you can use. We first do a foreach find on collection A( or in your case users) and then we get each item as an object then we use object property (in your case uid) to lookup in our second collection (in your case comments) if we can find it then we have a match and we can print or do something with it.
Hope this helps you and good luck :)
db.users.find().forEach(
function (object) {
var commonInBoth=db.comments.findOne({ "uid": object.uid} );
if (commonInBoth != null) {
printjson(commonInBoth) ;
printjson(object) ;
}else {
// did not match so we don't care in this case
}
});
Here's an example of a "join" * Actors and Movies collections:
https://github.com/mongodb/cookbook/blob/master/content/patterns/pivot.txt
It makes use of .mapReduce() method
* join - an alternative to join in document-oriented databases
$lookup (aggregation)
Performs a left outer join to an unsharded collection in the same database to filter in documents from the “joined” collection for processing. To each input document, the $lookup stage adds a new array field whose elements are the matching documents from the “joined” collection. The $lookup stage passes these reshaped documents to the next stage.
The $lookup stage has the following syntaxes:
Equality Match
To perform an equality match between a field from the input documents with a field from the documents of the “joined” collection, the $lookup stage has the following syntax:
{
$lookup:
{
from: <collection to join>,
localField: <field from the input documents>,
foreignField: <field from the documents of the "from" collection>,
as: <output array field>
}
}
The operation would correspond to the following pseudo-SQL statement:
SELECT *, <output array field>
FROM collection
WHERE <output array field> IN (SELECT <documents as determined from the pipeline>
FROM <collection to join>
WHERE <pipeline> );
Mongo URL
It depends on what you're trying to do.
You currently have it set up as a normalized database, which is fine, and the way you are doing it is appropriate.
However, there are other ways of doing it.
You could have a posts collection that has imbedded comments for each post with references to the users that you can iteratively query to get. You could store the user's name with the comments, you could store them all in one document.
The thing with NoSQL is it's designed for flexible schemas and very fast reading and writing. In a typical Big Data farm the database is the biggest bottleneck, you have fewer database engines than you do application and front end servers...they're more expensive but more powerful, also hard drive space is very cheap comparatively. Normalization comes from the concept of trying to save space, but it comes with a cost at making your databases perform complicated Joins and verifying the integrity of relationships, performing cascading operations. All of which saves the developers some headaches if they designed the database properly.
With NoSQL, if you accept that redundancy and storage space aren't issues because of their cost (both in processor time required to do updates and hard drive costs to store extra data), denormalizing isn't an issue (for embedded arrays that become hundreds of thousands of items it can be a performance issue, but most of the time that's not a problem). Additionally you'll have several application and front end servers for every database cluster. Have them do the heavy lifting of the joins and let the database servers stick to reading and writing.
TL;DR: What you're doing is fine, and there are other ways of doing it. Check out the mongodb documentation's data model patterns for some great examples. http://docs.mongodb.org/manual/data-modeling/
There is a specification that a lot of drivers support that's called DBRef.
DBRef is a more formal specification for creating references between documents. DBRefs (generally) include a collection name as well as an object id. Most developers only use DBRefs if the collection can change from one document to the next. If your referenced collection will always be the same, the manual references outlined above are more efficient.
Taken from MongoDB Documentation: Data Models > Data Model Reference >
Database References
Before 3.2.6, Mongodb does not support join query as like mysql. below solution which works for you.
db.getCollection('comments').aggregate([
{$match : {pid : 444}},
{$lookup: {from: "users",localField: "uid",foreignField: "uid",as: "userData"}},
])
You can run SQL queries including join on MongoDB with mongo_fdw from Postgres.
MongoDB does not allow joins, but you can use plugins to handle that. Check the mongo-join plugin. It's the best and I have already used it. You can install it using npm directly like this npm install mongo-join. You can check out the full documentation with examples.
