I’m working on a project that uses BLE (Bluetooth Low Energy) protocols for transferring data and am currently limited to my MacBook due to some Admin permission constraints on my work machine (running Windows).
I need to find a USB adapter that supports Bluetooth 4.0 Tx/Rx, however I am ONLY finding these dongles that solely support Windows distros. So my question:
1) Why is this? Is Bluetooth SIG or at least BLE somehow a propriety protocol patented or somehow bound to Microsoft? I mean, there exist iOS libraries for high-level BLE management, so...
2) Am I just missing the product I’m looking for and there are such accessories compatible with a Unix based OS?
Who said USB dongles only support Windows? On the contrary, I haven't heard about a single USB dongle that doesn't support Linux. Bluetooth SIG has defined and specified HCI over USB and every device uses that protocol (however some device specific code is often needed to initialize the device). See a list of some tested devices at https://github.com/50ButtonsEach/fliclib-linux-hci/blob/master/README.md#bluetooth-controllers. Those should work with Mac OS X as well, but if the computer already has a built in Bluetooth chip you might need to adjust the currently used device.
I'm hoping to use the newly released WebUSB API to communicate with a device i developed. This devices uses a FT230X USB to serial chip. The drivers of this chip are installed on most devices and communicating with it using minicom works smoothly. Now i want to try communicate with it through the browser. I started by downloading this example for arduino: webusb arduino. I set the filter to { 'vendorId': 0x0403, 'productId': 0x6015 } which shows the device. I'm able to find the device but when i try to connect i get the error: NotFoundError: Device unavailable.
Is there a way to find more specific errors? Should i set up a different interface or do i need to change some other configurations? I'm new to USB drivers so any help getting me on my way would be nice. I did read the (short) getting started documentation here. I use Ubuntu 16.04
The FT230X USB to serial chip does not provide an USB interface that Chrome can take control of. This is because, as you mention, the drivers for this chip are available with your operating system. With the serial driver attached Chrome cannot make the device available to your page through the WebUSB API.
The Arduino example programs the Atmel 32u4 chip on many Arduino and Arduino-compatible boards to add an additional USB interface which is not claimed by any system driver and is therefore available to Chrome.
Some developers have also had success either changing the vendor and product ID of their device so that the OS drivers do not claim it or by manually unbinding the driver.
I have a USB audio device (Scarlett Focusrite 18i6) which does not require a driver, so I assume it uses the USB HID Audio Class standard.
It works on everything from Windows and Mac to Linux and iOS.
But on Mac and Windows, it has a control application which can for instance enable and disable direct monitoring.
How would I go about reverse-engineering how this is done, so that I can reproduce it on platforms where the control application does not exist?
I'm thinking of booting up Windows in a VMWare session and then logging the USB communication (somehow?) while using the control application, but it does sound tedious considering the amount of data and my very limited understanding of USB.
Any other suggestions?
You could try running the control application using Wine instead of reverse engineering it. However, if it's accessing USB devices then there is a good chance it might be using an API not supported by Wine.
To reverse engineer it, you should find a way to look at the USB traffic between the computer and the device. Total Phase has some hardware USB protocol analyzers, but you might be able to find a good software solution for free.
Can a WindowsCE device connect so more than one BlueTooth device? The device needs to both serve as a BlueTooth hands-free speaker for a phone and connect to a third device via a serial BlueTooth connection.
Can an application do this without the need of a speciel driver?
You must understand that Windows CE is a modular OS and any specific platform capabilities are implemented by an OEM. An OEM can create a Windows CE device with absolutely no Bluetooth support or they might choose to implement just a Bluetooth client profile (say as a bluetooth audio device) or they may choose to implement a Bluetooth server so they can consume a Bluetooth serial device. They may also choose to implement both. Beyond what the OEM does in software, the hardware itself might allow only one or the other (or both or neither for that matter).
The short of this is that we can't actually answer your question becasue there is no generic answer that fits all devices. You have to ask the Device OEM what they support and if they can extend that support if they don't support what you need.
Is there a way to use one computer to send keystrokes to another by usb ?
What i'm looking to do is to capture the usb signal used by a keyboard (with USBTrace for example) and use it with PC-1 to send it to PC-2.
So that PC-2 reconize it as a regular keyboard input.
Some leads to do this would be very appreciated.
What you essentially need is a USB port on PC-1 that will act as a USB device for PC-2.
That is not possible for the vast majority of PC systems because USB is an asymmetric bus, with a host/device (or master/slave, if you wish) architecture. USB controllers (and their ports) on most PCs can only work in host mode and cannot simulate a device.
That is the reason that you cannot network computers through USB without a special cable with specialised electronics.
The only exception is if you somehow have a PC that supports the USB On-The-Go standard that allows for a USB port to act in both host and device mode. USB-OTG devices do exist, but they are usually embedded devices (smartphones etc). I don't know if there is a way to add a USB-OTG port to a commodity PC.
EDIT:
If you do not need a keyboard before the OS on PC-2 boots, you might be able to use a pair of USB Bluetooth dongles - one on each PC. You'd have to use specialised software on PC-1, but it is definitely possible - I've already seen a possible implementation on Linux, and I am reasonably certain that there must be one for Windows. You will also need Bluetooth HID drivers on PC-2, if they are not already installed.
On a different note, have you considered a purely software/network solution such as TightVNC?
There is a solution:
https://github.com/Flowm/etherkey
This uses a network connection from your computer to the raspi which is connected to a teensy (usb developer board) to send the key strokes.
This solution is not an out-of-the-box product. The required skill is similar to programming some other devices like arduino. But it's a complete and working setup.
The cheapest options are commercial microcontrollers (eg arduino platform, pic, etc) or ready built usb keyboard controllers (eg i-pac, arcade controllers,etc)
SEARCH THIS PROGRAM:
TWedge: Keyboard Wedge Software (RS232, Serial, TCP, Bluetooth)
then, MAKE YOUR OWN CONNECTION CABLE WITH:
(usb <-> rs232) + (NULL MODEM) + (rs232 <-> usb)
Connect 2 computer, write your own program to send signal to your (usb <-> rs232) unit, then you can control another computer under the help of TWedge.
The above mentionned https://github.com/Flowm/etherkey is one way. The keyboard is emulated from an rPi, but the principle can be used from PC to PC (or Mac to Whatever). The core answer to your question is to use an OTG-capable chip, and then you control this chip via a USB-serial adapter.
https://euer.krebsco.de/a-software-kvm-switch.html
uses a very similar method, using an Arduino instead of the Teensy.
The generic answer is: you need an OTG capable, or slave capable device: Arduino, Teensy, Pi 0 (either from Rapberry or Orange brands, both work; only the ZERO models are OTG capable), or, an rPi-A with heavy customisation (since it does not include USB hub, it can theoretically be converted into a slave; never found any public tutorial to do it), or any smartphone (Samsung, Nokia, HTC, Oukitel ... most smartphones are OTG capable). If you go for a Pi or a phone, then, you want to dig around USB Gadget. Cheaper solutions (Arduino/Teensy) need custom firmware.