I am getting error when i am executing following command in ec2 machine
sudo /etc/init.d/aerospike start
I need aerospike engine in my ec2 machine for test purpose.
I used
wget -O aerospike.tgz 'http://aerospike.com/download/server/latest/artifact/ubuntu12 to get the file and installed it as the doc says.
I just happened to see this question. Have you resolved it? Did you get the proper version of GLibC installed?
If not, it looks like you are using the 3.5.3 community version, correct?
I tested in AWS on Ubuntu 14.4 M3 large, and it installed and started fine:
ubuntu#ip-172-31-23-5:~$ wget -O aerospike.tgz 'http://aerospike.com/download/server/latest/artifact/ubuntu12
> ^C
ubuntu#ip-172-31-23-5:~$ wget -O aerospike.tgz 'http://aerospike.com/download/server/latest/artifact/ubuntu12'
--2015-03-09 21:29:58-- http://aerospike.com/download/server/latest/artifact/ubuntu12
Resolving aerospike.com (aerospike.com)... 184.168.221.29
Connecting to aerospike.com (aerospike.com)|184.168.221.29|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: /download/server/latest/artifact/ubuntu12 [following]
--2015-03-09 21:29:59-- http://aerospike.com/download/server/latest/artifact/ubuntu12
Connecting to aerospike.com (aerospike.com)|184.168.221.29|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: /download/server/latest/artifact/ubuntu12 [following]
--2015-03-09 21:29:59-- http://aerospike.com/download/server/latest/artifact/ubuntu12
Connecting to aerospike.com (aerospike.com)|184.168.221.29|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://www.aerospike.com/download/server/latest/artifact/ubuntu12[following]
--2015-03-09 21:29:59-- http://www.aerospike.com/download/server/latest/artifact/ubuntu12
Resolving www.aerospike.com (www.aerospike.com)... 54.215.231.2, 54.183.249.41
Connecting to www.aerospike.com (www.aerospike.com)|54.215.231.2|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://www.aerospike.com/cgi/latest.php?/download/server/latest/artifact/ubuntu12 [following]
--2015-03-09 21:29:59-- http://www.aerospike.com/cgi/latest.php?/download/server/latest/artifact/ubuntu12
Reusing existing connection to www.aerospike.com:80.
HTTP request sent, awaiting response... 302 Found
Location: /download/server/3.5.3/artifact/ubuntu12 [following]
--2015-03-09 21:29:59-- http://www.aerospike.com/download/server/3.5.3/artifact/ubuntu12
Reusing existing connection to www.aerospike.com:80.
HTTP request sent, awaiting response... 302 Found
Location: http://www.aerospike.com/cgi/artifact.php?/download/server/3.5.3/artifact/ubuntu12 [following]
--2015-03-09 21:29:59-- http://www.aerospike.com/cgi/artifact.php?/download/server/3.5.3/artifact/ubuntu12
Reusing existing connection to www.aerospike.com:80.
HTTP request sent, awaiting response... 302 Found
Location: http://www.aerospike.com/artifacts/aerospike-server-community/3.5.3/aerospike-server-community-3.5.3... [following]
--2015-03-09 21:29:59-- http://www.aerospike.com/artifacts/aerospike-server-community/3.5.3/aerospike-server-community-3.5.3...
Reusing existing connection to www.aerospike.com:80.
