I am new to 'libreconv' gem,
I am using Ruby 2.2.0 and Rails 4.2.0 version
While I am converting Ms Word document to PDF, I get following error:
2.2.0 > Libreconv.convert('sample1.doc', '/Users/rp/test_document.pdf')
Errno::ENOENT: No such file or directory # rb_sysopen - /tmp/sample1.pdf
from /home/rp/.rvm/rubies/ruby-2.2.0/lib/ruby/2.2.0/fileutils.rb:1391:in `initialize'
Any Suggestions ?
I solved this problem with such patch:
class Libreconv::Converter
alias_method :old_convert, :convert
def convert
if Rails.env.development?
old_convert
else
%x(sudo #{#soffice_command} --headless --convert-to pdf --outdir #{#target_path} #{#source})
target_tmp_file = "#{#target_path}/#{File.basename(#source, ".*")}.pdf"
FileUtils.cp target_tmp_file, #target
end
end
end
Related
I'm working with Yocto "Gatesgarth" on a custom board based on i.MX6ULL.
I'm facing some problems in generating the extensible SDK (eSDK).
The generation of normal SDK it's accomplished correctly.
Below some details.
Details of system:
Board based on NXP i.MX6ULL
Yocto version "Gatesgarth 3.2.4 (May 2021)"
BB_VERSION = "1.48.0",
NATIVELSBSTRING = "ubuntu-18.04"
DISTRO_VERSION = "5.10-gatesgarth"
meta-qt5 is present
Build environment based on Docker Container
Environment Variable:
File: conf/local.conf
SDKMACHINE ?= 'x86_64'
File: test-image-mx6ull.bb
inherit core-image
inherit populate_sdk_qt5
inherit populate_sdk_ext
SDK_EXT_TYPE = "minimal"
SDK_INCLUDE_TOOLCHAIN = "1"
SDK_INCLUDE_PKGDATA = "0"
SDK_INCLUDE_NATIVESDK = "1"
The command executed is :
bitbake test-image-mx6ull -c populate_sdk_ext
Output:
ERROR: test-image-mx6ull-1.0-r0 do_populate_sdk_ext: Error executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_populate_sdk_ext(d)
0003:
File: '/yocto/sources/poky/meta/classes/populate_sdk_ext.bbclass', lineno: 720, function: do_populate_sdk_ext
0716: bb.fatal('The extensible SDK can currently only be built for the same architecture as the machine being built on - SDK_ARCH is set to %s (likely via setting
SDKMACHINE) which is different from the architecture of the build machine (%s). Unable to continue.' % (d.getVar('SDK_ARCH'), d.getVar('BUILD_ARCH')))
0717:
0718: d.setVar('SDK_INSTALL_TARGETS', get_sdk_install_targets(d))
0719: if d.getVar('SDK_INCLUDE_BUILDTOOLS') == '1':
*** 0720: buildtools_fn = get_current_buildtools(d)
0721: else:
0722: buildtools_fn = None
0723: d.setVar('SDK_REQUIRED_UTILITIES', get_sdk_required_utilities(buildtools_fn, d))
0724: d.setVar('SDK_BUILDTOOLS_INSTALLER', buildtools_fn)
File: '/yocto/sources/poky/meta/classes/populate_sdk_ext.bbclass', lineno: 556, function: get_current_buildtools
0552: import glob
0553: btfiles = glob.glob(os.path.join(d.getVar('SDK_DEPLOY'), '*-buildtools-nativesdk-standalone-*.sh'))
0554: btfiles.sort(key=os.path.getctime)
0555: print("MY-DEBUG - btfiles = {} - SDK_DEPLOY = {}".format(btfiles, d.getVar('SDK_DEPLOY')))
*** 0556: return os.path.basename(btfiles[-1])
0557:
0558:def get_sdk_required_utilities(buildtools_fn, d):
0559: """Find required utilities that aren't provided by the buildtools"""
0560: sanity_required_utilities = (d.getVar('SANITY_REQUIRED_UTILITIES') or '').split()
Exception: IndexError: list index out of range
DEBUG: Python function do_populate_sdk_ext finished
MY-DEBUG - btfiles = [] - SDK_DEPLOY = /yocto/build-mX6ull/tmp/deploy/sdk
Question:
In line 553 the array btfiles should be filled,
but the array is empty and the line 556 generate the exception.
I have no idea of whats is wrong, what I have forget and what Yocto environment variables are needed to setup to do a correctly work.
hope you are doing good
i had similar issue where i couldnt populate esdk,
its all in GLIBC version..
kindly update your GLIBC version
In my case i had to update GLIBC version to 2.33 in "yocto-uninative.inc" file. It worked for me!!!
