I am trying to install oprofile on my ubuntu 15.04 by following the link:
Getting started with oprofile on Ubuntu
On my the other laptop whcih is running on ubuntu 14.04, it works well.
I can find the binary under /usb/bin directory.
However, I dont know why after typing the apt-get command
sudo apt-get update && sudo apt-get install oprofile
My ubuntu 15.04 still doesn't have oprofiled & opcontrol binary in /usr/bin.
Is there anyway I could check with?
Thanks
===================post updated =======================
Ubuntu 15.04 comes with oprofile 1.0.0, which no longer uses the opcontrol and oprofiled commands. If you want to follow that tutorial, install 0.9.9 from source code. oprofile download page on SourceForge.
Related
I came across a debian application by the name JavaPackage which can create a debian installation file (.deb) form a java binary (.tar.gz) which you can then install using dpkg -i application_name.deb. With Ubuntu being a debian-based linux distribution, it is possible that it can be installed on ubuntu as well.
How do I go about installing it on Ubuntu/Kubuntu 16.04.2 LTS?
java-package is available in the official ubuntu repositories. All you need to do is update the repository with the latest version then install it as shown below:
sudo apt-get update
sudo apt-get install java-package
I trying to install VirtualBox on Ubuntu 14.04. I've installed VirtualBox from Ubuntu repository:
sudo apt-get install virtualbox
Then I added my user to vboxusers:
sudo usermod -G vboxusers -a user
I also installed an extrapack for my vb vsion:
wget http://download.virtualbox.org/virtualbox/5.0.10/Oracle_VM_VirtualBox_Extension_Pack-4.3.36-105129.vbox-extpack
sudo vboxmanage extpack install Oracle_VM_VirtualBox_Extension_Pack-5.0.10-104061.vbox-extpack
But when I trying to start vm, I get an error:
RTR3InitEx failed with rc=-1912 (rc=-1912)The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing '/etc/init.d/vboxdrv setup'may correct this. Make sure that you do not mix the OSE version and the PUEL version of VirtualBox.
where: supR3HardenedMainInitRuntime
what: 4
VERR_VM_DRIVER_VERSION_MISMATCH (-1912) - The installed support driver doesn't match the version of the user.
And I have no /etc/init.d/vboxdrv file.
How can I fix this problem?
I've removed all the virualbox packages:
sudo apt-get purge 'virtualbox*'
Then I've installed virtualbox v.5
sudo apt-get install virtualbox-5.0
After that I've enabled virtualization in BIOS.
Now it works.
Check what version of virtualbox you installed
dpkg --list 'virtualbox*'
may be it's not aligned with the Extension pack.
Remove your installation
sudo apt-get autoremove 'virtualbox*'
Don't install fron Ubuntu repositories but run a fresh installation following the instuctions from official Oracle Virtualbox Download page about Debian-based Linux distributions.
Check that Virtualbox is running before installing the Extension pack.
I had the same error starting a vm client in ubuntu 16.4 .
Coincidentally I noticed in the file /var/crash/_usr_lib_virtualbox_VirtualBox.0.crash the following message:
Title: VirtualBox crashed with SIGABRT in QMessageLogger::fatal()
UnreportableReason: Sie haben einige veraltete Paketversionen
installiert. Bitte aktualisieren Sie die folgenen Pakete und prüfen
Sie, ob das Problem danach noch auftritt:
virtualbox-dkms
Translated: You have some outdated package versions installed. Please update the following packages and check, if the problem still occurs after that:
After the command:
sudo apt-get install --only-upgrade virtualbox-dkms
all was OK :)
I downloded android studio and I tried to install on ubuntu 16.04 64 bit but it has "unable to run mksdcard sdk tool" error.
I checked all solutions but they produce errors too.
Seems that the only package you need is lib32stdc++6 for ubuntu 16.04
sudo apt-get install lib32stdc++6
I just stumbled upon this issue myself.
I guess that you found this topic from 2015?
Well, the given solution is a bit outdated but still pertinent: the 64bit Ubuntu 16.04 is indeed missing the 32bits version of the libraries and the
lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6 libraries advised to be installed seems to have been removed from the official repos.
