I have never written a script, so bear with me. What I need to do, is make two scripts that I can click on from the desktop, will both open their own terminal (And stay open until I manually close it) and run the given lines.
For the first one, I have to manually run this:
cd home/pi/PiBits/ServoBlaster/user
sudo ./servod
For the second:
cd ~/scratchClient
python crs/scratchClient.py -c servoblaster
How would I do this? I read a few things about putting xterm -e and such in front of it, but none of that works for me...
By the way, this will be used on Raspbian Linux.
EDIT, this worked for me:
Link: ubuntuforums.org/showthread.php?t=1336228 The line that was used: gnome-terminal --execute bash -c "/path/scriptname ; bash"
You just need to add a shebang, which means putting this in the first line of the script:
#!/bin/sh
This causes the bourne shell to be used to interpret the script, this is (probably) the same interpreter that runs when you are in your terminal. Then you should make the script executable chmod +x <script>
Try this.
xterm -hold -e 'cd /home/pi/PiBits/ServoBlaster/user
sudo ./servod' &
and
xterm -hold -e 'cd /home/pi/scratchClient
python crs/scratchClient.py -c servoblaster' &
If it doesn't work, perhaps you should explain in what way this fails. If it works, you can add a shebang in front, save them in files, chmod +x those files, and click away to your heart's content (or perhaps acquire a more sophisticated taste where you simply run these as background jobs without any xterm or other anxious GUI).
Solution was to use gnome-terminal... Found an UbuntuForums post with a similar question such as mine.
gnome-terminal --execute bash -c "/path/scriptname ; bash"
Related
I'm lazy, and I prefer that computers do my work for me. I ssh into several machines on a daily basis, so I created a simple script that launches some xterm windows and places them in positions I want (as you can see, I'm using bash):
#!/bin/bash
xterm -geometry 80x27+1930+0 &
xterm -geometry 80x27+2753+0 &
xterm -geometry 80x27+1930+626 &
xterm -geometry 80x27+2753+626 &
However, the next thing I do is go to the first window and type in
ssh server_a
then in the second
ssh server_b
and so on. What I'd like to do is have my script do the ssh commands in each xterm window, and then leave the windows open for me to do my work. I've seen the -e option for xterm, but the window closes after I execute my command. Is there a way to do this?
I apologize if this is a duplicate question. I've searched around and haven't had any luck with this. Many thanks!
I'd love to see a more elegant answer, but what I came up with does work:
xterm -e bash -c 'echo foo; exec bash'
Replace echo foo with the command of your choice, and you're good to go.
This answer gives one of the best answers I've seen so far to do this. Use the bash --init-file flag either in the shebang or when executing the terminal:
#!/bin/bash --init-file
commands to run
... and execute it as:
xterm -e /path/to/script
# or
gnome-terminal -e /path/to/script
# or
the-terminal -e bash --init-file /path/to/script/with/no/shebang
My only real complaint with the exec option is if the command executed prior to exec bash is long running and the user interrupts it (^C), it doesn't run the shell. With the --init-file option the shell continues running.
Another option is cmdtool from the OpenWin project:
/usr/openwin/bin/cmdtool -I 'commands; here'
# or
/usr/openwin/bin/cmdtool -I 'commands; here' /bin/bash
... where cmdtool injects the commands passed with -I to the slave process as though it was typed by the user. This has the effect of leaving the executed commands in the shell history.
Another option is to use gnome terminator. This creates and positions terminals interactively, and you can set up each terminal to run commands within terminator preferences.
Also does lots of extra tricks using keybindings for things like move, rotate, maximise/minimise of terminals within the containing terminator window
See: https://superuser.com/a/610048
"ClusterSSH controls a number of xterm windows via a single graphical console window to allow commands to be interactively run on multiple servers over an ssh connection"
https://github.com/duncs/clusterssh/wiki
$ cssh server_a server_b
$ command
I'm lazy, and I prefer that computers do my work for me. I ssh into several machines on a daily basis, so I created a simple script that launches some xterm windows and places them in positions I want (as you can see, I'm using bash):
#!/bin/bash
xterm -geometry 80x27+1930+0 &
xterm -geometry 80x27+2753+0 &
xterm -geometry 80x27+1930+626 &
xterm -geometry 80x27+2753+626 &
However, the next thing I do is go to the first window and type in
ssh server_a
then in the second
ssh server_b
and so on. What I'd like to do is have my script do the ssh commands in each xterm window, and then leave the windows open for me to do my work. I've seen the -e option for xterm, but the window closes after I execute my command. Is there a way to do this?
I apologize if this is a duplicate question. I've searched around and haven't had any luck with this. Many thanks!
I'd love to see a more elegant answer, but what I came up with does work:
xterm -e bash -c 'echo foo; exec bash'
Replace echo foo with the command of your choice, and you're good to go.
