I have come across the following key combinations(...i assume) in vim pymode documentation. <C-c>, <C-C>, <C-X><C-O>, <C-P>/<C-N>. How are they to be interpreted?
<C-c> and <C-C> both mean Ctrl+C.
I'm sure you can infer how to type the others.
See :help key-notation.
Related
I have previously used the following vim mapping so that when I press esc, vim does not 'creep backwards':
:inoremap <silent> <Esc> <Esc>`^
However, this has quite unexpected side-effects (to me, at least), for example, now that I have an <Esc> on the lhs, the arrow keys won't work anymore in insert mode (and a few other items that send escape sequences to vim.
Is there a better way to do this, or perhaps a settings within vim that alters this behavior? Ultimately, I want the behavior or <Esc>`^, I just don't want to have an <esc> that is mapped on the lhs for other reasons. What would be the best approach here?
No need to remap <ESC>. You could try using this autocmd in your .vimrc:
au InsertLeave * call cursor(getcurpos()[1], getcurpos()[2]+1)
This code is a reimplementation of the approach described in the Vim wiki, which is more verbose (and possibly outdated). The command has a small latency though.
i am trying to figure out vim key bindings... what key does correspond to? or more generally how do I read vim key bindings? I looked at the VIM documentation but it was not very clear.
It's Ctrl+C. See :help key-notation.
You can use #romainl's answer:help key-notation to find the notation of each modifier keys.
And you can use below commands to see the current mappings in your vim:
:nmap Show key maps for normal mode
:vmap Show key maps for visual mode
:imap Show key maps for insert mode
:map Show all the key maps
I am a happy VIM user, although I admit I'm quite far from being fluent. I found this nice post:
Vim clear last search highlighting and I thought I'd become a better person if I didn't have to hammer away a random character sequence every time I did a search. Now, I'm also using the vimrc config from here:
http://amix.dk/vim/vimrc.html
and the problem I have is that when I add the line nnoremap <esc> :noh<return><esc> to it (it doesn't seem to make a difference where I put it) I get awkward behaviour when I use arrows in command mode, namely letters from A to D appear in a newline and I get switched to insert mode.
There has to be some mapping conflict but for the life of me I can't figure out where it is.
EDIT: As it follows from the answers it turns out the Ultimate vimrc part is not relevant, the mentioned nnoremap command will cause altered arrow behaviour even if it's the only vimrc entry. Changing title to a more informative one.
PS. I know I shouldn't use arrows, hopefully I'll get there one day.
The mapping
nnoremap <esc> :noh<return><esc>
will conflict with so called "grey keys" and I believe that it should be used either in GVim only or in terminal Vim by someone who does not use special keys like arrows.
From what I know (and guess) how Vim processes keys, I would say that it's impossible to do anything with this. For Vim to recognize special key all its components should go in a row, so when you press Arrow Left Vim gets the following sequence of codes:
<esc> [ D
But after your mapping Arrow Left becomes:
: n o h l <cr> <esc>
[ D
Vim sees two separate sequences and treats <esc> as a single press of Escape key, thus next two codes of Left Arrow key lose their special meaning.
So I suggest you to map :noh to some other key sequence (e.g. to one starting with <leader>, see :help mapleader; I don't recommend you to use F-keys, using them is as bad as using of arrow keys).
The cause had been explained well, but solution was not mentioned. However there is a straight one.
If you’ll tell to Vim explicitly that there are key sequences starting from <esc>[
:nnoremap <silent><esc> :noh<CR>
:nnoremap <esc>[ <esc>[
than when single <esc> will be pressed Vim will wait for a second (or different time, see :h 'timeoutlen') or for a next key (second <esc> for example) and only then replace it with :noh<CR>.
This solution preserves the ESC mapping to :nohlsearch.
The comment on this answer explaining why this is happening tells us that the root cause is the TermResponse behavior of vim. This can be compensated for by wrapping the mapping in an autocommand for the TermResponse event.
This ensures that the binding doesn't happen until after the term response is set, which prevents Esc from also sending a string like ]>1;3201;0c to vim.
Change your line in vimrc to this:
augroup no_highlight
autocmd TermResponse * nnoremap <esc> :noh<return><esc>
augroup END
The augroup commands are not strictly necessary, but they prevent multiple mappings when you reload your vimrc without quitting vim.
EDIT: If you also use a graphical vim like Gvim or Macvim, the TermResponse event will not fire. Assuming you use a single vimrc, you'll need some additional code like
if has('gui_running')
nnoremap <silent> <esc> :nohlsearch<return><esc>
else
" code from above
augroup no_highlight
autocmd TermResponse * nnoremap <esc> :noh<return><esc>
augroup END
end
Problem is that when you press an arrow terminal emits something like <Esc>OA. Vim part that supports terminal seems to use the same mapping mechanism to do the job as you are using: while nmap <Esc>OA will tell you nothing, call feedkeys("\eOA") will move one line up and call feedkeys("\eOA", 'n') will add letter A beyond current line. With your mapping being noremappable you forbid vim to use <Esc> as a part of the key. The problem is that you need remappable mapping here, but can have remappable mapping without it being recursive as well only if it starts with {lhs}, but <Esc>:noh<CR>OA is not going to work. I thought the following code will (it uses <expr> and function with side effect to make <Esc> be the first character of the actual {rhs} and still launch :noh), but in fact it does not:
function s:NoHlSearch()
nohlsearch
return "\e"
endfunction
nmap <expr> <Esc> <SID>NoHlSearch()
. I have no other idea how to solve the problem of having non-recursive remappable mapping which includes {lhs} but not at the start.
