Below is my script to check root path integrity, to ensure there is no vulnerability in PATH variable.
#! /bin/bash
if [ ""`echo $PATH | /bin/grep :: `"" != """" ]; then
echo "Empty Directory in PATH (::)"
fi
if [ ""`echo $PATH | /bin/grep :$`"" != """" ]; then echo ""Trailing : in PATH""
fi
p=`echo $PATH | /bin/sed -e 's/::/:/' -e 's/:$//' -e 's/:/ /g'`
set -- $p
while [ ""$1"" != """" ]; do
if [ ""$1"" = ""."" ]; then
echo ""PATH contains ."" shift
continue
fi
if [ -d $1 ]; then
dirperm=`/bin/ls -ldH $1 | /bin/cut -f1 -d"" ""`
if [ `echo $dirperm | /bin/cut -c6 ` != ""-"" ]; then
echo ""Group Write permission set on directory $1""
fi
if [ `echo $dirperm | /bin/cut -c9 ` != ""-"" ]; then
echo ""Other Write permission set on directory $1""
fi
dirown=`ls -ldH $1 | awk '{print $3}'`
if [ ""$dirown"" != ""root"" ] ; then
echo $1 is not owned by root
fi
else
echo $1 is not a directory
fi
shift
done
The script works fine for me, and shows all vulnerable paths defined in the PATH variable. I want to also automate the process of correctly setting the PATH variable based on the above result. Any quick method to do that.
For example, on my Linux box, the script gives output as:
/usr/bin/X11 is not a directory
/root/bin is not a directory
whereas my PATH variable have these defined,and so I want to have a delete mechanism, to remove them from PATH variable of root. lot of lengthy ideas coming in mind. But searching for a quick and "not so complex" method please.
No offense but your code is completely broken. Your using quotes in a… creative way, yet in a completely wrong way. Your code is unfortunately subject to pathname expansions and word splitting. And it's really a shame to have an insecure code to “secure” your PATH.
One strategy is to (safely!) split your PATH variable into an array, and scan each entry. Splitting is done like so:
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
See my mock which and How to split a string on a delimiter answers.
With this command you'll have a nice array path_ary that contains each fields of PATH.
You can then check whether there's an empty field, or a . field or a relative path in there:
for ((i=0;i<${#path_ary[#]};++i)); do
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
fi
done
You can add more elif's, e.g., to check whether the entry is not a valid directory:
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
Now, to check for the permission and ownership, unfortunately, there are no pure Bash ways nor portable ways of proceeding. But parsing ls is very likely not a good idea. stat can work, but is known to have different behaviors on different platforms. So you'll have to experiment with what works for you. Here's an example that works with GNU stat on Linux:
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}")
You'll want to check that owner_id is 0 (note that it's okay to have a dir path that is not owned by root; for example, I have /home/gniourf/bin and that's fine!). perms is in octal and you can easily check for g+w or o+w with bit tests:
elif [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
elif ((0022&8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
Note the use of 8#$perms to force Bash to understand perms as an octal number.
Now, to remove them, you can unset path_ary[i] when one of these tests is triggered, and then put all the remaining back in PATH:
else
# In the else statement, the corresponding entry is good
unset_it=false
fi
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
of course, you'll have unset_it=true as the first instruction of the loop.
And to put everything back into PATH:
IFS=: eval 'PATH="${path_ary[*]}"'
I know that some will cry out loud that eval is evil, but this is a canonical (and safe!) way to join array elements in Bash (observe the single quotes).
Finally, the corresponding function could look like:
clean_path() {
local path_ary perms owner_id unset_it
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
for ((i=0;i<${#path_ary[#]};++i)); do
unset_it=true
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}" 2>/dev/null)
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
elif [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
elif ((0022 & 8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
else
# In the else statement, the corresponding entry is good
unset_it=false
fi
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
done
IFS=: eval 'PATH="${path_ary[*]}"'
}
This design, with if/elif/.../else/fi is good for this simple task but can get awkward to use for more involved tests. For example, observe that we had to call stat early before the tests so that the information is available later in the tests, before we even checked that we're dealing with a directory.
