I have a list of strings:
[" ix = index"," ctr = counter"," tbl = table"]
and I want to create a tuple from it like:
[("ix","index"),("ctr","counter"),("tbl","table")]
I even tried:
genTuple [] = []
genTuples (a:as)= do
i<-splitOn '=' a
genTuples as
return i
Any help would be appriciated
Thank you.
Haskell's type system is really expressive, so I suggest to think about the problem in terms of types. The advantage of this is that you can solve the problem 'top-down' and the whole program can be typechecked as you go, so you can catch all kinds of errors early on. The general approach is to incrementally divide the problem into smaller functions, each of which remaining undefined initially but with some plausible type.
What you want is a function (let's call it convert) which take a list of strings and generates a list of tuples, i.e.
convert :: [String] -> [(String, String)]
convert = undefined
It's clear that each string in the input list will need to be parsed into a 2-tuple of strings. However, it's possible that the parsing can fail - the sheer type String makes no guarantees that your input string is well formed. So your parse function maybe returns a tuple. We get:
parse :: String -> Maybe (String, String)
parse = undefined
We can immediately plug this into our convert function using mapMaybe:
convert :: [String] -> [(String, String)]
convert list = mapMaybe parse list
So far, so good - but parse is literally still undefined. Let's say that it should first verify that the input string is 'valid', and if it is - it splits it. So we'll need
valid :: String -> Bool
valid = undefined
split :: String -> (String, String)
split = undefined
Now we can define parse:
parse :: String -> Maybe (String, String)
parse s | valid s = Just (split s)
| otherwise = Nothing
What makes a string valid? Let's say it has to contain a = sign:
valid :: String -> Bool
valid s = '=' `elem` s
For splitting, we'll take all the characters up to the first = for the first tuple element, and the rest for the second. However, you probably want to trim leading/trailing whitespace as well, so we'll need another function. For now, let's make it a no-op
trim :: String -> String
trim = id
Using this, we can finally define
split :: String -> (String, String)
split s = (trim a, trim (tail b))
where
(a, b) = span (/= '=') s
Note that we can safely call tail here because we know that b is never empty because there's always a separator (that's what valid verified). Type-wise, it would've been nice to express this guarantee using a "non-empty string" but that may be a bit overengineered. :-)
Now, there are a lot of solutions to the problem, this is just one example (and there are ways to shorten the code using eta reduction or existing libraries). The main point I'm trying to get across is that Haskell's type system allows you to approach the problem in a way which is directed by types, which means the compiler helps you fleshing out a solution from the very beginning.
You can do it like this:
import Control.Monda
import Data.List
import Data.List.Split
map ((\[a,b] -> (a,b)) . splitOn "=" . filter (/=' ')) [" ix = index"," ctr = counter"," tbl = table"]
Related
I am using haskell and the following:
convertToBasis :: [String] -> Maybe [Basis]
convertToBasis [] = Nothing
convertToBasis (h:t) = basis : convertToBasis t
where
basis = toCandidateBasis h
Returns a type of [Maybe Basis] I want a type of Maybe [Basis]
toCandidateBasis is shown below:
toCandidateBasis :: String -> Maybe Basis
toCandidateBasis myStr = if not $ has7UniqueLetters myStr [] then
Nothing
else
Just (dedupAndSort myStr)
The function returns nothing if a String does not have 7 unique characters otherwise it removes duplicates and sorts the String alphabetically and return that result. Now the return type of the function is Maybe Basis. Hence when I when I get a list of strings and want to convert them to their respective candidate basises one by one, it will concat all the maybes and return me a type of:
[Maybe Basis]
But I want a type of
Maybe [Basis]
It should return Nothing only when the given Basis array is empty otherwise return some result. How do I do this?
There's really no reason to use a Maybe [a] unless there is a semantic difference between Nothing and Just [], which it sounds like there is not in your case. However, it is a fairly common use case to reduce a list [Maybe a] to a list [a] by removing all the Nothings— so common, in fact, that there's a builtin function for doing that: catMaybes :: [Maybe a] -> [a].
If I want to add a space at the end of a character to return a list, how would I accomplish this with partial application if I am passing no arguments?
Also would the type be?
space :: Char -> [Char]
I'm having trouble adding a space at the end due to a 'parse error' by using the ++ and the : operators.
