I want to have three public ip addresses for my VM in azure. I got one when I created the VM and now I want to assign two reserved ip addresses to my VM. I was able to create the reserved ip address but not sure how to assign them to existing VM or assign multiple to a new VM. Any suggestions on how to do this?
In Azure, a Load Balancer is required in order to direct traffic from multiple VIP addresses to a single (or multiple) VMs.
If, for example, you want a single VM to host multiple websites, all of which need to be accessible externally via port 443, you'd need three VIP addresses assigned to the Load Balancer, with a NAT on each at least two of the VIPs; i.e.
Site a: Incoming 443-443 to VM
Site b: Incoming 443-444 to VM
Site c: Incoming 443-445 to VM
All the traffic from the Load Balancer could then be routed to one VM, where you'd direct traffic on each incoming port to the required website based. This MS article explains it really well: https://azure.microsoft.com/en-gb/documentation/articles/load-balancer-multivip/
Reserved IP addresses are a way of ensuring that your VIP is no longer dynamic, which they are by default. The following article explains it well, including how to take an existing Cloud Service's currently-running dynamic VIP and making it static (Reserved): https://azure.microsoft.com/en-gb/documentation/articles/virtual-networks-reserved-public-ip/
An Azure VM can have two public IP addresses - one is the VIP of the cloud service containing the VM (as long as there are endpoints configured for the VM) and the other is the PIP (or public instance IP address) associated with the VM. A reserved IP address is an orthogonal concept to VIPs and PIPs and its use is documented here. I did a post on VIPs, DIPs and PIPs that you may find helpful.
Related
I have an Azure Cloud Service, mywebapp.cloudapp.net, that consists of two Azure VMs - mywebappvm1 and mywebappvm2. Both VMs are in the same Availability Set and have the same DNS name.
I also have a Regional Reserved IP address assigned to the Cloud Service so that I can give our clients a guaranteed IP address that our app uses.
Part of the app uses a private background process, currently only running on one of the VMs. I want to be able to make a connection to that process over TCP running on mywebappvm1 from mywebappvm2. I could use the public IP and an endpoint on mywebappvm1 but I don't want the background service to be publicly accessible.
I'm currently using the private IP address, but is that safe? Will the private IP of each VM change if it's rebooted? I can't see an easy way of fixing the private IP of each VM - that seems like something you can do with a VNET but I can't find any information on how to do it with a cloud service and an availability group as well.
Is there perhaps another way to run a web app on multiple load-balanced VMs within an availability set that would make this easier?
What you do is absolutely safe and actually a recommended best practice. You should not go out to public IP address in order to communicate between the Virtual Machines.
It is also a recommended best practice to organize your Virtual Machines into Virtual Network and sub-nets.
This excellent blog post describes how can you even use static IP addresses for the VMs, so you are always 100% sure that mywebappvm1 always get XXX.XXX.XXX.XXX IP Address andyour mywebappvm2 always get YYY.YYY.YYY.YYY IP Address.
Please note that if you do not use Static IP Address assigned to the VM, it is guaranteed that the IP Address of the VM may change.
The IP for a webRole VM instance will not change for the lifetime of the deployment regardless of reboot, update or swapping. The IP will be released only if you delete the deployment, detailed here
I had a need to add additional public IP addresses to an Azure VM and found a working solution here:
Azure VM: More than one Public IP
Essentially this creates a reserved IP in Azure and then adds the reserved IP to a cloud service. Once it's bound to a cloud service it can be mapped to a VM endpoint.
This all works great but there is one bit I don't understand - The IP address of the reserved IP and the resultant VM endpoint don't match. I have to set up DNS to point to the IP address of the endpoint to make this work. Is there something I am not doing right, or is this just the way reserved VMs work?
It looks like this unanswered question is the same issue:
azure reserved IP for VM is diffrent than the given
Thanks!
The "Azure Cloud Service" is a container that provides internet connectivity to "Azure VMs". Thus, you assign the Internet facing Public IP to the Cloud Service. This article is relatively good at explaining the relationship: Azure Cloud Services
From above link:
Here’s a definition of an Azure IaaS cloud service that will make it easy for you to understand what it is in the context of Azure Infrastructure Services:
A cloud service is a network container where you can place virtual machines.
