I am a complete novice to programming. I am trying to parse and format 'broken' rows (rogue lf's in the file instead of the \cr\lf windows format) in a txt file. Using python 3.4 and reading these types of posts I have managed to read the source files and create a file with only the broken rows in it with all the lf's removed so its one long line. Now I need to read the line and count the delimiters which are in this format '<|>' and after the 36th one add a newline then continue counting the next 36 and add a newline etc. I have tried a few different things but have got stuck as I am not sure if I need to .tell() then .seek() to insert the \n. Any suggestions as to how to insert the newline char after the 36th delimiter please?
my_count = 36 # define the number of delimiters to count
LineNumber = 1 # define line counter
FileName = 'Broken_Registrations.txt' # variable to define filename
target = open('Target.txt','w',encoding='utf-8') # open a file to write fixed lines
with open(FileName,encoding="utf8") as file:
for line in file: # open file read
cnt=line.count('<|>') # count delimiters
if cnt == mycount: # count until mycount then
target.write(line).append("\n") # write line and append new line char
print('DONE!') # let me know when you finished
target.close() # close the file opened outside of the with
ok i managed it, it was simple all along, although there is probably a much more efficient way to do it but this worked for me
#import pdb
#pdb.set_trace()
my_count = 36
LineNumber = 1 # define line counter
FileName = 'Broken_Registrations.txt' # variable to define filename
target = open('Target.txt','w',encoding='utf-8') # open a file to write fixed lines
with open(FileName,encoding="utf8") as file:
for line in file: # open file read
cnt=line.count('<|>') # count delimiters
if cnt == my_count: # count until mycount then
line = line.rstrip() # remove whitespace
target.write(line +"\n") # write line and append new line char
print('DONE!') # let me know when you finished
target.close() # close the file opened outside of the with
Related
I am a little bit confused in how to read all lines in many files where the file names have format from "datalog.txt.98" to "datalog.txt.120".
This is my code:
import json
file = "datalog.txt."
i = 97
for line in file:
i+=1
f = open (line + str (i),'r')
for row in f:
print (row)
Here, you will find an example of one line in one of those files:
I need really to your help
I suggest using a loop for opening multiple files with different formats.
To better understand this project I would recommend researching the following topics
for loops,
String manipulation,
Opening a file and reading its content,
List manipulation,
String parsing.
This is one of my favourite beginner guides.
To set the parameters of the integers at the end of the file name I would look into python for loops.
I think this is what you are trying to do
# create a list to store all your file content
files_content = []
# the prefix is of type string
filename_prefix = "datalog.txt."
# loop from 0 to 13
for i in range(0,14):
# make the filename variable with the prefix and
# the integer i which you need to convert to a string type
filename = filename_prefix + str(i)
# open the file read all the lines to a variable
with open(filename) as f:
content = f.readlines()
# append the file content to the files_content list
files_content.append(content)
To get rid of white space from file parsing add the missing line
content = [x.strip() for x in content]
files_content.append(content)
Here's an example of printing out files_content
for file in files_content:
print(file)
Firstly, I would like to say that I am newbie in Python.
I will ll try to explain my problem as best as I can.
The main aim of the code is to be able to read, modify and copy a txt file.
In order to do that I would like to split the problem up in three different steps.
1 - Copy the first N lines into a new txt file (CopyFile), exactly as they are in the original file (OrigFile)
2 - Access to a specific line where I want to change a float number for other. I want to append this line to CopyFile.
3 - Copy the rest of the OrigFile from line in point 2 to the end of the file.
At the moment I have been able to do step 1 with next code:
with open("OrigFile.txt") as myfile:
head = [next(myfile) for x iin range(10)] #read first 10 lines of txt file
copy = open("CopyFile.txt", "w") #create a txt file named CopyFile.txt
copy.write("".join(head)) #convert list into str
copy.close #close txt file
For the second step, my idea is to access directly to the txt line I am interested in and recognize the float number I would like to change. Code:
line11 = linecache.getline("OrigFile.txt", 11) #opening and accessing directly to line 11
FltNmb = re.findall("\d+\.\d+", line11) #regular expressions to identify float numbers
My problem comes when I need to change FltNmb for a new one, taking into consideration that I need to specify it inside the line11. How could I achieve that?