HTTP request sent, awaiting response... 200 OK
Length: 10518026 (10M) [application/x-gzip]
Saving to: ‘aerospike.tgz’
100%[=========================================================================================================================================================================================>] 10,518,026 17.6MB/s in 0.6s
2015-03-09 21:30:00 (17.6 MB/s) - ‘aerospike.tgz’ saved [10518026/10518026]
ubuntu#ip-172-31-23-5:~$ ls -ltrh
total 11M
-rw-rw-r-- 1 ubuntu ubuntu 11M Mar 3 23:57 aerospike.tgz
ubuntu#ip-172-31-23-5:~$ tar xvf aerospike.tgz
aerospike-server-community-3.5.3-ubuntu12.04/
aerospike-server-community-3.5.3-ubuntu12.04/asinstall
aerospike-server-community-3.5.3-ubuntu12.04/aerospike-server-community-3.5.3.ubuntu12.04.x86_64.deb
aerospike-server-community-3.5.3-ubuntu12.04/aerospike-tools-3.5.2.ubuntu12.04.x86_64.deb
aerospike-server-community-3.5.3-ubuntu12.04/LICENSE
aerospike-server-community-3.5.3-ubuntu12.04/SHA256SUMS
ubuntu#ip-172-31-23-5:~$ cd aerospike-server-community-3.5.3-ubuntu12.04/
ubuntu#ip-172-31-23-5:~/aerospike-server-community-3.5.3-ubuntu12.04$ ls -ltrh
total 11M
-rw-rw-r-- 1 ubuntu ubuntu 8.1K Dec 5 20:24 LICENSE
-rwxrwxr-x 1 ubuntu ubuntu 1.1K Dec 5 20:24 asinstall
-rw-r--r-- 1 ubuntu ubuntu 3.7M Feb 23 23:38 aerospike-tools-3.5.2.ubuntu12.04.x86_64.deb
-rw-rw-r-- 1 ubuntu ubuntu 563 Feb 23 23:43 SHA256SUMS
-rw-r--r-- 1 ubuntu ubuntu 6.6M Feb 23 23:43 aerospike-server-community-3.5.3.ubuntu12.04.x86_64.deb
ubuntu#ip-172-31-23-5:~/aerospike-server-community-3.5.3-ubuntu12.04$ sudo ./asinstall
Installing tools
dpkg -i aerospike-tools-3.5.2.ubuntu12.04.x86_64.deb
Selecting previously unselected package aerospike-tools.
(Reading database ... 51108 files and directories currently installed.)
Preparing to unpack aerospike-tools-3.5.2.ubuntu12.04.x86_64.deb ...
Unpacking aerospike-tools (3.5.2) ...
Setting up aerospike-tools (3.5.2) ...
Installing /opt/aerospike
Writing /usr/local/lib/python2.7/dist-packages/aerospike.pth
Adding python path /opt/aerospike/lib/python
Installing server
dpkg -i aerospike-server-community-3.5.3.ubuntu12.04.x86_64.deb
Selecting previously unselected package aerospike-server-community.
(Reading database ... 51160 files and directories currently installed.)
Preparing to unpack aerospike-server-community-3.5.3.ubuntu12.04.x86_64.deb ...
Unpacking aerospike-server-community (3.5.3-1) ...
Setting up aerospike-server-community (3.5.3-1) ...
Processing triggers for ureadahead (0.100.0-16) ...
ubuntu#ip-172-31-23-5:~/aerospike-server-community-3.5.3-ubuntu12.04$ sudo /etc/init.d/aerospike start
* Start aerospike: asd kernel.shmall too low, setting to 4G pages = 16TB
kernel.shmall = 4294967296
kernel.shmmax too low, setting to 1GB
kernel.shmmax = 1073741824
[ OK ]
ubuntu#ip-172-31-23-5:~/aerospike-server-community-3.5.3-ubuntu12.04$ sudo /etc/init.d/aerospike status
* asd is running
ubuntu#ip-172-31-23-5:~/aerospike-server-community-3.5.3-ubuntu12.04$
Let us know if the issue persists.
Hope this helps,
-DM
You may be also to install latest glibc if its an older version.
sudo apt-get update
sudo apt-get install libc6
Related
I have installed the jenkins as per their documentation. And then when i try to update jenkins its giving these wierd errors. The ports 443 and 80 are open. Can any assist on this issues.
