I am trying to write a formula that uses different vlookups depending on whether the formulas produce errors or not. I have 3 tabs, each with 3 columns.the first two columns contain values that are in the vlookup, with the third colum containing the value I want to find. Basically i want a formula that will use different vlookups depending on whether the lookup value is found in teh first tab or the second . Below is the formula i am working with. It works to bring in values from Sheet1 into Sheet3, but doesnt work when the values are in Sheet2. Also will be inserting this formula into vba code for automation use.
=IF(OR(ISERROR(VLOOKUP(B2,Sheet1!B2:C19,2,FALSE)),ISBLANK(VLOOKUP(Sheet3!B2,Sheet1!B1:C19,2,FALSE))),IF(OR(ISERROR(VLOOKUP(Sheet3!A2,Sheet1!A1:C19,3,FALSE)),ISBLANK(VLOOKUP(Sheet3!A2,Sheet1!A1:C19,3,FALSE))),IF(OR(ISERROR(VLOOKUP(Sheet3!B2,Sheet2!B1:C21,2,FALSE)),ISBLANK(VLOOKUP(Sheet3!B2,Sheet2!B1:C21,2,FALSE))),IF(OR((ISERROR(VLOOKUP(Sheet3!A2,Sheet2!A1:C21,3,FALSE))),ISBLANK(VLOOKUP(Sheet3!A2,Sheet2!A1:C21,3,FALSE))),"non",VLOOKUP(Sheet3!A2,Sheet2!A1:C21,3,FALSE)),VLOOKUP(Sheet3!B2,Sheet2!B1:C21,2,FALSE)),VLOOKUP(Sheet3!A2,Sheet1!A1:C19,3,FALSE)),VLOOKUP(Sheet3!B2,Sheet1!B1:C19,2,FALSE))
it returns the value sI am looking for up until the lookup values start occuring in Sheet2. At that point it shows me "non".
Any help would be greatly appreciated! Thanks
Your first VLOOKUP does not reference "Sheet3".
I think The below equation does what you are looking to do (assumes you are on Sheet3).
=IF(IFERROR(VLOOKUP($B$1,Sheet1!A:C,3,FALSE),"")="",IF(IFERROR(VLOOKUP($B$1,Sheet1!B:C,2,FALSE),"")="",IF(IFERROR(VLOOKUP($B$2,Sheet2!B:C,2,FALSE),"")="",IF(IFERROR(VLOOKUP($B$2,Sheet2!A:C,3,FALSE),"")="","nan",VLOOKUP($B$2,Sheet2!A:C,3,FALSE)),VLOOKUP($B$2,Sheet2!B:C,2,FALSE)),VLOOKUP($B$1,Sheet1!B:C,2,FALSE)),VLOOKUP($B$1,Sheet1!A:C,3,FALSE))
Related
I have a formula that sums one column based on a criteria from another column. This formula works fine:
=SUM(SUMIFS(sheet1!C:C,sheet1!A:A,{1, 7}))
However, i need to be able to use a cell reference which will contain the {1, 7}
So the formula will look like this:
=SUM(SUMIFS(sheet1!C:C,sheet1!A:A,M2))
But this returns a zero, when evaluting the formula it pulls the contents from the cell but wraps it in "" which i think is where the issue is happening.
I've tried adding formula to remove the quotes, and trying to pull the contents differently, but still the same.
Any help would be greatly appreciated.
Figured out a way round this.
I created a named range called condition, and assigned =Evaluate($M2).
Then I used this formula =SUMPRODUCT(SUMIFS(sheet1!C:C,sheet1!A:A,Condition))
This picks up all numbers used in M2, and works on all rows below with the Evaluate formula following.
Thank you to everyone that assisted with this.
This link helped aswell: Excel SUM of SUMIF/SUMIFS with dynamic multiple criteria
Good day.
In it's basic form, I need to count how many cells are empty.
Using the following below, I can count how many cells are empty.
=COUNTIF(Sheet1!C:C,"<>")
However, if the cells in column C contain formulas, it won't work.
After some googling, I found out that using SUMPRODUCT will get what I need
=SUMPRODUCT(--(LEN(Sheet1!C:C)>0))
Now, here's my problem.
I need to use that as a criteria inside a COUNTIFS function, but I don't know how to do that because it's referencing some ranges.
So just to make it simple, using COUNTIF or COUNTIFS function specifically, how can I pass a criteria that checks if cell (with formula) is empty.
This formula returns 0 but most likely I'm just not passing it properly as a criteria.
=COUNTIF(Sheet1!C:C,SUMPRODUCT(--(LEN(Sheet1!C:C)>0)))
Happy for other ways to count cells (with formulas) which are empty, but I need to use it as a criteria for a COUNTIF/COUNTIFS function.
Thank you very much.
If I understand what you're looking for, you were pretty close already.
Following the formula's you already found you can use them like:
=COUNTIF(Sheet1!C:C,"<>")-SUMPRODUCT(--(LEN(Sheet1!C:C)>0))
It will result in the count of cells that have a value/formula minus the count of cells that show a value (blank formula result is excluded).
The result is the count of cells that contain a formula with blank result.
I'm trying to count the number of distinct text from a specific date in a data table.
Data Sample with expect result :
I was able to figure out how to count the distinct element from a range I specify, because I can determine the first and last row containing the date.
=SUMPRODUCT(1/COUNTIF(B2:B15,B2:B15))
I have tried to modify my formula so that it determines the cell range by itself but without success.
