I'm new to Android programming. I was installing the Android studio and it got stuck at one point during installation showing the following message.
So, don't to how to proceed, I searched about it, but couldn't get explanation about this specific condition.
Can someone explain what to do next?
Screenshot:
Note: I'm using Windows 7, Installed JDK 7 before installing Android studio.
Update: I tried to click upon "Setup Proxy" and then just clicked ok without doing anything and it worked, don't know how, but it did.
Try that if any one face the same.
Add the following code to C:\Program Files\Android\Android Studio\bin\idea.properties
disable.android.first.run=true
Just open the file and press Ctrl+F and type run then you will find this run=false, change it to true.
1) click on set up proxy.
2) Select option Auto Detect proxy.
3) Click continue, it will work!!
All the best
I clicked Cancel at this screen and process of setup continued. I saw it on Linux after copying android studio folder from one PC to another. By the way, I started studio not connected to Internet cause I try to be able to work offline.
I just hit this same problem - I was on a VPN.
I tried setting a proxy with 'auto detect proxy settings' but it did not help.
Then I tried disconnecting from the VPN with no proxy set - this resolved the problem for me.
good luck.
You can set the right proxy to solve this problem.
Set proxy ->
Manule...
Https and port
Sometimes,if you use Shadowsocks on your macOS, maybe you will have the same problem.You can turn Shadowsocks off to deal with this problem.
I finally solved the problem by following the Steps:
Add the following code to "C:\Program Files\Android\Android Studio\bin\idea.properties"
Open idea.properties with notepad
Then, enter the code below anywhere on a new line in the file (see attached image)
Code :
disable.android.first.run=true
Save the file
Run the application
Clear your DNS if there is any dns server settings like google, comodo,
symantec etc.
Check your firewall settings if you are using tinywall, zonealarm etc.
If your computer and network connection doesn't have any dns settings and firewall; then check your internet connection maybe there is an update process to slowing down your internet speed. So if there is a process stop or wait for it. And try again. Good luck...
Yet another reason why this can happen is when your time and date settings are not synchronized correctly. I installed android studio inside a virtual machine linux guest that didn't properly synchronize the time with the windows host and as a consequence the above message occured even though my internet connection was working fine.
Related
Everything used to work fine, but I haven't been using Virtual Box for several weeks. Now all of the sudden, I get the following exception when trying to start my Windows 10(32-Bit) VM. Note - Things were working fine several weeks ago. As far as I can tell, I haven't changed anything on my system that would cause this. The exception details are as follow:
VirtualBox - Error In supR3HardenedWinReSpawn (rc=-5640)
Please try reinstalling VirtualBox. where supR3HardenedWinReSpawn
what: 1 VERR_SUP_VP_THREAD_NOT_ALONE (-5640) - Process Verification
Failure: The process has more than one thread
I have been researching this for some time, to avail. Any help would be greatly appreciated.
There is a workaround:
Open VMbox manager
Run your VM with option "Detachable start"
Wait a while and then use "Show" to show the screen
Detachable start option
Show the screen
My setup:
Oracle VM Box 6.0 running on Win10,
VM is Ubuntu 18.04
If you are using vagrant to boot up your Virtual machine, then in most cases the error is due to improper shutdown of the VM. A fix that worked for me is to execute vagrant halt or similar commands multiple times until you have a clean boot.
In case anyone is in the same predicament, I will share what finally fixed my issue. I found a post during my hours and hours of searching that said you have to enable virtualization in BIOS settings. I checked my machine and virtualization was enabled, so I went on searching. At a loss for what to try next, I finally tried turning virtualization off, just to see. No change, but when I went to turn it back on, just as a flook I turned Turbo off, and what do you know - All of the suddent I can start my VM. So the solution, in case it saves someone time:
Uninstall Virtual Box (Latest Version)
Reboot your machine and enter BIOS
Make sure anything with the term 'Virtualization' is turned on
Make sure anything with the term 'Turbo' is turned off
Reboot your machine
Install Virtual Box
Hopefully this saves some poor soul what I had to go through to get this thing working.
METHOD A
If you are using WindHawk, exit it and re-try.
Method B
download previous version from https://www.virtualbox.org/wiki/Download_Old_Builds
install & extensions
Try to re-run your guest OS.
Try to do these steps:
1. Uninstall the VirtualBox program.
2. In your C:\users\\ might have two folders called ".VirtualBox" and "VirtualBox VMs": Delete them
3. Restart your PC
4. Install VirtualBox again
5. Add again your VM
6. It must working fine!
These steps worked for me!
Workaround 1:
Just increase the RAM size from virtual box settings
Right Click on OS image .