Logs:
[root#server ~]# cat /etc/yum.repos.d/jenkins.repo
[jenkins]
name=Jenkins-stable
baseurl=http://pkg.jenkins.io/redhat-stable
gpgcheck=1
[root#server ~]# cat /etc/yum.conf
[main]
gpgcheck=1
installonly_limit=3
clean_requirements_on_remove=True
best=True
skip_if_unavailable=False
ip_resolve=4
[root#mcdefrapl008 ~]#
[root#server ~]# yum update
Jenkins-stable 0.0 B/s | 0 B 00:00
Errors during downloading metadata for repository 'jenkins':
- Curl error (56): Failure when receiving data from the peer for http://pkg.jenkins.io/redhat-stable/repodata/repomd.xml [Recv fa
ilure: Connection reset by peer]
Error: Failed to download metadata for repo 'jenkins': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors
were tried
[root#server ~]# curl http://pkg.jenkins.io/redhat-stable/repodata/repomd.xml -v
* Trying 151.101.2.133...
* TCP_NODELAY set
* Connected to pkg.jenkins.io (151.101.2.133) port 80 (#0)
> GET /redhat-stable/repodata/repomd.xml HTTP/1.1
> Host: pkg.jenkins.io
> User-Agent: curl/7.61.1
> Accept: */*
>
* Recv failure: Connection reset by peer
* Closing connection 0
curl: (56) Recv failure: Connection reset by peer
[root#mcdefrapl008 ~]#
Just to mention, when i open the url in the browser it is redirecting to https.
yum do not redirect to https automatically. So set in your repo https and try again.
[jenkins]
name=Jenkins-stable
baseurl=https://pkg.jenkins.io/redhat-stable
gpgcheck=1
!wget https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp=sharing
!mv view?usp=sharing HorizonZero.png
# Downloading lena.bmp
!wget https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp=sharing
!mv view?usp=sharing lena.bmp
``````````````````````````````````````````````````````````````````
**the image link for horizon.png is actually**
https://drive.google.com/file/d/1gGltsV4k7z3akTqB726FWzi5tUnNSCqf/view?usp=sharing
but !mv i added from view
`````````````````````````````````````````````````````````````````````````
**the output should be like this**
--2020-08-01 19:30:57-- https://drive.google.com/uc?id=1Djfm4PqE7Su4WqEdZKiGL-8HtrbVBuMm
Resolving drive.google.com (drive.google.com)... 74.125.203.139, 74.125.203.113, 74.125.203.100, ...
Connecting to drive.google.com (drive.google.com)|74.125.203.139|:443... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://doc-08-40-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/91pcoqqtp058dfpuoqspvbr6s66n7q9t/1596310200000/05356688754188258246/*/1Djfm4PqE7Su4WqEdZKiGL-8HtrbVBuMm [following]
Warning: wildcards not supported in HTTP.
--2020-08-01 19:30:57-- https://doc-08-40-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/91pcoqqtp058dfpuoqspvbr6s66n7q9t/1596310200000/05356688754188258246/*/1Djfm4PqE7Su4WqEdZKiGL-8HtrbVBuMm
Resolving doc-08-40-docs.googleusercontent.com (doc-08-40-docs.googleusercontent.com)... 74.125.203.132, 2404:6800:4008:c03::84
Connecting to doc-08-40-docs.googleusercontent.com (doc-08-40-docs.googleusercontent.com)|74.125.203.132|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 111636 (109K) [image/png]
Saving to: ‘uc?id=1Djfm4PqE7Su4WqEdZKiGL-8HtrbVBuMm’
uc?id=1Djfm4PqE7Su4 100%[===================>] 109.02K --.-KB/s in 0.002s
2020-08-01 19:30:58 (57.7 MB/s) - ‘uc?id=1Djfm4PqE7Su4WqEdZKiGL-8HtrbVBuMm’ saved [111636/111636]
--2020-08-01 19:31:07-- https://drive.google.com/uc?id=19xZhsjs_r0tLwtu_Wl5DB5rG26dhw069
Resolving drive.google.com (drive.google.com)... 74.125.204.139, 74.125.204.113, 74.125.204.100, ...