The design may be changed by using a kind of spaghetti awfulness as follows:
for ((oneblock=1;oneblock--;)); do
# This block is only executed once
# You can exit this block with break at any moment
done
It's usually much better to use a function instead of this, and return from the function. But because in the following I'm also going to check for multiple entries, I'll need to have a lookup table (associative array), and it's weird to have an independent function that uses an associative array that's defined somewhere else…
clean_path() {
local path_ary perms owner_id unset_it oneblock
local -A lookup
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
for ((i=0;i<${#path_ary[#]};++i)); do
unset_it=true
for ((oneblock=1;oneblock--;)); do
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
break
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
break
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
break
elif [[ ${lookup[${path_ary[i]}]} ]]; then
printf 'Warning: the entry %s appears multiple times\n' "$i"
break
fi
# Here I'm sure I'm dealing with a directory
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}")
if [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
break
elif ((0022 & 8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
break
fi
# All tests passed, will keep it
lookup[${path_ary[i]}]=1
unset_it=false
done
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
done
IFS=: eval 'PATH="${path_ary[*]}"'
}
All this is really safe regarding spaces and glob characters and newlines inside PATH; the only thing I don't really like is the use of the external (and non-portable) stat command.
I'd recommend you get a good book on Bash shell scripting. It looks like you learned Bash from looking at 30 year old system shell scripts and by hacking away. This isn't a terrible thing. In fact, it shows initiative and great logic skills. Unfortunately, it leads you down to some really bad code.
If statements
In the original Bourne shell the [ was a command. In fact, /bin/[ was a hard link to /bin/test. The test command was a way to test certain aspects of a file. For example test -e $file would return a 0 if the $file was executable and a 1 if it wasn't.
The if merely took the command after it, and would run the then clause if that command returned an exit code of zero, or the else clause (if it exists) if the exit code wasn't zero.
These two are the same:
if test -e $file
then
echo "$file is executable"
fi
if [ -e $file ]
then
echo "$file is executable"
fi
The important idea is that [ is merely a system command. You don't need these with the if:
if grep -q "foo" $file
then
echo "Found 'foo' in $file"
fi
Note that I am simply running grep and if grep is successful, I'm echoing my statement. No [ ... ] are necessary.
A shortcut to the if is to use the list operators && and ||. For example:
grep -q "foo" $file && echo "I found 'foo' in $file"
is the same as the above if statement.
Never parse ls
You should never parse the ls command. You should use stat instead. stat gets you all the information in the command, but in an easily parseable form.
[ ... ] vs. [[ ... ]]
As I mentioned earlier, in the original Bourne shell, [ was a system command. In Kornshell, it was an internal command, and Bash carried it over too.
The problem with [ ... ] is that the shell would first interpolate the command before the test was performed. Thus, it was vulnerable to all sorts of shell issues. The Kornshell introduced [[ ... ]] as an alternative to the [ ... ] and Bash uses it too.
The [[ ... ]] allows Kornshell and Bash to evaluate the arguments before the shell interpolates the command. For example:
foo="this is a test"
bar="test this is"
[ $foo = $bar ] && echo "'$foo' and '$bar' are equal."
[[ $foo = $bar ]] && echo "'$foo' and '$bar' are equal."
In the [ ... ] test, the shell interpolates first which means that it becomes [ this is a test = test this is ] and that's not valid. In [[ ... ]] the arguments are evaluated first, thus the shell understands it's a test between $foo and $bar. Then, the values of $foo and $bar are interpolated. That works.
For loops and $IFS
There's a shell variable called $IFS that sets how read and for loops parse their arguments. Normally, it's set to space/tab/NL, but you can modify this. Since each PATH argument is separated by :, you can set IFS=:", and use a for loop to parse your $PATH.
The <<< Redirection
The <<< allows you to take a shell variable and pass it as STDIN to the command. These both more or less do the same thing:
statement="This contains the word 'foo'"
echo "$statement" | sed 's/foo/bar/'
statement="This contains the word 'foo'"
sed 's/foo/bar/'<<<$statement
Mathematics in the Shell
Using ((...)) allows you to use math and one of the math function is masking. I use masks to determine whether certain bits are set in the permission.
