I want to compress files from the filesystem to a directory within a new zip archive or update an old one. So here is my example:
directory/
|-file1.ext
|-file2.ext
|-file3.ext
in the zip archive it should look like this:
new_directory/
|-file1.ext
|-file2.ext
|-file3.ext
I could copy the files to a new directory and compress them from there but i do not want to have that extra step. I haven't found an answer to that problem on google. The man page doesn't mention anything like that aswell so I hope somebody can help me.
I don't think the zip utility supports this sort of transformation. A workaround is to use a symbolic link:
ln -s directory new_directory
zip -r foo.zip new_directory
rm new_directory
If other archive formats are an option for you, then this would be a bit easier with a tar archive, since GNU tar has a --transform option taking a sed command that it applies to the file name before adding the file to the archive.
In that case, you could use (for example)
tar czf foo.tar.gz --transform 's:^directory/:new_directory/:' directory
Related
i used the following:
gzip -9 -c -r <some_directory> > directory.gz
how do i decompress this directory ?
I have tried
gunzip directory.gz
i am just left with a single file and not a directory structure.
As others have already mentioned, gzip is a file compression tool and not an archival tool. It cannot work with directories. When you run it with -r, it will find all files in a directory hierarchy and compress them, i.e. replacing path/to/file with path/to/file.gz. When you pass -c the gzip output is written to stdout instead of creating files. You have effectively created one big file which contains several gzip-compressed files.
Now, you could look for the gzip file header/magic number, which is 1f8b and then reconstruct your files manually.
The sensible thing to do now is to create backups (if you haven't already). Backups always help (especially with problems such as yours). Create a backup of your directory.gz file now. Then read on.
Fortunately, there's an easier way than manually reconstructing all files: using binwalk, a forensics utility which can be used to extract files from within other files. I tried it with a test file, which was created the same way as yours. Running binwalk -e file.gz will create a folder with all extracted files. It even manages to reconstruct the original file names. The hierarchy of the directories is probably lost. But at least you have your file contents and their names back. Good luck!
Remember: backups are essential.
(For completeness' sake: What you probably intended to run: tar czf directory.tar.gz directory and then tar xf directory.tar.gz)
gzip will compress 1+ files, though not meant to function like an archive utility. The posted cmd-line would yield N compressed file images concatenated to stdout, redirected to the named output file; unfortunately stuff like filenames and any dirs would not be recorded. A pair like this should work:
(create)
tar -czvf dir.tar.gz <some-dir>
(extract)
tar -xzvf dir.tar.gz
I am trying to archive the contents of my home directory using tar and then compress the tar file with gzip. I know you can uncompress and unarchive the .tar.gz file using cat, tar and gzip. But , I don't know how to compress and archive.
Hey there here is a link for your question. a full guide
https://www.howtogeek.com/248780/how-to-compress-and-extract-files-using-the-tar-command-on-linux/
tar -czvf name-of-archive.tar.gz /path/to/directory-or-file
Here’s what those switches actually mean:
-c: Create an archive.
-z: Compress the archive with gzip.
-v: Display progress in the terminal while creating the archive, also known as “verbose” mode. The v is always optional in these commands, but it’s helpful.
-f: Allows you to specify the filename of the archive.
With PHP I am using exec("tar -xf archive.tar -C /home/user/target/folder") to extract the contents of a specific archive (archive.tar) into the target directory (/home/user/target/folder), so that all existing contents of the target directory will be overwritten by the new ones that are contained in the archive.
It works fine and all files in the target directory are being overwritten after extract, but there is one directory in the archive that I would like to omit (from extracting and thus overwriting the existing one in the target folder)...
For example, the archive.tar contains:
folderA/
folderB/
folderC/
folderD/
fileA.php
fileB.php
fileC.xml
How could I extract (and overwrite) all except (for example) folderC/? In other words, I want folderC and its contents to remain intact in the user's directory and not be overwritten by the one contained in the tar archive.
