Im able to use the following command - as shown in the documentation - to convert textures individually
texconv -pow2 -f BC1_UNORM cat.jpg
However I'd like to convert a whole folder full of textures. Following this advice I've tried using a wild card and the file directory:
texconv.exe -pow2 -f BC1_UNORM somepath\*.jpg
but the command prompt says
reading somepath\*.jpg "FAILED" <8007007b>
Given that I have never used texconv, this may not be the most efficient way of doing things, but it should work.
#!/bin/bash
# Set IFS to newline
SAVEIFS=$IFS
IFS='
'
for i in $(echo *.jpg); do
texconv -pow2 -f BC1_UNORM $i
done
# Restore IFS
IFS=$SAVEIFS
The SAVEIFS and IFS variables are related to bash's internal field separator.
In the code above, I'm replacing the default IFS to contain only \n(newline)
The loop goes through each file matching the pattern *.jpg and feeds that as input to texconv
Related
I'm trying to display the output of an AWS lambda that is being captured in a temporary text file, and I want to remove that file as I display its contents. Right now I'm doing:
... && cat output.json && rm output.json
Is there a clever way to combine those last two commands into one command? My goal is to make the full combined command string as short as possible.
For cases where
it is possible to control the name of the temporary text file.
If file is not used by other code
Possible to pass "/dev/stdout" as the.name of the output
Regarding portability: see stack exchange how portable ... /dev/stdout
POSIX 7 says they are extensions.
Base Definitions,
Section 2.1.1 Requirements:
The system may provide non-standard extensions. These are features not required by POSIX.1-2008 and may include, but are not limited to:
[...]
• Additional character special files with special properties (for example, /dev/stdin, /dev/stdout, and /dev/stderr)
Using the mandatory supported /dev/tty will force output into “current” terminal, making it impossible to pipe the output of the whole command into different program (or log file), or to use the program when there is no connected terminals (cron job, or other automation tools)
No, you cannot easily remove the lines of a file while displaying them. It would be highly inefficient as it would require removing characters from the beginning of a file each time you read a line. Current filesystems are pretty good at truncating lines at the end of a file, but not at the beginning.
A simple but extremely slow method would look like this:
while [ -s output.json ]
do
head -1 output.json
sed -i 1d output.json
done
While this algorithm is plain and simple, you should know that each time you remove the first line with sed -i 1d it will copy the whole content of the file but the first line into a temporary file, resulting in approximately 0.5*n² lines written in total (where n is the number of lines in your file).
In theory you could avoid this by do something like that:
while [ -s output.json ]
do
line=$(head -1 output.json)
printf -- '%s\n' "$line"
fallocate -c -o 0 -l $((${#len}+1)) output.json
done
But this does not account for variable newline characters (namely DOS-formatted newlines) and fallocate does not always work on xfs, among other issues.
Since you are trying to consume a file alongside its creation without leaving a trace of its existence on disk, you are essentially asking for a pipe functionality. In my opinion you should look into how your output.json file is produced and hopefully you can pipe it to a script of your own.
We have a tool for cutting adaptors https://github.com/vsbuffalo/scythe/blob/master/README.md and we wanted it to be used on all the files in the raw folder and make an output of each file separately as OUT+File Name.
Something is wrong with this script I wrote, because it doesn't take each file separately, and the whole thing doesn't work properly. It's gonna generateing empty file named OUT+files
Expected operation will looks:
take file1, use scythe on it, write output as OUTfile1
take file2 etc.
#!/bin/bash
FILES=/home/dave/raw/*
for f in $FILES
do
echo "Processing the $f file..."
/home/deve/scythe/scythe -a /home/dev/scythe/illumina_adapters.fa -o "OUT"+$f $f
done
Additionally, I noticed (testing for a single file) that the script uses only one core out of 130 available. Is there any way to improve it?
There is no string concatenation operator in shell. Use juxtaposition instead; it's "OUT$f", not "OUT"+$f.
This question already has answers here:
Read user input inside a loop
(6 answers)
Closed 5 years ago.
First post here! I really need help on this one, I looked the issue on google, but can't manage to find an useful answer for me. So here's the problem.
I'm having fun coding some like of a framework in bash. Everyone can create their own module and add it to the framework. BUT. To know what arguments the script require, I created an "args.conf" file that must be in every module, that kinda looks like this:
LHOST;true;The IP the remote payload will connect to.
LPORT;true;The port the remote payload will connect to.