I searched for an answer, using a combination of CELL and MAXIFS, example below, but Excel does not accept the formula.
=CELL("row",MAXIFS(A2:A15,A2:a15,D2))
I've looked at the INDEX formula, but I can't figure out how to do what I want to do. 😑
Any idea what I'm doing wrong, or what I should be doing instead?
Thanks, I appreciate it!
If you have Office 365 and the new Dynamic Arrays, this sort of formula has become ridiculously easy.
This formula in cell E3:
=COUNTA(UNIQUE(FILTER($B$2:$B$15,$A$2:$A$15=D3)))
Copy down.
You can also generate the unique list of dates with this formula in D3, which spills down automatically and does not need to be copied.
=UNIQUE(A2:A15)
It wasn't easy, but by separating each step of the problem, I was able to solve it.
Note that my solution only works because my dates are sorted.
Here's the final formula in the cell "One formula to rule them all":
=SUMPRODUCT(1/COUNTIF(INDIRECT(CONCATENATE(ADDRESS((MATCH(D3,$A$2:$A$15,0)+1),2),":",ADDRESS(MAX(($A$2:$A$15=D3)*ROW($A$2:$A$15)),2))),INDIRECT(CONCATENATE(ADDRESS((MATCH(D3,$A$2:$A$15,0)+1),2),":",ADDRESS(MAX(($A$2:$A$15=D3)*ROW($A$2:$A$15)),2)))))
Here are my explanations of my process:
Formula if I select the range :
=SUMPRODUCT(1/COUNTIF(B2:B15,B2:B15))
Formula to get the first iteration
=ADDRESS((MATCH(D3,$A$2:$A$15,0)+1),2)
Formula to get the last iteration
{=ADDRESS(MAX(($A$2:$A$15=D3)*ROW($A$2:$A$15)),2)}
Create range from two addresses
=INDIRECT(CONCATENATE(F3,":",G3))
Formula giving me the expect result
=SUMPRODUCT(1/COUNTIF(INDIRECT(CONCATENATE(F3,":",G3)),INDIRECT(CONCATENATE(F3,":",G3))))
I'm going around in circles with this and have tried as many different options as I can think of - VLOOKUP, INDEX/MATCH, IF etc... but I'm failing everytime.
I need to create a drop down list in sheet 3 (column A) that gets populated with values in column B of sheet 2, only where the value in column G of sheet 2 is "Yes". The values in sheet 2 look as follows:
This is what is shown at present:
I am using the following formula within Name Manager to get to this point:
=OFFSET(Units!$B$11,0,0,COUNTIF(Units!$B$11:$B$202,">"""),1)
and although this works, it's not quite as I need it to be. I've tried using Index/Match, small, VLOOKUP etc... but Excel reports that either I've too few arguments or can't reference a worksheet.
I've literally been though as many excel websites as I can find but no one seems to cover creating drop down lists where the drop down is dependent on a specific selection.
The values within sheet 2, column B are obtained from a hidden sheet and collected using the following query:
=IF(ISERROR(INDEX(All_Units!$D$2:$D$660542,MATCH(Units!A11,All_Units!$C$2:$C$660540,0))),"",INDEX(All_Units!$D$2:$D$660542,MATCH(Units!A11,All_Units!$C$2:$C$660540,0)))
I wondered whether I could take this query and use it to generate the drop down list, something along the lines of:
=INDEX(Units!$B$11:$B$202,MATCH(Units!$G$11:$G$202="Yes",Units!$G$11:$G$202,0)))
but this returns an error. The closest I got was using the OFFSET formula above but performing a COUNTIF, however; this unsurprisingly wouldn't tie Column B to the corresponding 'Yes' in column G.
Does anyone have any ideas as to how I can get this working?
You will need to create another sheet into which you will place an array formula. This formula will return all the desired output.
so create a sheet and name it something like DataVal
In A2 put the following array formula:
=IFERROR(INDEX(Units!$B$11:$B$202,MATCH(1,(Units!$G$11:$G$202="Yes")*(COUNTIF($A$1:A1,Units!$B$11:$B$202)=0),0)),"")
Being an array formula it needs to be confirmed with Ctrl-Shift-Enter. If done correctly then Excel will put {} around the formula.
Then copy/drag down far enough to ensure capturing every possible return.
Then use another INDEX/MATCH to create the named range (OFFSET() is volatile and should be avoided when possible). The formula would be something like:
=DataVal!$A$2:INDEX(DataVal!$A:$A,MATCH("ZZZ",DataVal$A:$A))
This will dynamically set the named range to the extent of the dynamic list created by the array formula above.
I am creating a work chart for a project with excel table. However with so many people to manage I have ran into an issue of often putting same person twice on different columns of the same row (he/she can't work on two places at same time!)
So, I am looking for help with a formula that notices if the same name appears twice on a row but does not count multiple blank cells as duplicates. My understanding of excel is very basic and so far I have managed to get this far
=COUNTIF(A6:W6;A6:W6)=1
which returns to me with false, which I assume is because of the blank, unfilled cells still within the table being counted as duplicates.
Help would be appreciated, thanks.
You can't have a range as the second argument of a Countif. The range you pass into the formula will resolve to just the first value. Use the Evaluate Formula tool to see what I mean.
If you want to determine if ANY name in the range A1:W1 appears more than once (and exclude blanks), you will need a recursive function. That can only be done with VBA, not with a formula.
You could use a Countif in a conditional format to highlight duplicate names in a row. That's a piece of cake. Pipe up if you want to do that.