Connecting to drive.google.com (drive.google.com)|74.125.204.139|:443... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://doc-10-40-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/frtrtg5v8nd6vf0ff6cs1dh3jvqv28ui/1596310200000/05356688754188258246/*/19xZhsjs_r0tLwtu_Wl5DB5rG26dhw069 [following]
Warning: wildcards not supported in HTTP.
--2020-08-01 19:31:07-- https://doc-10-40-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/frtrtg5v8nd6vf0ff6cs1dh3jvqv28ui/1596310200000/05356688754188258246/*/19xZhsjs_r0tLwtu_Wl5DB5rG26dhw069
Resolving doc-10-40-docs.googleusercontent.com (doc-10-40-docs.googleusercontent.com)... 74.125.203.132, 2404:6800:4008:c03::84
Connecting to doc-10-40-docs.googleusercontent.com (doc-10-40-docs.googleusercontent.com)|74.125.203.132|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 263222 (257K) [image/bmp] **it is recognized........................**
Saving to: ‘uc?id=19xZhsjs_r0tLwtu_Wl5DB5rG26dhw069’
uc?id=19xZhsjs_r0tL 100%[===================>] 257.05K --.-KB/s in 0.003s
2020-08-01 19:31:08 (79.6 MB/s) - ‘uc?id=19xZhsjs_r0tLwtu_Wl5DB5rG26dhw069’ saved [263222/263222]
````````````````````````````````````````````````````````````
**but my output I coming like this plz help**
--2021-06-01 07:17:27-- https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp=sharing
Resolving drive.google.com (drive.google.com)... 74.125.31.138, 74.125.31.102, 74.125.31.113, ...
Connecting to drive.google.com (drive.google.com)|74.125.31.138|:443... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://accounts.google.com/ServiceLogin?service=wise&passive=1209600&continue=https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp%3Dsharing&followup=https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp%3Dsharing [following]
--2021-06-01 07:17:27-- https://accounts.google.com/ServiceLogin?service=wise&passive=1209600&continue=https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp%3Dsharing&followup=https://drive.google.com/file/d/1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z/view?usp%3Dsharing
Resolving accounts.google.com (accounts.google.com)... 108.177.12.84, 2607:f8b0:400c:c0b::54
Connecting to accounts.google.com (accounts.google.com)|108.177.12.84|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html] not detected...............?????
Saving to: ‘view?usp=sharing’
view?usp=sharing [ <=> ] 65.35K --.-KB/s in 0.001s
2021-06-01 07:17:27 (104 MB/s) - ‘view?usp=sharing’ saved [66920]
--2021-06-01 07:17:27-- https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp=sharing
Resolving drive.google.com (drive.google.com)... 173.194.217.101, 173.194.217.113, 173.194.217.139, ...
Connecting to drive.google.com (drive.google.com)|173.194.217.101|:443... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://accounts.google.com/ServiceLogin?service=wise&passive=1209600&continue=https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp%3Dsharing&followup=https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp%3Dsharing [following]
--2021-06-01 07:17:27-- https://accounts.google.com/ServiceLogin?service=wise&passive=1209600&continue=https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp%3Dsharing&followup=https://drive.google.com/file/d/1sOxv4LHEuGNnZJEg7gl2ZiehdKU4ojjF/view?usp%3Dsharing
Resolving accounts.google.com (accounts.google.com)... 74.125.31.84, 2607:f8b0:400c:c03::54
Connecting to accounts.google.com (accounts.google.com)|74.125.31.84|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html] ### not detected...............?????