Open both files and write each line sequentially while incrementing line counter.
Condition for line 11 to replace the float number. Rest of the lines are written without modifications:
with open("CopyFile.txt", "w") as newfile:
with open("OrigFile.txt") as myfile:
linecounter = 1
for line in myfile:
if linecounter == 11:
newline = re.sub("^(\d+\.\d+)", "<new number>", line)
linecounter += 1
outfile.write(newline)
else:
newfile.write(line)
linecounter += 1
I've read every thing I can find and tried about 20 examples from SO and google, and nothing seems to work.
This should be very simple, but I cannot get it to work. I just want to point to a folder, and replace every double quote in every file in the folder. That is it. (And I don't know Python well at all, hence my issues.) I have no doubt that some of the scripts I've tried to retask must work, but my lack of Python skill is getting in the way. This is as close as I've gotten, and I get errors. If I don't get errors it seems to do nothing. Thanks.
import glob
import csv
mypath = glob.glob('\\C:\\csv\\*.csv')
for fname in mypath:
with open(mypath, "r") as infile, open("output.csv", "w") as outfile:
reader = csv.reader(infile)
writer = csv.writer(outfile)
for row in reader:
writer.writerow(item.replace("""", "") for item in row)
You don't need to use csv-specific file opening and writing, I think that makes it more complex. How about this instead:
import os
mypath = r'\path\to\folder'
for file in os.listdir(mypath): # This will loop through every file in the folder
if '.csv' in file: # Check if it's a csv file
fpath = os.path.join(mypath, file)
fpath_out = fpath + '_output' # Create an output file with a similar name to the input file
with open(fpath) as infile
lines = infile.readlines() # Read all lines
with open(fpath_out, 'w') as outfile:
for line in lines: # One line at a time
outfile.write(line.replace('"', '')) # Remove each " and write the line
Let me know if this works, and respond with any error messages you may have.
I found the solution to this based on the original answer provided by u/Jeff. It was actually smart quotes (u'\u201d') to be exact, not straight quotes. That is why I could get nothing to work. That is a great way to spend like two days, now if you'll excuse me I have to go jump off the roof. But for posterity, here is what I used that worked. (And note - there is the left curving smart quote as well - that is u'\u201c'.
mypath = 'C:\\csv\\'
myoutputpath = 'C:\\csv\\output\\'
for file in os.listdir(mypath): # This will loop through every file in the folder
if '.csv' in file: # Check if it's a csv file
fpath = os.path.join(mypath, file)
fpath_out = os.path.join(myoutputpath, file) #+ '_output' # Create an output file with a similar name to the input file
with open(fpath) as infile:
lines = infile.readlines() # Read all lines
with open(fpath_out, 'w') as outfile:
for line in lines: # One line at a time
outfile.write(line.replace(u'\u201d', ''))# Remove each " and write the line
infile.close()
outfile.close()
Ive a csv file that I would like to get all the rows in one column. Ive tried importing into MS Excel or Formatting it with Notedpad++ . However with each try it considers a piece of data as a new row.
How can I format file with pythons csv module so that it removes a string "BRAS" and corrects the format. Each row is found between a quote " and delimiter is a pipe |.
Update:
"aa|bb|cc|dd|
ee|ff"
"ba|bc|bd|be|
bf"
"ca|cb|cd|
ce|cf"
The above is supposed to be 3 rows, however my editors see them as 5 rows or 6 and so forth.
import csv
import fileinput
with open('ventoya.csv') as f, open('ventoya2.csv', 'w') as w:
for line in f:
if 'BRAS' not in line:
w.write(line)
N.B I get a unicode error when trying to use in python.
return codecs.charmap_decode(input,self.errors,decoding_table)[0]
UnicodeDecodeError: 'charmap' codec can't decode byte 0x8f in position 18: character maps to <undefined>
This is a quick hack for small input files (the content is read to memory).
