I'm Using Microsoft Excel 2013.
I have a lot of data that I need to separate in Excel that is in a single cell. The "Text to Columns" feature works great except for one snag.
In a single cell, I have First Name, Last Name & Email address. The last name and email addresses do not have a space between them, but the color of the names are different than the email.
Example (all caps represent colored names RGB (1, 91, 167), lowercase is the email which is just standard black text):
JOHN DOEjohndoe#acmerockets.com
So I need to put a space after DOE so that it reads:
JOHN DOE johndoe#acmerockets.com
I have about 20k rows to go through so any tips would be appreciated. I just need to get a space or something in between that last name and email so I can use the "Text to Columns" feature and split those up.
Not a complete answer, but I would do it way:
Step 1 to get rid of the formatting:
Copy all text that you have to the notepad
Then copy-paste text from Notepad to excel as text
I think this should remove all the formatting issues
Step 2 is to use VBA to grab emails. I assume that you have all your emails as lowercase. Therefore something like this should do the trick (link link2):
([a-z0-9\-_+]*#([a-z0-9\-_+].)?[a-z0-9\-_+].[a-z0-9]{2,6})
Step 3 is to exclude emails that you extracted from Step2 from your main text. Something like this via simple Excel function:
=TRIM(SUBSTITUTE(FULLTEXT,EMAIL,""))
Since you removed all the formatting in Step1, you can apply it back when you done
You can knock this out pretty quickly taking advantage of a how Font returns the Color for a set of characters that do not have the same color: it returns Null! Knowing this, you can iterate through the characters 2 at a time and find the first spot where it throws Null. You now know that the color shift is there and can spit out the pieces using Mid.
Code makes use of this behavior and IsNull to iterate through a fixed Range. Define the Range however you want to get the cells. By default it spits them out in the neighboring two columns with Offset.
Sub FindChangeInColor()
Dim rng_cell As Range
Dim i As Integer
For Each rng_cell In Range("B2:B4")
For i = 1 To Len(rng_cell.Text) - 1
If IsNull(rng_cell.Characters(i, 2).Font.Color) Then
rng_cell.Offset(0, 1) = Mid(rng_cell, 1, i)
rng_cell.Offset(0, 2) = Mid(rng_cell, i + 1)
End If
Next
Next
End Sub
Picture of ranges and results
The nice thing about this approach is that the actual colors involved don't matter. You also don't have to manually search for a switch, although that would have been the next step.
Also your neighboring cells will be blank if no color change was found, so it's decently robust against bad inputs.
Edit adds ability to change original string if you want that instead:
Sub FindChangeInColorAndAddChar()
Dim rng_cell As Range
Dim i As Integer
For Each rng_cell In Range("B2:B4")
For i = 1 To Len(rng_cell.Text) - 1
If IsNull(rng_cell.Characters(i, 2).Font.Color) Then
rng_cell = Mid(rng_cell, 1, i) & "|" & Mid(rng_cell, i + 1)
End If
Next
Next
End Sub
Picture of results again use same input as above.
Related
In Excel, I have a text in a cell that has two different fonts. One of them is variable, be it arial or calibri, and the other is Symbol. I need to be able to detect the symbol font and what is within it.
I've tried to check for characters with values above 122, but these are just regular text values with a different font.
I tried using ThemeFont, such as
Dim WhatIsFont As ThemeFont
WhatIsFont = Worksheets("MySheet").Range("A1").Font.ThemeFont
But it returns Nothing when I this variable.
And if I use WhatIsFont as a String, it instead gives me a numeric value between 0 and 2 based on what kind of fonts and how many are used.
I cannot, for the life of me, find any other function that deals with ThemeFonts and know which ones exactly are being used.
Anyone knows how to do this?
Thank you.
After a while of playing around, I found an answer to my own question through the following code:
Sub TestFont()
'
' TestFont Macro
'
'
Dim i As Long
Dim r As Range
ThisWorkbook.Worksheets("Instructions").Range("C11").Select
For Each r In Selection
For i = 1 To Len(r.Value)
With r.Characters(i, 1).Font
MsgBox .Name
End With
Next i
Next r
End Sub
To answer my question then. ThemeFont won't cut it. Its .Font.Name that gives you the actual font being used here. By cycling through the several characters in a string - rather than investigate the string as a whole - you can pinpoint the Font name of each character, and thus from there single out the ones written in Symbol!