(++) really helpful tool when we need to join (N) collections
(--) we can apply conditions just on the top level of the query
Example
var Join = require('mongo-join').Join, mongodb = require('mongodb'), Db = mongodb.Db, Server = mongodb.Server;
db.open(function (err, Database) {
Database.collection('Appoint', function (err, Appoints) {
/* we can put conditions just on the top level */
Appoints.find({_id_Doctor: id_doctor ,full_date :{ $gte: start_date },
full_date :{ $lte: end_date }}, function (err, cursor) {
var join = new Join(Database).on({
field: '_id_Doctor', // <- field in Appoints document
to: '_id', // <- field in User doc. treated as ObjectID automatically.
from: 'User' // <- collection name for User doc
}).on({
field: '_id_Patient', // <- field in Appoints doc
to: '_id', // <- field in User doc. treated as ObjectID automatically.
from: 'User' // <- collection name for User doc
})
join.toArray(cursor, function (err, joinedDocs) {
/* do what ever you want here */
/* you can fetch the table and apply your own conditions */
.....
.....
.....
resp.status(200);
resp.json({
"status": 200,
"message": "success",
"Appoints_Range": joinedDocs,
});
return resp;
});
});
You can do it using the aggregation pipeline, but it's a pain to write it yourself.
You can use mongo-join-query to create the aggregation pipeline automatically from your query.
This is how your query would look like:
const mongoose = require("mongoose");
const joinQuery = require("mongo-join-query");
joinQuery(
mongoose.models.Comment,
{
find: { pid:444 },
populate: ["uid"]
},
(err, res) => (err ? console.log("Error:", err) : console.log("Success:", res.results))
);
Your result would have the user object in the uid field and you can link as many levels deep as you want. You can populate the reference to the user, which makes reference to a Team, which makes reference to something else, etc..
Disclaimer: I wrote mongo-join-query to tackle this exact problem.
playORM can do it for you using S-SQL(Scalable SQL) which just adds partitioning such that you can do joins within partitions.
Nope, it doesn't seem like you're doing it wrong. MongoDB joins are "client side". Pretty much like you said:
At the moment, I am first getting the comments which match my criteria, then figuring out all the uid's in that result set, getting the user objects, and merging them with the comment's results. Seems like I am doing it wrong.
1) Select from the collection you're interested in.
2) From that collection pull out ID's you need
3) Select from other collections
4) Decorate your original results.
It's not a "real" join, but it's actually alot more useful than a SQL join because you don't have to deal with duplicate rows for "many" sided joins, instead your decorating the originally selected set.
There is alot of nonsense and FUD on this page. Turns out 5 years later MongoDB is still a thing.
I think, if You need normalized data tables - You need to try some other database solutions.
But I've foun that sollution for MOngo on Git
By the way, in inserts code - it has movie's name, but noi movie's ID.
Problem
You have a collection of Actors with an array of the Movies they've done.
You want to generate a collection of Movies with an array of Actors in each.
Some sample data
db.actors.insert( { actor: "Richard Gere", movies: ['Pretty Woman', 'Runaway Bride', 'Chicago'] });
db.actors.insert( { actor: "Julia Roberts", movies: ['Pretty Woman', 'Runaway Bride', 'Erin Brockovich'] });
Solution
We need to loop through each movie in the Actor document and emit each Movie individually.
The catch here is in the reduce phase. We cannot emit an array from the reduce phase, so we must build an Actors array inside of the "value" document that is returned.
The code
map = function() {
for(var i in this.movies){
key = { movie: this.movies[i] };
value = { actors: [ this.actor ] };
emit(key, value);
}
}
reduce = function(key, values) {
actor_list = { actors: [] };
for(var i in values) {
actor_list.actors = values[i].actors.concat(actor_list.actors);
}
return actor_list;
}
Notice how actor_list is actually a javascript object that contains an array. Also notice that map emits the same structure.
Run the following to execute the map / reduce, output it to the "pivot" collection and print the result:
printjson(db.actors.mapReduce(map, reduce, "pivot"));
db.pivot.find().forEach(printjson);
Here is the sample output, note that "Pretty Woman" and "Runaway Bride" have both "Richard Gere" and "Julia Roberts".
