I installed Acrobat reader on Debian 11/Bullseye following instructions from here
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libxml2:i386
Download the Adobe Acrobat Reader (acroread) package here:
ftp://ftp.adobe.com/pub/adobe/reader/unix/9.x/9.5.5/enu/AdbeRdr9.5.5-1_i386linux_enu.deb
Install it as follows:
cd ~/Downloads
sudo dpkg -i AdbeRdr9.5.5-1_i386linux_enu.deb
sudo apt-get -f install
acroread
When I run acroread from the terminal, I get the following error:
opt/Adobe/Reader9/Reader/intellinux/bin/acroread: error while loading shared libraries: libgdk_pixbuf_xlib-2.0.so.0: cannot open shared object file: No such file or directory
I followed instructions in this ubuntu forum and added i386 architecture (which is already done above):
sudo dpkg --add-architecture i386
I understood that I need to install ia32-libs, which in debian is done as per this
dpkg --add-architecture i386
apt-get update
apt-get install libc6:i386
Also followed advice to install libc6-i386 in the same thread.
But still get the error:
/opt/Adobe/Reader9/Reader/intellinux/bin/acroread: error while loading shared libraries: libgdk_pixbuf_xlib-2.0.so.0: cannot open shared object file: No such file or directory
Please advice how to solve and any pointers will be greatly appreciated
I simply had to install the i386 package for libgdk-pixbuf2.0-0:
sudo apt-get install libgdk-pixbuf2.0-0:i386
Now acroread runs fine.
Yeah !
After quite a few trials and errors, this is how i could install acrobat reader on Ubuntu 22.04 :
$ wget ftp://ftp.adobe.com/pub/adobe/reader/unix/9.x/9.5.5/enu/AdbeRdr9.5.5-1_i386linux_enu.deb
$ sudo dpkg -i AdbeRdr9.5.5-1_i386linux_enu.deb
$ sudo apt-get install libgdk-pixbuf2.0-0:i386
At some point i also did
$ sudo dpkg --add-architecture i386
(but not sure that last line is required)
I'm running Debian on Windows 10 (Windows Subsystem for Linux) and installed Rust using the command:
curl https://sh.rustup.rs -sSf | sh
There were no errors in the install, but when I tried to compile with rustc I got the error linker 'cc' not found.
The Linux Rust installer doesn't check for a compiler toolchain, but seems to assume that you've already got a C linker installed! The best solution is to install the tried-and-true gcc toolchain.
sudo apt install build-essential
If you need to target another architecture, install the appropriate toolchain and target the compilation as follows:
rustc --target=my_target_architecture -C linker=target_toolchain_linker my_rustfile.rs
I ran the following 2 commands and it worked.
sudo apt-get update
sudo apt install build-essential
You have to install some dependencies
for Arch Linux sudo pacman -S base-devel
for Ubuntu sudo apt install build-essential
for Centos sudo yum install gcc
for Solus sudo eopkg it -c system.devel
Solution for CentOS:
yum -y install gcc
if u are on wsl2 - ubuntu try to update the pacakges with following cmds:
sudo apt-get update
sudo apt install build-essential
Solution for Solus:
sudo eopkg it -c system.devel
Please do an "Update and Upgrade" before installing setup tools.
You can fix this problem by adding build essential package in linux
sudo apt install -y build-essential
IF ABOVE IS NOT WORKING: cc is included in the "GCC" package. You need to uninstall GCC and then reinstall it if you have accidentally replaced or removed the cc binary.
I ran the following commands in wsl1, it worked
sudo apt-get update
sudo apt install build-essential
I am trying to get a Python script to run on the linux server I'm connected to via ssh. The script uses mysqldb. I have all the other components I need, but when I try to install mySQLdb via setuptools like so:,
python setup.py install
I get the following error report related to the mysql_config command.
sh: mysql_config: command not found
Traceback (most recent call last):
File "setup.py", line 15, in <module>
metadata, options = get_config()
File "/usr/lib/python2.5/MySQL-python-1.2.3/setup_posix.py", line 43, in get_config
libs = mysql_config("libs_r")
File "/usr/lib/python2.5/MySQL-python-1.2.3/setup_posix.py", line 24, in mysql_config
raise EnvironmentError("%s not found" % (mysql_config.path,))
EnvironmentError: mysql_config not found
Has anyone else encountered this error and if so how did you resolve it/what can I do to successfully install mysqldb?
mySQLdb is a python interface for mysql, but it is not mysql itself. And apparently mySQLdb needs the command 'mysql_config', so you need to install that first.
Can you confirm that you did or did not install mysql itself, by running "mysql" from the shell? That should give you a response other than "mysql: command not found".