Settings->System->MotherBoard
Increase the base memory
Workaround 2:
Change the Paravirtualization Interface from default to none
Right Click on OS image .
Settings->System->Acceleration
Change acceleration from default to none.
The above one's was basically a workaround , which can work in some but not in all.
The best thing would be to reinstall virtual box with latest version which virtual box has tried to rectify the bug and use the same vdi files which was made by Virtual Box .
One of the most common causes that will cause this type of behaviour is a missing driver (VBoxDrv.inf). It’s possible that due to some permission issues, the installation of this crucial driver doesn’t complete during the initial installation. In this case, you can fix the problem by installing the VBoxDrv.inf manually.
1.Fix the directory problem Press Windows key + R to open up a Run dialog box. Inside the text box, type ‘regedit’ and press Enter to open up Registry Editor. When you’re prompted by the User Account Control (UAC), click Yes to grant admin access.
Once you’re inside the Registry Editor, use the left-hand section to navigate to the
following location: HKEY_LOCAL_MACHINE\system\currentcontrolset\services\vboxdrv
After you arrive at the correct location, move over to the right-hand section and
double-click on ImagePath the path associated should be \C:\Program
Files\Oracle\VirtualBox\drivers\vboxdrv\VBoxDrv.sys
if not replace with the above path and click ok.
Install the VBoxDRV.inf OPen location C:\Program Files\Oracle\VirtualBox\drivers\vboxdrv right-click on VBoxDrv.inf and choose Install from the context menu.
Then in cmd run command "sc start vboxdrv"
Restart system. This should work.
When trying to test my app on my device iPhone, I get the following error, I think it's something about registering my device.
/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/iOS/Xamarin.iOS.Common.targets(3,3):
Error MSB6006: "codesign" exited with code 1. (MSB6006)
(multifacturacion.iOS)
The strange thing is that this same device in another mac with xamarin if it works and with the same project.
If someone can help me with this, I have several days looking for a solution.
This went away for me after I cleaned the solution in Visual Studio.
(yes this is a complete answer, there are no citations, this is just what I did to fix it).
Open the info.plist and check "Automatic Provisioning".
Thing is, I am having this error regularily. I am working with a local developer certificate created on my Mac using a free Apple Id, but without a paid Apple Developer Membership. I am using a Windows based devloper workstation and program in Visual Studio 2019 with Xamarin.Forms 4.0. To get local deployment working again, I need to visit the general settings on my iPhone and remove my trusted account from the list of developer apps under device management which basically not only removes the account but also the app from the device.
Then I need to remove all occurances of the corresponding certificate on my Mac within the Keychain Utility and even the mobileprovision file on my harddrive located somewhere beneath my user directory.
Now I have to Start XCode on my Mac, open the project, I am working on and have it automatically "repair" the signing certificate which basically creates a new one and registers it in the Keychain. The moment I run the app from XCode, I need to always allow keychain access and on my iPhone I can see the account appear in the general settings again which I have to manually trust... again.
THEN I can open the corresponding project in my Visual Studio on my Windows Developer Workstation, rebuild and deploy the app and get no errors.
Without being able to say why, it could happen even the next time I try to build and deploy the app, that this error happens again... this is very (!) inconvenient and I didn't find any real solution for it yet...
remove your certificates from keychains and add again, close Info.plist open and fill de information on bundle singing option, that works for me, remember link your device with you provisioning.
The answer of Mephisztoe worked for me, except that I am working on Windows and you find the scheme-property in the project-settings and not in the plist-file.
Furthermore be sure that you installed fastlane (just open Extras > Options > Xamarin > Apple-Accounts and click on "install fastlane") and added your Apple-ID there.
I also deleted the certificate with the keychain-utility. That's why I had to reenter my password on the mac as I clicked on build on my windows machine.
With these steps done I can finally work again...
If the certificate of Apple developer is expired, you can get the error like "codesign", so you need to create a new certificate in Apple Developer site (https://developer.apple.com/account/), then download & install to your computer.
I have been struggling with the same issue for several days, the error came only when I tried to publish the app from my Windows VS 2019. It had no further details of why it was behaving like this.
What I changed was:
Created New Publishing Profile & Certificates
Instead of selecting Release in Configuration as suggested in this Microsoft article, I selected AppStore from the configuration.
Tried to recreate the archive and it was completed successfully.
Now when I tried to publish it, I encountered few error messages, I fixed them and submitted the app again. It worked fine.
For me, the issue was that there was a popup asking for a password on the network-attached Mac. I had to VNC into it and enter the password.
For some reason the first time I did this (and chose "always allow"), it failed again with this error, but the second time I ran it succeeded.
You'll want to make sure to have an app-specific password ready if you haven't already generated one. I have no idea why, but it prompts you for one in VS.
