I would like to show use case diagram me.What is correct use case diagram me about system hotel?
http://i.stack.imgur.com/KPsZU.png
Note :
- outside of system boundary is comment, Not use case
sorry don't have reputation 10. Don't show image this.
After a short review I would say that your use cases don't seem to be cut the right way. You are using <<include>> and <<extend>> in order to perform a functional analysis. This is not what use cases are all about. Each use case must show a piece of added value to its actor. I/E are a means of showing optionality for single UCs (means they can be added later in time or build a system with different level of value to the user). Showing a path of execution is something that goes completely into activity diagrams inside each use case.
As a take home message: If your UC diagrams start resembling a spider's web your design is likely broken.
Related
I am new to object oriented design and I wanted to do my first ever UML use case Diagram on a simple application which contains toolbar on the top left corner. The toolbar is called files and when the user clicks on it,a drop down menu is opened with options to open a slide,save slide,make new slide and exit the application.
My question is, am I doing it correct with Use-Case inheritance(Generalization) ?
This is my diagram.
I am sorry to disapoint you, but I have to tell you that this practice is just plain wrong:
From the point of view of the semantics, the use-case specialization means that Open presentation is a special form of Check file, and Save file as well, and that the actor could use them interchangeably and independently. But this cannot be what you mean: exiting a presentation is at best a sub-part of checking a file
From the point of view of the purpose, a use-case should represent a user goal. It's part of the problem space, i.e. what the user wants to achieve. It's not part of the solution space, i.e. how the user will achieve it. A toolbar is not a goal: it's a user-interface element.
From the engineering practice perspective, use-case should not be used for user-interface design. It's not my own statement, but that of Jacobson, Booch and Rumbaugh, the founding fathers of UML:
The problem is that the [use-case] descriptions often contain implicit decisions about user-interfaces. Later, when the user interface designers suggest suitable user-interfaces for the use-case , they may be limited by those decisions.
in The unified software development process, page 164
So in conclusion, it's a bad idea to start use-cases from the user-interface. It locks you into your own design and ignores the user experience. You should focus instead only on the user needs. THe same use-case could then be used whether you'll implement it using a GUI interface, a chatbot interface, or a a voice-based interface.
While drawing Use Case diagram, one thing you should focus on is, the actual meaning of it and the purpose of drawing it.
A Use Case refers to what the users in respect of their type are able to do in your System... Anything inside the boundary is what system is capable of doing or what it can provide as a service to its users.
While naming the use cases, you should only use verbs and actions, for example:
1- Login | 2- Submit a Request | 3- Update Profile Description
You should avoid any nouns in them.
There are several relationships that exist in a Use Case Diagram among use cases, and a relationship among actors and use cases of the system, And They are as follows:
Association: the only relationship that can exist between an actor and a use case; Which says the actor is initiator of this use case, or is the one who is caple of operating the use case.
In the example above, User is caple of loggin in and submitting a complaint.
Include: Use Cases can include one or more use cases. When a use case includes another use case, it means the included use case or use cases happen all the time and are part of the initial use case.
Paying fees is included, because user has to pay the fees in signing up process, it has to be done, and it's part of the baseline path of the scenario.
Extend: When a use case is not happening all the time, and is part of your alternative path ( Alternative path of the complete scnario for this use case ), the use case should be extended to the base use case.
Forget password is extended to Login use case, because it doesn't happen all the time, and it's part of a alternative path of Login scenario.
Generalization: When there exist several different ways that a use case can be performed and completed, we use generalization. The inheritent use cases should all be of the same type as the inherited use case.
Submitting a complaint can be done in several different ways, in this case, we need to seprate each use case and inherit from from the submit a complaint use case which includes paying fees, this shows that, paying fees is a part of every type of complaint which is submitted.
[Original Title] : Does an actor need to point directly in use case diagram?
or can I do it like this?
in this Use Case Diagram, I want to say that actor can use any use case in the pointed group-of-use-case.
does this kind of thing allowed?
Edit #1
The reason why I ask this question, is because when I create this use case there's a lot of line intersecting each other that makes me confuse.
And there's a comment :
It would be better to split that into smaller diagrams
does it mean like this?
Edit #2
after reading comment :
A UseCase specifies a set of actions performed by its subjects, which yields an observable result that is of value for one or more Actors or other stakeholders of each subject.
so I decided to change to this :
is this how a use case diagram should be?
Edit #3
CONCLUSION
An actor should point directly to use case
Read more the detail about how a Use Case Diagram should be in comment on this question
To be UML compliant you can not do that. But I guess one can understand what you are trying to communicate.
As a side note: Login is not a business use case. It is a constraint. Also with CRUD use cases I would not separate them but have a Maintain <object> instead (which itself is some borderline use case since maintaining something is not directly business relevant). You can constrain maintenance operations to certain actors separately.
Edit Regarding Login (one of my favorites): Use cases are most commonly used to describe business context (exactly as you are doing). So when looking from a business perspective, a Login is not a use case, but a simple constraint (you can do the business relevant things only when you are logged in).
Now for the Manage/Maintain use cases. They are on a similar level. Usually the "managing" itself is not directly business related. In many cases the focus on the real business was lost. So instead the reason why you manage something is the real use case (e.g. Correct User Data, Collect User Data). This is quite challenging and I confess that sometimes I also fall back to Manage. Most people don't bother but doing a good job requires to think over basics and not adopt bad habits.
