I have a 2 column sorted view and try to get a document the following code:
var searchArr = new java.util.Vector();
searchArr.addElement(10000310);
searchArr.addElement(45);
var customerdoc:NotesDocument = viw.getDocumentByKey(searchArr,true);
but the result is null.
If I use only the first element for the key (10000310), then I get (the first) doc with that key. But with the 2-element-vector the lookup returns null.
the same in LotusScript works fine:
Dim searchkey(1) As Double
searchkey(0) = 10000307
searchkey(1) = 45
Set doc = luview.Getdocumentbykey(searchkey, true)
gives me the document I need.
Confusing, for me ....
Uwe
This is a known bug, hopefully to be fixed in 9.0.2. See this question getDocumentByKey with view category separated by "\\" in XPages
Your LS example uses an array, not a Vector. I am not even sure if it is intended to work with a Vector - never did that. So just use an array here, too, as the key.
Related
I'm using the Chrome driver and Selenium tools in my CodedUI tests. I can find the element I need using the SearchProperties and a Contains operator however I need the full Id for subsequent searches.
For example I need to find an input element with Id "pm_modal_28".
This is easy enough by doing a search where Id contains "pm_modal".
I then need to parse the value "28" out of the Id that was found so I can search for the next nested element which has an Id of "dp_28".
When I use the Id property of HtmlDiv I get a NotSupportedException. Is there anyway I can get all of the Html attributes from an Element or get the Id from an element after it has been found?
Not sure if this what you are after, once the control is identified, you would have all its properties to play around with.
For example
var control = new HtmlDiv ();
control.SearchProperties.Add("Id", "MyDiv_28");
if (!control.TryFind()) return;
var newControl = new HtmlDiv();
newControl.SearchProperties.Add("Id", control.Id.Split('_')[1]);
newControl.TryFind();
HtmlDiv myDiv = new HtmlDiv(browser);
//Add the search logic u want !
myDiv.SearchProperties.Add("class", "ClassName");
string onewayforID = myDiv.Id;
string anotherWay = myDiv.GetProperty(HtmlDiv.PropertyNames.Id).ToString(); // Or u can simpy pass "Id"
See if that Works !
I have a list AllIDs:
List<IAddress> AllIDs = new List<IAddress>();
I want to do substring operation on a member field AddressId based on a character "_".
I am using below LINQ query but getting compilation error:
AllIDs= AllIDs.Where(s => s.AddressId.Length >= s.AddressId.IndexOf("_"))
.Select(s => s.AddressId.Substring(s.AddressId.IndexOf("_")))
.ToList();
Error:
Cannot implicitly convert type 'System.Collections.Generic.List<string>' to 'System.Collections.Generic.List<MyCompany.Common.Users.IAddress>'
AllIDs is a list of IAddress but you are selecting a string. The compiler is complaining it cannot convert a List<string> to a List<IAddress>. Did you mean the following instead?
var substrings = AllIDs.Where(...).Select(...).ToList();
If you want to put them back into Address objects (assuming you have an Address class in addition to your IAddress interface), you can do something like this (assuming the constructor for Address is in place):
AllIDs = AllIDs.Where(...).Select(new Address(s.AddressID.Substring(s.AddressID.IndexOf("_")))).ToList();
You should also look at using query syntax for LINQ instead of method syntax, it can clean up and improve the readability of a lot of queries like this. Your original (unmodified) query is roughly equivalent to this:
var substrings = from a in AllIDs
let id = a.AddressId
let idx = id.IndexOf("_")
where id.Length >= idx
select id.Substring(idx);
Though this is really just a style thing, and this compiles to the same thing as the original. One slight difference is that you only have to call String.IndexOf() one per entry, instead of twice per entry. let is your friend.
Maybe this?
var boundable =
from s id in AllIDs
where s.AddressId.Length >= s.AddressId.IndexOf("_")
select new { AddressId = s.AddressId.Substring(s.AddressId.IndexOf("_")) };
boundable = boundable.ToList();
I have set an attribute set in my Magento shop which has several binary attributes.
