I have problem with installing automake 1.14.1 on Rapbian (2014-09-09-wheezy-raspbian) distro. I wrote sh ./configure and then I wrote make then terminal wrote me that:
$ make
CDPATH="${ZSH_VERSION+.}:" && cd . && "/home/pi/LIBRARY/automake-1.14./twrap/aclocal-1.14"
Can't locate /home/pi/LIBRARY/automake-1.14.1/bin/aclocal in #INC (#INC contains:
/etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5usr
/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at
/home/piLIBRARY/automake-1.14.1/t/wrap/aclocal-1.14 line 29.Makefile:2493: recipe
for target 'aclocal.m4' failed make: *** [aclocal.m4] Error 2
I don't know what does it mean. Can you help me what to do next?
I found out what is problem in. I use filezilla to transport automake to Raspberry Pi (running on Raspbian) in unpacked form. When I transported packed automake.tar through fillezila and then unpacked it on RPi and did installation of this one then I have no problem. However many thanks for all your answers and an effort to help me.
recipe for target 'aclocal.m4' failed make: *** [aclocal.m4] Error 2
Is saying where the failure occurred. So the failure is occurring when the make file calls aclocal.m4. This is due to that Can't locate /home/pi/LIBRARY/automake-1.14.1/bin/aclocal so check out if /home/pi/LIBRARY/automake-1.14.1/bin/aclocal can be found and if not then install what is needed to resolve the error.
I have successfully built on the same raspbian the automake-1.14.1 from ftp.gnu.org/gnu/automake source tarball. The bin/aclocal script should be created at 'make' stage. Makefile.in is already included in the tarball. There can be several reasons to such errors as you typed in your message:
Wrong distribution source is being used: use any from ftp.gnu.org/gnu/automake, http://ftp.gnu.org/gnu/automake/automake-1.14.1.tar.xz
you don't have space enough to create bin/aclocal stage at 'make' stage, check df output
there are problems with fs consistency, read dmesg.
Related
I keep getting make: * [internal-package] Error 2 when trying to build a tweak I'm working on. Ive never had this issue before, and its not specifying whats wrong. Here is what it says:
yinyongzhen#eagle:Desktop/tingtweak ‹master*›$ make package
Making all for tweak tingtweak…
make[2]: Nothing to be done for internal-library-compile'.
Making stage for tweak tingtweak…
dm.pl: building packagecom.yz.tingtweak:iphoneos-arm' in `./packages/com.yz.tingtweak_0.0.1-1+debug_iphoneos-arm.deb'
open2: exec of lzma -c0 failed at /Users/yinyongzhen/theos/bin/dm.pl line 113.
make: *** [internal-package] Error 2
Try running the lzma command in terminal, if it's missing, you need to:
brew install xz
For those facing the same issue, make sure dpkg is installed on your machine. It is require for Theos. Installing it will get rid of the error with lzma (it seems to be part of).
brew install dpkg
I have a problem by compiling a driver (WLAN-dongle Edimax ac600).
I´m using an Archlinux on my raspberry-pi and want to install my dongle for 5Ghz. During comiling the driver I get this message. I tried to install the linux-headers without success. (in other threads it will be a solution)
Here is my output of make:
[root#raspberry_pi_1 rtl8812AU]# make make ARCH=arm CROSS_COMPILE= -C
/lib/modules/4.9.43-1-ARCH/build M=/root/rtl8812AU modules make[1]:
*** /lib/modules/4.9.43-1-ARCH/build: No such file or directory. Stop. make: *** [Makefile:1576: modules] Error 2
I found out that my pi has a two-arch...-directories:
4.9.43-1-ARCH/
4.9.51-1-ARCH/
Only the second one has the build directory...
How can I fix the problem?!
thanks a lot,
a Linux noob...
[Reputation is too low to post comment]
Use uname -r to make sure which version of the kernel you use.
If it's 4.9.43 : you have newer version of the kernel and this confuse your installer. You should reboot on the 51 one
If it's 4.9.51 : You messed up your installation step and are trying to compile for an old target. You should review the compilation process and change every mention of the 4.9.43 to 4.9.51 since it's the version you use.
If you upgrade your kernel, you may have to rebuild the thing again (You may like to have script in the future ;) ) with the new kernel version.
Trying to build recent version of u-boot bootloader for my mini2440 ARM board I managed to download a toolchain package from codesourcery and extract it to following path: /usr/local/arm-2008q3/
I also exported following values for current session:
export PATH=$PATH:/usr/local/arm-2008q3/bin
export CROSS_COMPILE=arm-none-linux-gnueabi-
When I run make I get a following output and I cant figure out why:
make: arm-none-linux-gnueabi-gcc: Command not found
for dir in tools examples api_examples ; do make -C $dir _depend ; done
make[1]: arm-none-linux-gnueabi-gcc: Command not found
make[1]: Entering directory `/home/deth/uboot/mini2440/tools'
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory `/home/deth/uboot/mini2440/tools'
make[1]: arm-none-linux-gnueabi-gcc: Command not found
make[1]: Entering directory `/home/deth/uboot/mini2440/examples'
/bin/sh: 1: arm-none-linux-gnueabi-gcc: not found
I double checked everything and binaries indeed reside in mentioned folder but... Please explain where I'm wrong.