The first column is the argument name, the second defines if it's required or not, the third is the description. Anyway, long story short, the framework is supposed to read the args.conf file line by line to ask the user a value for every argument. Here's the piece of code:
info "Reading module $name argument list..."
while read line; do
echo $line > line.tmp
arg=`cut -d ";" -f 1 line.tmp`
requ=`cut -d ";" -f 2 line.tmp`
if [ $requ = "true" ]; then
echo "[This argument is required]"
else
echo "[This argument isn't required, leave a blank space if you don't wan't to use it]"
fi
read -p " $arg=" answer
echo $answer >> arglist.tmp
done < modules/$name/args.conf
tr '\n' ' ' < arglist.tmp > argline.tmp
argline=`cat argline.tmp`
info "Launching module $name..."
cd modules/$name
$interpreter $file $argline
cd ../..
rm arglist.tmp
rm argline.tmp
rm line.tmp
succes "Module $name execution completed."
As you can see, it's supposed to ask the user a value for every argument... But:
1) The read command seems to not be executing. It just skips it, and the argument has no value
2) Despite the fact that the args.conf file contains 3 lines, the loops seems to be executing just a single time. All I see on the screen is "[This argument is required]" just one time, and the module justs launch (and crashes because it has not the required arguments...).
Really don't know what to do, here... I hope someone here have an answer ^^'.
Thanks in advance!
(and sorry for eventual mistakes, I'm french)
Alpha.
As #that other guy pointed out in a comment, the problem is that all of the read commands in the loop are reading from the args.conf file, not the user. The way I'd handle this is by redirecting the conf file over a different file descriptor than stdin (fd #0); I like to use fd #3 for this:
while read -u3 line; do
...
done 3< modules/$name/args.conf
(Note: if your shell's read command doesn't understand the -u option, use read line <&3 instead.)
There are a number of other things in this script I'd recommend against:
Variable references without double-quotes around them, e.g. echo $line instead of echo "$line", and < modules/$name/args.conf instead of < "modules/$name/args.conf". Unquoted variable references get split into words (if they contain whitespace) and any wildcards that happen to match filenames will get replaced by a list of matching files. This can cause really weird and intermittent bugs. Unfortunately, your use of $argline depends on word splitting to separate multiple arguments; if you're using bash (not a generic POSIX shell) you can use arrays instead; I'll get to that.
You're using relative file paths everywhere, and cding in the script. This tends to be fragile and confusing, since file paths are different at different places in the script, and any relative paths passed in by the user will become invalid the first time the script cds somewhere else. Worse, you aren't checking for errors when you cd, so if any cd fails for any reason, then entire rest of the script will run in the wrong place and fail bizarrely. You'd be far better off figuring out where your system's root directory is (as an absolute path), then referencing everything from it (e.g. < "$module_root/modules/$name/args.conf").
Actually, you're not checking for errors anywhere. It's generally a good idea, when writing any sort of program, to try to think of what can go wrong and how your program should respond (and also to expect that things you didn't think of will also go wrong). Some people like to use set -e to make their scripts exit if any simple command fails, but this doesn't always do what you'd expect. I prefer to explicitly test the exit status of the commands in my script, with something like:
command1 || {
echo 'command1 failed!' >&2
exit 1
}
if command2; then
echo 'command2 succeeded!' >&2
else
echo 'command2 failed!' >&2
exit 1
fi
You're creating temp files in the current directory, which risks random conflicts (with other runs of the script at the same time, any files that happen to have names you're using, etc). It's better to create a temp directory at the beginning, then store everything in it (again, by absolute path):
module_tmp="$(mktemp -dt module-system)" || {
echo "Error creating temp directory" >&2
exit 1
}
...
echo "$answer" >> "$module_tmp/arglist.tmp"
(BTW, note that I'm using $() instead of backticks. They're easier to read, and don't have some subtle syntactic oddities that backticks have. I recommend switching.)
Speaking of which, you're overusing temp files; a lot of what you're doing with can be done just fine with shell variables and built-in shell features. For example, rather than reading line from the config file, then storing them in a temp file and using cut to split them into fields, you can simply echo to cut:
arg="$(echo "$line" | cut -d ";" -f 1)"
...or better yet, use read's built-in ability to split fields based on whatever IFS is set to:
while IFS=";" read -u3 arg requ description; do
(Note that since the assignment to IFS is a prefix to the read command, it only affects that one command; changing IFS globally can have weird effects, and should be avoided whenever possible.)
Similarly, storing the argument list in a file, converting newlines to spaces into another file, then reading that file... you can skip any or all of these steps. If you're using bash, store the arg list in an array:
arglist=()
while ...
arglist+=("$answer") # or ("#arg=$answer")? Not sure of your syntax.
done ...