Saving to: ‘view?usp=sharing’
view?usp=sharing [ <=> ] 65.40K --.-KB/s in 0.002s
2021-06-01 07:17:27 (26.4 MB/s) - ‘view?usp=sharing’ saved [66972]
**the problem here I the image is not getting recognized in google colobatory it is coming [text/html] but it should come [png /jpg/bmp]please help to get over this problm**
The following command should address your need:
!wget --load-cookies /tmp/cookies.txt "https://docs.google.com/uc?export=download&confirm=$(wget --quiet --save-cookies /tmp/cookies.txt --keep-session-cookies --no-check-certificate 'https://docs.google.com/uc?export=download&id=1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z' -O- | sed -rn 's/.*confirm=([0-9A-Za-z_]+).*/\1\n/p')&id=1BeeBFUY6BS-H66NMcx3hF1rwE3Yi3p3z" -O HorizonZero.png && rm -rf /tmp/cookies.txt
If you are wondering what it does, you see it's configuring the download with Google Drive file id (which I have taken from your question itself), setting HorizonZero.png as an output file, using cookies.txt file as specified by --keep-session-cookie to hold cookie information during the download (it's useful if your file is big), enabled auto-confirmation for the download, also skipping the certificate check by --no-check-certificate, and removed cookies.txt at the end after the download is over.
Trying to install freeradius package on Debian 10 buster and it fails.
$ sudo apt install freeradius
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Suggested packages:
freeradius-krb5 freeradius-ldap freeradius-mysql freeradius-postgresql freeradius-python3
The following NEW packages will be installed:
freeradius
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 555 kB of archives.
After this operation, 2230 kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org/debian sid/main amd64 freeradius amd64 3.0.21+dfsg-2+b2 [555 kB]
Fetched 555 kB in 0s (2753 kB/s)
Selecting previously unselected package freeradius.
(Reading database ... 140557 files and directories currently installed.)
Preparing to unpack .../freeradius_3.0.21+dfsg-2+b2_amd64.deb ...
Unpacking freeradius (3.0.21+dfsg-2+b2) ...
Setting up freeradius (3.0.21+dfsg-2+b2) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
install: invalid user ‘freerad’
dpkg: error processing package freeradius (--configure):
installed freeradius package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
freeradius
E: Sub-process /usr/bin/dpkg returned an error code (1)
install: invalid user ‘freerad’
Apparently it seems as if there's something wrong with the freerad user which doesn't exist?
Typing / checking inside /etc/passwd file learly shows there's no such user
$ cat /etc/passwd | grep freer*
Checking the syslog shows:
Feb 10 00:38:45 server-1 systemd[1]: freeradius.service: Scheduled restart job, restart counter is at 277.
Feb 10 00:38:45 server-1 freeradius[10918]: FreeRADIUS Version 3.0.21
Feb 10 00:38:45 server-1 freeradius[10918]: Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
Feb 10 00:38:45 server-1 freeradius[10918]: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
Feb 10 00:38:45 server-1 freeradius[10918]: PARTICULAR PURPOSE
Feb 10 00:38:45 server-1 freeradius[10918]: You may redistribute copies of FreeRADIUS under the terms of the
Feb 10 00:38:45 server-1 freeradius[10918]: GNU General Public License
Feb 10 00:38:45 server-1 freeradius[10918]: For more information about these matters, see the file named COPYRIGHT
Feb 10 00:38:45 server-1 freeradius[10918]: Errors reading /etc/freeradius/3.0: Permission denied
Feb 10 00:38:45 server-1 systemd[1]: freeradius.service: Control process exited, code=exited, status=1/FAILURE
Feb 10 00:38:45 server-1 systemd[1]: freeradius.service: Failed with result 'exit-code'.
Tried a**smarting this by adding the user manually with the command adduser freeradius
and then tried re-installing:
$ sudo apt install freeradius
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
freeradius is already the newest version (3.0.21+dfsg-2+b2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up freeradius (3.0.21+dfsg-2+b2) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
chown: cannot access '/etc/freeradius': No such file or directory
dpkg: error processing package freeradius (--configure):
installed freeradius package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
freeradius
E: Sub-process /usr/bin/dpkg returned an error code (1)
now it fails prompting a new error: chown: cannot access '/etc/freeradius': No such file or directory
Tried purging / removing / clean / cache deleting / rebooting and then restarting the installation but it keeps reappearing.