{ "_id" : { "movie" : "Chicago" }, "value" : { "actors" : [ "Richard Gere" ] } }
{ "_id" : { "movie" : "Erin Brockovich" }, "value" : { "actors" : [ "Julia Roberts" ] } }
{ "_id" : { "movie" : "Pretty Woman" }, "value" : { "actors" : [ "Richard Gere", "Julia Roberts" ] } }
{ "_id" : { "movie" : "Runaway Bride" }, "value" : { "actors" : [ "Richard Gere", "Julia Roberts" ] } }
We can merge two collection by using mongoDB sub query. Here is example,
Commentss--
`db.commentss.insert([
{ uid:12345, pid:444, comment:"blah" },
{ uid:12345, pid:888, comment:"asdf" },
{ uid:99999, pid:444, comment:"qwer" }])`
Userss--
db.userss.insert([
{ uid:12345, name:"john" },
{ uid:99999, name:"mia" }])
MongoDB sub query for JOIN--
`db.commentss.find().forEach(
function (newComments) {
newComments.userss = db.userss.find( { "uid": newComments.uid } ).toArray();
db.newCommentUsers.insert(newComments);
}
);`
Get result from newly generated Collection--
db.newCommentUsers.find().pretty()
Result--
`{
"_id" : ObjectId("5511236e29709afa03f226ef"),
"uid" : 12345,
"pid" : 444,
"comment" : "blah",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f2"),
"uid" : 12345,
"name" : "john"
}
]
}
{
"_id" : ObjectId("5511236e29709afa03f226f0"),
"uid" : 12345,
"pid" : 888,
"comment" : "asdf",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f2"),
"uid" : 12345,
"name" : "john"
}
]
}
{
"_id" : ObjectId("5511236e29709afa03f226f1"),
"uid" : 99999,
"pid" : 444,
"comment" : "qwer",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f3"),
"uid" : 99999,
"name" : "mia"
}
]
}`
Hope so this will help.
How do I perform the SQL Join equivalent in MongoDB?
For example say you have two collections (users and comments) and I want to pull all the comments with pid=444 along with the user info for each.
comments
{ uid:12345, pid:444, comment="blah" }
{ uid:12345, pid:888, comment="asdf" }
{ uid:99999, pid:444, comment="qwer" }
users
{ uid:12345, name:"john" }
{ uid:99999, name:"mia" }
Is there a way to pull all the comments with a certain field (eg. ...find({pid:444}) ) and the user information associated with each comment in one go?
At the moment, I am first getting the comments which match my criteria, then figuring out all the uid's in that result set, getting the user objects, and merging them with the comment's results. Seems like I am doing it wrong.
As of Mongo 3.2 the answers to this question are mostly no longer correct. The new $lookup operator added to the aggregation pipeline is essentially identical to a left outer join:
https://docs.mongodb.org/master/reference/operator/aggregation/lookup/#pipe._S_lookup
From the docs:
{
$lookup:
{
from: <collection to join>,
localField: <field from the input documents>,
foreignField: <field from the documents of the "from" collection>,
as: <output array field>
}
}
Of course Mongo is not a relational database, and the devs are being careful to recommend specific use cases for $lookup, but at least as of 3.2 doing join is now possible with MongoDB.
We can merge/join all data inside only one collection with a easy function in few lines using the mongodb client console, and now we could be able of perform the desired query.
