Learning sed, and I was using a live editor so I can experiment/see changes.
sed -nf '/START FROM HERE/,${/NEXTLINE/{n;p;q}}'
When trying to run the same code, on Linux, I receive error No such file or Directory when I execute as ./xxx.sed text0.txt
I've tried a couple of things but I am not sure how to use sed like this.
The -f option means that the next argument is the name of a file containing the sed commands. So you need to put
/START FROM HERE/,${/NEXTLINE/{n;p;q}}
in the file xxx.sed. Then you do:
sed -nf xxx.sed test0.txt
If you want to be able to execute xxx.sed as a command, it needs a shebang line:
#!/usr/bin/sed -nf
/START FROM HERE/,${/NEXTLINE/{n;p;q}}
Then you can make the file executable and do:
./xxx.sed file0.txt
cat urls.txt | xargs -P 10 -n 1 wget -nH -nc -x]
This shell is very confusing to new user, just want to ask if there is any reference document I can refer？
There is nothing much confusing about it.
If you want to know what the commands do then use the manual.
man cat
man xargs
The pipe sends the output of one command to the next, in this case cat urls.txt to xargs.
cat urls.txt will write the contents of the file urls.txt to stdout, which is then used as the input for xargs.
xargs -P 10 -n 1 will execute a command with with the input (the contents of urls.txt) as arguments. The command in this case being wget -nH -nc -x]. I don't know what ] is supposed to do there, but that's probably a typo.
All in all you can understand, without much caring about the options, that this will download a list of files that is in urls.txt into your current directory. Of course it's always safe to check the options flags. in this case -nc for example causees wget to rename a downloaded file and append a number if the file is already in the directory.
All three man pages can also be found online:
cat
xargs
wget
you can follow this book https://www.iiitd.edu.in/~amarjeet/Files/SM2012/Linux%20Dummies%209th.pdf
And best way to learn Linux command is use man command
example :
type > man xargs on terminal you will get all detail
you will get man page for all linux comman
The best way is follow this link https://explainshell.com
I want to save a command to a file (for example I want to save the string "cat /etc/passwd" to a file) but I can't use the echo command.
How can I create and save string to a file directly without using echo command?
You can redirect cat to a file, type the text, and press Control-D when you're done, like this:
cat > file.txt
some text
some more text
^D
By ^D I mean to press Control-D at the end. The line must be empty.
It will not be part of the file, it is just to terminate the input.
Are you avoiding ECHO for security purposes (e.g. you're using a shared terminal and you don't want to leave trace in the shell history of what you've written inside your files) or you're just curious for an alternative method?
Simple alternative to echo:
As someone said, redirecting cat is probably the simpler way to go.
I'd suggest you to manually type your end-of-file, like this:
cat <<EOF > outputfile
> type here
> your
> text
> and finish it with
> EOF
Here's the string you're asking for, as an example:
cat <<EOF > myscript.sh
cat /etc/passwd
EOF
You probably don't want everyone to know you've peeked into that file, but if that's your purpose please notice that wrapping it inside an executable file won't make it more private, as that lines will be logged anyway...
Security - Avoiding history logs etc..
In modern shell, just try adding a space at the beginning of every command and use freely whatever you want.
BTW, my best hint is to avoid using that terminal at all, if you can. If you got two shells (another machine or even just another secure user in the same machine), I'd recommend you using netcat. See here: http://www.thegeekstuff.com/2012/04/nc-command-examples/?utm_source=feedburner
{ { command ls $(dirname $(which cat)) |
grep ^ca't$'; ls /etc/passwd; } |
tr \\n ' '; printf '\n'; } > output-file
But it's probably a lot simpler to just do : printf 'cat /etc/passwd\n'
To be clear, this is a tongue-in-cheek solution. The initial command is an extraordinarily convoluted way to get what you want, and this is intended to be a humorous answer. Perhaps instructive to understand.
I am not sure I understood you correctly but
cat /etc/passwd > target.file
use the > operator to write it to file without echoing
If you need to use it, inside a program :
cat <<EOF >file.txt
some text
some more text
EOF
I would imagine that you are probably trying to print the content of a string to a file, hence you mentioned echo.
You are avoiding this:
echo "cat /etc/passwd" > target.file
You can use a here string combined with cat.
cat > target.file <<< "cat /etc/passwd"
Now the file target.file will contain a string cat /etc/passwd.
$ cat target.file
cat /etc/passwd
$
To create string:
var1=your command
to save a file or variable in a file without echo use:
cat $FILE/VAR1 > /new/file/path
What's the simplest way to do a find and replace for a given input string, say abc, and replace with another string, say XYZ in file /tmp/file.txt?
I am writting an app and using IronPython to execute commands through SSH — but I don't know Unix that well and don't know what to look for.