I have had good luck with this
if $TERM =~ 'xterm'
set noek
endif
nnoremap <silent> <esc> <esc>:noh<cr>
The disadvantage is that function keys can not be used in insert mode.
:h ek
For example backspace is <BS> and tab is <Tab>, but where can I look them up if I don't know or remember the sequence for, say, the up or down arrow?
Two :helpful tricks:
In insert mode and in the command line, hitting <C-v> followed by some key inserts that key's internal notation.
For example,
:helpCtrl+v↑
produces
:help <Up>
The :help command supports completion so you can type a keyword related to what you want and hit <Tab> or <C-d>:
:help key<Tab>
I was going to ask this, but then I found the answer by random luck in the help files. So here it is for those who are looking for the same:
:help keycodes
I am a happy VIM user, although I admit I'm quite far from being fluent. I found this nice post:
Vim clear last search highlighting and I thought I'd become a better person if I didn't have to hammer away a random character sequence every time I did a search. Now, I'm also using the vimrc config from here:
http://amix.dk/vim/vimrc.html
and the problem I have is that when I add the line nnoremap <esc> :noh<return><esc> to it (it doesn't seem to make a difference where I put it) I get awkward behaviour when I use arrows in command mode, namely letters from A to D appear in a newline and I get switched to insert mode.
There has to be some mapping conflict but for the life of me I can't figure out where it is.
EDIT: As it follows from the answers it turns out the Ultimate vimrc part is not relevant, the mentioned nnoremap command will cause altered arrow behaviour even if it's the only vimrc entry. Changing title to a more informative one.
PS. I know I shouldn't use arrows, hopefully I'll get there one day.
The mapping
nnoremap <esc> :noh<return><esc>
will conflict with so called "grey keys" and I believe that it should be used either in GVim only or in terminal Vim by someone who does not use special keys like arrows.
From what I know (and guess) how Vim processes keys, I would say that it's impossible to do anything with this. For Vim to recognize special key all its components should go in a row, so when you press Arrow Left Vim gets the following sequence of codes:
<esc> [ D
But after your mapping Arrow Left becomes:
: n o h l <cr> <esc>
[ D
Vim sees two separate sequences and treats <esc> as a single press of Escape key, thus next two codes of Left Arrow key lose their special meaning.
So I suggest you to map :noh to some other key sequence (e.g. to one starting with <leader>, see :help mapleader; I don't recommend you to use F-keys, using them is as bad as using of arrow keys).
The cause had been explained well, but solution was not mentioned. However there is a straight one.
If you’ll tell to Vim explicitly that there are key sequences starting from <esc>[
:nnoremap <silent><esc> :noh<CR>
:nnoremap <esc>[ <esc>[
than when single <esc> will be pressed Vim will wait for a second (or different time, see :h 'timeoutlen') or for a next key (second <esc> for example) and only then replace it with :noh<CR>.
This solution preserves the ESC mapping to :nohlsearch.
The comment on this answer explaining why this is happening tells us that the root cause is the TermResponse behavior of vim. This can be compensated for by wrapping the mapping in an autocommand for the TermResponse event.
This ensures that the binding doesn't happen until after the term response is set, which prevents Esc from also sending a string like ]>1;3201;0c to vim.
Change your line in vimrc to this:
augroup no_highlight
autocmd TermResponse * nnoremap <esc> :noh<return><esc>
augroup END
The augroup commands are not strictly necessary, but they prevent multiple mappings when you reload your vimrc without quitting vim.
EDIT: If you also use a graphical vim like Gvim or Macvim, the TermResponse event will not fire. Assuming you use a single vimrc, you'll need some additional code like
if has('gui_running')
nnoremap <silent> <esc> :nohlsearch<return><esc>
else
" code from above
augroup no_highlight
autocmd TermResponse * nnoremap <esc> :noh<return><esc>
augroup END
end
Problem is that when you press an arrow terminal emits something like <Esc>OA. Vim part that supports terminal seems to use the same mapping mechanism to do the job as you are using: while nmap <Esc>OA will tell you nothing, call feedkeys("\eOA") will move one line up and call feedkeys("\eOA", 'n') will add letter A beyond current line. With your mapping being noremappable you forbid vim to use <Esc> as a part of the key. The problem is that you need remappable mapping here, but can have remappable mapping without it being recursive as well only if it starts with {lhs}, but <Esc>:noh<CR>OA is not going to work. I thought the following code will (it uses <expr> and function with side effect to make <Esc> be the first character of the actual {rhs} and still launch :noh), but in fact it does not:
function s:NoHlSearch()
nohlsearch
return "\e"
endfunction
nmap <expr> <Esc> <SID>NoHlSearch()
. I have no other idea how to solve the problem of having non-recursive remappable mapping which includes {lhs} but not at the start.
I have had good luck with this
if $TERM =~ 'xterm'
set noek
endif
nnoremap <silent> <esc> <esc>:noh<cr>
The disadvantage is that function keys can not be used in insert mode.
:h ek