For example, if my directory permission is 0755 and I and it against 0022, I can see if user read and write permissions are set. Note the leading zeros. That's important, so that these are interpreted as octal values.
Here's your program rewritten using the above:
#! /bin/bash
grep -q "::" <<<"$PATH" && echo "Empty directory in PATH ('::')."
grep -q ":$" <<<$PATH && "PATH has trailing ':'"
#
# Fix Path Issues
#
path=$(sed -e 's/::/:/g' -e 's/:$//'<<<$PATH);
OLDIFS="$IFS"
IFS=":"
for directory in $PATH
do
[[ $directory == "." ]] && echo "Path contains '.'."
[[ ! -d "$directory" ]] && echo "'$directory' isn't a directory in path."
mode=$(stat -L -f %04Lp "$directory") # Differs from system to system
[[ $(stat -L -f %u "$directory") -eq 0 ]] && echo "Directory '$directory' owned by root"
((mode & 0022)) && echo "Group or Other write permission is set on '$directory'."
done
I'm not 100% sure what you want to do or mean about PATH Vulnerabilities. I don't know why you care whether a directory is owned by root, and if an entry in the $PATH is not a directory, it won't affect the $PATH. However, one thing I would test for is to make sure all directories in your $PATH are absolute paths.
[[ $directory != /* ]] && echo "Directory '$directory' is a relative path"
The following could do the whole work and also removes duplicate entries
export PATH="$(perl -e 'print join(q{:}, grep{ -d && !((stat(_))[2]&022) && !$seen{$_}++ } split/:/, $ENV{PATH})')"
I like #kobame's answer but if you don't like the perl-dependency you can do something similar to:
$ cat path.sh
#!/bin/bash
PATH="/root/bin:/tmp/groupwrite:/tmp/otherwrite:/usr/bin:/usr/sbin"
echo "${PATH}"
OIFS=$IFS
IFS=:
for path in ${PATH}; do
[ -d "${path}" ] || continue
paths=( "${paths[#]}" "${path}" )
done
while read -r stat path; do
[ "${stat:5:1}${stat:8:1}" = '--' ] || continue
newpath="${newpath}:${path}"
done < <(stat -c "%A:%n" "${paths[#]}" 2>/dev/null)
IFS=${OIFS}
PATH=${newpath#:}
echo "${PATH}"
$ ./path.sh
/root/bin:/tmp/groupwrite:/tmp/otherwrite:/usr/bin:/usr/sbin
/usr/bin:/usr/sbin
Note that this is not portable due to stat not being portable but it will work on Linux (and Cygwin). For this to work on BSD systems you will have to adapt the format string, other Unices don't ship with stat at all OOTB (Solaris, for example).
It doesn't remove duplicates or directories not owned by root either but that can easily be added. The latter only requires the loop to be adapted slightly so that stat also returns the owner's username:
while read -r stat owner path; do
[ "${owner}${stat:5:1}${stat:8:1}" = 'root--' ] || continue
newpath="${newpath}:${path}"
done < <(stat -c "%A:%U:%n" "${paths[#]}" 2>/dev/null)
Related
I want to add the third parameter that will be changing files name from upper to lower OR lower to upper but in this third parameter I want to specify what file's name must be changed? What's wrong with this script? Thank you in advance.
#!/bin/bash
if test "$1" = "lower" && test "$2" = "upper"
then
for file in *; do
if [ $0 != "$file" ] && [ $0 != "./$file" ]; then
mv "$file" "$(echo $file | tr [:lower:] [:upper:])";
fi
fi
done
elif test "$1" = "upper" && test "$2" = "lower"
then
for file in *; do
if [ $0 != "$file" ] && [ $0 != "./$file" ]; then
mv "$file" "$(echo $file | tr [:upper:] [:lower:])";
fi
done
fi
if [ "$1" = "lower" ] && [ "$2" = "upper" ] && [ "$3" = "$file" ];
then
for file in * ; do
if [ $0 != "$file" ] && [ $0 != "./$file" ]; then
mv "$file" "$(echo $file | tr [:lower:] [:upper:])";
fi
done
fi
If I am guessing correctly what you want, try
#!/bin/bash
case $1:$2 in
upper:lower | lower:upper ) ;;
*) echo "Syntax: $0 upper|lower lower|upper files ..." >&2; exit 1;;
esac
from=$1
to=$2
shift; shift
for file; do
mv "$file" "$(echo "$file" | tr "[:$from:]" "[:$to:]")"
done
This has the distinct advantage that it allows more than three arguments, where the first two specify the operation to perform.