Let me know if there's more info I can provide in manner to help you help me.
Cheers.
when removing freeradius (either by apt remove freeradius or apt purge freeradius) mind that config files are a seperate package called freeradius-config
so to completely wipe freeradius and do a reinstall do:
apt purge freeradius freeradius-config
rm -rf /etc/freeradius/
apt install freeradius
After installation of freeradius, add the following lines at the end of the client.conf file to set the access of your client:
#vi /etc/freeradius/3.0/clients.conf
For Example :
client SWITCH-01 {
ipaddr = 192.168.0.10
secret = kamisama123
}
client LINUX-01 {
ipaddr = 192.168.0.20
secret = vegeto123
}
In our example, we are adding 2 client devices, both devices will offer a login promt to authenticate on freeradius server database.
Now, locate and edit the freeradius users configuration file:
Example:
# vi /etc/freeradius/3.0/users
Adding Your Username And Password Like below:
freerad1 Cleartext-Password := "freerad1234"
freerad2 Cleartext-Password := "freerad2123"
Now, Restart freeradius server :
# service freeradius restart
Now, test your radius server configuration file :
#freeradius -CX
you can Test your radius authentication locally on the Radius server using the following commands:
# radtest freerad1 freerad1234 localhost 0 testing123
Here is an example of a successful radius authentication:
Sent Access-Request Id 151 from 0.0.0.0:34857 to 127.0.0.1:1812 length 75
User-Name = "freerad1"
User-Password = "freerad1234"
NAS-IP-Address = 172.31.41.98
NAS-Port = 0
Message-Authenticator = 0x00
Cleartext-Password = "freerad1234"
Received Access-Accept Id 151 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
We are using the freerad1 username and the freerad1234 password to authenticate the user account.
The testing123 is a default device password included in the clients.conf file.
Now, go to the Linux server included on the clients.conf configuration file as LINUX-01.
Install the freeradius-utils package.
# apt-get install freeradius-utils
Test your radius authentication remotely on the Linux server (LINUX-01 OR YOUR CLIENT YOU ARE ADDED ON client.conf) using the following commands:
# radtest freerad freerad1234 192.168.0.50 0 vegeto123
** Congratulations, Your Freeradius server is on the service **
I'm using VaultPress to take my WordPress blog's backup
https://dashboard.vaultpress.com/
After clicking the download backup button, this site sends me a link from where I can download. When I click on this link, it starts downloading my backup in the browser, and that's perfect. But I'm trying to download this in my Ubuntu system using wget or curl but no success till now. Here is what the download URL looks like:
https://dashboard.vaultpress.com/12345/restore/?step=4&job=12345678&check=.
eric#eric:~# wget https://dashboard.vaultpress.com/12345/restore/?step=4&job=12345678&check=<somehashedvalue>
[5] 2229
[6] 2230
[6] Done job=12345678
eric#eric:~# --2015-02-08 02:25:07-- https://dashboard.vaultpress.com/12345/restore/?step=4
Resolving dashboard.vaultpress.com (dashboard.vaultpress.com)... 192.0.96.249, 192.0.96.250
Connecting to dashboard.vaultpress.com (dashboard.vaultpress.com)|192.0.96.249|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: / [following]
--2015-02-08 02:25:09-- https://dashboard.vaultpress.com/
Reusing existing connection to dashboard.vaultpress.com:443.
HTTP request sent, awaiting response... 302 Found
Location: /account/login/ [following]
--2015-02-08 02:25:09-- https://dashboard.vaultpress.com/account/login/
Reusing existing connection to dashboard.vaultpress.com:443.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html?step=4’
[ <=> ] 7,709 --.-K/s in 0s
2015-02-08 02:25:09 (20.9 MB/s) - ‘index.html?step=4’ saved [7709]
PS: The file size is almost 1 GB.