For a pulldown I need a list of ALL the attributes inside this one attribute set, including their internal name and their label. Since this pulldown should appear in places that not necessarily have a product selected I can't go the usual route of "getting the attributes of a product".
How do I go about of getting a list of all the attributes inside my set?
OK, I realised that I missed that you want the whole set of attributes, not just an individual one. Try this:
$productEntityType = Mage::getModel('eav/entity_type')->loadByCode(Mage_Catalog_Model_Product::ENTITY);
$attributeSetCollection = Mage::getResourceModel('eav/entity_attribute_set_collection');
$attributesInfo = Mage::getResourceModel('eav/entity_attribute_collection')
->setEntityTypeFilter($productEntityType->getId()) //4 = product entities
->addSetInfo()
->getData();
You'll then need to iterate through the array that is returned with something like:
foreach($attributesInfo as $attribute):
$attribute = Mage::getModel('eav/entity_attribute')->load($attribute['attribute_id']);
echo 'label = '.$attribute->getFrontendLabel().'<br/>';
echo 'code = '.$attribute->getAttributeCode().'<br/><br/>';
endforeach;
Sorry for missing the original point, hope this helps!
Cheers,
JD
In order to get all the attributes in an attribute set, you can use as:
$entityTypeId = Mage::getModel('eav/entity')
->setType('catalog_product')
->getTypeId();
$attributeSetName = 'Default'; //Edit with your required Attribute Set Name
$attributeSetId = Mage::getModel('eav/entity_attribute_set')
->getCollection()
->setEntityTypeFilter($entityTypeId)
->addFieldToFilter('attribute_set_name', $attributeSetName)
->getFirstItem()
->getAttributeSetId();
$attributes = Mage::getModel('catalog/product_attribute_api')->items($attributeSetId);
foreach($attributes as $_attribute){
print_r($_attribute);
}
Cheers!!
try this snippet, it should give you want you need, except for multi-select attributes.
$attribute = Mage::getModel('eav/config')->getAttribute('catalog_product','attribute_name');
foreach($attribute->getSource()->getAllOptions(true,true) as $option){
$attributeArray[$option['value']] = $option['label'];
}
return $attributeArray;
Hope this helps,
JD
Each input field in the CKEditor dialogs are renamed with a unique number, but the number changes depending on what options are visible.
I need to reference 'txtUrl' which has an id something like #35_textInput.
So far I have discovered that something like this should work:
alert(CKEDITOR.instances.myElement.document.$.body.getId('txtUrl'));
But it doesn't. Please help.
#Rio, your solution was really close! This was the final solution:
var dialog = CKEDITOR.dialog.getCurrent();
dialog.setValueof('info','txtUrl',"http://google.com");
return false;
var dialog = this.getDialog();
var elem = dialog.getContentElement('info','txtUrl');
within an onchange part of an element I now use
dialog = this.getDialog();
alert(dialog.getContentElement('info', 'grootte').getInputElement().$.id);
and it gives 'cke_117_select' as a result. (It's a selectbox)
alert(dialog.getContentElement('info', 'txtUrl').getInputElement().$.id);
gives 'cke_107_textInput'.
I think this is what you (or other visitors to this page) are looking for.
SetValueOf still doesn't provide the id, which you may need if you want to do more than fill a text field with a certain text.
Using SubSonic 2.2, I have this query:
string q = #"SELECT Media.Id, Media.Title FROM Media WHERE Media.UserId = 7"
DAL.MediumCollection matches = new InlineQuery().ExecuteAsCollection<DAL.MediumCollection>(q).Load();
Looping through "matches" results in every single entry in the "Media" table.
However, when I do this:
IDataReader reader = new InlineQuery().ExecuteReader(q);
It returns the correct rows. Why is ExecuteAsCollection returning something completely different from ExecuteReader? Has anyone else experience this strange behavior?
I think it's because you're calling .Load(). That's overwriting your original query.
ExecuteAsCollection() should do it.
When you call the Load() method it's just like doing new DAL.MediumCollection().Load() that returns all the data in the table.