Which linux distribution are you using? Mysql is pre-packaged for most linux distributions. For example, for debian / ubuntu, installing mysql is as easy as
sudo apt-get install mysql-server
mysql-config is in a different package, which can be installed from (again, assuming debian / ubuntu):
sudo apt-get install libmysqlclient-dev
if you are using mariadb, the drop in replacement for mysql, then run
sudo apt-get install libmariadbclient-dev
Reference:
https://github.com/JudgeGirl/Judge-sender/issues/4#issuecomment-186542797
I was installing python-mysql on Ubuntu 12.04 using
pip install mysql-python
First I had the same problem:
Not Found "mysql_config"
This worked for me
$ sudo apt-get install libmysqlclient-dev
Then I had this problem:
...
_mysql.c:29:20: error fatal: Python.h: No existe el archivo o el directorio
compilación terminada.
error: command 'gcc' failed with exit status 1
Then I tried with
apt-get install python-dev
(If you're using python3, install python3-dev instead.)
And then I was happy :)
pip install mysql-python
Installing collected packages: mysql-python
Running setup.py install for mysql-python
building '_mysql' extension
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -Dversion_info=(1,2,4,'beta',4) -D__version__=1.2.4b4 -I/usr/include/mysql -I/usr/include/python2.7 -c _mysql.c -o build/temp.linux-x86_64-2.7/_mysql.o -DBIG_JOINS=1 -fno-strict-aliasing -g
In file included from _mysql.c:44:0:
/usr/include/mysql/my_config.h:422:0: aviso: se redefinió "HAVE_WCSCOLL" [activado por defecto]
/usr/include/python2.7/pyconfig.h:890:0: nota: esta es la ubicación de la definición previa
gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-x86_64-2.7/_mysql.o -L/usr/lib/x86_64-linux-gnu -lmysqlclient_r -lpthread -lz -lm -lrt -ldl -o build/lib.linux-x86_64-2.7/_mysql.so
Successfully installed mysql-python
Cleaning up...
(Specific to Mac OS X)
I have tried a lot of things, but these set of commands finally worked for me.
Install mysql
brew install mysql
brew unlink mysql
brew install mysql-connector-c
Add the mysql bin folder to PATH
export PATH=/usr/local/Cellar/mysql/8.0.11/bin:$PATH
mkdir /usr/local/Cellar/lib/
Create a symlink
sudo ln -s /usr/local/Cellar/mysql/8.0.11/lib/libmysqlclient.21.dylib /usr/local/Cellar/lib/libmysqlclient.21.dylib
brew reinstall openssl (source)
Finally, install mysql-client
LIBRARY_PATH=$LIBRARY_PATH:/usr/local/opt/openssl/lib/ pip install mysqlclient
Update:
In case this doesn't work, #vinyll suggests to run brew link mysql before step 8.
On Red Hat I had to do
sudo yum install mysql-devel gcc gcc-devel python-devel
sudo easy_install mysql-python
Then it worked.
On python 3.5.2 + any future version
sudo apt-get install libmysqlclient-dev python-dev
The below worked for me on Ubuntu 12.04 LTS:
apt-get install libmysqlclient-dev python-dev
All though it worked, i still went ahead to do the below:
export PATH=$PATH:/usr/local/mysql/bin/
I got the same error while trying to install mysql-python.
This is how I fixed it.
sudo PATH=/usr/local/mysql/bin/:$PATH pip install mysql-python
The problem was that the installer could not find the mysql_config in the default path. Now it can ..and it worked..
15 warnings generated.
clang -bundle -undefined dynamic_lookup -Wl,-F. build/temp.macosx-10.8-intel-2.7/_mysql.o -L/usr/local/mysql/lib -lmysqlclient_r -lz -lm -lmygcc -o build/lib.macosx-10.8-intel-2.7/_mysql.so -arch x86_64
Successfully installed mysql-python
Cleaning up...
Hope this helps.
Thanks.
I fixed this problem with the following steps:
sudo apt-get install libmysqlclient-dev
sudo apt-get install python-dev
sudo python setup.py install
The commands (mysql too) mPATH might be missing.
export PATH=$PATH:/usr/local/mysql/bin/
Step1:-Install Python3 & Python3-dev Both
sudo apt-get install python3 python3-dev
Step2:- Install Python & Mysql Connector
sudo apt-get install libmysqlclient-dev
step3:- Install python mysql client
sudo apt-get install mysqlclient
This will Solve your Problem
The package libmysqlclient-dev is deprecated, so use the below command to fix it.
Package libmysqlclient-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
sudo apt-get install default-libmysqlclient-dev
I think the most convenient way to solve this problem in 2020 is using another python package. We don't need install any other binary software.