Notice also how we take care to always quote strings which contain a file name. See also When to wrap quotes around a shell variable?
The above script should in fact also work with /bin/sh; we do not use any Bash-only features so it should run under any POSIX sh.
However, a much better design would probably be to use an option to decide what mapping to apply, and simply accept a (possibly empty) list of options and a list of file name arguments. Then you can use Bash built-in parameter expansion, too. Case conversion parameter expansion operations are available in Bash 4 only, though.
#!/bin/bash
op=',,'
# XXX FIXME: do proper option parsing
case $1 in -u) op='^^'; shift;; esac
for file; do
eval mv "\$file" "\${file$op}"
done
This converts to lowercase by default, and switches to uppercase instead if you pass in -u before the file names.
In both of these scripts, we use for file as a shorthand for for file in "$#" i.e. we loop over the (remaining) command-line arguments. Perhaps this is the detail you were looking for.
Forgive me if I grossly misunderstand, but I think you may have misunderstood how argument passing works.
The named/numbered arguments represent the values you pass in on the command line in their ordinal positions. Each can theoretically have any value that can by stuck in a string. You don't need a third parameter, just a third value.
Let's try a sample.
#! /bin/env bash
me=${0#*/} # strip the path
use="
$me { upper | lower } file
changes the NAME of the file given to be all upper or all lower case.
"
# check for correct arguments
case $# in
2) : exactly 2 arguments passed - this is correct ;;
*) echo "Incorrect usage - $me requires exactly 2 arguments $use" >&2
exit 1 ;;
esac
declare -l lower action # these variables will downcase anything put in them
declare -u upper # this one will upcase anything in it
declare newname # create a target variable with unspecified case
action="$1" # stored the *lowercased* 1st argument passed as $action
case $action in # passed argument has been lowercased for simpler checking
upper) upper="$2" # store *uppercased* 2nd arg.
newname="$upper" # newname is now uppercase.
;;
lower) lower="$2" # store *lowercased* 2nd arg.
newname="$lower" # newname is now lowercase.
;;
*) echo "Incorrect usage - $me requires 2nd arg to be 'upper' or 'lower' $use" >&2
exit 1 ;;
esac
if [[ -e "$2" ]] # confirm the argument exists
then echo "Renaming $2 -> $newname:"
ls -l "$2"
echo " -> "
mv "$2" "$newname" # rename the file
ls -l "$newname"
else echo "'$2' does not exist. $use" >&2
exit 1
fi
First of all there is indentation problem with this script check first if condition done should be coming before fi
Below is the correct.
if test "$1" = "lower" && test "$2" = "upper"
then
for file in *; do
if [ $0 != "$file" ] && [ $0 != "./$file" ]; then
mv "$file" "$(echo $file | tr [:lower:] [:upper:])";
fi
done
fi
Secondly the question you asked:
#/bin/bash -xe
[ $# -ne 3 ] && echo "Usage: {lower} {upper} {fileName} " && exit 1
if [ "$1" = "lower" ] && [ "$2" = "upper" ] && [ -f "$3" ];
then
mv "$3" "$(echo $3 | tr [:lower:] [:upper:])";
fi
Hope this helps.
I tried to implement in bash some code which output would be similar to the "tree" command in the terminal.
Here it is:
listContent() {
local file
for file in "$1"/*; do
if [ -d $file ]; then
countSpaces $file
echo $?"Directory: $file"
listContent "$file"
elif [ -f $file ]; then
countSpaces $file
echo $?"File: $file"
fi
done
}
countSpaces() {
local space=" "
for (( i=0; i<${#$1}; i++ )); do
if [ ${file:$i:1} = "/" ]; then
space = space + space
return space
done
}
listContent "$1"
Running the script I give: ./scriptName.sh directoryName
where scriptName is my script and directoryName is the argument which is the name of the directory from which the code should start.