I am using Android studio 3.0.1 and that is working really very fine. I have upto date SDK version and I have upto date gradle version.
Everything seems to be perfect now. But I am now facing a problem and I have no idea why it is occurring.
Problem:
Whenever I try to access webservices my emulator/AVD never access that. Also I am unable to access the internet using emulator browser. Even it is unable to open the Google.com page.
I have searched this problem but non of them is working for me. I have checked the Ip configrations and that is totally fine. I am not using any specific DNS settings and I am not using any special VPN network. My network adapter is just fine. I am using Windows 7
Please help me if anyone of you having solution of this problem. Thanks in advance.
Well there are couple of cases i want to discuss. And that is totally what I dig out after trying for hours.
I have same Issue. and for this I have seen that there was nothing wrong with the AVD i was creating again and again. But I was using Windows 10 and using android studio over it.
The problem was the virtual networks. I got them created for the Blue stacks and GeneyMotion emulator. They sets the IP and the DNS them self for virtual network
SO if you are having virtual network set their IP to defaults. OR disable them at all. Also disable other networks except the one you are using.
and after doing this all. Create the new AVD and check if that starts working.
I was getting this error when trying to install Atom using the installer.
I tried to run as Administrator but ever having the same error.
So I opened the Setup Log and found this line in many places of the log:
Failed to load local releases, starting from scratch: System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\david\AppData\Local\slack\packages\RELEASES'.
To resolve this problem, I simply tried to change the AppData folder properties, unchecking the Attribute "Read-Only" and applying to subfolders.
After that, I could install the application and everything is working well.
I don't know whether what I did was the best solution, but it fixed my problem :)
Hope this help someone
If you have anti-virus installed on your system. Please disable it and try it once. Hope this will work for you because this worked for me like a charm.
One more thing you can check that your windows update service is also running. You check it out in Task Manager ->
So do this thing and check it out.
This is a permission related issue. Could be you don't have permission to write, in that case run as Administrator.
Right Click on the installer and select Run As Administrator.
If you still have the issue, disable your antivirus, defender or whatever you have to protect your PC from threats. Once Installed Enable it BACK
if you have Dropbox opened, close it.
You can try this:
open control panel
Windows firewall
click allow an app or feature through windows firewall
In that at right bottom click allow another app
Browse the downloaded atom.exe file and click open and click ok
first uninstall or disable the antivirus. In my case Guardian net secure was handling all the things of windows firewall. so i was not able to allow the app through windows firewall. therefore, it is necessary to uninstall these. then restart your laptop.
after restarting open control panel. go to windows firewall. on left top you will see
allow an app or feature through windows firewall . click on it. dialog box appears. click on change settings. at bottom click allow another app. then browse the downloaded file atom.exe. then install it
What worked for me was closing Slack and terminating any of it's processes in Task Manager.
This was what worked for me (Windows 11):
Go to properties>compatability on the installation file. Run the troubleshooter for compatibility, and it shoul provide a solution, wait, and if it works, select that it did so, and you’re all done.
To resolve this problem, I simply tried to change the AppData folder properties, unchecking the Attribute "Read-Only" and applying to subfolders.
After that, I could install the application and everything is working well.
This worked for me on Windows 11 home version.
Hope this helps
I managed to install by finding an older version.
I have tried to "check update" in android studio
Help>Check for Updates
but it says
Connection failed. Please check your network connection and try again
But my Internet is working fine. .I've also tried to switch off my firewall. Is this bug of google service?
Update : Whenever updates | installations are failed, start the android studio as administrator.
Old Answer:
This is possibly a bug of Android Studio.
The following steps may help to fix this issue:
Open configuration
Select Settings
Select HTTP Proxy
Set to use no proxy
Restart Andriod studio
start the android studio as administrator. that helps me in android studio whenever updates/installations are failed.
Maybe u can try: Settings -> System settings -> HTTP Proxy -> auto-detect proxy settings.
I had the same problem. To fix I had to manually download a newer version from https://developer.android.com/studio/.
I'm currently running Android Studio 3.2.1 and it updates fine.
Also, in Preferences > Appearance & Behavior > System Settings > HTTP Proxy make sure that Auto-detect proxy settings is checked.
Check Screenshot
It doesn't seem to be a bug. I can confirm that the update worked perfectly fine on my home network. When on my office network, trying to update gives a connection error.
Must have something to do with the firewall...or some service that's not Checked to handle connections based on domain/home/public policies.
I tried no proxy option at both office and home network.
At home, "Check Update" works fine, but getting the error you mentioned with office network.
To avoid this error, you need to provide the proxy details from your office IT administrator.
It may be an also problem for VPN connected users. Try to disconnect and check for updates it will work. It worked for me