Any suggestions?
(Tar on the hosting server is GNU version 1.23.)
You can use '--exclude' to omit a folder:
tar -xf archive.tar -C /home/user/target/folder" --exclude="folderC"
There is the --exclude PATTERN option in the tar tool.
Check: tar on linuxcommand.org
To be on the safe side, you could remove all write permissions from the folder. For example:
$ chmod 000 folderC/
An then do a normal tar extract (as regular user). You'll get some error messages on console, but your folder will remain untouched.... At the end of the tar, change back your folder original permissions. For example:
$ chmod 775 folderC/
Of course '--exclude' tar option is the right solution to this particular problem, but, if you are not completely 100% sure about a command syntax, and yor're handling critical data, my solution puts you on the safe side :-).
Write --exclude='./folder' at the beginning of the tar command.
In your case that is,
exec("tar -x --exclude='./C' -f archive.tar -C /home/user/target/folder")
Let's say I'm trying to tar.gz all the files and folders in /usr/local/bin/data/*
The file name would be data-2015-10-01.tar.gz. When I untar it, is it possible that the root directory would be data-2015-10-01 followed by the contents of whatever is inside of data/* ?
If not, how can I tar /usr/local/bin/data/* but start at the /data/ folder level?
I can't do this unfortunately since the program spits out /usr/local/bin/data/ and I'm unable to change it.
cd /usr/local/bin
tar ... /data/*
There are a couple of ways to do what I think you're trying to accomplish. First, you can use the -C option to tar when creating the archive. That changes tar's current working directory to that directory before creating the archive. Not strictly required in your case, but probably helpful.
# tar -C /usr/local/bin -czf data-2015-10-01.tar.gz data/*
That at least gets you to a single directory named data. If you have control of the extraction (manually or via a script you provide to whomever is unpacking this), then you can do something like this on the extraction:
# mkdir -f data-2015-10-01 && tar -C data-2015-10-01 --strip-components=1 -xzf data-2015-10-01.tar.gz
This will remove the first path, which is "data" and extract everything from there into the directory which is your current working directory, data-2015-10-01. So, it isn't specifically tar that's doing the renaming, but you will effectively end up with the same result.
I've accomplished something similar with a symlink. This is not a great solution if you have (or might have) symlinks in the directory structure you're trying to archive. I have to say that I prefer #geis' solution to strip out the top-level directory on extract, but this gives you another option.
ln -s /usr/local/bin/data data-2015-10-01
tar -cvhf data-2015-10-01.tar.gz data-2015-10-01/
rm data-2015-10-01
(Note the additional -h option in the tar invocation.)
I need to compress certain files and a directory. Suppose they're placed in /root/project.
The thing is that i need to compress them in a gzip-tarball format with certain name (name.tar.gz) and in the "root" directory, i mean, that as soon as i opened the .tar.gz all the files and directories i want to compress are there.
I have tried using the following commands:
tar czfv name.tar.gz /root/project
tar czfv name.tar.gz /root/project/*
but then the whole substructure gets compress (i mean, when i open the .tar.gz i have to navigate through the directories root/project.. which i dont, i need that the files were as soon as i opened in "/" i suppose)
I hope i've explained myself... excuse me for my bad english and thanks in advance!
If you are using GNU tar you can use the following command:
tar -C /root/project -zcvf /root/name.tar.gz .
The -C causes tar to change to the /root/project directory before adding the . directory to the archive. Make sure the destination directory for your archive is not in the directory you are archiving (/root/project). This example creates the archive in /root.
If you want the filenames in the tarball to all have a project/ prefix (which is often advisable), do
(cd /root && tar czvf `pwd`/name.tar.gz project)
If you don't want a prefix at all, do
(cd /root/project && tar czvf `pwd`/name.tar.gz .)
(The pwd captures the present working directory prior to doing the cd; the parentheses execute the command in a subshell so your current shell stays in the same directory.)