I'd like to have my go files indented with tabs not whitespaces.
When I run :set expandtab then :retab I get what I want but it automatically switches back to an indentation with whitespaces everytime I save the file.
I am using the vim-go plugin but I couldn't find anything in the doc/code which could lead to this issue. I have tried changing to setlocal noexpandtab in ftplugin/go.vim but it didn't work
How can I change this?
Many thanks
Put that in the ~/.vimrc file to make the settings permanent.
Here's a wiki article on this - http://vim.wikia.com/wiki/Indent_with_tabs,_align_with_spaces
Related
I am using Vim 7.3.154 cli on Linux Mint 12 "Lisa"(x64).
I prefer using a tabstop and shiftwidth of 2 columns.
My .vimrc has
:set ts=2
:set sw=2
to accomplish the same.
Whenever I open a new instance of Vim, tabstop value is retained, so existing tabs are rendered according to .vimrc. But somehow the shiftwidth value gets changed to 3. This results in 3 column indention while auto-indenting.
Running :set sw=2 on the new instance of Vim fixes this issue.
Can anyone tell me why Vim is ignoring/changing shiftwidth value from .vimrc?
I tried disabling all plugins to no avail.
Vim compiled options | .vimrc
This answer just summarizes what we discussed in the comments. :)
This is most likely caused by the fact that you have file specific settings enabled. Check :h modeline for more info on that. Make sure that those files you have the problems with don't have this line in them.
Instead of only setting tabstop and shiftwidth you should also setup a couple more settings regarding whitespace and tabs.
set noexpandtab " Make sure that every file uses real tabs, not spaces
set shiftround " Round indent to multiple of 'shiftwidth'
set smartindent " Do smart indenting when starting a new line
set autoindent " Copy indent from current line, over to the new line
" Set the tab width
let s:tabwidth=4
exec 'set tabstop=' .s:tabwidth
exec 'set shiftwidth=' .s:tabwidth
exec 'set softtabstop='.s:tabwidth
Check this video for some extra info: http://vimcasts.org/episodes/tabs-and-spaces/
So this is the answer to the actual problem that you were able to solve. That php.php file was in the /plugin directory. That directory gets loaded once, each and every time Vim starts up. Check this: http://learnvimscriptthehardway.stevelosh.com/chapters/42.html#vimplugin
If what you want is that file to load only on PHP files then you should put it in the /ftplugin folder: http://learnvimscriptthehardway.stevelosh.com/chapters/42.html#vimftplugin
Read the documentation there, it should be a .vim file, in other words in this case it would be called php.vim.
What Pathogen or Vundle do is modify the runtimepath (:h runtimepath), nothing more, nothing less.
So you can now accept this answer, by clicking the little green arrow to the left of this answer. :)
You can run:
verbose set shiftwidth ?
to check what is setting the value of shiftwidth. It might coming from a plugin. You can also choose to modify the value there.
I love tabs, and prefer it to spaces in indentation.
But I'd like to transform tabs into 4-space groups when saving files. (Because the file may be opened and edited in other environments) And of course, those generated spaces should be converted back to tabs if I open the file again. (Assume that there are no 4 contiguous spaces in the original text)
Well in your .vimrc:
set noexpandtab
set tabstop=4
set shiftwidth=4
fun MyRetab()
set expandtab
retab
set noexpandtab
endfun
au FileWritePre *.YOURFILEEXTENSION call MyRetab()
But I don't know what you mean by "those spaces should be still recognized as tabs if I open the file again."
If you write a file spaces instead of tabs, well it can't be undone easily AFAIK. EDIT: see the super retab wiki page for undoing it!
NOTE if you have tab(s) in your source's string contents this will replace that as well!
In addition to Zsolt Botykai's answer, you could try using retab!, which attempts to replace spaces with tabs where appropriate. This seemed to work quite well when I just tried it, but I got a few erroneous tabs. I suppose it depends how good your assumption is that there no other sequences of 4 spaces other than expanded tabs.
HOWEVER... this all seems like a risky business. In my experience, when there are coding/encoding standards such as these, it is always easiest to adhere to them from the start. "Fixing-up" the file in this way is asking for trouble.
I think Vim does a good job of emulating tab-like behaviour while using only spaces. Have you tried using smarttab and expandtab?
In TeX vim usually screws up my indentation. Mainly when I'm in a displayed equation which I think should look like this:
\[
x=\frac{y}{z}
\]
where the whitespace infront of the x is one tab.
When I start type the equation I type the \[ and \] marks first and then go back between them, typing the tab and then the rest of the equation.