Try this
pip install mysql-connector-python
and then
import mysql.connector
mydb = mysql.connector.connect(
host="",
user="",
passwd="",
database=""
)
cursor = mydb.cursor( buffered=True)
cursor.execute('show tables;')
cursor.execute('insert into test values (null, "a",10)')
mydb.commit()
mydb.disconnect()
If you're on macOS and already installed mysql#5.7 via brew install:
brew install mysql-connector-c
brew unlink mysql#5.7
brew link --overwrite --dry-run mysql#5.7 first, to see what symlinks are getting overwritten
brew link --overwrite --force mysql#5.7 to actually overwrite mysql-related symlinks with mysql#5.7
pip install mysqlclient
I fixed it by installing libmysqlclient:
sudo apt-get install libmysqlclient16-dev
In centos 7 this works for me :
yum install mariadb-devel
pip install mysqlclient
The MySQL-python package is using the mysql_config command to learn about the mysql configuration on your host. Your host does not have the mysql_config command.
The MySQL development libraries package (MySQL-devel-xxx) from dev.mysql.com provides this command and the libraries needed by the MySQL-python package. The MySQL-devel packages are found in the download - community server area. The MySQL development library package names start with MySQL-devel and vary based MySQL version and linux platform (e.g. MySQL-devel-5.5.24-1.linux2.6.x86_64.rpm.)
Note that you do not need to install mysql server.
For Alpine Linux:
$ apk add mariadb-dev mariadb-client mariadb-libs
MariaDB is a drop-in replacement for MySQL and became the new standard as of Alpine 3.2. See https://bugs.alpinelinux.org/issues/4264
On my Fedora 23 machine I had to run the following:
sudo dnf install mysql-devel
In CentOS 7 , the following things should be done:
#step1:install mysql
https://dev.mysql.com/doc/mysql-yum-repo-quick-guide/en/
#step2:
sudo yum install mysql-devel
or
sudo yum install mysql-community-devel
I think, following lines can be executed on terminal
sudo ln -s /usr/local/zend/mysql/bin/mysql_config /usr/sbin/
This mysql_config directory is for zend server on MacOSx. You can do it for linux like following lines
sudo ln -s /usr/local/mysql/bin/mysql_config /usr/sbin/
This is default linux mysql directory.
I had this issues and solved if by adding a symlink to mysql_config.
I had installed mysql with homebrew and saw this in the output.
Error: The `brew link` step did not complete successfully
Depending on how you got mysql it will be in different places. In my case /usr/local/Cellar/mysql
Once you know where it is you should be able to ma a symbolic link to where python is looking for it. /usr/local/mysql
This worked for me.
ln -s /usr/local/Cellar/mysql/<< VERSION >>/bin/mysql_config /usr/local/mysql/bin/mysql_config
I had the same problem. I solved it by following this tutorial to install Python with python3-dev on Ubuntu 16.04:
sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get install -y python3-pip
sudo apt-get install build-essential libssl-dev libffi-dev python3-dev
And now you can set up your virtual environment:
sudo apt-get install -y python3-venv
pyvenv my_env
source my_env/bin/activate
also, i fetch the same problem
I fixed this problem with the following steps:
First I run this command
sudo apt-get install libmysqlclient-dev
then I install
pip install mysqlclient==2.1.0
this is worked for me
You need to install the python-dev package:
sudo apt-get install python-dev
sudo apt-get install python-mysqldb
Python 2.5? Sounds like you are using a very old version of Ubuntu Server (Hardy 8.04?) - please confirm which Linux version the server uses.
python-mysql search on ubuntu package database
Some additional info:
From the README of mysql-python -
Red Hat Linux
.............
MySQL-python is pre-packaged in Red Hat Linux 7.x and newer. This
includes Fedora Core and Red Hat Enterprise Linux. You can also
build your own RPM packages as described above.
Debian GNU/Linux
................
Packaged as python-mysqldb_::
# apt-get install python-mysqldb
Or use Synaptic.
.. _python-mysqldb: http://packages.debian.org/python-mysqldb
Ubuntu
......
Same as with Debian.
Footnote: If you really are using a server distribution older than Ubuntu 10.04 then you are out of official support, and should upgrade sooner rather than later.
This method is only for those who know that Mysql is installed but still mysql_config can't be find. This happens if python install can't find mysql_config in your system path, which mostly happens if you have done the installation via .dmg Mac Package or installed at some custom path. The easiest and documented way by MySqlDB is to change the site.cfg. Find the mysql_config which is probably in /usr/local/mysql/bin/ and change the variable namely mysql_config just like below and run the installation again. Don't forget to un-comment it by removing "#"
Change below line
"#mysql_config = /usr/local/bin/mysql_config"
to
"mysql_config = /usr/local/mysql/bin/mysql_config"
depending upon the path in your system.