What I have so far is:
space :: Char -> [Char]
space = ++ ' '
Any help would be much appreciated! Thanks
Doing what you want is so common in Haskell it's got its own syntax, but being Haskell, it's extraordinarily lightweight. For example, this works:
space :: Char -> [Char]
space = (:" ")
so you weren't far off a correct solution. ([Char] is the same as String. " " is the string containing the character ' '.) Let's look at using a similar function first to get the hang of it. There's a function in a library called equalFilePath :: FilePath -> FilePath -> Bool, which is used to test whether two filenames or folder names represent the same thing. (This solves the problem that on unix, mydir isn't the same as MyDir, but on Windows it is.) Perhaps I want to check a list to see if it's got the file I want:
isMyBestFile :: FilePath -> Bool
isMyBestFile fp = equalFilePath "MyBestFile.txt" fp
but since functions gobble their first argument first, then return a new function to gobble the next, etc, I can write that shorter as
isMyBestFile = equalFilePath "MyBestFile.txt"
This works because equalFilePath "MyBestFile.txt" is itself a function that takes one argument: it's type is FilePath -> Bool. This is partial application, and it's super-useful. Maybe I don't want to bother writing a seperate isMyBestFile function, but want to check whether any of my list has it:
hasMyBestFile :: [FilePath] -> Bool
hasMyBestFile fps = any (equalFilePath "MyBestFile.txt") fps
or just the partially applied version again:
hasMyBestFile = any (equalFilePath "MyBestFile.txt")
Notice how I need to put brackets round equalFilePath "MyBestFile.txt", because if I wrote any equalFilePath "MyBestFile.txt", then filter would try and use just equalFilePath without the "MyBestFile.txt", because functions gobble their first argument first. any :: (a -> Bool) -> [a] -> Bool
Now some functions are infix operators - taking their arguments from before and after, like == or <. In Haskell these are just regular functions, not hard-wired into the compiler (but have precedence and associativity rules specified). What if I was a unix user who never heard of equalFilePath and didn't care about the portability problem it solves, then I would probably want to do
hasMyBestFile = any ("MyBestFile.txt" ==)
and it would work, just the same, because == is a regular function. When you do that with an operator function, it's called an operator section.
It can work at the front or the back:
hasMyBestFile = any (== "MyBestFile.txt")
and you can do it with any operator you like:
hassmalls = any (< 5)
and a handy operator for lists is :. : takes an element on the left and a list on the right, making a new list of the two after each other, so 'Y':"es" gives you "Yes". (Secretly, "Yes" is actually just shorthand for 'Y':'e':'s':[] because : is a constructor/elemental-combiner-of-values, but that's not relevant here.) Using : we can define
space c = c:" "
and we can get rid of the c as usual
space = (:" ")
which hopefully make more sense to you now.
What you want here is an operator section. For that, you'll need to surround the application with parentheses, i.e.
space = (: " ")
which is syntactic sugar for
space = (\x -> x : " ")
(++) won't work here because it expects a string as the first argument, compare:
(:) :: a -> [a] -> [a]
(++) :: [a] -> [a] -> [a]
Support I have a list of type [Char], and the values enclosed are values of a different type if I remove their quotations which describe them as characters. e.g. ['2','3','4'] represents a list of integers given we change their type.
I have a similar but more complicated requirement, I need to change a [Char] to [SomeType] where SomeType is some arbitrary type corresponding to the values without the character quotations.
Assuming you have some function foo :: Char -> SomeType, you just need to map this function over your list of Char.
bar :: [Char] -> [SomeType]
bar cs = map foo cs
I hope I get this correctly and there is a way (if the data-constructors are just one-letters too) - you use the auto-deriving for Read:
data X = A | B | Y
deriving (Show, Read)
parse :: String -> [X]
parse = map (read . return)
(the return will just wrap a single character back into a singleton-list making it a String)
example
λ> parse "BAY"
[B,A,Y]
I've just started trying to learn haskell and functional programming. I'm trying to write this function that will convert a binary string into its decimal equivalent. Please could someone point out why I am constantly getting the error:
"BinToDecimal.hs":19 - Syntax error in expression (unexpected `}', possibly due to bad layout)
module BinToDecimal where
total :: [Integer]
total = []
binToDecimal :: String -> Integer
binToDecimal a = if (null a) then (sum total)
else if (head a == "0") then binToDecimal (tail a)
else if (head a == "1") then total ++ (2^((length a)-1))
binToDecimal (tail a)
So, total may not be doing what you think it is. total isn't a mutable variable that you're changing, it will always be the empty list []. I think your function should include another parameter for the list you're building up. I would implement this by having binToDecimal call a helper function with the starting case of an empty list, like so:
binToDecimal :: String -> Integer
binToDecimal s = binToDecimal' s []
binToDecimal' :: String -> [Integer] -> Integer
-- implement binToDecimal' here
In addition to what #Sibi has said, I would highly recommend using pattern matching rather than nested if-else. For example, I'd implement the base case of binToDecimal' like so:
binToDecimal' :: String -> [Integer] -> Integer
binToDecimal' "" total = sum total -- when the first argument is the empty string, just sum total. Equivalent to `if (null a) then (sum total)`
-- Include other pattern matching statements here to handle your other if/else cases
If you think it'd be helpful, I can provide the full implementation of this function instead of giving tips.
Ok, let me give you hints to get you started:
You cannot do head a == "0" because "0" is String. Since the type of a is [Char], the type of head a is Char and you have to compare it with an Char. You can solve it using head a == '0'. Note that "0" and '0' are different.