"$module_root/modules/$name/$interpreter" "$file" "${arglist[#]}"
(That messy syntax, with the double-quotes, curly braces, square brackets, and at-sign, is the generally correct way to expand an array in bash).
If you can't count on bash extensions like arrays, you can at least do it the old messy way with a plain variable:
arglist=""
while ...
arglist="$arglist $answer" # or "$arglist $arg=$answer"? Not sure of your syntax.
done ...
"$module_root/modules/$name/$interpreter" "$file" $arglist
... but this runs the risk of arguments being word-split and/or expanded to lists of files.
Scenario: I have a script but no idea where I am in the directory tree, I need to resolve back to the nearest known location UPROC[something]
What I have so far:
I have a script running in a directory for example:
/home/jim/query/UPROCL/test/bob/dircut.sh
now the only constant in this is that the Directory I want will begin with UPROC... maybe not UPROCL but definitely UPROC
So I have written the following:
#!/bin/bash
#Absolute path for this script
SCRIPT=$(readlink -f "$0")
echo $SCRIPT
#Gets Path of script without script name
SCRIPTPATH=$(dirname "$SCRIPT")
echo $SCRIPTPATH
#Cuts everything after UPROC(.* is wildcard)/
CUTDOWN=$(sed 's/\(UPROC.*\/\).*/\1/' <<< $SCRIPTPATH)
echo $CUTDOWN
The only problem is that it output is:
/home/jim/query/UPROCL/test/bob/dircut.sh
/home/jim/query/UPROCL/test/bob
/home/jim/query/UPROCL/test/
Can some tell me what is wrong with my sed command as it is not cutting down to
/home/jim/query/UPROCL/
Because * is greedy. You want to be more selective about what characters are allowed following "UPROC" -- any non-slash
Not
sed 's/\(UPROC.*\/\).*/\1/'
but
sed -r 's,(UPROC[^/]*/).*,\1,'
Using different delimiters for the s/// command reduces the "leaning toothpick" problem.
Because the .* in the () is matching to the / at the end of test/.
You need [^/]* instead of . to not match any slashes.
When you want to know in which directory you are, why don't use pwd?
One thing which might be useful: the command pwd shows the value of the environment variable PWD (uppercase). In case you want to use the current directory as a value, you might use this.
I have separated some tracks from mp3 mixes using mp3splt.
BASH: (mp3splt -c('**!!***use .cue file***!!**') [cuefile.cue] [nonstopmix.mp3] ~for anyone interested, is in the Ubu repos~)
And I ended up with these filenames: "Antares" - 01 - "Xibalba".mp3 which is not a format I prefer, now I've made it a little project to change them with a shell script but its more difficult than I anticipated.
I want to change the filename from:
"Antares" - 01 - "Xibalba".mp
to:
01-Antares_-_Xibalba.mp3
so far I've used :
for var in *.mp3; do mv $var {var/"/}; done
and I could repeat that until I'm through, delete the 0x number and add one but I'd like to do it more efficient.
Could anyone give me a pointer (!not a script!) ?
I'd still like to write it myself but there's so much options that I'm a bit lost.
so far I thought to use this program flow:
read all the filenames containing .mp3 and declare as variable $var
strip $var from quotes
select 0x number, append delimiter _ (0x_)
move 0x_ to the beginning of the string
select remaining ' - - ' and change to '-'
done
which bash programs to use? especially changing the 0x puzzles me cuz I need a loop which increments this number and test if it is present in the filename variable and then it has to be changed.
It is easy to do in python 2.x. You can use this logic in any language you want.
import string
a=raw_input('Enter the name of song')
a=a.replace('"', "")
a=a.replace('.mp', ' .mp3')
words = a.split()
print words[2]+'-'+words[0]+'_-_'+words[4]+words[5]
Logic:
I removed ", then make .mp to .mp3, then splitted the string, which created a list ( array ) and then printed the elements according to need.
Try doing this :
rename -n 's/"(\w+)"\s+-\s*(\d+)\s*-\s*"(\w+)"\.mp/$2-$1_-_$3.mp3/' *mp
from the shell prompt. It's very useful, you can put some perl tricks like I does in a substitution.
You can remove the -n (dry-run mode switch) when your tests become valids.
There are other tools with the same name which may or may not be able to do this, so be careful.
If you run the following command (linux)
$ file $(readlink -f $(type -p rename))
and you have a result like
.../rename: Perl script, ASCII text executable
then this seems to be the right tool =)
If not, to make it the default (usually already the case) on Debian and derivative like Ubuntu :
$ sudo update-alternatives --set rename /path/to/rename
Last but not least, this tool was originally written by Larry Wall, the Perl's dad.