I have heard that Bash, apart from being a command line interface, can be a very powerful scripting language. So, if this is true, I assume you can perform actions like these.
Can I do it with bash, and what's the simplest (one line) script to achieve my goal?
The easiest way is to use sed (or perl):
sed -i -e 's/abc/XYZ/g' /tmp/file.txt
Which will invoke sed to do an in-place edit due to the -i option. This can be called from bash.
If you really really want to use just bash, then the following can work:
while IFS='' read -r a; do
echo "${a//abc/XYZ}"
done < /tmp/file.txt > /tmp/file.txt.t
mv /tmp/file.txt{.t,}
This loops over each line, doing a substitution, and writing to a temporary file (don't want to clobber the input). The move at the end just moves temporary to the original name. (For robustness and security, the temporary file name should not be static or predictable, but let's not go there.)
For Mac users:
sed -i '' 's/abc/XYZ/g' /tmp/file.txt
(See the comment below why)
File manipulation isn't normally done by Bash, but by programs invoked by Bash, e.g.:
perl -pi -e 's/abc/XYZ/g' /tmp/file.txt
The -i flag tells it to do an in-place replacement.
See man perlrun for more details, including how to take a backup of the original file.
I was surprised when I stumbled over this...
There is a replace command which ships with the "mysql-server" package, so if you have installed it try it out:
# replace string abc to XYZ in files
replace "abc" "XYZ" -- file.txt file2.txt file3.txt
# or pipe an echo to replace
echo "abcdef" |replace "abc" "XYZ"
See man replace for more on this.
This is an old post but for anyone wanting to use variables as #centurian said the single quotes mean nothing will be expanded.
A simple way to get variables in is to do string concatenation since this is done by juxtaposition in bash the following should work:
sed -i -e "s/$var1/$var2/g" /tmp/file.txt
Bash, like other shells, is just a tool for coordinating other commands. Typically you would try to use standard UNIX commands, but you can of course use Bash to invoke anything, including your own compiled programs, other shell scripts, Python and Perl scripts etc.
In this case, there are a couple of ways to do it.
If you want to read a file, and write it to another file, doing search/replace as you go, use sed:
sed 's/abc/XYZ/g' <infile >outfile
If you want to edit the file in place (as if opening the file in an editor, editing it, then saving it) supply instructions to the line editor 'ex'
echo "%s/abc/XYZ/g
w
q
" | ex file
Example is like vi without the fullscreen mode. You can give it the same commands you would at vi's : prompt.
I found this thread among others and I agree it contains the most complete answers so I'm adding mine too:
sed and ed are so useful...by hand.
Look at this code from #Johnny:
sed -i -e 's/abc/XYZ/g' /tmp/file.txt
When my restriction is to use it in a shell script, no variable can be used inside in place of "abc" or "XYZ". The BashFAQ seems to agree with what I understand at least. So, I can't use:
x='abc'
y='XYZ'
sed -i -e 's/$x/$y/g' /tmp/file.txt
#or,
sed -i -e "s/$x/$y/g" /tmp/file.txt
but, what can we do? As, #Johnny said use a while read... but, unfortunately that's not the end of the story. The following worked well with me:
#edit user's virtual domain
result=
#if nullglob is set then, unset it temporarily
is_nullglob=$( shopt -s | egrep -i '*nullglob' )
if [[ is_nullglob ]]; then
shopt -u nullglob
fi
while IFS= read -r line; do
line="${line//'<servername>'/$server}"
line="${line//'<serveralias>'/$alias}"
line="${line//'<user>'/$user}"
line="${line//'<group>'/$group}"
result="$result""$line"'\n'
done < $tmp
echo -e $result > $tmp
#if nullglob was set then, re-enable it
if [[ is_nullglob ]]; then
shopt -s nullglob
fi
#move user's virtual domain to Apache 2 domain directory
......
As one can see if nullglob is set then, it behaves strangely when there is a string containing a * as in:
<VirtualHost *:80>
ServerName www.example.com
which becomes
<VirtualHost ServerName www.example.com
there is no ending angle bracket and Apache2 can't even load.
This kind of parsing should be slower than one-hit search and replace but, as you already saw, there are four variables for four different search patterns working out of one parse cycle.
The most suitable solution I can think of with the given assumptions of the problem.
You can use sed:
sed -i 's/abc/XYZ/gi' /tmp/file.txt
You can use find and sed if you don't know your filename:
find ./ -type f -exec sed -i 's/abc/XYZ/gi' {} \;
Find and replace in all Python files:
find ./ -iname "*.py" -type f -exec sed -i 's/abc/XYZ/gi' {} \;
Be careful if you replace URLs with "/" character.