Below a complete example,
.- Authors:
db.authors.insert([
{
_id: 'a1',
name: { first: 'orlando', last: 'becerra' },
age: 27
},
{
_id: 'a2',
name: { first: 'mayra', last: 'sanchez' },
age: 21
}
]);
.- Categories:
db.categories.insert([
{
_id: 'c1',
name: 'sci-fi'
},
{
_id: 'c2',
name: 'romance'
}
]);
.- Books
db.books.insert([
{
_id: 'b1',
name: 'Groovy Book',
category: 'c1',
authors: ['a1']
},
{
_id: 'b2',
name: 'Java Book',
category: 'c2',
authors: ['a1','a2']
},
]);
.- Book lending
db.lendings.insert([
{
_id: 'l1',
book: 'b1',
date: new Date('01/01/11'),
lendingBy: 'jose'
},
{
_id: 'l2',
book: 'b1',
date: new Date('02/02/12'),
lendingBy: 'maria'
}
]);
.- The magic:
db.books.find().forEach(
function (newBook) {
newBook.category = db.categories.findOne( { "_id": newBook.category } );
newBook.lendings = db.lendings.find( { "book": newBook._id } ).toArray();
newBook.authors = db.authors.find( { "_id": { $in: newBook.authors } } ).toArray();
db.booksReloaded.insert(newBook);
}
);
.- Get the new collection data:
db.booksReloaded.find().pretty()
.- Response :)
{
"_id" : "b1",
"name" : "Groovy Book",
"category" : {
"_id" : "c1",
"name" : "sci-fi"
},
"authors" : [
{
"_id" : "a1",
"name" : {
"first" : "orlando",
"last" : "becerra"
},
"age" : 27
}
],
"lendings" : [
{
"_id" : "l1",
"book" : "b1",
"date" : ISODate("2011-01-01T00:00:00Z"),
"lendingBy" : "jose"
},
{
"_id" : "l2",
"book" : "b1",
"date" : ISODate("2012-02-02T00:00:00Z"),
"lendingBy" : "maria"
}
]
}
{
"_id" : "b2",
"name" : "Java Book",
"category" : {
"_id" : "c2",
"name" : "romance"
},
"authors" : [
{
"_id" : "a1",
"name" : {
"first" : "orlando",
"last" : "becerra"
},
"age" : 27
},
{
"_id" : "a2",
"name" : {
"first" : "mayra",
"last" : "sanchez"
},
"age" : 21
}
],
"lendings" : [ ]
}
I hope this lines can help you.
This page on the official mongodb site addresses exactly this question:
https://mongodb-documentation.readthedocs.io/en/latest/ecosystem/tutorial/model-data-for-ruby-on-rails.html
When we display our list of stories, we'll need to show the name of the user who posted the story. If we were using a relational database, we could perform a join on users and stores, and get all our objects in a single query. But MongoDB does not support joins and so, at times, requires bit of denormalization. Here, this means caching the 'username' attribute.
Relational purists may be feeling uneasy already, as if we were violating some universal law. But let’s bear in mind that MongoDB collections are not equivalent to relational tables; each serves a unique design objective. A normalized table provides an atomic, isolated chunk of data. A document, however, more closely represents an object as a whole. In the case of a social news site, it can be argued that a username is intrinsic to the story being posted.
You have to do it the way you described. MongoDB is a non-relational database and doesn't support joins.
With right combination of $lookup, $project and $match, you can join mutiple tables on multiple parameters. This is because they can be chained multiple times.
Suppose we want to do following (reference)
SELECT S.* FROM LeftTable S
LEFT JOIN RightTable R ON S.ID = R.ID AND S.MID = R.MID
WHERE R.TIM > 0 AND S.MOB IS NOT NULL
Step 1: Link all tables
you can $lookup as many tables as you want.
$lookup - one for each table in query
$unwind - correctly denormalises data , else it'd be wrapped in arrays
Python code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "R"}
])
Step 2: Define all conditionals
$project : define all conditional statements here, plus all the variables you'd like to select.
Python Code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "R"},
# define conditionals + variables
{"$project": {
"midEq": {"$eq": ["$MID", "$R.MID"]},
"ID": 1, "MOB": 1, "MID": 1
}}
])
Step 3: Join all the conditionals
$match - join all conditions using OR or AND etc. There can be multiples of these.
$project: undefine all conditionals
Complete Python Code..
db.LeftTable.aggregate([
# connect all tables
{"$lookup": {
"from": "RightTable",
"localField": "ID",
"foreignField": "ID",
"as": "R"
}},
{"$unwind": "$R"},
# define conditionals + variables
{"$project": {
"midEq": {"$eq": ["$MID", "$R.MID"]},
"ID": 1, "MOB": 1, "MID": 1
}},
# join all conditionals
{"$match": {
"$and": [
{"R.TIM": {"$gt": 0}},
{"MOB": {"$exists": True}},
{"midEq": {"$eq": True}}
]}},
# undefine conditionals
{"$project": {
"midEq": 0
}}
])
Pretty much any combination of tables, conditionals and joins can be done in this manner.
