I am trying to install node_xslt module in node 0.12 but it is failing. I have python version 2.7 and node-gyp version 2.0.2.
Here is the error stack-
> node_xslt#0.1.9 preinstall /home/ritesh/Ritesh/projects/applane1/node_modules/node_xslt
> node-gyp rebuild
/bin/sh: 1: xml2-config: not found
gyp: Call to 'xml2-config --cflags' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:343:16)
gyp ERR! stack at ChildProcess.emit (events.js:110:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1074:12)
gyp ERR! System Linux 3.13.0-32-generic
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/ritesh/Ritesh/projects/applane1/node_modules/node_xslt
gyp ERR! node -v v0.12.4
gyp ERR! node-gyp -v v1.0.3
gyp ERR! not ok
npm ERR! Linux 3.13.0-32-generic
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "node_xslt"
npm ERR! node v0.12.4
npm ERR! npm v2.10.1
npm ERR! code ELIFECYCLE
npm ERR! node_xslt#0.1.9 preinstall: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the node_xslt#0.1.9 preinstall script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the node_xslt package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls node_xslt
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /node_modules/npm-debug.log
This error comes while installing other modules as well i.e. xslt4node.
Just had the same problem, though the question is 5+ years old, might be useful for somebody else. I solved my problem switching to a different version of node with nvm: nvm use 12 in my case.
Try installing compile tools
sudo apt-get install python3 g++ make python3-pip
Works for me
Try installing sudo apt-get install libxml2-dev
Related
I'm trying to set server with node.js and mariaDB on Ubuntu at EC2 of AWS.
here is the versions what I installed..
Ubuntu 14.04.3 LTS
MariaDB 10.1.14
NodeJS 4.4.7
now I want to connect with node.js and mariaDB, so I tried to install mariasql
with this command..
$sudo npm install mariasql
but this errors occurred..
========================================================================
gyp ERR! build error
gyp ERR! stack Error: not found: make
gyp ERR! stack at getNotFoundError (/usr/lib/node_modules/npm/node_modules/which/which.js:14:12)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:69:19)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:81:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:90:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5 gyp ERR! stack at FSReqWrap.oncomplete (fs.js:82:15)
gyp ERR! System Linux 3.13.0-74-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/ubuntu/node_modules/mariasql
gyp ERR! node -v v4.4.7
gyp ERR! node-gyp -v v3.3.1
gyp ERR! not ok
npm ERR! Linux 3.13.0-74-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "mariasql"
npm ERR! node v4.4.7
npm ERR! npm v2.15.8
npm ERR! code ELIFECYCLE
npm ERR! mariasql#0.2.6 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the mariasql#0.2.6 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the mariasql package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with: npm ERR! npm bugs mariasql
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!
npm ERR! npm owner ls mariasql
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/ubuntu/npm-debug.log
========================================================================
already installed node-gyp.
I tried old version of node, it was 0.10.x but it didn't work as well.
what did I wrong with it?
Do you have build-essential installed?
sudo apt-get install build-essential
Also, did you install node-gyp as global?
sudo npm install -g node-gyp
This is important, please see there is -g flag
I'm trying to reprogram a dash button to send an SMS to a phone. The task I am trying to attempt is located here: https://github.com/sanzgiri/dash-sms. Below is a copy of the error message I've been getting. Any insight is much appreciated. I'm using Ubuntu version 16 in a virtual machine.
rebecca#rebecca-VirtualBox:~$ sudo npm install node-dash-button
> socketwatcher#0.3.0 install /home/rebecca/node_modules/socketwatcher
> node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node- gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Linux 4.4.0-21-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/rebecca/node_modules/socketwatcher
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Linux 4.4.0-21-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "node-dash-button"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! socketwatcher#0.3.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the socketwatcher#0.3.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the socketwatcher package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs socketwatcher
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls socketwatcher
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/rebecca/npm-debug.log
I believe the code is confugure to work with "node" instead of "nodejs".