I have an excel sheet set up to automatically calculate meetings per day by day of the week. I would like to write a formula to return all dates I have a meeting scheduled (comma separated preferably), but I am having some difficulty. Using Vlookup, I can only get it to return the first date.
For example, here is what my data looks like:
A B C
Initial Meetings Follow-up Meetings Date
1 1 7/29/2015
0 1 7/30/2015
1 1 7/31/2015
0 0 8/1/2015
0 0 8/2/2015
I would like to write a formula to return "7/29/2015, 7/31/2015" in one cell, and "7/29/2015, 7/30/2015, 7/31/2015" in another, but I seem to be stuck.
You can't do this with vLookup.
This can be done relatively easily in a VB script, but it would affect portability as many if not most users disable macros by default and in many cases users are prevented from using Macros because their company disables them and makes it policy that users should not use them.
If you are OK with Macros, you can put the following into a new module and then use =MultiVlookup(lookup_value,table_array, col_index_num) in the same way as you'd use vlookup and it should give you a comma separated list of multiple matches:
Public Function MultiVlookup(find_value, search_range, return_row)
Dim myval ' String to represent return value (comma-separated list)
Dim comma ' Bool to represent whether we need to prefix the next result with ", "
comma = False
'Debug.Print find_value.value, return_row
For Each rw In search_range.Rows ' Iterate through each row in the range
If rw.Cells(1, 1).value = find_value Then ' If we have found the lookup value...
If comma Then ' Add a comma if it's not the first value we're adding to the list
myval = myval + ", "
Else
comma = True
End If
myval = myval + Str(rw.Cells(1, return_row).value)
End If
Next
MultiVlookup = myval
End Function
This may not be the cleanest way of doing it, and it isn't a direct copy of vlookup (for instance it does not have a fourth "range lookup" argument as vlookup does), but it works for my test:
Finally my original suggestion (in case it helps others - it's not the exact solution to the question) was:
I've not tried it myself, but this link shows what I think you might be looking for.
Great code, but don't forget to add the following is you use Option Explicit:
Dim rw As Range
WHEELS
I have some fields that need to be split up into different cells. They are in the following format:
Numbers on Mission 21 0 21
Numbers on Mission 5 1 6
The desired output would be 4 separate cells. The first would contain the words in the string "Numbers on Mission" and the subsequent cells would have each number, which is determined by a space. So for the first example the numbers to extract would be 21, 0, 21. Each would be in its own cell next to the string value. And for the second: 5, 1, 6.
I tried using a split function but wasn't sure how to target the numbers specifically, and to identify the numbers based on the spaces separating them.
Pertinent to your first case (Numbers on Mission), the simple solution could be as shown below:
Sub SplitCells()
Const RowHeader As String = "Numbers on Mission"
Dim ArrNum As Variant
ArrNum = Split(Replace(Range("A1"), RowHeader, ""), " ")
For i = 1 To UBound(ArrNum)
Cells(1, i + 2) = ArrNum(i)
Next
Cells(1, 2) = RowHeader
End Sub
The same logic is applicable to your second case. Hope this may help.
Unless I'm overlooking something, you may not need VBA at all. Have you tried the "Text to Columns" option? If you select the cell(s) with the information you would like to split up, and go to Data -> Text to Columns. There, you can choose "delimited" and choose a space as a delimiter, which will split your data into multiple cells, split by where the space is.
edit: Just realized that will also split up your string. In that case, when you are in 3rd part of the Text to Columns, choose a destaination cell that isn't the cell with your data. (I.E. if your data is in A1, choose B1 as destination, and it'll put the split info there. Then just combine the text columns with something like =B1&" "&C1&" "&D1)
I was able to properly split the values using the following:
If i.Value Like "*on Mission*" Then
x = Split(i, " ")
For y = 0 To UBound(x)
i.Offset(0, y + 1).Value = x(y)
Next y
End If
I have a worksheet with products where the people in my office can add new positions. The problem we're running into is that the products have specifications but not everybody puts them in (or inputs them wrong).
Example:
"cool product 14C"
Is there a way to convert Data Valuation option so that it warns me now in case I put "very cool product 14B" or anything that contains an already existing string of characters (say, longer than 4), like "cool produKt 14C" but also "good product 15" and so on?
I know that I can prevent 100% matches using COUNTIF and spot words that start/end in the same way using LEFT/RIGHT but I need to spot partial matches within the entries as well.
Thanks a lot!
If you want to cover typo's, word wraps, figure permutations etc. maybe a SOUNDEX algorithm would suit to your problem. Here's an implementation for Excel ...