You can join two collection in Mongo by using lookup which is offered in 3.2 version. In your case the query would be
db.comments.aggregate({
$lookup:{
from:"users",
localField:"uid",
foreignField:"uid",
as:"users_comments"
}
})
or you can also join with respect to users then there will be a little change as given below.
db.users.aggregate({
$lookup:{
from:"comments",
localField:"uid",
foreignField:"uid",
as:"users_comments"
}
})
It will work just same as left and right join in SQL.
As others have pointed out you are trying to create a relational database from none relational database which you really don't want to do but anyways, if you have a case that you have to do this here is a solution you can use. We first do a foreach find on collection A( or in your case users) and then we get each item as an object then we use object property (in your case uid) to lookup in our second collection (in your case comments) if we can find it then we have a match and we can print or do something with it.
Hope this helps you and good luck :)
db.users.find().forEach(
function (object) {
var commonInBoth=db.comments.findOne({ "uid": object.uid} );
if (commonInBoth != null) {
printjson(commonInBoth) ;
printjson(object) ;
}else {
// did not match so we don't care in this case
}
});
Here's an example of a "join" * Actors and Movies collections:
https://github.com/mongodb/cookbook/blob/master/content/patterns/pivot.txt
It makes use of .mapReduce() method
* join - an alternative to join in document-oriented databases
$lookup (aggregation)
Performs a left outer join to an unsharded collection in the same database to filter in documents from the “joined” collection for processing. To each input document, the $lookup stage adds a new array field whose elements are the matching documents from the “joined” collection. The $lookup stage passes these reshaped documents to the next stage.
The $lookup stage has the following syntaxes:
Equality Match
To perform an equality match between a field from the input documents with a field from the documents of the “joined” collection, the $lookup stage has the following syntax:
{
$lookup:
{
from: <collection to join>,
localField: <field from the input documents>,
foreignField: <field from the documents of the "from" collection>,
as: <output array field>
}
}
The operation would correspond to the following pseudo-SQL statement:
SELECT *, <output array field>
FROM collection
WHERE <output array field> IN (SELECT <documents as determined from the pipeline>
FROM <collection to join>
WHERE <pipeline> );
Mongo URL
It depends on what you're trying to do.
You currently have it set up as a normalized database, which is fine, and the way you are doing it is appropriate.
However, there are other ways of doing it.
You could have a posts collection that has imbedded comments for each post with references to the users that you can iteratively query to get. You could store the user's name with the comments, you could store them all in one document.
The thing with NoSQL is it's designed for flexible schemas and very fast reading and writing. In a typical Big Data farm the database is the biggest bottleneck, you have fewer database engines than you do application and front end servers...they're more expensive but more powerful, also hard drive space is very cheap comparatively. Normalization comes from the concept of trying to save space, but it comes with a cost at making your databases perform complicated Joins and verifying the integrity of relationships, performing cascading operations. All of which saves the developers some headaches if they designed the database properly.
With NoSQL, if you accept that redundancy and storage space aren't issues because of their cost (both in processor time required to do updates and hard drive costs to store extra data), denormalizing isn't an issue (for embedded arrays that become hundreds of thousands of items it can be a performance issue, but most of the time that's not a problem). Additionally you'll have several application and front end servers for every database cluster. Have them do the heavy lifting of the joins and let the database servers stick to reading and writing.
TL;DR: What you're doing is fine, and there are other ways of doing it. Check out the mongodb documentation's data model patterns for some great examples. http://docs.mongodb.org/manual/data-modeling/
There is a specification that a lot of drivers support that's called DBRef.
DBRef is a more formal specification for creating references between documents. DBRefs (generally) include a collection name as well as an object id. Most developers only use DBRefs if the collection can change from one document to the next. If your referenced collection will always be the same, the manual references outlined above are more efficient.
Taken from MongoDB Documentation: Data Models > Data Model Reference >
Database References
Before 3.2.6, Mongodb does not support join query as like mysql. below solution which works for you.
db.getCollection('comments').aggregate([
{$match : {pid : 444}},
{$lookup: {from: "users",localField: "uid",foreignField: "uid",as: "userData"}},
])
You can run SQL queries including join on MongoDB with mongo_fdw from Postgres.
