Here's The Scoop,
I used SET (Social Engineering Toolkit) and made duplicite of a login page, the ip that was used was 10.0.2.15 (Mind you this is on a virtual machine Virtualbox), and when I tried to view it on another computer, it says the server is not responding.I tried to port forward but it was giveing me issues.
is there anything I can do to port forward or do something like that to make the web page connected to the IP viewable on the World Wide Web of another computer.
In other words, the IP's page is only viewable on the same computer who's ip I used to host, can you make it viewable on any computers browser by port forwarding it or something that will work like that.
Use bridging networking for the guest machine. Then, that IP address should be accessible on your network if there are no firewalls enabled.
There are several issues with directly accessing this IP from a separate computer.
First, the forwarding: the computer with the VirtualMachine must accept ip forwarding. This is easy to enable:
https://wiki.archlinux.org/index.php/Internet_sharing
Second, the routing: other computers must know who to ask when looking for 10.0.2.15. This is the hardest part. You could try adding a special route rule on the other computer, to set the host as a gateway for 10.0.2.15, but it requires you to make this on every machine that wishes to access the VM.
As Ahmed said, the easiest way is probably to use a network bridge, where the virtual machine will act as any other computer on the network, with a visible IP.
Related
Both devices are connected to the same WiFi network.
I have set IIS bindings to allow connections to my IP:
However, my computer's IP address is the same as my iPad's.
Is there a way to make this work?
That's not your IP. Every time you use a laptop on a Wifi network, you'll be using the public IP address of whatever network you're on.
The IP address of "your" computer doesn't belong to your computer. It belongs to the network you're connected to. Your computer is just borrowing it for a while.
Try to set a static IP address for your computer and use another machine to send ping command to it. Then use iPad to connect.
Initially when I posted this question, I was using an xfinitywifi hotspot and I assume that came with a whole host of problems. Full-disclosure, I did not figure out how to make it work in this scenario.
However when I moved to my own home wifi network, I was still having this problem.
I had to do two things, one of which, I know is not recommended, but it was really easy.
First, I had to enter my network and sharing center and set my connection as home connection instead of public which is what I previously had it at.
Second, which is not recommended, I turned off Windows firewall. I only do this when I need to access my site from another device for debugging. I turn it back on when I am done. For a more permanent setup I know it is recommended to just enable the port you need, but I could not figure this out.
I'm currently trying to route my internet traffic from my Windows laptop(192.168.1.73) to my other laptop running Kali Linux(192.168.1.64), both on the same network. The idea is the Linux laptop would anonymise the traffic sent, possibly hiding my IP in some way. I'm stuck on how to exactly go about this. I've tried using OpenVPN but to no avail.
192.168.1.x is not public IP subnet. So both your computers are in local net. And so one or both have yet default gateway address for access to Internet and another networks. If you want route Internet traffic through the Windows Laptop to Linux computer you have to setup the Windows IP address like default gateway for Linux computer.
Then on Windows you can used two options for access to Internet for Linux:
1. enabled routing functions use Windows like just router
2. used third party software (like Wingate etc) use Windows like NAT proxy
In the first option the Linux IP address will be view at ISP devices
In the second option the Linux IP address will be change on Windows IP adress
The first is very simple for management. The second is harder.
But I don't understood why it all. If you wanna more security in Internet network you can use https://www.whonix.org/wiki/Download and get maximum security level.
I'd honestly trash this idea and use Tor browser instead, you will be 100% anonymous if you follow the guidelines on their website.
The Tor project:
https://www.torproject.org/
Tips on staying anonymous:
https://www.torproject.org/about/overview.html.en#stayinganonymous
Well and if you seriously want to route the traffic to your Kali machine, use some built-in MITM tools (eg. Arpspoof), but be aware, that this will NOT make you anonymous to the outside (Internet).
Here is how you set-up the MITM, but without the intercepting of traffic:
First, we need to forward all the trafic that the Kali machine recieves to the internet
sysctl -w net.ipv4.ip_forward=1
Then you need to send the forged ARP replies
arpspoof -i [Network Interface Name] -t [Windows IP] [Router IP]
So it should look something like this, you can find the router ip by running the command ifconfig (look for "default gateway")
arpspoof -i wlan0 -t 192.168.1.73 192.168.1.1
Then it should be up and running, tunneling you through the Kali machine.
I will be sending a linux machine to a non technical customer overseas. After the customer has connected the machine to his LAN , which is also connected to the Internet, I want to be able to ssh into this machine without requiring the customer to do any router configuration (no port forwarding for instance).
The linux machine is connected to the internet through a router. It does not have a public ip address.
Is this possible using ssh configuration only?
If not then what is the simplest way to achieve this?
I used to work in a place where we had a setup that allowed for this, but unfortunately I can't remember the details - here is are the basics of the setup though.
The customers machine would connect using SSH to a machine with a known hostname using the -R option to ssh to setup a reverse port forward. We could then connect to the known machine and use the forwarded port to get to port 22 on the customers machine.
Sorry I can't remember more, but it worked absolutely perfect :)
If that linux system is directly connected with modem then it must have public ip address so you will able to access that linux system from anywhere . but make sure the remote system has static public ip address otherwise you need to do dynamic dns.
I installed IIS on a laptop (win 7 professional 64 bit).
Created a website. I been able to view the website within the network.
If i type 192.168.0.227/vdv (local host ip address)(laptop's ip).
Now i need to access this website from outside the network.
I bought a WiFi modem and connected to the lap (now lap is disconnected from LAN). The modem has a dynamic IP & lap is assigned 192.168.100.100. Now i need to access the website which is in the laptop from outside the network .
How to do ?
If I am reading your post correctly, you are running IIS locally but you are having problems connecting when your local IP changes.
By Default, IIS binds to all IP addresses, so it really shouldn't matter if you use your LAN ip or Modem IP. Either way, for simplicity you should either be using localhost or 127.0.0.1 or your machine name as your address. This won't change when your local IP does.
First see if http://localhost/vdv works. If it does then continue to use that, otherwise you may need to change the bindings in your local IIS installation or your application. Make sure it's not listening on a specific IP address.
Take a look at this article for more information: http://blogs.technet.com/b/chrad/archive/2010/01/24/understanding-iis-bindings-websites-virtual-directories-and-lastly-application-pools.aspx
Is their a way to access a web server such as windows server 2003 installed on a virtual box such as vmware from the host machine?
If VMware is set to use bridged networking, then each guest OS effectively has its own IP address, like brien said, you just point your browser to that address.
If you configure your virtual machine to use bridged networking, instead of NAT, it will have its own IP address "beside" the host machine, instead of a local IP address "behind" it. Then you can connect to the virtual machine, using that IP number.
(Disclaimer: I've used VMware workstation for several years, but not their server products.)
Yes, you should just be able to point to the IP address of the VM.
How is your VM networking configured?
I am doing this all over the place, just make sure that the vm has an ip configured.
i believe vmware (workstation?) also has built in a virtual network client (VNC) that you can connect to - enable it by going to the configuration properties of the vm, and in the last tab there is a checkbox for it.
IP address should do it.
I faced the same issue. You have to set your networkconnection to "bridged mode" in your VM. Then you have to find out the IP of your Webserver.
Sometimes Webservers have a redirect to a specific URL. In this case you can edit your host-file in C:/Windows/System32/drivers/etc/hosts and add your IP with the redirected URL like this:
192.168.0.37 some.url-you.need
Then your Host can go to the Webserver. Even participants of your Ethernet can access the Webserver.