I would like to see the output like this:
Directory: Bash/Test1Dir
File: Bash/Test1Dir/Test1Doc.txt
Directory: Bash/Test2Dir
Directory: Bash/Test2Dir/InsideTest2DirDir
File: Bash/Test2Dir/insideTest2DirDoc.txt
File: Bash/test.sh
But I have some troubles in completing this code. Could someone help me figure it out why it isn't working and what should I change?
Will be grateful.
A correct and efficient implementation might look like:
listContent() {
local dir=${1:-.} whitespacePrefix=$2 file
for file in "$dir"/*; do
[ -e "$file" ] || [ -L "$file" ] || continue
if [ -d "$file" ]; then
printf '%sDirectory %q\n' "$whitespacePrefix" "${file##*/}"
listContent "$file" "${whitespacePrefix} "
else
printf '%sFile %q\n' "$whitespacePrefix" "${file##*/}"
fi
done
}
Note:
Instead of counting spaces, we use the call stack to track the amount of whitespace, appending on each recursive call. This avoids needing to count the number of /s in each name.
We quote all parameter expansions, except in one of the limited number of contexts where string-splitting and glob expansions are implicitly avoided.
We avoid attempts to use $? for anything other than its intended purpose of tracking numeric exit status.
We use printf %q whenever uncontrolled data (such as a filename) is present, to ensure that even malicious names (containing newlines, cursor-control characters, etc) are printed unambiguously.
if you want a visual representation without the Directory and File leaders, then the following is a simple one-liner (wrapped in a shell function).
treef() (
[ -d "$1" ] && { dir="$1"; shift; } || dir='.'
find "$dir" "$#" | sed -e 's#/#|#g;s/^\.|//;s/[^|][^|]*|/ |/g;/^[. |]*$/d'
)
I am looking for a script that recursively lists all files using export and read link and by not using ls options. I have tried the following code, but it does not fulfill the purpose. Please can you help.
My Code-
#!/bin/bash
for i in `find . -print|cut -d"/" -f2`
do
if [ -d $i ]
then
echo "Hello"
else
cd $i
echo *
fi
done
Here's a simple recursive function which does a directory listing:
list_dir() {
local i # do not use a global variable in our for loop
# ...note that 'local' is not POSIX sh, but even ash
# and dash support it.
[[ -n $1 ]] || set -- . # if no parameter is passed, default to '.'
for i in "$1"/*; do # look at directory contents
if [ -d "$i" ]; then # if our content is a directory...
list_dir "$i" # ...then recurse.
else # if our content is not a directory...
echo "Found a file: $i" # ...then list it.
fi
done
}
Alternately, if by "recurse", you just mean that you want the listing to be recursive, and can accept your code not doing any recursion itself:
#!/bin/bash
# ^-- we use non-POSIX features here, so shebang must not be #!/bin/sh
while IFS='' read -r -d '' filename; do
if [ -f "$filename" ]; then
echo "Found a file: $filename"
fi
done < <(find . -print0)
Doing this safely calls for using -print0, so that names are separated by NULs (the only character which cannot exist in a filename; newlines within names are valid.
I need some help to write a script for the following scenario.
The requirement is, based on the number of configuration files(*.cfg) inside a given directory, I need load all the configuration file names with out the file extension into an array. If there is only one configuration file in the directory, then array will be assigned the value "" (not the name of the only available configuration file)
I am trying to do this using logical operators. This is what i have tried so far.
[`ls *.cfg |wc -l`] || code_to_initialize_array;
My problem here is that, how do I integrate the case where i have only one configuration file.
Short code:
#!/bin/bash
array=(*.cfg)
array=("${array[#]%.cfg}")
[ ${#array[#]} -eq 1 ] && array=""
#!/bin/bash
config=(*.cfg) #glob instead ls usage
num=${#config[#]}
case $num in
0)
echo "No config file"
;;
1)
echo "Only one config file"
;;
*)
code_to_initialize_array
;;
esac
You can have this example script for your requirement. It's detailed and variable names are long but you could have your own customizations. Using readarray is safer than A=($(...)) since it doesn't depend on IFS and is not subject to pathname expansion.