MongoDB does not allow joins, but you can use plugins to handle that. Check the mongo-join plugin. It's the best and I have already used it. You can install it using npm directly like this npm install mongo-join. You can check out the full documentation with examples.
(++) really helpful tool when we need to join (N) collections
(--) we can apply conditions just on the top level of the query
Example
var Join = require('mongo-join').Join, mongodb = require('mongodb'), Db = mongodb.Db, Server = mongodb.Server;
db.open(function (err, Database) {
Database.collection('Appoint', function (err, Appoints) {
/* we can put conditions just on the top level */
Appoints.find({_id_Doctor: id_doctor ,full_date :{ $gte: start_date },
full_date :{ $lte: end_date }}, function (err, cursor) {
var join = new Join(Database).on({
field: '_id_Doctor', // <- field in Appoints document
to: '_id', // <- field in User doc. treated as ObjectID automatically.
from: 'User' // <- collection name for User doc
}).on({
field: '_id_Patient', // <- field in Appoints doc
to: '_id', // <- field in User doc. treated as ObjectID automatically.
from: 'User' // <- collection name for User doc
})
join.toArray(cursor, function (err, joinedDocs) {
/* do what ever you want here */
/* you can fetch the table and apply your own conditions */
.....
.....
.....
resp.status(200);
resp.json({
"status": 200,
"message": "success",
"Appoints_Range": joinedDocs,
});
return resp;
});
});
You can do it using the aggregation pipeline, but it's a pain to write it yourself.
You can use mongo-join-query to create the aggregation pipeline automatically from your query.
This is how your query would look like:
const mongoose = require("mongoose");
const joinQuery = require("mongo-join-query");
joinQuery(
mongoose.models.Comment,
{
find: { pid:444 },
populate: ["uid"]
},
(err, res) => (err ? console.log("Error:", err) : console.log("Success:", res.results))
);
Your result would have the user object in the uid field and you can link as many levels deep as you want. You can populate the reference to the user, which makes reference to a Team, which makes reference to something else, etc..
Disclaimer: I wrote mongo-join-query to tackle this exact problem.
playORM can do it for you using S-SQL(Scalable SQL) which just adds partitioning such that you can do joins within partitions.
Nope, it doesn't seem like you're doing it wrong. MongoDB joins are "client side". Pretty much like you said:
At the moment, I am first getting the comments which match my criteria, then figuring out all the uid's in that result set, getting the user objects, and merging them with the comment's results. Seems like I am doing it wrong.
1) Select from the collection you're interested in.
2) From that collection pull out ID's you need
3) Select from other collections
4) Decorate your original results.
It's not a "real" join, but it's actually alot more useful than a SQL join because you don't have to deal with duplicate rows for "many" sided joins, instead your decorating the originally selected set.
There is alot of nonsense and FUD on this page. Turns out 5 years later MongoDB is still a thing.
I think, if You need normalized data tables - You need to try some other database solutions.
But I've foun that sollution for MOngo on Git
By the way, in inserts code - it has movie's name, but noi movie's ID.
Problem
You have a collection of Actors with an array of the Movies they've done.
You want to generate a collection of Movies with an array of Actors in each.
Some sample data
db.actors.insert( { actor: "Richard Gere", movies: ['Pretty Woman', 'Runaway Bride', 'Chicago'] });
db.actors.insert( { actor: "Julia Roberts", movies: ['Pretty Woman', 'Runaway Bride', 'Erin Brockovich'] });
Solution
We need to loop through each movie in the Actor document and emit each Movie individually.
The catch here is in the reduce phase. We cannot emit an array from the reduce phase, so we must build an Actors array inside of the "value" document that is returned.
The code
map = function() {
for(var i in this.movies){
key = { movie: this.movies[i] };
value = { actors: [ this.actor ] };
emit(key, value);
}
}
reduce = function(key, values) {
actor_list = { actors: [] };
for(var i in values) {
actor_list.actors = values[i].actors.concat(actor_list.actors);
}
return actor_list;
}
Notice how actor_list is actually a javascript object that contains an array. Also notice that map emits the same structure.