So if you insert this as a user defined function, and create a column =SOUNDEX(A1) for each product row, upon entry of a new product name you can filter for all product rows with same SOUNDEX value. You can further automate this by letting user enter the new name into a dialog form first, do the validation, present them a Combo Box dropdown with possible duplicates, etc. etc. etc.
edit:
small function to find parts of strings terminated by blanks in a range (in answer to your comment)
Function FindSplit(Arg As Range, LookRange As Range) As String
Dim LookFor() As String, LookCell As Range
Dim Idx As Long
LookFor = Split(Arg)
FindSplit = ""
For Idx = 0 To UBound(LookFor)
For Each LookCell In LookRange.Cells
If InStr(1, LookCell, LookFor(Idx)) <> 0 Then
If FindSplit <> "" Then FindSplit = FindSplit & ", "
FindSplit = FindSplit & LookFor(Idx) & ":" & LookCell.Row
End If
Next LookCell
Next Idx
If FindSplit = "" Then FindSplit = "Cool entry!"
End Function
This is a bit crude ... but what it does is the following
split a single cell argument in pieces and put it into an array --> split()
process each piece --> For Idx = ...
search another range for strings that contain the piece --> For Each ...
add piece and row number of cell where it was found into a result string
You can enter/copy this as a formula next to each cell input and know immediately if you've done a cool input or not.
Value of cell D8 is [asd:3, wer:4]
Note the use of absolute addressing in the start of lookup range; this way you can copy the formula well down.
edit 17-Mar-2015
further to comment Joanna 17-Mar-2015, if the search argument is part of the range you're scanning, e.g. =FINDSPLIT(C5; C1:C12) you want to make sure that the If Instr(...) doesn't hit if LookCell and LookFor(Idx) are really the same cell as this would create a false positive. So you would rewrite the statement to
...
...
If InStr(1, LookCell, LookFor(Idx)) <> 0 And _
Not (LookCell.Row = Arg.Row And LookCell.Column = Arg.Column) _
Then
hint
Do not use a complete column (e.g. $C:$C) as the second argument as the function tends to become very slow without further precautions
I have two unordered sets of data here:
blah blah:2020:50::7.1:45
movie blah:blahbah, The:1914:54:
I want to extract all the data to the left of the year (aka, 1915 and 1914).
What excel formula would I use for this?
I tried this formula
=IF(ISNUMBER(SEARCH(":",A1)),MID(A1,SEARCH(":",A1),300),A1)
these were the results below:
: blahblah, The:1914:54::7
:1915:50::7.1:45:
This is because there is a colon in the movie title.
The results I need consistently are:
:1914:54::7.9:17::
:1915:50::7.1:45::
Can someone help with this?
You can use Regular Expressions, make sure you include a reference for it in your VBA editor. The following UDF will do the job.
Function ExtractNumber(cell As Range) As String
ExtractNumber = ""
Dim rex As New RegExp
rex.Pattern = "(:\d{4}:\d{2}::\d\.\d:\d{2}::\d:\d:\d:\d:\d:\d:\d)"
rex.Global = True
Dim mtch As Object, sbmtch As Object
For Each mtch In rex.Execute(cell.Value)
ExtractNumber = ExtractNumber & mtch.SubMatches(0)
Next mtch
End Function
Without VBA:
In reality you don't want to find the : You want to find either :1 or :2 since the year will either start with 1 or 2This formula should do it:
=MID(A1,MIN(IFERROR(FIND(":1",A1,1),9999),IFERROR(FIND(":2",A1),9999)),9999)
Look for a four digit string, in a certain range, bounded by colons.
For example:
=MID(A1,MIN(FIND(":" &ROW(INDIRECT("1900:2100"))&":",A1 &":" &ROW(INDIRECT("1900:2100"))&":")),99)
entered as an array formula by holding down ctrl-shift while hitting Enter would ensure years in the range 1900 to 2100. Change those values as appropriate for your data. The 99 at the end represents the longest possible string. Again, that can be increased as required.
You can use the same approach to return just the left hand part, up to the colon preceding the year:
=LEFT(A1,-1+MIN(FIND(":" &ROW(INDIRECT("1900:2100"))&":",A1 &":" &ROW(INDIRECT("1900:2100"))&":")))
Here is a screen shot, showing the original data in B1:B2, with the results of the first part in B4:B5, and the formula for B4 showing in the formula bar.
The results for the 2nd part are in B7:B9