This answer gives one of the best answers I've seen so far to do this. Use the bash --init-file flag either in the shebang or when executing the terminal:
#!/bin/bash --init-file
commands to run
... and execute it as:
xterm -e /path/to/script
# or
gnome-terminal -e /path/to/script
# or
the-terminal -e bash --init-file /path/to/script/with/no/shebang
My only real complaint with the exec option is if the command executed prior to exec bash is long running and the user interrupts it (^C), it doesn't run the shell. With the --init-file option the shell continues running.
Another option is cmdtool from the OpenWin project:
/usr/openwin/bin/cmdtool -I 'commands; here'
# or
/usr/openwin/bin/cmdtool -I 'commands; here' /bin/bash
... where cmdtool injects the commands passed with -I to the slave process as though it was typed by the user. This has the effect of leaving the executed commands in the shell history.
Another option is to use gnome terminator. This creates and positions terminals interactively, and you can set up each terminal to run commands within terminator preferences.
Also does lots of extra tricks using keybindings for things like move, rotate, maximise/minimise of terminals within the containing terminator window
See: https://superuser.com/a/610048
"ClusterSSH controls a number of xterm windows via a single graphical console window to allow commands to be interactively run on multiple servers over an ssh connection"
https://github.com/duncs/clusterssh/wiki
$ cssh server_a server_b
$ command
Just updated cygwin to 1.7.28 on Windows 7.
Previously when starting X, the xterm would open with bash. For some reason it is now opening with sh?
What configuration changes do I need to make so that bash is the default shell again?
Not sure why this change happened.
The shortcut to open the xterm is the same as it was during my initial installation.
C:\cygwin\bin\run.exe /usr/bin/bash.exe -l -c /usr/bin/startxwin.exe
But it still starts with the default shell set to sh.
I don't understand what changed.
My passwd file is the same as it was before.
It appears that everything starts fine with the standard shortcuts, but the X and xterm startups are not sourcing /etc/profile
I had /etc/shells already (upgraded from ??? to 1.7.29), might have been new with upgrade, but still didn't work (xterm running sh instead of bash). Changed permissions on bash to fix.
It was 700 changed to 755
chmod 755 /bin/bash
xterm seems to need the /etc/shells file to be present to work. Add an /etc/shells file with the following contents:
# /etc/shells: valid login shells
/bin/csh
/bin/sh
/bin/bash
/bin/tcsh
/usr/bin/csh
/usr/bin/sh
/usr/bin/bash
/usr/bin/tcsh
Chris
Run following command to set bash as default shell.
set shell=C:/cygwin/bin/bash
Note path C:/cygwin/bin/bash may vary.
(Removed answer regarding /etc/passwd)
I tried your command on my cygwin and got the same behavior, i.e. xterm loaded with /bin/sh.
However, if I simply ran startxwin.exe directly, I get an xterm loaded with /bin/bash.
Dunno if this works for you, but, worth a try.
I had the same issue with sh launching, but managed a different workaround after having issues with /etc/shells
I also wanted to get rid of the default white /bin/sh xterm that startxwin.exe created.
It turns out there's a .startxwinrc that startxwin.exe sources, so I had it do this:
# Launch prettier xterms with bash
. ./.profile
# Exit the cruddy white xterm launched by startxwin
exit
The dot-space syntax above is equivalent to "source" in bash, but is more shell-independent.
i have very simple shell script
#!/bin/bash
cp -rf /var/www/ksite/app2/* /var/www/ksite/app
echo "----"
echo "done"
but seems cp command fails
if i execute
cp -rf /var/www/ksite/app2/* /var/www/ksite/app
from terminal everything work ok. Can someone tell me how to include cp in shell script?
Thanks
We seem to have doubt as to how this script fails. If there is no error message then this is a strange one. I suggest:
On the command line (which works), do a which cp
Whatever the reply, then copy that and use it as the cp in the script (e.g. /bin/cp)
Check the widcard expansion, run your script with bash -x script-name and see if you get what you expect.
echo $? after the copy in the script - if it is zero then it (thinks it) worked.
Do a ls -ld /var/www/ksite/app from your script, maybe someone set a symbolic link?
If it still fails, source the script from the command-line and see if that works . script-name
Double check that the copy did actually fail! (maybe that should be step 1.)
Make sure you really have bash at /bin/bash. I think a batter hash bang is:
#!/usr/bin/env bash
This uses the env command to locate the bash binary and set the environment.
I had similar problem. What helped me:
I used windows and putty to write script, so I had \r\n at the end of lines. Be sure, you have only \n symbol.
I copied files and the only way it worked for me at script was cp <source_dir>/fileName <dest_dir>/fileName whereas at command line cp <source_dir>/fileName <dest_dir> worked well too.
Just covering all the bases .. do the permissions vary between the excutions .. i.e. do you execute one with sudo/root privileges, the other as user (unlikely, but thought I'd ask since we don't know what the exact error is)
Similar issue to Vladmir where the script was created in Windows. I created a new file "my_bash_script.sh" in the linux environment using VIM, then read the contents of my script into the file:
:r file_made_in_windows.sh
Then I saved, closed, then set the file as executable:
chmod 744 my_bash_script.sh
From there, I ran the script:
./my_bash_script.sh
...and it worked. What a weird issue. I was confounded for a moment.