Run the following to execute the map / reduce, output it to the "pivot" collection and print the result:
printjson(db.actors.mapReduce(map, reduce, "pivot"));
db.pivot.find().forEach(printjson);
Here is the sample output, note that "Pretty Woman" and "Runaway Bride" have both "Richard Gere" and "Julia Roberts".
{ "_id" : { "movie" : "Chicago" }, "value" : { "actors" : [ "Richard Gere" ] } }
{ "_id" : { "movie" : "Erin Brockovich" }, "value" : { "actors" : [ "Julia Roberts" ] } }
{ "_id" : { "movie" : "Pretty Woman" }, "value" : { "actors" : [ "Richard Gere", "Julia Roberts" ] } }
{ "_id" : { "movie" : "Runaway Bride" }, "value" : { "actors" : [ "Richard Gere", "Julia Roberts" ] } }
We can merge two collection by using mongoDB sub query. Here is example,
Commentss--
`db.commentss.insert([
{ uid:12345, pid:444, comment:"blah" },
{ uid:12345, pid:888, comment:"asdf" },
{ uid:99999, pid:444, comment:"qwer" }])`
Userss--
db.userss.insert([
{ uid:12345, name:"john" },
{ uid:99999, name:"mia" }])
MongoDB sub query for JOIN--
`db.commentss.find().forEach(
function (newComments) {
newComments.userss = db.userss.find( { "uid": newComments.uid } ).toArray();
db.newCommentUsers.insert(newComments);
}
);`
Get result from newly generated Collection--
db.newCommentUsers.find().pretty()
Result--
`{
"_id" : ObjectId("5511236e29709afa03f226ef"),
"uid" : 12345,
"pid" : 444,
"comment" : "blah",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f2"),
"uid" : 12345,
"name" : "john"
}
]
}
{
"_id" : ObjectId("5511236e29709afa03f226f0"),
"uid" : 12345,
"pid" : 888,
"comment" : "asdf",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f2"),
"uid" : 12345,
"name" : "john"
}
]
}
{
"_id" : ObjectId("5511236e29709afa03f226f1"),
"uid" : 99999,
"pid" : 444,
"comment" : "qwer",
"userss" : [
{
"_id" : ObjectId("5511238129709afa03f226f3"),
"uid" : 99999,
"name" : "mia"
}
]
}`
Hope so this will help.
I have collection structure like this.
application_data: {
name : A,
site : B,
location : [
{ key1 : value1, key2 : value2},
{ key3 : value3, key4 : value4}
]
}
Now I want to add a another array to "location" as a sub document so that my location becomes
location : [
{ key1 : value1, key2 : value2},
{ key3 : value3, key4 : value4, key5 :[{subkey1:subvalue1, subkey2:subvalue2}]}
]
I tried $push & $addToSet which did not help me. Can somebody help me?
Helpful if you explain an example using nodejs.
What you'r actually trying to do is to add new field to an existing subdocument. You can do it using $set and positional operator $:
db.applications.update({
name: 'A', // querying for parent document
'location.key3': 'value3' // querying for an exact subdocument to add new field to
}, {
$set: {
'location.$.key5': [{
subkey1: 'subvalue1',
subkey2: 'subvalue2'
}]
}
})
You can achieve the same result using $push or $addToSet, which is better if you want to add more than one subsubdocument to 'location.key5':
db.applications.update({
name: 'A',
'location.key3': 'value3'
}, {
$push: {
'location.$.key5': {
subkey1: 'subvalue1',
subkey2: 'subvalue2'
}
}
})
or
db.applications.update({
name: 'A',
'location.key3': 'value3'
}, {
$addToSet: {
'location.$.key5': {
subkey1: 'subvalue1',
subkey2: 'subvalue2'
}
}
})
See Update Documents in an Array for more info.
in my collection each document has 2 dates, modified and sync. I would like to find those which modified > sync, or sync does not exist.
I tried
{'modified': { $gt : 'sync' }}
but it's not showing what I expected. Any ideas?
