Is there the possibility to emit ASM when compiling something using Cranelift? By "ASM" I mean the assembler text-representation, in e.g. Intel-Syntax or similar
Now I was planing on implementing this myself using a dissasembler-library like Capstone or Iced, but then I found Context::set_disasm(bool) which apparently does exactly what I need. The problem is I'm unable to find where to extract this assembler-code from. There's no function like get_disasm as far as I looked.
If it's relevant, I'm building both a JIT and an AOT compiler and I want the dissasembler to work when using either.
Can one help me out?
Retrieve the disasm field of CompiledCode. It is in CompiledCodeBase, so it is not documented, unfortunately.
I am getting this single error when I am linking my project,
COMMUNICATION.obj : fatal error LNK1179: invalid or corrupt file:
duplicate COMDAT '_IID_IXMLDOMImplementation'
What is the source of the problem?
This is a tricky one.
The issue is that the symbol(s)-generated is too-long, and an ambiguity exists:
//...
void MyVeryLongFunctionNameUnique_0(void);
void MyVeryLongFunctionNameUnique_1(void);
// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
// (example max-symbol-length-seen-by-linker)
In this case, the linker "sees" these two functions as the "same", because the part that makes them "unique" is longer-than-the-max-symbol length.
This can happen in at least three cases:
Your symbol names are "too-long" to be considered unique to the linker, but may have been fine for the compiler (such as when you expand-out from many nested templates)
You did some "trickery" that is invalid C++, and it passed the compiler, but you now have an invalid *.obj, and it chokes the linker.
You specified duplicate "unnamed" classes/structs, and the linker cannot resolve them.
===[UPDATE]===, It's not your fault, it's an internal problem with the compiler and/or linker (see below for possible work-arounds).
Depending on the issue (above), you can "increase" your symbol-length (by limiting-your-decrease-of-symbol-length), or fix your code to make it valid (unambiguous) C++.
This error is (minimally) described by Microsoft at:
http://msdn.microsoft.com/en-us/library/cddbs9aw(v=vs.90).aspx
NOTE: This max-symbol-length can be set with the /H option, see: http://msdn.microsoft.com/en-us/library/bc2y4ddf(v=vs.90).aspx
RECOMMEND: Check to see if /H is used on your command-line. If it is, delete it (do not specify max-symbol-length, it will default to 2,047, the /H can only DECREASE this length, not increase it).
However, you probably triggered it through the /Gy option (function-level-linking), which was probably implied through one of /Z7, /Zi, or /ZI: http://msdn.microsoft.com/en-us/library/958x11bc(v=vs.90).aspx
One MSDN thread that talks about this issue is:
http://social.msdn.microsoft.com/Forums/en-US/vcmfcatl/thread/57e3207e-9fab-4b83-b264-79a8a717a8a7
This thread suggests that it's possible to trigger this issue with "invalid-C++-code-that-compiles" (you get your *.obj), but that invalid-*.obj chokes the linker (this example attempts to use main as both a function and as a template):
http://www.cplusplus.com/forum/lounge/46361/
===[UPDATE]===
I should have said this before, because I suspected, but I now have more information: It might not be your fault, there seems to be an issue in the compiler and/or linker that triggers this error. This is despite the fact that the only common denominator in all your failed relationships is you.
Recall that the "above-list" applies (it MIGHT be your fault). However, in the case where, "it's not your fault", here's the current-running-list (I'm confident this list is NOT complete).
There is an internal error/corruption in your *.ilk file (intermediate-link-file). Delete it and rebuild.