Similarly, rectify your type error in head a == "1"
This won't typecheck: total ++ (2^((length a)-1)) because the type of total is [Integer] and the type of (2^((length a)-1)) is Integer. For the function ++ to typecheck both arguments passed to it should be list of the same type.
You are possible missing an else block at last. (before the code binToDecimal (tail a))
That being said, instead of using nested if else expression, try to use guards as they will increase the readability greatly.
There are many things we can improve here (but no worries, this is perfectly normal in the beginning, there is so much to learn when we start Haskell!!!).
First of all, a string is definitely not an appropriate way to represent a binary, because nothing prevents us to write "éaldkgjasdg" in place of a proper binary. So, the first thing is to define our binary type:
data Binary = Zero | One deriving (Show)
We just say that it can be Zero or One. The deriving (Show) will allow us to have the result displayed when run in GHCI.
In Haskell to solve problem we tend to start with a more general case to dive then in our particular case. The thing we need here is a function with an additional argument which holds the total. Note the use of pattern matching instead of ifs which makes the function easier to read.
binToDecimalAcc :: [Binary] -> Integer -> Integer
binToDecimalAcc [] acc = acc
binToDecimalAcc (Zero:xs) acc = binToDecimalAcc xs acc
binToDecimalAcc (One:xs) acc = binToDecimalAcc xs $ acc + 2^(length xs)
Finally, since we want only to have to pass a single parameter we define or specific function where the acc value is 0:
binToDecimal :: [Binary] -> Integer
binToDecimal binaries = binToDecimalAcc binaries 0
We can run a test in GHCI:
test1 = binToDecimal [One, Zero, One, Zero, One, Zero]
> 42
OK, all fine, but what if you really need to convert a string to a decimal? Then, we need a function able to convert this string to a binary. The problem as seen above is that not all strings are proper binaries. To handle this, we will need to report some sort of error. The solution I will use here is very common in Haskell: it is to use "Maybe". If the string is correct, it will return "Just result" else it will return "Nothing". Let's see that in practice!
The first function we will write is to convert a char to a binary. As discussed above, Nothing represents an error.
charToBinary :: Char -> Maybe Binary
charToBinary '0' = Just Zero
charToBinary '1' = Just One
charToBinary _ = Nothing
Then, we can write a function for a whole string (which is a list of Char). So [Char] is equivalent to String. I used it here to make clearer that we are dealing with a list.
stringToBinary :: [Char] -> Maybe [Binary]
stringToBinary [] = Just []
stringToBinary chars = mapM charToBinary chars
The function mapM is a kind of variation of map which acts on monads (Maybe is actually a monad). To learn about monads I recommend reading Learn You a Haskell for Great Good!
http://learnyouahaskell.com/a-fistful-of-monads
We can notice once more that if there are any errors, Nothing will be returned.
A dedicated function to convert strings holding binaries can now be written.
binStringToDecimal :: [Char] -> Maybe Integer
binStringToDecimal = fmap binToDecimal . stringToBinary
The use of the "." function allow us to define this function as an equality with another function, so we do not need to mention the parameter (point free notation).
The fmap function allow us to run binToDecimal (which expect a [Binary] as argument) on the return of stringToBinary (which is of type "Maybe [Binary]"). Once again, Learn you a Haskell... is a very good reference to learn more about fmap:
http://learnyouahaskell.com/functors-applicative-functors-and-monoids
Now, we can run a second test:
test2 = binStringToDecimal "101010"
> Just 42
And finally, we can test our error handling system with a mistake in the string:
test3 = binStringToDecimal "102010"
> Nothing
For a test app, I'm trying to convert a special type of string to a tuple. The string is always in the following format, with an int (n>=1) followed by a character.
Examples of Input String:
"2s"
"13f"
"1b"
Examples of Desired Output Tuples (Int, Char):
(2, 's')
(13, 'f')
(1, 'b')
Any pointers would be extremely appreciated. Thanks.
You can use readS to parse the int and get the rest of the string:
readTup :: String -> (Int, Char)
readTup s = (n, head rest)
where [(n, rest)] = reads s
a safer version would be:
maybeReadTup :: String -> Maybe (Int, Char)
maybeReadTup s = do
[(n, [c])] <- return $ reads s
return (n, c)
Here's one way to do it:
import Data.Maybe (listToMaybe)
parseTuple :: String -> Maybe (Int, Char)
parseTuple s = do
(int, (char:_)) <- listToMaybe $ reads s
return (int, char)
This uses the Maybe Monad to express the possible parse failure. Note that if the (char:_) pattern fails to match (i.e., if there is only a number with no character after it), this gets translated into a Nothing result (this is due to how do notation works in Haskell. It calls the fail function of the Monad if pattern matches fail. In the case of Maybe a, we have fail _ = Nothing). The function also evaluates to Nothing if reads can't read an Int at the beginning of the input. If this happens, reads gives [] which is then turned into Nothing by listToMaybe.