Thanks
You can not compare a field with the value of another field with the normal query matching. However, you can do this with the aggregation framework:
db.so.aggregate( [
{ $match: …your normal other query… },
{ $match: { $eq: [ '$modified', '$sync' ] } }
] );
I put …your normal other query… in there as you can make that bit use the index. So if you want to do this for only documents where the name field is charles you can do:
db.so.ensureIndex( { name: 1 } );
db.so.aggregate( [
{ $match: { name: 'charles' } },
{ $project: {
modified: 1,
sync: 1,
name: 1,
eq: { $cond: [ { $gt: [ '$modified', '$sync' ] }, 1, 0 ] }
} },
{ $match: { eq: 1 } }
] );
With the input:
{ "_id" : ObjectId("520276459bf0f0f3a6e4589c"), "modified" : 73845345, "sync" : 73234 }
{ "_id" : ObjectId("5202764f9bf0f0f3a6e4589d"), "modified" : 4, "sync" : 4 }
{ "_id" : ObjectId("5202765b9bf0f0f3a6e4589e"), "modified" : 4, "sync" : 4, "name" : "charles" }
{ "_id" : ObjectId("5202765e9bf0f0f3a6e4589f"), "modified" : 4, "sync" : 45, "name" : "charles" }
{ "_id" : ObjectId("520276949bf0f0f3a6e458a1"), "modified" : 46, "sync" : 45, "name" : "charles" }
This returns:
{
"result" : [
{
"_id" : ObjectId("520276949bf0f0f3a6e458a1"),
"modified" : 46,
"sync" : 45,
"name" : "charles",
"eq" : 1
}
],
"ok" : 1
}
If you want any more fields, you need to add them in the $project.
For MongoDB 3.6 and newer:
The $expr operator allows the use of aggregation expressions within the query language, thus you can do the following:
db.test.find({ "$expr": { "$gt": ["$modified", "$sync"] } })
or using aggregation framework with $match pipeline
db.test.aggregate([
{ "$match": { "$expr": { "$gt": ["$modified", "$sync"] } } }
])
For MongoDB 3.0+:
You can also use the aggregation framework with the $redact pipeline operator that allows you to process the logical condition with the $cond operator and uses the special operations $$KEEP to "keep" the document where the logical condition is true or $$PRUNE to "remove" the document where the condition was false.
Consider running the following aggregate operation which demonstrates the above concept:
db.test.aggregate([
{ "$redact": {
"$cond": [
{ "$gt": ["$modified", "$sync"] },
"$$KEEP",
"$$PRUNE"
]
} }
])
This operation is similar to having a $project pipeline that selects the fields in the collection and creates a new field that holds the result from the logical condition query and then a subsequent $match, except that $redact uses a single pipeline stage which is more efficient:
Simply
db.collection.find({$where:"this.modified>this.sync"})
Example
Kobkrits-MacBook-Pro-2:~ kobkrit$ mongo
MongoDB shell version: 3.2.3
connecting to: test
> db.time.insert({d1:new Date(), d2: new Date(new Date().getTime()+10000)})
WriteResult({ "nInserted" : 1 })
> db.time.find()
{ "_id" : ObjectId("577a619493653ac93093883f"), "d1" : ISODate("2016-07-04T13:16:04.167Z"), "d2" : ISODate("2016-07-04T13:16:14.167Z") }
> db.time.find({$where:"this.d1<this.d2"})
{ "_id" : ObjectId("577a619493653ac93093883f"), "d1" : ISODate("2016-07-04T13:16:04.167Z"), "d2" : ISODate("2016-07-04T13:16:14.167Z") }
> db.time.find({$where:"this.d1>this.d2"})
> db.time.find({$where:"this.d1==this.d2"})
>
Use Javascript, use foreach And convert Date To toDateString()
db.ledgers.find({}).forEach(function(item){
if(item.fromdate.toDateString() == item.todate.toDateString())
{
printjson(item)
}
})
Right now your query is trying to return all results such that the modified field is greater than the word 'sync'. Try getting rid of the quotes around sync and see if that fixes anything. Otherwise, I did a little research and found this question. What you're trying to do just might not be possible in a single query, but you should be able to manipulate your data once you pull everything from the database.
To fix this issue without aggregation change your query to this:
{'modified': { $gt : ISODate(this.sync) }}