Well, after almost three days of headbanging into the wall I managed to solve this. To be honest I might have never solved it if occasionally hadn't installed the COdesourcery toolchain with executable installer which they also provide. After doing that the manually unpacked version started to execute! This of course led to a conclusion that there were libraries missing. I tried to reproduce the problem on separate virtual machine and voila, here are couple of words that solved the whole issue:
sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0
Hope this will help someone, and thanks to everyone for help!
I am trying to install QODBC drivers on ubuntu 13.10 for Qt 5.0.2. I have followed the official documentation (see http://qt-project.org/doc/qt-5/sql-driver.html#qodbc) but am stuck at one of the steps. When I try to do
qmake "INCLUDEPATH+=/usr/local/unixODBC/include" "LIBS+=-L/usr/local/unixODBC/lib -lodbc"
it just shows me the help manual for qmake and does nothing.
So I tried to make an empty Makefile and then passed it as an argument
qmake "INCLUDEPATH+=/usr/local/unixODBC/include" "LIBS+=-L/usr/local/unixODBC/lib -lodbc" Makefile
when I try to "make" the generated Makefile, it shows the following errors:
Makefile:183: warning: overriding commands for target `Makefile'
Makefile:130: warning: ignoring old commands for target `Makefile'
make: Circular Makefile <- Makefile dependency dropped.
make: Circular Makefile <- Makefile dependency dropped.
make: Nothing to be done for `first'.
I have just managed to make the odbc driver installation. The main problem here seems to be that you are not including the "pro" target file.
Here all the steps are:
Go to odbc pluggin path. In my case: cd ~/Qt/5.3/Src/qtbase/src/plugins/sqldrivers/odbc
Run qmake including the target LIB paths and also the pro file:
~/Qt/5.3/gcc_64/bin/qmake -makefile "INCLUDEPATH+=/usr/local/include" "LIBS+=-L/usr/local/lib -lodbc" odbc.pro
make and then sudo make install
I hope it will be usefull.
Regards,
I'm trying to install glibc to debug a C-framework I'm working on. But, I'm getting an error in the build process. Here's the error msg:
make[3]: Leaving directory `/root/glibc-source/glibc-2.14/elf'
/usr/bin/install -c /root/glibc-2.14-build/elf/ld.so /usr/local/myglibc/lib/ld-2.14.so.new
mv -f /usr/local/myglibc/lib/ld-2.14.so.new /usr/local/myglibc/lib/ld-2.14.so
/usr/bin/install -c /root/glibc-2.14-build/libc.so /usr/local/myglibc/lib/libc-2.14.so.new
mv -f /usr/local/myglibc/lib/libc-2.14.so.new /usr/local/myglibc/lib/libc-2.14.so
echo ld-2.14.so /usr/local/myglibc/lib/ld-linux-x86-64.so.2 >> /root/glibc-2.14-build/elf/symlink.list
/usr/bin/install -c /root/glibc-2.14-build/elf/sotruss-lib.so /usr/local/myglibc/lib/audit/sotruss-lib.so.new
mv -f /usr/local/myglibc/lib/audit/sotruss-lib.so.new /usr/local/myglibc/lib/audit/sotruss-lib.so
make[2]: *** No rule to make target `/root/glibc-2.14-build/dlfcn/libdl.so.2', needed by `/root/glibc-2.14-build/elf/sprof'. Stop.
make[2]: Leaving directory `/root/glibc-source/glibc-2.14/elf'
make[1]: *** [elf/subdir_install] Error 2
make[1]: Leaving directory `/root/glibc-source/glibc-2.14'
make: *** [install] Error 2
Is this a known problem?
I had built glibc on the same machine earlier last week without any errors. I'm rebuilding it because glibc is compiled with optimization level 2(-O2) by default and I'm unable to look into the values of a few variables inside the library functions from the code dump as they've been optimized out. I'm currently trying to compile with optimization level 1.
Thanks
It looks like you are trying to make install, without first doing a successful make all.
This is for the benefit of anyone who might be trying to build glibc on their ubuntu box.
I went through the following problems and resolved them the following way.
These problems were encountered in ubuntu 12.04
I created a directory glib-build on the same level as the glib-VERSION and ran the following command
$> ../glibc-2.16.0/configure --prefix=/home/gugovind/tsapp/glibc/glibc-build/
that gave me the following error that makeinfo is missing.
for that
$>sudo apt-get install texinfo
will resolve the problem.
It threw and error about LD_LIBRARY_PATH having the current directory (even if it does not exist)
for that run the following in your command prompt
$>set LD_LIBRARY_PATH
this will clear the LD_LIBRARY_PATH only for that console temporarily. Then run the configure again.
You might encounter another problem with configure..
"function strtonum never defined"
look at the config.log file and it might be missing mawk or gawk. install them using
sudo apt-get install gawk
This should get you through the configure part.
now run
make all
if in case you encounter a particular file not compiling.. just copy the gcc ... before that and paste it in the command prompt again after you have cd to that directory (the command lines before the error should tell you where to go.)
make install
You might get a warning about not able to find etc/ld.config... file. ignore that..
you are all set now.