#!/bin/bash
DIR=/path/to/somewhere
readarray -t FILES < <(compgen -G "${DIR%/}/*.cfg") ## Store matches to array.
FILES_COUNT=${#FILES[#]} ## Match count.
FILES_NAMES=("${FILES[#]##*/}") ## No directory parts.
FILES_NAMES_WITHOUT_CFG=("${FILES_NAMES[#]%.cfg}") ## No .cfg extension.
if [[ FILES_COUNT -gt 0 ]]; then
printf "File: %s\n" "${FILES[#]}"
printf "Name: %s\n" "${FILES_NAMES[#]}"
printf "Name (no .cfg): %s\n" "${FILES_NAMES_WITHOUT_CFG[#]}"
printf "Total: %d\n" "$FILES_COUNT"
fi
Note that each entry has the same index number. So ${FILES[1]} is ${FILES_NAMES[1]} and also ${FILES_NAMES_WITHOUT_CFG[1]}. Entries begin with index 0.
You can also have other details through this:
if [[ FILES_COUNT -gt 0 ]]; then
for I in "${!FILES[#]}"; do
printf "File: %s\n" "${FILES[I]}"
printf "Name: %s\n" "${FILES_NAMES[I]}"
printf "Name (no .sh): %s\n" "${FILES_NAMES_WITHOUT_CFG[I]}"
printf "Index number: $I\n\n"
done
printf "Total: %d\n" "$FILES_COUNT"
fi
I've always liked abusing a for loop for a situation like this.
for x in *.cfg; do
[[ -f $x ]] && code_to_initialize_array
break
The explicit break means the loop iterates only once, no matter how many .cfg files you have. If you have none, *.cfg will be treated literally, so the [[ -f $x ]] checks if the "first" cfg file actually exists before trying to run code_to_initialize_array.
I found similar questions but not in Linux/Bash
I want my script to create a file with a given name (via user input) but add number at the end if filename already exists.
Example:
$ create somefile
Created "somefile.ext"
$ create somefile
Created "somefile-2.ext"
The following script can help you. You should not be running several copies of the script at the same time to avoid race condition.
name=somefile
if [[ -e $name.ext || -L $name.ext ]] ; then
i=0
while [[ -e $name-$i.ext || -L $name-$i.ext ]] ; do
let i++
done
name=$name-$i
fi
touch -- "$name".ext
Easier:
touch file`ls file* | wc -l`.ext
You'll get:
$ ls file*
file0.ext file1.ext file2.ext file3.ext file4.ext file5.ext file6.ext
To avoid the race conditions:
name=some-file
n=
set -o noclobber
until
file=$name${n:+-$n}.ext
{ command exec 3> "$file"; } 2> /dev/null
do
((n++))
done
printf 'File is "%s"\n' "$file"
echo some text in it >&3
And in addition, you have the file open for writing on fd 3.
With bash-4.4+, you can make it a function like:
create() { # fd base [suffix [max]]]
local fd="$1" base="$2" suffix="${3-}" max="${4-}"
local n= file
local - # ash-style local scoping of options in 4.4+
set -o noclobber
REPLY=
until
file=$base${n:+-$n}$suffix
eval 'command exec '"$fd"'> "$file"' 2> /dev/null
do
((n++))
((max > 0 && n > max)) && return 1
done
REPLY=$file
}
To be used for instance as:
create 3 somefile .ext || exit
printf 'File: "%s"\n' "$REPLY"
echo something >&3
exec 3>&- # close the file
The max value can be used to guard against infinite loops when the files can't be created for other reason than noclobber.
Note that noclobber only applies to the > operator, not >> nor <>.
Remaining race condition
Actually, noclobber does not remove the race condition in all cases. It only prevents clobbering regular files (not other types of files, so that cmd > /dev/null for instance doesn't fail) and has a race condition itself in most shells.