I created a bash script that opens several gnome-terminals, connect to classroom computers via ssh and run a script.
How can I avoid that the gnome-terminal closes after the script is finished? Note that I also want to be able to enter further commands in the terminal.
Here is an example of my code:
gnome-terminal -e "ssh root#<ip> cd /tmp && ls"
As I understand you want gnome-terminal to open, have it execute some commands, and then drop to the prompt so you can enter some more commands. Gnome-terminal is not designed for this use case, but there are workarounds:
Let gnome-terminal run bash and tell bash to run your commands and then start a new bash
$ gnome-terminal -- bash -c "echo foo; echo bar; exec bash"
or if the commands are in a script
$ gnome-terminal -- bash -c "./scripttorun; exec bash"
The first bash will terminate once all the commands are done. But the last command is a new bash which will then just keep running. And since something is still running gnome-terminal will not close.
Let gnome-terminal run bash with a prepared rcfile which runs your commands
Prepare somercfile:
source ~/.bashrc
echo foo
echo bar
Then run:
$ gnome-terminal -- bash --rcfile somercfile
bash will stay open after running somercfile.
i must admit i do not understand completely why --rcfile has this behaviour but it does.
Let gnome-terminal run a script which runs your commands and then drops to bash
Prepare scripttobash:
#!/bin/sh
echo foo
echo bar
exec bash
Set this file as executable.
Then run:
$ gnome-terminal -- ./scripttobash
for completeness
if you just want to be able read the output of the command and need no interactivity
go to preferences (hamburger button -> preferences)
go to profiles (standard or create a new one)
go to command tab
when command exits -> hold the terminal open
i recommend to create a new profile for just for this use case.
use the profile like this:
gnome-terminal --profile=holdopen -- ./scripttorun
Every method has it's quirks. You must choose, but choose wisely.
I like the first solution. it does not need extra files or profiles. and the command says what it does: run commands then run bash again.
All that said, since you used ssh in your example, you might want to take a look at pssh (parallel ssh). here an article: https://www.cyberciti.biz/cloud-computing/how-to-use-pssh-parallel-ssh-program-on-linux-unix/
Finally this one works for me:
gnome-terminal --working-directory=WORK_DIR -x bash -c "COMMAND; bash"
Stack Overflow answer: the terminal closes when the command run inside it has finished, so you need to write a command that doesn't terminate immediately. For example, to leave the terminal window open until you press Enter in it:
gnome-terminal -e "ssh host 'cd /tmp && ls'; read line"
Super User answer: Create a profile in which the preference “Title and Command/When command exits” is set to “Hold the terminal open”. Invoke gnome-terminal with the --window-with-profile or --tab-with-profile option to specify the terminal name.
Run with -ic instead -i to make terminal close bash proccess when you close your terminal gui:
gnome-terminal -e "bash -ic \"echo foo; echo bar; exec bash\""
As of January 2020, the -e option in gnome-terminal still runs properly but throws out the following warning:
For -e:
# Option “-e” is deprecated and might be removed in a later version
of gnome-terminal.
# Use “-- ” to terminate the options and put the command line to
execute after it.
Based on that information above, I confirmed that you can run the following two commands without receiving any warning messages:
$ gnome-terminal -- "./scripttobash"
$ gnome-terminal -- "./genericscripttobash \"echo foo\" \"echo bar\""
I hope this helps anyone else presently having this issue :)
The ideal solution would be to ask for a user input with echo "Press any key".
But if double-click in Nautis or Nemo and select run in a terminal, it doesn't seem to work.
In case of Ubuntu a shell designed for fast start-up and execution with only standard features is used, named dash I believe.
Because of this the shebang is the very first line to start with to enable proper use of bash features.
Normally this would be: #!/bin/bash or similar.
In Ubuntu I learned this should be: #!/usr/bin/env bash.
Many workarounds exist to keep hold of the screen before the interpreter sees a syntax error in a bash command.
The solution in Ubuntu that worked for me:
#!/usr/bin/env bash
your code
echo Press a key...
read -n1
For a solution applicable to any terminal, there is a script that opens a terminal, runs the command specified and gives you back the prompt in that new terminal:
https://stackoverflow.com/a/60732147/1272994
I really like the bash --rcfile method
I just source ~/.bashrc then add the commands I want to the new startrc.sh
now my automated start.sh work environment is complete... for now 😼
If running a bash script just add gedit afile to the end of the script and that will hold gnome-terminal open. "afile" could be a build log which it was in my case.
Did not try just using gedit alone but, that would properly work too.
Use nohup command.
nohup gnome-terminal -e "ssh root# cd /tmp && ls"
Hope this will help you.