I'm trying to run google assistant on my raspberry pi following the steps on: https://developers.google.com/assistant/sdk/guides/service/python/embed/run-sample
all works fine until activating the Google Assistant with the command:
googlesamples-assistant-pushtotalk --project-id my-dev-project --device-model-id my-model
I'm getting the following ImportError:
Traceback (most recent call last):
File "/home/pi/env/bin/googlesamples-assistant-pushtotalk", line 5, in <module>
from googlesamples.assistant.grpc.pushtotalk import main
File "/home/pi/env/lib/python3.9/site-packages/googlesamples/assistant/grpc/pushtotalk.py", line 28, in <module>
import grpc
File "/home/pi/env/lib/python3.9/site-packages/grpc/__init__.py", line 22, in <module>
from grpc import _compression
File "/home/pi/env/lib/python3.9/site-packages/grpc/_compression.py", line 15, in <module>
from grpc._cython import cygrpc
ImportError: /home/pi/env/lib/python3.9/site-packages/grpc/_cython/cygrpc.cpython-39-arm-linux-gnueabihf.so: undefined symbol: __atomic_exchange_8
Any ideas on how to fix this?
just ended up here since I ran into the same problem (on a different project) but also involving python3.9, cygrpc on a RPi4 with a recent raspbian-lite (32bit).
While I don't have a solution here are my guesses:
formerly __atomic_exchange_8 was defined in /lib/arm-linux-gnueabihf/libgcc_s.so.1 but now it seems defined in libatomic:
$ grep __atomic_exchange_8 /lib/arm-linux-gnueabihf/libatomic.so.1
grep: /lib/arm-linux-gnueabihf/libatomic.so.1: binary file matches
EDIT:
Solved it. I was looking at the patch which tried to solve the problem two years ago:
https://github.com/grpc/grpc/pull/20514/commits/b912fc7d8d401bb65b3147ee77d03beaa3d46038
I figured their test check_linker_need_libatomic() might be broken, and patched it again to always return True, the problem got fixed.
Had tried earlier to fix it by adding CFLAGS='-latomic' CPPFLAGS='-latomic' but that didn't help.
here's my tiny workaround (not fix!) for today's grpc git HEAD:
root#mypi:/home/pi/CODE/grpc# git diff
diff --git a/setup.py b/setup.py
index 1a72c5c668..60b7705cd2 100644
--- a/setup.py
+++ b/setup.py
## -197,6 +197,7 ## ENABLE_DOCUMENTATION_BUILD = _env_bool_value(
def check_linker_need_libatomic():
"""Test if linker on system needs libatomic."""
+ return True
code_test = (b'#include <atomic>\n' +
b'int main() { return std::atomic<int64_t>{}; }')
cxx = os.environ.get('CXX', 'c++')
diff --git a/tools/distrib/python/grpcio_tools/setup.py b/tools/distrib/python/grpcio_tools/setup.py
index 6b842f56b9..8d5f581ac7 100644
--- a/tools/distrib/python/grpcio_tools/setup.py
+++ b/tools/distrib/python/grpcio_tools/setup.py
## -85,6 +85,7 ## BUILD_WITH_STATIC_LIBSTDCXX = _env_bool_value(
def check_linker_need_libatomic():
"""Test if linker on system needs libatomic."""
+ return True
code_test = (b'#include <atomic>\n' +
b'int main() { return std::atomic<int64_t>{}; }')
cxx = os.environ.get('CXX', 'c++')
root#mypi:/home/pi/CODE/grpc#
EDIT:
as a quick test, cygrpc.cpython-39-arm-linux-gnueabihf.so needs to depend on libatomic:
pi#mypi:~/CODE/grpc $ ldd /usr/local/lib/python3.9/dist-packages/grpc/_cython/cygrpc.cpython-39-arm-linux-gnueabihf.so
linux-vdso.so.1 (0xbeef7000)
/usr/lib/arm-linux-gnueabihf/libarmmem-${PLATFORM}.so => /usr/lib/arm-linux-gnueabihf/libarmmem-v7l.so (0xb698b000)
libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb695f000)
libatomic.so.1 => /lib/arm-linux-gnueabihf/libatomic.so.1 (0xb6946000)
libstdc++.so.6 => /lib/arm-linux-gnueabihf/libstdc++.so.6 (0xb67be000)
libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb674f000)
libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb65fb000)
/lib/ld-linux-armhf.so.3 (0xb6fcc000)
libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0xb65ce000)
This works for me on RPI0 + Bullseye + Python3.9:
pip3 uninstall -y grpcio grpcio-tools
sudo apt install -y python3-grpcio python3-grpc-tools
EDIT: Update to gRPC v1.44.0. The issue has been fixed there, see the explanation below in the old answer.
There was a problem with the order of the parameters used by the compiler to compile some test code which result is used to determine whether libatomic needs to be linked or not.
The issue will be fixed with the next release of grpc. If they maintain the same schedule of previous releases it should be v1.44.0 which should come out some time the next month.
In the mean time you can git cherry-pick the proper fix and build grpc yourself
After upgrading build_bazel_rules_nodejs from 0.42.2 to 1.0.1 I get this error:
ERROR: /home/flolu/.cache/bazel/_bazel_flolu/698f7adad10ea020bcdb85216703ce08/external/build_bazel_rules_nodejs/defs.bzl:19:5: Traceback (most recent call
last):
File "/home/flolu/Desktop/minimal-bazel-monorepo/services/server/src/BUILD", line 76
nodejs_image(name = "server", <2 more arguments>)
File "/home/flolu/.cache/bazel/_bazel_flolu/698f7adad10ea020bcdb85216703ce08/external/io_bazel_rules_docker/nodejs/image.bzl", line 112, in nodejs_image
nodejs_binary(name = binary, <2 more arguments>)
File "/home/flolu/.cache/bazel/_bazel_flolu/698f7adad10ea020bcdb85216703ce08/external/build_bazel_rules_nodejs/defs.bzl", line 19, in nodejs_binary
fail(<1 more arguments>)
ERROR: defs.bzl has been removed from build_bazel_rules_nodejs
Please update your load statements to use index.bzl instead.