However You can still get them with using this command:
sudo apt-get install libz1:i386 libncurses5:i386 libbz2-1.0:i386 libstdc++6:i386
Then the installer should work just fine
Hope it will be of any help.
take a look at https://developer.android.com/studio/install.html
Select Linux...
Required libraries for 64-bit machines:
If you are running a 64-bit version of Ubuntu, you need to install some 32-bit libraries with the following command:
sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 lib32z1 libbz2-1.0:i386
If you are running 64-bit Fedora, the command is:
sudo yum install zlib.i686 ncurses-libs.i686 bzip2-libs.i686
For Ubuntu 18.04 and above versions, the following will work
sudo apt-get install libstdc++6:i386 libgcc1:i386 zlib1g:i386 libncurses5:i386
Ubuntu18.04
When I launch JD-GUI on my Ubuntu 12.04.3 (Precise Pangolin) 64 bits system, nothing happens:
user#host:~/jd-gui-0.3.5.linux.i686$ ./jd-gui
user#host:~/jd-gui-0.3.5.linux.i686$
How do I launch it?
For Ubuntu 13.10 64 bit, you should use
sudo apt-get install libgtk2.0-0:i386
sudo apt-get install libcanberra-gtk-module:i386
sudo apt-get install gtk2-engines-murrine:i386
You should install package ia32-libs.
For Ubuntu 14.04, you can use :
sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 libgtk2.0-0:i386 libxxf86vm1:i386 libsm-dev:i386 libcanberra-gtk3-module:i386
I am using Ubuntu 14.04 LTS, all the methods above (apt-get install blabla) don't work.
this worked for me:
$ git clone git#github.com:java-decompiler/jd-gui.git
$ gradle build
then a file will be generated to : build/libs/jd-gui-1.0.0.jar
run it:
$ java -jar build/libs/jd-gui-1.0.0.jar
There is another option to use jd-gui on Ubuntu 64 bit. Download jd-gui for Windows and use Wine to open it. It works fine and without any hassles.
I installed Ubuntu 11.10, installed GNOME 3 (replaced Unity), installed Eclipse from the Ubuntu Software Center, installed the android sdk and ADT.
Now when I start eclipse I get a message saying:
Failed to get ADB version : Cannot run program
/home/ayush/android-sdk/platform-tools/adb":java.io.IOException:error=2,
No such file or directory
What is causing this error and how do I fix it?
The command to install IA32 libraries on Ubuntu is:
apt-get install ia32-libs
sudo dpkg --add-architecture i386
sudo apt-get update
apt-get install ia32-libs
Before that please check your ubuntu version. if you are running with 64 bits, you need to install a linux emulator, IA32 bit I thinks. Verify on Google.
after that, your ADB can run easily on ubuntu.
I'm using Fedora 17 and I got the same error as the poster:
[2013-08-29 21:44:08 - adb] Unexpected exception 'Cannot run program
"/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb":
error=2, No such file or directory' while attempting to get adb version from
'/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb'
I know this works if you are using Fedora 17/18 (login as root)
yum install redhat-lsb.i686
And then restart the IDE and the errors no longer show.
I had the exact same error as you had, but on my Ubuntu 12.04 LTS version.
The following avoided that error for me:
1) Install 'adb' and 'fastboot' provided by the following third-party PPA.
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
2) Replace the copy of 'adb' and 'fastboot' provided by the official Android SDK with those installed from the above step:
cp /usr/bin/adb <path-to-your-adt-sdk-package>/sdk/platform-tools/adb
cp /usr/bin/fastboot <path-to-your-adt-sdk-package>/sdk/platform-tools/fastboot
3) Restart(re-execute) your eclipse binary.
Full credits:
http://www.webupd8.org/2012/08/install-adb-and-fastboot-android-tools.html
They have the binaries for 12.10, 11.10 and 11.04 as well.
Don't try to install ia32-libs, this library has been obsoleted.
So, you should install these libraries:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Cheers