Case(Detailed): User select some files in android applicaiton and send SOAP request to WebService to set the selected files as Favorite.
Case(With few words): User want to set some files as favorites
Sequence Diagram is:
User-->FileBrowser-->WebService-->DbManager-->Database
So, is the below diagram correct or i am missing something?
Your diagram looks fine. However, I noticed from your other question that you are now mixing business and technical aspects. If you want to do a use case synthesis for the business (which is the most common application of that) you must not start mixing technical aspects. Having said this, Login is not a business use case. A use case describes in short terms the added value which an actor receives when applying it. On a business level, a login is just a constraint since it does not add any value.
As an advice:
Start with use cases on a pure business perspective.
Think what actually is added value.
Which are the stakeholders?
What are their requirements?
Which requirements can be synthesized to use cases?
Only after that start a technical design. In that you may use use cases on a technical level where you may describe a Login use case as part of an authentication sub-system.
Should you not include some kind of system, whereby user and server is outside of it? My teachers always commented on involving the system.
List all the users outside the system. The use case serves as an answer to:"What will the system do?". Is the database used by external users/systems? In that case it's better to represent it as a seperate actor.
Perhaps an idea to write a full use case before making a use casediagram.
Two things are not according to UML:
The include dependency should have an open arrowhead pointing to 'selct file'.
The word include must be surrounded by «guillemets»
Recommendations:
Use a consistent naming convention for the use cases. It is common to use imperative style, with at least one verb and one noun e.g. "Select file" and "Choose favorite files".
Draw a system boundary (rectangle) around the use cases, leaving the actors outside of the boundary. Enter a descriptive name inside the boundary, e.g. "Android app".
I just want to determine if I am using extend and include correctly. If I am using either incorrectly somewhere here please indicate where, and if possible, why it is incorrect.
https://imageshack.com/scaled/large/163/nlnk.jpg
Cheers.
Rules for using <<include>> and <<extend>> are simple:
<<include>> defines a sub use-case which is always included in the general use-case: use-case -include--> sub use-case. Usually it's used to denote a distinct part of a use-case or a common part that can be reused by other use-cases.
<<extend>> defines an optional sub use-case that can be executed upon certain conditions (which should be defined at a lower level design, not in use-case diagram). Here the direction of the relation is opposite to the <<include>> relation: use-case <--extend- sub use-case.
Apply these rules to your diagram and figure out if it's correct.
It looks as though "secure login" is required to be performed prior to the other activities that you link with <<include>>. Include implies that the use case also runs the included use case every time which in this case is probably not what you intend (just one login per session). You can always create new stereotypes, such as <<precedes>> or <<requires>>. Using them consistently will allow you to convey your meaning.
I find this piece of advice before when I'm trying to distinguish the difference between using extend and intend in use case diagram.. I hope it helps you too. The original advice comes from this StackOverflow answer.
Difference between extend and include
Extend is used when a use case conditionally adds steps to another
first class use case. For example, imagine "Withdraw Cash" is a use
case of an ATM machine. "Assess Fee" would extend Withdraw Cash and
describe the conditional "extension point" that is instantiated when
the ATM user doesn't bank at the ATM's owning institution. Notice that
the basic "Withdraw Cash" use case stands on its own, without the
extension.
Include is used to extract use case fragments that are duplicated in
multiple use cases. The included use case cannot stand alone and the
original use case is not complete without the included one. This
should be used sparingly an only in cases where the duplication is
significant and exists by design (rather than by coincidence). For
example, the flow of events that occurs at the beginning of every ATM
use case (when the user puts in their ATM card, enters their PIN, and
is shown the main menu) would be a good candidate for an include.
Also, from every book I've read, it is always recommended to use include and extend sparingly. Keep It Simple Silly.
Many relationships are clearly not correct here. However, I think the main issue with this diagram is not the correct use of include and extend, but rather to complex and overall unclear relationships. Although sitactically valid, you should avoid using more than one level of these relationships.
Your diagram is really hard to follow and to interpret.
Some refactoring ideas and corrections:
show "Secure login" class separately, linked only with Actor and then apply the following precondition for all use cases that "include" it: "User is securelly logged in"
"Logout after 5 mins" should be own use case, only connected to Actor as well, with 2 preconditions: "User is securelly logged in" and "User was inactive for 5 mins"
Remove the include between "Logout after 5 mins" and "Initiate a call". Extend might be more appropriate
reverse the direcction of the include between "Transfer funds..." and "Insure adequate funds..." - it is clear that the first one includes the second one and not vice versa
consider breaking a diagram in 2 or more simple and small diagrams of only related UCs: all login/logout could for example be shown separate and simplify the view. You should not have more than 5-7 use cases on one diagram
Is this use case diagram over complicated? I'm trying to implement a use case for the first time, and I'm trying to get it within the ball park.
Jordan, your use case is missing out the system name at the top.
And there is no over-complicated Use Case Diagram, as long as it fits the requirements of the client.
P.S: By the way, the following Use Case Diagram is one of my assignment in school (so it's not for a system to be built, but similar anyway). It's way complex than what you have there, but it's not over-complicated because the system needs all these use-cases. Imagine drawing the use case of Twitter or Facebook.
Merlion University Student Association System Use Case Diagram
Doesn't look overly complicated, but you're missing the part that goes on the right, which is the actions in the box use/affect. For example, Add Account may communicate with a database, in which case you'd put a box on the right (outside of the center box) called Database and have Add Account point to it.