See https://github.com/bazelbuild/rules_nodejs/wiki#migrating-off-build_bazel_rules_nodejsdefsbzl for help.
ERROR: error loading package 'services/server/src': Package 'services/server/src' contains errors
INFO: Elapsed time: 0.119s
INFO: 0 processes.
FAILED: Build did NOT complete successfully (1 packages loaded)
FAILED: Build did NOT complete successfully (1 packages loaded)
Line 76 in the error refers to this part of the BUILD file:
load("#io_bazel_rules_docker//nodejs:image.bzl", "nodejs_image")
nodejs_image(
name = "server",
data = [":lib"],
entry_point = ":index.ts",
)
But there is no defs.bzl. So I am confused by the error.
So in detail I have upgraded from
http_archive(
name = "build_bazel_rules_nodejs",
sha256 = "16fc00ab0d1e538e88f084272316c0693a2e9007d64f45529b82f6230aedb073",
urls = ["https://github.com/bazelbuild/rules_nodejs/releases/download/0.42.2/rules_nodejs-0.42.2.tar.gz"],
)
to
http_archive(
name = "build_bazel_rules_nodejs",
sha256 = "e1a0d6eb40ec89f61a13a028e7113aa3630247253bcb1406281b627e44395145",
urls = ["https://github.com/bazelbuild/rules_nodejs/releases/download/1.0.1/rules_nodejs-1.0.1.tar.gz"],
)
You can recreate the error by cloning this repo: https://github.com/flolude/minimal-bazel-monorepo/tree/48add7ddcad4d25e361e1c7f7f257cf916a797b2 and running
bazel test //services/server/src:test
There are some breaking changes between those versions of build_bazel_rules_nodejs. Namely the import path this:
load("#build_bazel_rules_nodejs//:defs..bzl", <whatever>)
needs to become this
load("#build_bazel_rules_nodejs//:index.bzl", <whatever>)
You also need to update your io_bazel_rules_docker to at least v0.13.0. From looking at the release notes its the version compatible with 1.0.1 in node. https://github.com/bazelbuild/rules_docker/releases/
Error image and editor configured in UTF8
I am trying to run the following code in python 3.7.5
pi = 3.14159
radius = 15.3
print ('Circle Area is', pi * radius ** 2)
does not run error appears: SyntaxError: Non-ASCII character '\ xc3' in file
adding the command line #! - * - conding: utf8 - * - the following error appears:
/ bin / sh: 0: Illegal option - *
It should be without spaces and also its not conding its coding
# -*- coding: utf-8 -*-
not
#! - * - conding: utf8 - * -
You don't need this line with Python 3. The default encoding is UTF-8 with Python 3+.
Why is read.clipboard() not working on my system?
> library(psych)
> read.table(text=read.clipboard(), sep="\t", header=T, stringsAsFactors=F, strip.white=T)
Error in textConnection(text, encoding = "UTF-8") :
invalid 'text' argument
In addition: Warning message:
In read.table(file("clipboard"), header = TRUE, ...) :
incomplete final line found by readTableHeader on 'clipboard'
> read.table(text=readClipboard(), sep="\t", header=T, stringsAsFactors=F, strip.white=T)
Error in textConnection(text, encoding = "UTF-8") :
could not find function "readClipboard"
The version information:
> packageVersion('psych')
[1] ‘1.4.8.11’
> R.version
_
platform i486-pc-linux-gnu
arch i486
os linux-gnu
system i486, linux-gnu
status
major 3
minor 1.1
year 2014
month 07
day 10
svn rev 66115
language R
version.string R version 3.1.1 (2014-07-10)
nickname Sock it to Me
>
EDIT:
As suggested by #RichardScriven, I used following:
read.table('clipboard', sep="\t", header=T)
If I copy some cells in a spreadsheet and try above command, it does not work. Following is the error:
Error in file(file, "rt") : cannot open the connection
In addition: Warning message:
In file(file, "rt") : clipboard cannot be opened or contains no text
But if I paste first to a text editor, and copy it again from there, then the above command works well.
How can I directly use the data after copying from a spreadsheet?
Following command also shows same problem, works when copied from text editor but not when copied from spreadsheet. I produces same error.
> read.clipboard(sep="\t", header=T)
Error in open.connection(file, "rt") : cannot open the connection
In addition: Warning message:
In open.connection(file, "rt") :
clipboard cannot be opened or contains no text
read.clipboard(sep="\t",header = T)
The above code should work. Also please note that you need to copy [from excel / libreoffice etc] , go to R script and run the command in R. If you perform any other commands in between, this might not work. Hope this helps.