Vim doesn't do anything wrong until I have to use something that incorporates curly braces (\frac{} for example). When I type the closing } vim automatically shifts the indentation for the whole line to the left, which undoes my typed tab.
This is very anoying, how do I disable it?
my .vimrc contains:
"indentation
set smartindent
set autoindent
set tabstop=5
set shiftwidth=5
filetype indent on
I just spent a few hours working through indentation pains with javascript, and the conclusion I came to is don't remove filetype indent on from your vimrc!
This setting provides the best smart indentation for multiple file types. If you're getting bad results with this, there's likely a configuration issue at hand.
File Specific Indent Settings
So if you're like me, you probably had filetype indent on in your vimrc and had no idea what it was doing.
All this setting does is tell vim to look for files with filetype-specific indent rules. There are a few places it looks, but there are probably only two that you'd be interested in.
$VIMRUNTIME/indent/
~/.vimrc/after/indent/
The first place holds the default indent rules that come with vim. If you were to set filetype indent on on a fresh vim installation, this is where all the smart indenting would come from. For example, when you open a file called index.html in would get the rules from $VIMRUNTIME/indent/html.vim.
In my experience, these default rules are pretty darn good, but they can get messed up by other settings.
The second place (the after directory) allows you to add settings that will supercede those in the first place. This is nice because you don't have to edit the default files in order to customize them.
Flavors of Indentation
There are a few different indentation options as you've seen, and they don't all play nice together. From the Vim wiki:
autoindent
'autoindent' does nothing more than copy the indentation from the previous line, when starting a new line. It can be useful for structured text files, or when you want to control most of the indentation manually, without Vim interfering. 'autoindent' does not interfere with other indentation settings, and some file type based indentation scripts even enable it automatically.
I use filetype indent on and set autoindent in my vimrc, since they work well together. I don't have the others set.
smartindent & cindent
'smartindent' automatically inserts one extra level of indentation in some cases, and works for C-like files. 'cindent' is more customizable, but also more strict when it comes to syntax.
'smartindent' and 'cindent' might interfere with file type based indentation, and should never be used in conjunction with it.
When it comes to C and C++, file type based indentations automatically sets 'cindent', and for that reason, there is no need to set 'cindent' manually for such files. In these cases, the 'cinwords', 'cinkeys' and 'cinoptions' options still apply.
Generally, 'smartindent' or 'cindent' should only be set manually if you're not satisfied with how file type based indentation works.
indentexpr
Runs filetype indent scripts found in (vimfolder)\indent\\(indentscripts). It is mentioned in the vim documentation for filetype, alongside the others just mentioned (also, it was the cause of the problem I was having):
Reset 'autoindent', 'cindent', 'smartindent' and/or 'indentexpr' to disable indenting in an opened file.
Troubleshooting
There's a chance that some rogue plugin is changing your indent settings and that's why you're getting poor results. Luckily verbose will tell you which file was the last to change the option in question.
:verbose set autoindent?
:verbose set cindent?
:verbose set smartindent?
:verbose set indentexpr?
You may get a result such as
indentexpr=SomeMessedUpValue
Last set from ~/.vim/bundle/some_plugin/indent/plaintex.vim
If that happens, you can move that file, close and open vim, and see if it fixes your problem.
Turning Off Indent Settings for TeX
Maybe the defaults just aren't doing it for you, and you want to disable the indent settings for TeX, but leave all other file types alone. You can easily do so by setting these values to their defaults in a file in the after directory.
I don't know much about Tex or LaTex, but when I created a file with the .tex extension and ran :filetype it had the filetype as plaintex. Assuming that this is correct, you'd want to create a file, ~/.vim/after/indent/plaintex.vim. In that file:
set autoindent&
set cindent&
set smartindent&
set indentexpr&
This will set all these values to their defaults whenever you open a .tex file.
There seem to be a little mix of terms in your question. In vim the term autoindent points to a special kind of indentation that simply follows the indent level of the previous line (which is quite handy sometimes). To remove it set noautoindent by hand, or write it in your _vimrc.
There are two other automatic kinds of indentation, cindent and smartindent. Similarly, if you wish to disable them go with set nocindent and set nosmartindent
If you look in help (help autoindent, ...) they are all quite nicely explained. Which one you prefer (or don't) is mostly determined by your programming style and habits. So, try them out and see which you like most.
Unfortunatelly, I don't use LaTeX that much anymore, so I'm not familiar with its internal filetype indentation rules.