By the way I used python install after changing the site.cfg
sudo /System/Library/Frameworks/Python.framework/Versions/2.7/bin/python setup.py install
So far, all solutions (Linux) require sudo or root rights to install .
Here is a solution if you do not have root rights and without sudo. (no sudo apt install ...):
Download the .deb file of the libmysqlclient-dev, e.g. from this mirror
Navigate to the downloaded file and run dpkg -x libmysqlclient-dev_<version tag>.deb . This will extract a folder called usr.
Symlink ./usr/bin/mysql_config to somewhere that is found on your $PATH:
ln -s `pwd` /usr/bin/mysql_config FOLDER_IN_YOUR_PATH
It should now be able to find mysql_config
Tested on Ubuntu 18.04.
For macOS Mojave , additional configuration was required, for compilers to find openssl you may need to set:
export LDFLAGS="-L/usr/local/opt/openssl/lib"
export CPPFLAGS="-I/usr/local/opt/openssl/include"
I encountered the same problem, just added the path where *mysql_config* resided to the environment variable PATH and it worked for me.
sudo apt-get build-dep python-mysqldb will install all the dependencies to build the package from PIP/easy_install
I am trying to compile C++ code for ARM architecture. I don't know exactly the full name of processor (waiting for information from some hardware guy), I know only it is some ARM.
The problem which I have.
I use command in order to compile my resource files for ARM architecture:
arm-linux-gnueabi-g++ myApp.cpp -g -Wall -o myApp
and also
arm-linux-gnueabi-gcc myApp.cpp -g -Wall -lstdc++ -o myApp
and gets output:
-bash: arm-linux-gnueabi-g++: command not found
and
-bash: arm-linux-gnueabi-gcc: command not found
In linux which I used I am not sure if there is installed gcc,g++ arm package...
There is:
locate arm-none-linux-gnueabi-
locate arm-linux-gnueabihf-g++
locate arm-linux-gnueabihf-gcc
, there is none:
locate arm-linux-gnueabi-g++
locate arm-linux-gnueabi-gcc
I am not allowed to do some tries and install arm package, because this linux is running on some server to which many developers are attached.
setting PATH in shell:
PATH=$PATH:/opt/eds/x86_64/13.1-2/embedded/ds-5/bin/arm-linux-gnueabihf-g++
or with gcc
doesn't solve the issue.
Setting it in:
~/.bashrc
also doesn't solve the issue because additional problems occurs, I cannot connect to linux server.
Thanks in advance for any help.
for kernel or uboot cross compiling below commands are enough:
sudo apt-get install -y gcc-arm-linux-gnueabihf
sudo apt-get install -y libncurses-dev
sudo apt-get install -y libqt4-dev pkg-config
sudo apt-get install -y u-boot-tools
sudo apt-get install -y device-tree-compiler
but for c++ cross compiling you should install g++ using below command:
sudo apt-get install g++-arm-linux-gnueabihf
I was trying to build B2G for emulator, but I've got an error.
Environment:
Ubuntu 12.04.1 x64
gcc 4.6.3
Install: out/host/linux-x86/bin/traceview host SharedLib:
libGLES_CM_translator
(out/host/linux-x86/obj/lib/libGLES_CM_translator.so) /usr/bin/ld:
cannot find -lGL collect2: ld returned 1 exit status make: *
[out/host/linux-x86/obj/lib/libGLES_CM_translator.so] Error 1
real 1m33.903s user 0m46.539s sys 0m6.088s
Build failed! <
How do I fix it?
Firefox OS build prerequisites
When building on 64-bit Ubuntu, you may find that you need to add symlinks for the 32-bit >versions of libX11.so and libGL.so:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Here you should find the solution to your problem.
#> sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos python-markdown libxml2-utils xsltproc zlib1g-dev:i386
and then:
#> sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
from the Firefox OS wiki (Firefox OS build prerequisites), about building on Ubuntu 12.04 x64:
$ sudo apt-get install autoconf2.13 bison bzip2 ccache curl flex gawk gcc g++ g++-multilib git ia32-libs lib32ncurses5-dev lib32z1-dev libgl1-mesa-dev libx11-dev make
and then,
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so /usr/lib/i386-linux-gnu/libGL.so
I had the exact same error while compiling Android. The following fixed it:
sudo apt-get install libgl1-mesa-dev:i386
I did not have to create any symbolic links or anything, just this simple install