You have /INCREMENTAL turned on for linking, but somehow that incremental-linking is not working for your project, so you should turn it off and rebuild (Project-Properties=>Configuration Properties=>Linker=>General=>Enable Incremental Linking [set to "No" (/INCREMENTAL:NO)]
There's a problem with "Optimization" for "COMDAT Folding" in your use. Your can "Remove Redundant COMDATs" by going to Project Proerties=>Configuration Properties=>Linker=>Optimization=>Enable COMDAT Folding, set to "Remove Redundant COMDATs (/OPT:ICF)
Here's an interesting thread from a guy who sometimes can link, and sometimes not, by commenting in/out a couple lines of code. It's not the code that is the problem -- he just cannot link consistently, and it looks like the compiler and/or linker has an internal problem under some obscure use case:
http://www.pcreview.co.uk/forums/fatal-error-lnk1179-t1430593.html
Other observations from a non-trivial web search:
this problem appears to be non-rare
it seems to be related to some form of template<> use
others seem to see this problem with "Release" build when it did not have this problem with "Debug" build (but it is also seen on the "Debug" build in many cases)
if the link "fails" on one machine, it may "succeed" on another build machine (not sure why, a "clean-build" appears to have no effect)
if you comment in/out a particularly significant couple-lines-of-code, and finish your build, and keep doing this until all the code is un-commented again, your link may succeed (this appears to be repeatable)
if you get this error with MSVC2008, and you port your code to MSVC2010, you will still get this error
===[PETITION TO THE GOOD PEOPLE OF THE WORLD]===
If you have other observations on this error, please list them below (as other answers, or as comments below this answer). I have a similar problem, and it's not my fault, and none of these work-arounds worked for me (although they did appear to work for others in their projects in some cases).
I'm adding a bounty because this is driving me nuts.
===[UPDATE+2]===
(sigh), Here's more things to try (which apparently work for others, but did not work for me):
this guy changed his compile settings, and it worked (from thread at http://forums.codeguru.com/showthread.php?249603.html):
Project->Settings->C++ tab, Debug cathegory: Inline function expansion: change from 'None' to 'Only _inline'.
the above thread references another thread where the had to re-install MSVC
it is possibly related to linking modules with "subtle-differences" in possibly-incompatible compiler and/or link switches. Check that all the "contributing libs" are built with the exact same switches
Here's some more symptoms/observations on this error/bug:
list(s) for above issues still apply
the issue seems to "start-showing-up" with MSVC2005, and continues with the same behavior for MSVC2008 and MSVC2010 (error still occurs after porting code to newer compilers)
restarting IDE, rebooting machine doesn't seem to work for anybody
one guy said an explicit "clean" followed by a recompile worked for him, but many others say it did not work for them
is often related to "incremental linking" (e.g., turn it off)
Status: No joy.
===[UPDATE+3 : LINK SUCCESS]===
Super-wacky-makes-no-sense fix to successfully link discovered!
This is a variation on (above), where you "fiddle-with-the-code-until-the-compiler-and/or-linker-behaves". NOT GOOD that one might need to do this.
Specific single linker-error (LNK1179) was for MyMainBody<>():
#include "MyClassA.hpp"
#include "MyClassB.hpp"
#include "MyClassC.hpp"
#include "MyClassD.hpp"
#include "MyMainBody.hpp"
int main(int argc, char* argv[])
{
// Use a function template for the "main-body",
// implementation is "mostly-simple", instantiates
// some local "MyClass" instances, they reference
// each other, and do some initialization,
// (~50 lines of code)
//
// !!! LNK1179 for `MyMainBody<>()`, mangled name is ~236 chars
//
return MyMainBody<MyClassA,MyClassB,MyClassC,MyClassD>(argc,argv);
}
THE FIX:
Convert MyMainBody<>() from a "template<>" to an explicit function, LINK SUCCESS.
THIS FIX SUX, as I need the EXACT-SAME-CODE for other types in other utilities, and the MyMainBody<>() implementation is non-trivial (but mostly simple) instantiations-and-setups that must be done in a specific way, in a specific order.
But hey, it's a temporary work-around for now: Confirmed on MSVC2008 and MSVC2010 compilers (same LNK1179 error for each, successful link on each after applying the work-around).
THIS IS A COMPILER AND/OR LINKER ERROR, as the code is "simple/proper-C++" (not even C++11).
So, I'm happy (that I got a link after suffering full-time for 2+weeks). But, disappointed (that the compiler and/or linker has a STUPID GLARING PROBLEM with linking a SIMPLE TEMPLATE<> in this use-case that I couldn't figure out how to address).
FURTHER, the "Bounty Ended", but nobody else wanted to take this on (no other answers?), so looks like "+100" goes to nobody. (heavy-sigh)
This question has a lot of answers but none of them quite capture what was happening in my codebase, and what I suspect the OP was seeing back in 2012 when this question was asked.
The Problem
The COMDAT error on an IID_* type is easy to accidentally reproduce by using the #import directive with both the rename_namespace and named_guids attributes.