An example of how to do it:
sed -i "s%http://domain.com%http://www.domain.com/folder/%g" "test.txt"
Extracted from: http://www.sysadmit.com/2015/07/linux-reemplazar-texto-en-archivos-con-sed.html
If the file you are working on is not so big, and temporarily storing it in a variable is no problem, then you can use Bash string substitution on the whole file at once - there's no need to go over it line by line:
file_contents=$(</tmp/file.txt)
echo "${file_contents//abc/XYZ}" > /tmp/file.txt
The whole file contents will be treated as one long string, including linebreaks.
XYZ can be a variable eg $replacement, and one advantage of not using sed here is that you need not be concerned that the search or replace string might contain the sed pattern delimiter character (usually, but not necessarily, /). A disadvantage is not being able to use regular expressions or any of sed's more sophisticated operations.
You may also use the ed command to do in-file search and replace:
# delete all lines matching foobar
ed -s test.txt <<< $'g/foobar/d\nw'
See more in "Editing files via scripts with ed".
To edit text in the file non-interactively, you need in-place text editor such as vim.
Here is simple example how to use it from the command line:
vim -esnc '%s/foo/bar/g|:wq' file.txt
This is equivalent to #slim answer of ex editor which is basically the same thing.
Here are few ex practical examples.
Replacing text foo with bar in the file:
ex -s +%s/foo/bar/ge -cwq file.txt
Removing trailing whitespaces for multiple files:
ex +'bufdo!%s/\s\+$//e' -cxa *.txt
Troubleshooting (when terminal is stuck):
Add -V1 param to show verbose messages.
Force quit by: -cwq!.
See also:
How to edit files non-interactively (e.g. in pipeline)? at Vi SE
Try the following shell command:
find ./ -type f -name "file*.txt" | xargs sed -i -e 's/abc/xyz/g'
You can use python within the bash script too. I didn't have much success with some of the top answers here, and found this to work without the need for loops:
#!/bin/bash
python
filetosearch = '/home/ubuntu/ip_table.txt'
texttoreplace = 'tcp443'
texttoinsert = 'udp1194'
s = open(filetosearch).read()
s = s.replace(texttoreplace, texttoinsert)
f = open(filetosearch, 'w')
f.write(s)
f.close()
quit()
Simplest way to replace multiple text in a file using sed command
Command -
sed -i 's#a/b/c#D/E#g;s#/x/y/z#D:/X#g;' filename
In the above command s#a/b/c#D/E#g where I am replacing a/b/c with D/E and then after the ; we again doing the same thing
You can use rpl command. For example you want to change domain name in whole php project.
rpl -ivRpd -x'.php' 'old.domain.name' 'new.domain.name' ./path_to_your_project_folder/
This is not clear bash of cause, but it's a very quick and usefull. :)
For MAC users in case you don't read the comments :)
As mentioned by #Austin, if you get the Invalid command code error
For the in-place replacements BSD sed requires a file extension after the -i flag to save to a backup file with given extension.
sed -i '.bak' 's/find/replace' /file.txt
You can use '' empty string if you want to skip backup.
sed -i '' 's/find/replace' /file.txt
All merit to #Austin
Open file using vim editor. In command mode
:%s/abc/xyz/g
This is the simplest
In case of doing changes in multiple files together we can do in a single line as:-
user_name='whoami'
for file in file1.txt file2.txt file3.txt; do sed -i -e 's/default_user/${user_name}/g' $file; done
Added if in case could be useful.
How can we append text in a file via a one-line command without using io redirection?
If you don't mind using sed then,
$ cat test
this is line 1
$ sed -i '$ a\this is line 2 without redirection' test
$ cat test
this is line 1
this is line 2 without redirection
As the documentation may be a bit long to go through, some explanations :
-i means an inplace transformation, so all changes will occur in the file you specify
$ is used to specify the last line
a means append a line after
\ is simply used as a delimiter
If you just want to tack something on by hand, then the sed answer will work for you. If instead the text is in file(s) (say file1.txt and file2.txt):
Using Perl:
perl -e 'open(OUT, ">>", "outfile.txt"); print OUT while (<>);' file*.txt
N.B. while the >> may look like an indication of redirection, it is just the file open mode, in this case "append".
You can use the --append feature of tee:
cat file01.txt | tee --append bothFiles.txt
cat file02.txt | tee --append bothFiles.txt
Or shorter,
cat file01.txt file02.txt | tee --append bothFiles.txt
I assume the request for no redirection (>>) comes from the need to use this in xargs or similar. So if that doesn't count, you can mute the output with >/dev/null.
You can use Vim in Ex mode:
ex -sc 'a|BRAVO' -cx file
a append text
x save and close
On Linux/GNU systems, the simplest and cleanest solution is:
dd of=oldfile oflag=append conv=notrunc
Simple and clean, because no quoting or backslashitis is required.
Unfortunately, this also doesn't work on BSD (and so, on Darwin), because their dd has no oflag . Argh! Can anyone suggest how to do it with the BSD dd ?