Hi I add a new user in my linux mint. But after login that user, some feature losted in the terminal. Such as I cannot use up-arrow and down-arrow in the keyborad to show the previous command. Also there is no color in for different file. Someone could tell me the way to configure these setting? or some link. Thanks
The bash history is user-dependent. You can change the bash settings in the .bashrc file in your home directory, or you can tweak the file /etc/bash.bashrc.
Related
How to modify terminal prompt on Linux (specifically Ubuntu), so that prompt is in new row after username#host-path?
Like on the picture below (git bash terminal on win7):
Here is detailed page that should help you
https://help.ubuntu.com/community/CustomizingBashPrompt
And to directly answer your question:
In your .bashrc file, located in your home directory, find any entry that ends with \$ and add a newline to it so that it would end with \n\$.
i have some trouble with my terminal in linux.
When i start my terminal i have this line:
This is the Z Shell configuration function for new users,
zsh-newuser-install.
You are seeing this message because you have no zsh startup files
(the files .zshenv, .zprofile, .zshrc, .zlogin in the directory
~). This function can help you with a few settings that should
make your use of the shell easier.
You can:
(q) Quit and do nothing. The function will be run again next time.
(0) Exit, creating the file ~/.zshrc containing just a comment.
That will prevent this function being run again.
(1) Continue to the main menu.
(2) Populate your ~/.zshrc with the configuration recommended
by the system administrator and exit (you will need to edit
the file by hand, if so desired).
--- Type one of the keys in parentheses ---
how i run zsh ?
And when i press "2" i have this :
cp: not writing through dangling symlink '/home/thomas/.zshrc'
zsh-newuser-install:source:982: no such file or directory: /home/thomas/.zshrc
thx for the help.
zsh is an uncommon choice on linux. If your account is on somebody else's system, ask the sysadmin to fix it up for you. If you installed it, look at .zshrc with ls -l : the 'dangling symlink' suggests it exists but points to somewhere else (that suggests an admin or distro install) and the place it is pointing to does not exist.
If you can identify where it should be pointing (I'm assuming now that this is a distro install), fix the symlink. Otherwise ask on a distro list or forum.
I am new to linux.
I am trying to set up arcanist.
I am done with git clone and adding the path in environment variable, however I am confused on how to set up the tab completion for arcanist commands.
In the arcanist user guide it says that you need to add source /path/to/arcanist/resources/shell/bash-completion to your .bashrc, .profile files.
What are these files and how can I edit them to work with arcanist with the tab completion.
The .bashrc, found in your home directory, is the configuration file for that user for bash.
There is a global bashrc usually located in /etc/bashrc.
The difference to .profile is that the .bashrc is executed every time you start a terminal (bash) while .profile only once when you use a login shell.
The command source loads everything that is inside the file you use with that command and treats it as if you wrote those commands in the .bashrc yourself. I guess in /path/to/arcanist/resources/shell/bash-completion are aliases/functions/etc. which enable tab-completion with arcanist.
Edit: for bash, the profile file is usually called .bash_profile.
After lot of googling and asking people, I finally did it.
First of all I had to export the path where my arcanist code from the github has been cloned in the ~/.bashsrc file(in bold below)
export PATH="$PATH:$HOME/.rvm/bin:$HOME/arcanist/bin/"
After this command, I copied the function which was present in the /arcanist/resources/shell/bash-completion into the bashrc file
And then I closed and open the terminal and bingo I was able to get arc and it's command as auto completion on striking tab.
Thanks ap0 for the comments.
I was going over this article and it states in step 3
Add the following to your .bashrc (or the appropriate startup file for your shell) To use it immediately, be sure to type “source .bashrc”
Any idea on how I could know what my startup file is ? I am using putty ?
Once you use putty to SSH into your server, you can run "ls -al .bashrc" and it should show you the file, edit this with an editor you know, if none, then use vi like this "vi .bashrc".
Go to where you need to edit the file and type in "i" to put vi in Insert mode. Next type in your text. Once you are done press the escape button and ":wq", no quotes for the i or :wq.
Next you can source it by typing "source .bashrc" and the setting you added should be part of your BASH shell environment now.
The .bashrc is a file which is called by bash before on each start of a new interactive shell. The file can be used to setup the environment, export variables, create aliases and functions and more...
There are usually multiple instances of that file. One per system and one per user to allow system wide configuration but also customization by users ( users bashrc will be sourced after the system wide bashrc and can overwrite things). I suggest to add the lines to your user's bashrc first. The file is located in your home folder. Type:
vi $HOME/.bashrc
in order to edit the file. If you aren't familiar with the vi editor you can choose an editor of your choice like nano, mcedit or even a GUI text editor, but mind that a GUI editor's file dialog may hide the file because it's name starts with a .
Once you managed to edit the file, start a new connection or simply type
source $HOME/.bashrc
in order to parse the file
A path which will work with any bash shell regardless of operating system (macOS/Linux/BSD etc.) is:
~/.bashrc
check your home directory ...because it exists in user's home directory.
check /home/username/ on your terminal if you are using RHEL or CentOS.
.bashrc and .bash_profile are bash config files (bash shell script) that bash runs(execute) whenever it is started interactively. It initializes an interactive (non-login) shell session and the config is read from these files $HOME/.bashrc
.bashrc is a standard hidden file located in your home directory.It determines the behaviour of interactive shells.
.bashrc runs on every interactive shell launch.If you say: $bash
For login shells, the config is read from these files:
/etc/profile (always sourced)
$HOME/.bash_profile (the rest of these files are checked in order until one is found,then no other are read)
$HOME/.bash_login
$HOME/.profile
For example: I added an echo to my .bashrc and .bash_profile files and whenever I called bash or bash -l command in terminal it showed me the echo.
I'm having some problems working with my development environment. Specifically, after I invoke the screen utility from within Cygwin I lose the ability to do tab completion. Before I invoke screen however tab completion works just fine.
I messed around with setting different values for the TERM env variable (VT100, xterm etc) but without success. It must be something trivial but I have no idea anymore. Does StackOverflow have any suggestions for me?
when you issue 'screen' from inside cygwin it might put you in another shell like /bin/sh instead of /bin/bash (and bash is where you're getting the tab completion from).
To fix the problem you could edit your .screenrc file (found in your home directory) and add in this line:
shell bash
Then try running screen again and you should see tab completion work within this new window.
The problem is that bash needs to be run as a login shell in order to have tab completion in the default cygwin setup. If you run bash in a cygwin bash you won’t have tab completion either. To set screen to run bash in login mode, add this line to your ~/.screenrc file:
shell -bash
I had a similar problem with git autocompletion not working when using screen on a linux machine, but wasn't due to a different shell. I fixed it using this question: Git autocomplete in screen on mac os and doing the following:
Get the git autocompletion script
curl https://raw.github.com/git/git/master/contrib/completion/git-completion.bash -OL
why would you want that hanging around?
mv git-completion.bash .git-completion.bash
add this line to your ./bashrc
source ~/.git-completion.bash
Then in your terminal
source ~/.bashrc
That worked for me.
(I imagine after three years you've probably solved your problem, but I hope this helps someone else)