All virtual machines in that container can communicate with each other directly through Azure (and therefore don’t have to go out to the Internet to communicate with each other).
This container is also assigned a DNS name that is reachable from the Internet.
A rudimentary DNS server is created and can provide name resolution for all virtual machines within the same cloud service container (note that name resolution provided by the DNS server is only available to the virtual machines that are located within the cloud service).
One or more Virtual IP Addresses (VIPs) are assigned to the container and these IP addresses can be used to allow inbound connections from the Internet to the virtual machines.
Certain services (like FTP) may require your vm have a public IP: Azure VM Public IP
(IaaS v1) An Azure cloud service comes with a permanent DNS name - something.cloudapp.net - and has a single VIP allocated whenever there are VMs deployed in it OR whenever a reserved IP address is associated with it. Traffic is either load balanced or NATted (port forwarded) to the VM from the Azure Load Balancer sitting on the VIP. You can also associate a public instance-level IP address (PIP) with a VM, which gives it an additional IP address. The VIP always has a DNS name (something.cloudapp.net) while the PIP has one only if you specifically add it, I did a post which goes into these differences.
(IaaS v2) VMs are not deployed into cloud services and only have a public IP address if one is specifically added - either by configuring a PIP on the NIC of the VM (and optionally giving it a cloudapp.azure.com DNS name) or by configuring a load balancer and either load balancing or NATting traffic to it. This load balancer is configured with a public IP address and can optionally have a cloudapp.azure.com DNS name associated with it. (Ignoring internal load balancers in this discussion.)
I'm setting up a test web farm in Azure. Consisting of:
Four Ubuntu Servers
Two balancers running HAProxy + Keepalived
Two web servers running Apache
Keepalived has been configured and everything has been working fine. HAProxy performs great.
My issue is that I want to enable the Keepalived failover clustering, but I can't seem to figure out how to create an Input Endpoint in Azure for the virtual IP address that the Keepalived VRRP is using.
In other words, I want to create an Input Endpoint for a virtual IP address in Azure, but not for an existing VM. So far, the only thing I've been able to do is create Input Endpoints for existing VMs (using their IP) for specific port numbers. I want to be able to configure:
Take TCP requests on port XX and map them to IP address YY.YY.YY.YY on port ZZ
Anyone know of a way to do this? I've looked on both portals (new and old) and the closest thing I see is the Cloud Services page for my VNET has the Input Endpoints listed. But no add/edit button.
This is not currently possible in Azure. Azure IaaS VMs do not yet support multiple IPs per interface, so keepalived will not be able to move a VIP between the nodes. We tried to do the same thing and were told it's not currently available. However, it's supposed to be on the road-map and it is "coming", as is the ability to have multiple interfaces per machine.
Input endpoints are to expose some service on a single VM (it's a NAT), and they are not attachable to an actual interface. The only option that I thought through, was to use Azure's Traffic Manager to round robin between the two HAProxy instances using two exposed endpoints, with a health check to fail to a single HAProxy instance if one fails.
I created 2 vms, one for centos and another one for azure, I used the same cloud service, but both have the same public IP Address, why>? can I change it?
Or they have to be in different separate cloud services?
By default, they are behind a single IP address which load balances the private IP addresses. Until recently, there was no way to get a public IP for a virtual machine.
Now, it's possible to assign a public IP to a virtual machine:
With Instance-level Public IPs for VMs, you can now assign public IP addresses to your virtual machines, so they become directly addressable without having to map an endpoint through a VIP. This feature will enable scenarios like easily running FTP servers in Azure and monitoring virtual machines directly using their IPs.
We are making this new capability available in preview form today. This feature is available only with new deployments and new virtual networks and can be enabled via PowerShell.
Typically, the load balancer is fine, but there are options if you absolutely need access to individual machines.
Since they're in the same cloud service, they're probably behind the same load balancer, and a load balancer would only have one public IP.
So, yes, I would use different cloud services as you mentioned.
Can anyone confirm if Azure VM allows more than one Public IP? We want to host multiple website on single VM and hence want to have different IP for each website. I know we can host more VM, but that will greatly increase our expense too. So, I just want more than 1 Public IP on VM.