Then I used user/pass:
eric#eric:~# wget --user <myusername> --password <mypassword> https://aboveurl
I even used --ask-password:
eric#eric:~# wget --user <myusername> --ask-password https://aboveurl
But in this case, instead of asking password it completes the action and then asks for the password in another shell (I don't know the exact term), something like this:
eric#eric:~# wget --user <myusername> --ask-password https://dashboard.vaultpress.com/12345/restore/?step=4&job=12345678&check=<hashedvalue>
[1] 1979
[2] 1980
eric#eric:~# Password for user ‘<myusername>’: <mypassword-here>
<mypassword>: command not found
And then finally, I gave a try to curl:
eric#eric:~# curl -u <myusername>:<mypassword> https://dashboard.vaultpress.com/12345/restore/?step=4&job=12345678&check=<hashedvalue>
[5] 2010
[6] 2011
eric#eric:~#
I don't know what's happening? What are those [5] 2010 [6] 2011 or [5] 2229
This solution is also not working:
wget with authentication
The ampersands in your URL make Linux create new processes running in the background. The PID is printed out behind the number in the square brackets.
Write the URL within double quotes and try again:
wget "https://dashboard.vaultpress.com/12345/restore/?step=4&job=12345678&check=<somehashedvalue>"
I got that error when trying to use cabal update
below were the results of cabal update -v3
Downloading the latest package list from hackage.haskell.org
Sending:
GET /packages/archive/00-index.tar.gz HTTP/1.1
Host: hackage.haskell.org
User-Agent: cabal-install/1.16.0.2
Creating new connection to hackage.haskell.org
Received:
HTTP/1.1 301 Moved Permanently
Server: nginx/1.6.2
Date: Thu, 13 Nov 2014 00:14:21 GMT
Content-Type: text/plain; charset=UTF-8
Transfer-Encoding: chunked
Connection: keep-alive
Location: /packages/index.tar.gz
Content-Length: 0
301 - redirect
Redirecting to http://hackage.haskell.org/packages/index.tar.gz ...
Sending:
GET /packages/index.tar.gz HTTP/1.1
Host: hackage.haskell.org
User-Agent: cabal-install/1.16.0.2
Recovering connection to hackage.haskell.org
Received:
HTTP/1.1 200 OK
Server: nginx/1.6.2
Date: Thu, 13 Nov 2014 00:14:21 GMT
Content-Type: application/x-gzip
Content-Length: 8090775
Connection: keep-alive
Content-MD5: bae2f93619ba845eff2f3bd544714c2c
ETag: "bae2f93619ba845eff2f3bd544714c2c"
Last-Modified: Wed, 12 Nov 2014 23:04:10 GMT
Downloaded to /root/.cabal/packages/hackage.haskell.org/00-index.tar.gz
Updating the index cache file...
cabal update: /usr/hs/tools/cabal-1.16.0.2 failure (return code=-9)
haskell was installed from justhub
Does anyone have any idea why it failed? I looked for the return code of -9 but there's no information.
Update
Thanks Reid (and user5402),
Checked the dmesg and that's definitely because it's out of memory
Out of memory: Kill process 32626 (cabal-1.16.0.2) score 711 or sacrifice child
Will upgrade the machine and try again, not sure how much would cabal-install need though, I'm on a 512MB RAM system
The value -9 probably means a child process died to SIGKILL, which in turn was probably sent by the OOM killer. Checking the output of dmesg can confirm this. If that's the case, one needs to turn up the RAM available. (based on this comment).
512Mb of RAM is not enough. Instead of upgrading machine you can enable swap.
On ubuntu do following steps:
sudo fallocate -l 4G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
It will add you 4G swap file, that will prevent killing from OS.