#!python2
fnameIn = 'ventoya.csv'
fnameOut = 'ventoya2.csv'
with open(fnameIn) as fin, open(fnameOut, 'w') as fout:
data = fin.read() # content of the input file
data = data.replace('\n', '') # make it one line
data = data.replace('""', '|') # split char instead of doubled ""
data = data.replace('"', '') # remove the first and last "
print data
for x in data.split('|'): # split by bar
fout.write(x + '\n') # write to separate lines
Or if the goal is only to fix the extra (unwanted) newline to form a single-column CSV file, the file can be fixed first, and then read through the csv module:
#!python2
import csv
fnameIn = 'ventoya.csv'
fnameFixed = 'ventoyaFixed.csv'
fnameOut = 'ventoya2.csv'
# Fix the input file.
with open(fnameIn) as fin, open(fnameFixed, 'w') as fout:
data = fin.read() # content of the file
data = data.replace('\n', '') # remove the newlines
data = data.replace('""', '"\n"') # add the newlines back between the cells
fout.write(data)
# It is an overkill, but now the fixed file can be read using
# the csv module.
with open(fnameFixed, 'rb') as fin, open(fnameOut, 'wb') as fout:
reader = csv.reader(fin)
writer = csv.writer(fout)
for row in reader:
writer.writerow(row)
For solving this you need not to go to even code.
1: Just open file in Notepad++
2: In first line select from | symble till next line
3: go to replace and replace the selected format with |
Search mode can be normal or extended :)
Well, since the line breaks are consistent, you could go in and do find/replace as suggested, but you could also do a quick conversion with your python script:
import csv
import fileinput
linecount = 0
with open('ventoya.csv') as f, open('ventoya2.csv', 'w') as w:
for line in f:
line = line.rstrip()
# remove unwanted breaks by concatenating pairs of rows
if linecount%2 == 0:
line1 = line
else:
full_line = line1 + line
full_line = full_line.replace(' ','')
# remove spaces from front of 2nd half of line
# if you want comma delimiters, uncomment next line:
# full_line = full_line.replace('|',',')
if 'BRAS' not in full_line:
w.write(full_line + '\n')
linecount += 1
This works for me with the test data, and if you want to change the delimiters while writing to file, you can. The nice thing about doing with code is: 1. you can do it with code (always fun) and 2. you can remove the line breaks and filter content to the written file at the same time.
Can you explain what is going on in this code? I don't seem to understand
how you can open the file and read it line by line instead of all of the sentences at the same time in a for loop. Thanks
Let's say I have these sentences in a document file:
cat:dog:mice
cat1:dog1:mice1
cat2:dog2:mice2
cat3:dog3:mice3
Here is the code:
from sys import argv
filename = input("Please enter the name of a file: ")
f = open(filename,'r')
d1ct = dict()
print("Number of times each animal visited each station:")
print("Animal Id Station 1 Station 2")
for line in f:
if '\n' == line[-1]:
line = line[:-1]
(AnimalId, Timestamp, StationId,) = line.split(':')
key = (AnimalId,StationId,)
if key not in d1ct:
d1ct[key] = 0
d1ct[key] += 1
The magic is at:
for line in f:
if '\n' == line[-1]:
line = line[:-1]
Python file objects are special in that they can be iterated over in a for loop. On each iteration, it retrieves the next line of the file. Because it includes the last character in the line, which could be a newline, it's often useful to check and remove the last character.
As Moshe wrote, open file objects can be iterated. Only, they are not of the file type in Python 3.x (as they were in Python 2.x). If the file object is opened in text mode, then the unit of iteration is one text line including the \n.
You can use line = line.rstrip() to remove the \n plus the trailing withespaces.
If you want to read the content of the file at once (into a multiline string), you can use content = f.read().
There is a minor bug in the code. The open file should always be closed. I means to use f.close() after the for loop. Or you can wrap the open to the newer with construct that will close the file for you -- I suggest to get used to the later approach.