The shell first does a stat(2) on the file to check if it's a regular file or not (fifo, directory, device...). Only if the file doesn't exist (yet) or is a regular file does 3> "$file" use the O_EXCL flag to guarantee not clobbering the file.
So if there's a fifo or device file by that name, it will be used (provided it can be open in write-only), and a regular file may be clobbered if it gets created as a replacement for a fifo/device/directory... in between that stat(2) and open(2) without O_EXCL!
Changing the
{ command exec 3> "$file"; } 2> /dev/null
to
[ ! -e "$file" ] && { command exec 3> "$file"; } 2> /dev/null
Would avoid using an already existing non-regular file, but not address the race condition.
Now, that's only really a concern in the face of a malicious adversary that would want to make you overwrite an arbitrary file on the file system. It does remove the race condition in the normal case of two instances of the same script running at the same time. So, in that, it's better than approaches that only check for file existence beforehand with [ -e "$file" ].
For a working version without race condition at all, you could use the zsh shell instead of bash which has a raw interface to open() as the sysopen builtin in the zsh/system module:
zmodload zsh/system
name=some-file
n=
until
file=$name${n:+-$n}.ext
sysopen -w -o excl -u 3 -- "$file" 2> /dev/null
do
((n++))
done
printf 'File is "%s"\n' "$file"
echo some text in it >&3
Try something like this
name=somefile
path=$(dirname "$name")
filename=$(basename "$name")
extension="${filename##*.}"
filename="${filename%.*}"
if [[ -e $path/$filename.$extension ]] ; then
i=2
while [[ -e $path/$filename-$i.$extension ]] ; do
let i++
done
filename=$filename-$i
fi
target=$path/$filename.$extension
Use touch or whatever you want instead of echo:
echo file$((`ls file* | sed -n 's/file\([0-9]*\)/\1/p' | sort -rh | head -n 1`+1))
Parts of expression explained:
list files by pattern: ls file*
take only number part in each line: sed -n 's/file\([0-9]*\)/\1/p'
apply reverse human sort: sort -rh
take only first line (i.e. max value): head -n 1
combine all in pipe and increment (full expression above)
Try something like this (untested, but you get the idea):
filename=$1
# If file doesn't exist, create it
if [[ ! -f $filename ]]; then
touch $filename
echo "Created \"$filename\""
exit 0
fi
# If file already exists, find a similar filename that is not yet taken
digit=1
while true; do
temp_name=$filename-$digit
if [[ ! -f $temp_name ]]; then
touch $temp_name
echo "Created \"$temp_name\""
exit 0
fi
digit=$(($digit + 1))
done
Depending on what you're doing, replace the calls to touch with whatever code is needed to create the files that you are working with.
This is a much better method I've used for creating directories incrementally.
It could be adjusted for filename too.
LAST_SOLUTION=$(echo $(ls -d SOLUTION_[[:digit:]][[:digit:]][[:digit:]][[:digit:]] 2> /dev/null) | awk '{ print $(NF) }')
if [ -n "$LAST_SOLUTION" ] ; then
mkdir SOLUTION_$(printf "%04d\n" $(expr ${LAST_SOLUTION: -4} + 1))
else
mkdir SOLUTION_0001
fi
A simple repackaging of choroba's answer as a generalized function:
autoincr() {
f="$1"
ext=""
# Extract the file extension (if any), with preceeding '.'
[[ "$f" == *.* ]] && ext=".${f##*.}"
if [[ -e "$f" ]] ; then
i=1
f="${f%.*}";
while [[ -e "${f}_${i}${ext}" ]]; do
let i++
done
f="${f}_${i}${ext}"
fi
echo "$f"
}
touch "$(autoincr "somefile.ext")"
without looping and not use regex or shell expr.
last=$(ls $1* | tail -n1)
last_wo_ext=$($last | basename $last .ext)
n=$(echo $last_wo_ext | rev | cut -d - -f 1 | rev)
if [ x$n = x ]; then
n=2
else
n=$((n + 1))
fi
echo $1-$n.ext
more simple without extension and exception of "-1".
n=$(ls $1* | tail -n1 | rev | cut -d - -f 1 | rev)
n=$((n + 1))
echo $1-$n.ext