If two #imported type libraries contain the same interface, as is likely the case for OP's IXMLDOMImplementation, then the generated .tlh files will declare IID_IXMLDOMImplementation in both namespaces, leading to the duplicate.
For example, the code generated for:
#import <foo.tlb> rename_namespace("FOO") named_guids;
#import <bar.tlb> rename_namespace("BAR") named_guids;
...could be simplified into something like this:
namespace FOO {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
namespace BAR {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
Here's a simple RexTester reproduction of the problem: https://rextester.com/OLAC10112
The named_guids attribute causes the IID_* to be generated and the rename_namespace attribute wraps it in the namespace.
Unfortunately, in this case, extern "C" does not seem to work as expected when it appears inside a C++ namespace. This causes the compiler to generate multiple definitions for IID_FOOBAR in the same .obj file.
DUMPBIN /SYMBOLS or a hex editor confirms the duplicate symbols.
The linker sees these multiple definitions and issues a duplicate COMDAT diagnostic.
A Solution
Knowing that rename_namespace doesn't play well with named_guids, the obvious solution is to simply not use them together. It's probably easiest to remove the named_guids attribute and instead use the _uuidof() operator.
After removing named_guids from #import directives and touching up the code, replacing all uses of FOO::IID_IFooBar with _uuidof(FOO::IFooBar), my COM-heavy codebase is back to building again.
This issue is reported as a bug in some specific versions of Visual Studio 2017. Try patching 15.9.1 or later to fix this issue
Reported Issue in VS 15.8 Preview 4
Resolved patchs in VS 15.9 Preview 2
I encountered this problem whilst porting some code (1) from MSVC to GCC. To get the build to link on GCC, I had to provide empty implementations for some specialised templated functions (2), and this resulted in LNK1179 on MSVC. I was able to resolve by inlining the functions (3), i.e.
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b);
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
template<> template<> inline void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
I had to do
c++ -> code generation -> enable function - level linking -> no
Hopefully my lame workaround will help someone: I make sure to manually delete ALL .obj AND intermediate build files (including at least .pch, .pdb, .tlog, .lastbuildstate and anything else just hanging out looking suspicious) and rebuild from scratch.
I suggest without evidence that having some files left over from a previous build tends to cause the problem to happen more frequently. In my specific build system, I delete and recreate the .vcxproj and .sln files from scratch as well.
My own personal suspicion is that some kind of race condition exists in the build/link process between the time that intermediate files are read and the time they are written in a large project. Again, I have no evidence this is true, but this is my only guess that seems to fit all the known facts of the bug.
I wrote Outlook addins years ago and I was asked to write another. Right off the bat, I ran into this problem and through a little process of elimination, I fixed mine.
It turns out that when you choose an extensibity project(I hand coded mine back in the day), it creates and save 2 objects that I was unaware of: DTE and DTE80. To create the interfaces that manipulate these objects, they import directly from the DLLs in stdafx.h. Being that I'm working on Outlook, I also needed to import a couple of interfaces: Office and Outlook.
So, seeing as this error popped up almost immediately after writing my first tidbits of code, I started over, and added one thing at a time. The project blew chunks in the described way right after I added:
//Added mvc
//The following #import imports MSO based on it's LIBID
#import "libid:2DF8D04C-5BFA-101B-BDE5-00AA0044DE52" version("2.2") lcid("0") rename_namespace("Office") raw_interfaces_only named_guids
using namespace Office;
//The following #import imports Outoloks Object lib based on it's LIBID
#import "libid:00062FFF-0000-0000-C000-000000000046" rename_namespace("Outlook") raw_interfaces_only named_guids
using namespace Outlook;
So, seeing as I had no intention of figuring out the DTE stuff, I just commented out them and anything having to do with them:
//The following #import imports VS Command Bars based on it's LIBID
// #import "libid:1CBA492E-7263-47BB-87FE-639000619B15" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE based on it's LIBID
// #import "libid:80cc9f66-e7d8-4ddd-85b6-d9e6cd0e93e2" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE80 based on it's LIBID
// #import "libid:1A31287A-4D7D-413e-8E32-3B374931BD89" version("8.0") lcid("0") raw_interfaces_only named_guids
After wandering around fixing the compile errors, it compiled and linked just fine. I'm not suggesting this will work for everybody, but it worked for me. Good luck to any who pass by here....