You can add multiple IP addresses for a cloud service. Since the VM's are "inside" the cloud service, this gives you in a way multiple public IP addresses for a virtual machine. The procedure is documented at [1]. Additional addresses currently cost about $3/month.
Here's the steps to add a new reserved IP address to a cloud service.
First create a new reserved IP address:
New-AzureReservedIP –ReservedIPName "MyIPAddress" –Location "West Europe"
Associate the IP address with cloud service:
Add-AzureVirtualIP -VirtualIPName MyIPAddress -ServiceName MyCloudService
Create endpoint that maps the IP address to a virtual machines. If you have multiple vm's and want load balancer, repeat this for each vm. In order to run multiple web sites, you would put each website to different port (the localport). The endpoint listens for connections on the public port and forwards them to the virtual machine's localport.
Get-AzureVM -ServiceName MyCloudService -Name myserver `
| Add-AzureEndpoint -Name QuvastoMail -Protocol tcp `
-LocalPort 8002 -PublicPort 80 -VirtualIPName MyIPAddress `
| Update-AzureVM
[1] http://azure.microsoft.com/en-us/documentation/articles/load-balancer-multivip/
It appears you can now have multiple public IPs for a load balanced cloud service:
http://azure.microsoft.com/en-gb/updates/multiple-vips-per-cloud-service/
Now you can assign more than one load-balanced public IP address to a
set of virtual machines, enabling high-availability and high-scale
scenarios. You can host multiple secure websites in a cloud service or
allow multiple SQL Server AlwaysOn Availability Group listeners to
access the same set of virtual machines.
For more information, please vistit the Load Balancer page. There is
no additional charge for this feature.
You would need a different Cloud Service (either Web Role or Virtual Machine) to have different IP addresses. Yes, this will increase overall cost.
The VIP (public IP) for Windows Azure Web Roles and VMs is assigned at the Cloud Service level. Think of a Cloud Service as a logical container - it can contain web/worker roles or VMs (not both currently).
Very possible, very easy actually.
Have your apps listening at your Azure Resource Managed VM, let's say ports 3001, 3002, 3003..
Then create an Load Balancer (just search it).
Create a Public IP Address.
Add it at your Load Balancer's Front-end Pool
Add your VM to your Load Balancer's Back-end Pool
at Inbound NAT rules of your Load Balancer, click "Add"
Select your frontend IP, your VM's network IP configuration, protocol, port and mapped port (click "Custom") to set a custom port.
Sample:
- You want your newly created public ip "52.165.147.25" to route to your vm's port 3001.
- On config that will be port 80 tcp, then port 3001 on mapped port.
- No need to enable "Floating IP (direct server return)" in case you see it.
PS:
On linux VM's you might have to "Optimize Your Network Kernel Parameters"..
Check here (scroll at bottom): http://docs.fluentd.org/v0.12/articles/before-install
sudo nano /etc/sysctl.conf
Add these entries:
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.ip_local_port_range = 10240 65535
Note the spaces, crucial.
Save it.
sudo sysctl -p
Done.
EDIT:
On the above steps you might have to also take care of CORS (Just google it)
Also, Another alternative I forgot to mention is to add NIC's / Network Interfaces to ya VM's. That won't be a viable option though because of azure max-nic-per-vm limits.
In addition to the earlier answer about Cloud Services, it is now possible to have multiple IP addresses on an Azure VM. https://learn.microsoft.com/en-us/azure/virtual-network/virtual-network-multiple-ip-addresses-portal
You can only have one public IP address per deployment. So if you had 3 VMs in a single deployment, they'd share IP address. You can then choose to load-balance traffic across the instances or direct traffic to a particular VM (or role in cloud services) for a specific port number.
You can use host headers and support multiple websites in a single VM.
We are also having similar problems. We wanted to have multiple SSL certificates applied to multiple sites hosted withing Virtual Machine.
but it seems its not possible at all. Waiting for MS to release this feature.
Comparatively Godaddy and other hosting providers give free 2-3 IP addressed as well if you need more you can request additional Ip Address easily.
as well to get hold of support is too much difficult.
MZ azure really sucks. :(