You can setup a simlink or just run this command. It solved the issue for me.
sudo apt install nodejs-legacy
Had the same issue and nothing would work. Finally had to go to node 0.10.26 on the pi.
Used NVM instead of direct node install.
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.1/install.sh | bash
nvm install 0.10.26
When I try to install ember-cli via npm, following the official documentation, I get this error:
9 errors generated.
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Error 1
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit(/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:270:23)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Darwin 14.5.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/lib/node_modules/ember-cli/node_modules/bufferutil
gyp ERR! node -v v4.0.0
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Darwin 14.5.0
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "-g" "ember-cli"
npm ERR! node v4.0.0
npm ERR! npm v3.3.5
npm ERR! code ELIFECYCLE
npm ERR! bufferutil#1.1.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the bufferutil#1.1.0 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the bufferutil package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls bufferutil
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /Users/sandropalmieri/npm-debug.log
I 've tried several times running the command using sudo but still getting this kind of error. Any idea of what's going on? Can you please assist? Thanks
Try adding --no-optional to your npm install command.
Are you using npm 3.3.3? See issue here: https://github.com/ember-cli/ember-cli/issues/4873
install node
node -v
v12.14.1
which npm
/usr/local/bin/npm
npm -v
6.13.4
npm install --save core-js#^3
sudo npm install -g ember-cli
which ember
/usr/local/bin/ember
ember -v
ember-cli: 3.16.0
node: 12.16.1
os: darwin x64
I am trying to install node-canvas on CentOs 6 with LAMP. I have already installed and updated Node JS to the latest, as well as nmp.
When i run the command: npm install canvas i just get the following errors:
[root#localhost tmp]# sudo npm install canvas
> canvas#1.2.1 install /tmp/node_modules/canvas
> node-gyp rebuild
Package pangocairo was not found in the pkg-config search path.
Perhaps you should add the directory containing `pangocairo.pc'
to the PKG_CONFIG_PATH environment variable
No package 'pangocairo' found
gyp: Call to 'pkg-config pangocairo --libs' returned exit status 1. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:343:16)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:820:12)
gyp ERR! System Linux 2.6.32-504.8.1.el6.x86_64
gyp ERR! command "node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /tmp/node_modules/canvas
gyp ERR! node -v v0.10.36
gyp ERR! node-gyp -v v1.0.2
gyp ERR! not ok
npm ERR! Linux 2.6.32-504.8.1.el6.x86_64
npm ERR! argv "node" "/usr/bin/npm" "install" "canvas"
npm ERR! node v0.10.36
npm ERR! npm v2.7.1
npm ERR! code ELIFECYCLE
npm ERR! canvas#1.2.1 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the canvas#1.2.1 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the canvas package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls canvas
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /tmp/npm-debug.log
you need to install cairo and a few other libraries before you can install node canvas.
Just use the command below:
yum install -y cairo cairo-devel cairomm-devel libjpeg-turbo-devel pango pango-devel pangomm pangomm-devel
I am trying to install a printer module for node on a lubuntu system, but making the npm installation, I get this:
gyp: Call to 'cups-config --libs' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node-gyp/lib/configure.js:344:16)
gyp ERR! stack at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:797:12)
gyp ERR! System Linux 3.16.0-23-generic
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/puesto1/app/node_modules/printer
gyp ERR! node -v v0.10.25
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian
npm ERR! printer#0.1.1 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the printer#0.1.1 install script.
npm ERR! This is most likely a problem with the printer package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls printer
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 3.16.0-23-generic
npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! cwd /home/puesto1/app
npm ERR! node -v v0.10.25
npm ERR! npm -v 1.4.21
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/puesto1/app/npm-debug.log
npm ERR! not ok code 0
It is a recently installed lubuntu, and I donĀ“t know what to do. Any suggestion to solve the problem?? Any other module to print??
Thank you.
I think node-gyp is not up to date in your system and also cups-config is not installed, try to re-install node-gyp using apt-get with this command : sudo apt-get install node-gyp and install cups-config using command : sudo apt-get install libcups2-dev