I got this error and was really confused about it. Ended commenting out everything in the referenced cpp and reintroduce things in small batches until the file was back in the same state as when I started. And I don't get the error anymore. To me this points to this in my case being a bug in the compiler but since I can't reproduce it anymore I can't get help further than that.
I'm on:
Microsoft Visual Studio Professional 2019
Version 16.11.3
I am facing a situation of which I have no idea. I am tried to test one method that I have implemented in C++ and I used swig to generate the wrapper. After compilation, when I tried to run the application, I got an error java.lang.UnsatisfiedLinkError.
It further states that
cannot load library:reloc_library[1311]:33
cannot locate '_Z13recognizeFacePKcS0_'
...
and suddenly throw exception.
I tried using adb shell to debug and found library in the right location (data/data/com/mesh/faceAuth/lib/libfaceAuth.so) but it gives the same error. I also read from this site, that it has to do with wrong STL implementation which I don't have any clue of. I will highly appreciate your candid suggestion.
Regards,
Mohammed.
Best guess with what information you have provided, The library you are trying to load needs some dependencies to be loaded before it.
For example:
System.loadLibrary("bullet");
System.loadLibrary("irrlicht");
System.loadLibrary("gamescript");
gamescript library needs other 2 library to be loaded before it. Otherwise, it gives me the same error you have mentioned. I can dig further on this issue if you can post some part of your .mk file for building the library here.
Your error has nothing to do with STL.
You probably reference a global function ::recognizeFace(char const*, char const*) in your code. Maybe, you have another function defined, for example recognizeFace(char*, char*).
I'm working on a cross platform project that uses STL. The other compiler includes STL support by default, but in VS2005 I need to add the following before the class definitions that use STL items:
#include <cstdlib>
using namespace std;
Is there a VS2005 option that would set this automatically? It's just a bit tedious to work around. I'm just trying to avoid lots of #ifdefs in the source -
EDIT: The other compiler is the IAR workbench for the ARM 926x family. Perhaps I should get them to explicitly do the includes?
Also - is "std::map<>" preferred over "using namespace std; map<>" ?
All compilers should require you to include those lines. If they don't, then they're just encouraging you to write non-portable code because you're relying on certain headers to be included automatically and you're relying on certain names to be in scope implicitly.
I don't mean to say that those two lines should always be required, though. I only mean that if the rest of your code is written to use things declared in the cstdlib header and in the std namespace, then those two lines need to appear first, and the compiler shouldn't act as though they are there when they really aren't.
Check whether your other compiler has some settings to disable this implicit code. If it doesn't, then it's probably a very, very old compiler, and you should consider not using it and not supporting it anymore.
Try refering to STL components by their namespace-qualified name (i.e. std::vector).
Doing a global 'using namespace std' is usually a bad idea.
Or maybe I'm not understanding the question.
The IAR compiler does not support the std namespace (I'm not sure why, because it does support namespaces in general if I remember right).
If you look in the runtime headers for IAR you'll see that they do some macro gymnastics to work around that (the runtime is licensed from Dinkumware, who provide runtimes for quite a few compilers).
You may need to do something similar if you want your stuff to work in multiple environments. A possible cleaner alternative is to just include the "using namespace std;" directive. I might be wrong, but I think the IAR compiler essentially ignored it (it didn't mind that you were using a namespace it didn't know about). A lot of people will think that's ugly, but sometimes you gotta do what the compiler you have wants you to do.
In general you should avoid "using namespace X", especially in header files (because everyone who includes your header gets that namespace too whether they want it or not), and especially for namespace std (because it's so big and the potential for name collisions is big).
Instead, in header files refer to names by their fully qualified form, e.g.:
// for plain functions
void foo(std::map<int> intMap);
// for classes
class person {
std::string name_;
public:
person(std::string name);
// ...
};
Then, in code files, you can do "using", but prefer using specific items in the namespace rather than pulling in the entire namespace. e.g.:
using std::map;
using std::string;
void foo(map<int> intMap) { ... };
person::person(string name) : name_(name) { ... };
etc. This way you avoid impacting others including your headers, and you avoid pulling in potentially zillions of names that might cause a collision with other stuff.