For anyone else having a similar problem, a solution that worked for me was:
Use :verbose set indentexpr? to find what file was causing the de-indentation
Find where indentexpr is changed (for me it was setlocal indentexpr=GetTeXIndent())
Change that line to setlocal indentexpr& to turn indentexpr off
This removed all de-indenting from brackets, parentheses, and braces.
Remove the lines set autoindent and set smartindent to remove all vim autoindentation.
The following command finally stopped VIM from pretending it knows how to indent files for me and only do what I explicitly tell it:
:setl noai nocin nosi inde=
Courtesy https://vim.fandom.com/wiki/How_to_stop_auto_indenting
If you are using the vim-latex plugin, set this option:
let g:tex_indent_brace=0
For other plugins, if you don't want to turn off indentexpr as in the above answers, you can find where indentkeys is set and comment out those lines. This should stop triggering re-indent when you type a closing brace.
:verbose set indentkeys?
I set up the indentation in my vimrc in the following way:
set tabstop=2
set shiftwidth=2
set autoindent
set indentexpr
set expandtab
I created the indent folder in my ~/.vim/ directory and pasted an html indentation-plugin into ~/.vim/indent/ . I'm using the following one:
http://www.vim.org/scripts/script.php?script_id=2075
Whenever i try to "gg=G" in normal-mode it deletes all the indentation instead of indenting the file in a proper way. JavaScript files for example work nicely with another indentation plugin i have found, but nomatter which html plugin i have used so far, it didn't really work in a useful way.
Is there anything i can do here?
///////////////
Update:
i just tried to change the filetype to xml and it began to work. Now i'm asking myself how i can get this to work with html files. Hope someone can help me out.
Heading
It works out of the box for me. Try if it works with the minimal setup:
$ vim -u NONE
:set nocp
:filetype indent on
:set ft=html
and type in some HTML code.
The second tag should be indented by a tab now.
This has bugged me for a long time, and try as I might I can't find a way round it.
When I'm editing text (specifically latex, but that doesn't matter) files, I want it to auto-wrap at 80 columns. It does this, except if I happen to be in the middle of a parenthetical clause, it indents the text which is very annoying. For example, this works fine
Here is some text... over
two lines.
but this doesn't
Here is some text... (over
two
lines
If anyone can tell me how to turn this off (just for text/latex files) I'd be really grateful. Presumably it has something to do with the fact that this is desired behaviour in C, but I still can't figure out what's wrong.
:set nocindent
The other options do nothing, and the filetype detection doesn't change it.
There are three options you may need to turn off: set noai, set nosi, and setnocin (autoindent, smartindent, and cindent).
This may be related, when pasting from gui into terminal window, vim cannot distinguish paste modes, so to stop any odd things from occuring:
set paste
then paste text
set nopaste
I had similar issues trying to paste xml text, it would just keep indenting. :)
gvim, the gui version of vim, can detect paste modes.
You can have a look at the autoindent option :
autoindent - ai
Copy indent from current line when starting a new line (typing
in Insert mode or when using the "o" or "O" command). If you do not
type anything on the new line except and then type or
, the indent is deleted again. When autoindent is on,
formatting (with the "gq" command or when you reach 'textwidth' in
Insert mode) uses the indentation of the first line. When
'smartindent' or 'cindent' is on the indent is changed in specific
cases. The 'autoindent' option is reset when the 'paste' option is
set. {small difference from Vi: After the indent is deleted when
typing or , the cursor position when moving up or down is
after the deleted indent; Vi puts the cursor somewhere in the deleted
indent}.
From the official Vim documentation
filetype plugin indent on
This switches on three very clever
mechanisms:
Filetype detection. Whenever you start editing a file, Vim will try to
figure out what kind of file this
is. When you edit "main.c", Vim will
see the ".c" extension and
recognize this as a "c" filetype.
When you edit a file that starts with
"#!/bin/sh", Vim will recognize it as
a "sh" filetype. The filetype
detection is used for syntax
highlighting and the other two
items below. See |filetypes|.
Using filetype plugin files Many different filetypes are edited with
different options. For example,
when you edit a "c" file, it's very
useful to set the 'cindent' option to
automatically indent the lines. These
commonly useful option settings are
included with Vim in filetype plugins.
You can also add your own, see
|write-filetype-plugin|.
Using indent files When editing programs, the indent of a line can
often be computed automatically.
Vim comes with these indent rules for
a number of filetypes. See
|:filetype-indent-on| and
'indentexpr'.
:set noai
sets no auto indent tt may be smartindent though. Check out the doc and see if you can find something more
http://www.vim.org/htmldoc/indent.html