How to yum install Node.JS on Amazon Linux - node.js

Question

I've seen the writeup on using yum to install the dependencies, and then installing Node.JS & NPM from source. While this does work, I feel like Node.JS and NPM should both be in a public repo somewhere.
How can I install Node.JS and NPM in one command on AWS Amazon Linux?

Answer 1

Stumbled onto this, was strangely hard to find again later. Putting here for posterity:
sudo yum install nodejs npm --enablerepo=epel
EDIT 3: As of July 2016, EDIT 1 no longer works for nodejs 4 (and EDIT 2 neither). This answer (https://stackoverflow.com/a/35165401/78935) gives a true one-liner.
EDIT 1: If you're looking for nodejs 4, please try the EPEL testing repo:
sudo yum install nodejs --enablerepo=epel-testing
EDIT 2: To upgrade from nodejs 0.12 installed through the EPEL repo using the command above, to nodejs 4 from the EPEL testing repo, please follow these steps:
sudo yum rm nodejs
sudo rm -f /usr/local/bin/node
sudo yum install nodejs --enablerepo=epel-testing
The newer packages put the node binaries in /usr/bin, instead of /usr/local/bin.
And some background:
The option --enablerepo=epel causes yum to search for the packages in the EPEL repository.
EPEL (Extra Packages for Enterprise Linux) is open source and free community based repository project from Fedora team which provides 100% high quality add-on software packages for Linux distribution including RHEL (Red Hat Enterprise Linux), CentOS, and Scientific Linux. Epel project is not a part of RHEL/Cent OS but it is designed for major Linux distributions by providing lots of open source packages like networking, sys admin, programming, monitoring and so on. Most of the epel packages are maintained by Fedora repo.
Via http://www.tecmint.com/how-to-enable-epel-repository-for-rhel-centos-6-5/

Answer 2

Like others, the accepted answer also gave me an outdated version.
Here is another way to do it that works very well:
$ curl --silent --location https://rpm.nodesource.com/setup_16.x | bash -
$ yum -y install nodejs
You can also replace the 16.x with another version, such as 18.x, 14.x, etc.
You can see all available versions on the NodeSource Github page, and pull from there as well if desired.
Note: you may need to run using sudo depending on your environment.

Answer 3

The accepted answer gave me node 0.10.36 and npm 1.3.6 which are very out of date. I grabbed the latest linux-x64 tarball from the nodejs downloads page and it wasn't too difficult to install: https://nodejs.org/dist/latest/.
# start in a directory where you like to install things for the current user
(For noobs : it downloads node package as node.tgz file in your directlry)
curl (paste the link to the one you want from the downloads page) >node.tgz
Now upzip the tar you just downloaded -
tar xzf node.tgz
Run this command and then also add it to your .bashrc:
export PATH="$PATH:(your install dir)/(node dir)/bin"
(example : export PATH ="$PATH:/home/ec2-user/mydirectory/node/node4.5.0-linux-x64/bin")
And update npm (only once, don't add to .bashrc):
npm install -g npm
Note that the -g there which means global, really means global to that npm instance which is the instance we just installed and is limited to the current user. This will apply to all packages that npm installs 'globally'.

Answer 4

Simple install with NVM...
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.2/install.sh | bash
. ~/.nvm/nvm.sh
nvm install node
To install a certain version (such as 18.12.1) of Node change the last line to
nvm install 18.12.1
For more information about how to use NVM visit the docs:
https://github.com/nvm-sh/nvm

Answer 5

The procedure that worked for me (following these rather old instructions with a few updates):
check git is installed git --version or install it via:
sudo yum install git
install gcc and openssl:
sudo yum install gcc-c++ make
sudo yum install openssl-devel
clone the git repo into a directory called node (which you can remove later):
git clone https://github.com/nodejs/node.git
decide which version of node you want at https://github.com/nodejs/node/releases
go to the node directory just created and install node
cd node
git checkout v6.1.0 - put your desired version after the v
./configure
make
sudo make install
test that node is installed / working with either node --version or simply node (exit node via process.exit() or ^C x 2 or ^C + exit)
check the npm version: npm --version and update if necessary via sudo npm install -g npm
Optional: remove the node directory with rm -r node
Notes:
The accepted answer didn't work since sudo yum install nodejs --enablerepo=epel-testing returns the error: No package nodejs available.
...and sudo yum install nodejs --enablerepo=epel (ie without -testing) only gave very old versions.
If you already have an old version of node installed you can remove it with:
sudo npm uninstall npm -g ...since npm can uninstall itself
sudo yum erase nodejs
sudo rm -f /usr/local/bin/node
(sudo yum rm nodejs in the accepted answer won't work as rm is not a valid yum command see yum --help)
It's possible to clone the node repo via git clone git://github.com/nodejs/node.git rather than git clone https://github.com/nodejs/node.gitbut you may get a various errors (see here).
If you already have a /node dir from a previous install, remove it before using the git clone command (or there'll be a conflict):
rm -r node
If you have trouble with any sudo npm... command - like sudo: npm: command not found and/or have permissions issues installing node packages without sudo, edit sudo nano /etc/sudoers and add :/usr/local/bin to the end of the line Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin so that it reads Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin

Answer 6

Seems no one is mentioning this. On Amazon Linux 2, official way to load EPEL is:
sudo amazon-linux-extras install epel
...then you may:
sudo yum install nodejs
See Extras Library (Amazon Linux 2)

Answer 7

For the v4 LTS version use:
curl --silent --location https://rpm.nodesource.com/setup_4.x | bash -
yum -y install nodejs
For the Node.js v6 use:
curl --silent --location https://rpm.nodesource.com/setup_6.x | bash -
yum -y install nodejs
I also ran into some problems when trying to install native addons on Amazon Linux. If you want to do this you should also install build tools:
yum install gcc-c++ make

Answer 8

I just came across this. I tried a few of the more popular answers, but in the end, what worked for me was Amazon's quick setup guide.
Tutorial: Setting Up Node.js on an Amazon EC2 Instance
The gist of the tutorial is:
Make sure you are ssh'd onto the instance.
Grab nvm: curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.0/install.sh | bash
Active . ~/.nvm/nvm.sh
Install node using nvm nvm install 4.4.5 (NOTE: You can choose a different version. Check out the remote versions first by running $ nvm ls-remote)
Finally, test that you have installed node Node correctly by running $ node -e "console.log('Running Node.js' + process.version)"
Hopefully this helps the next person.

Answer 9

RHEL, CentOS, CloudLinux, Amazon Linux or Fedora:
# As root
curl -fsSL https://rpm.nodesource.com/setup_12.x | bash -
# No root privileges
curl -fsSL https://rpm.nodesource.com/setup_12.x | sudo bash -
sudo yum install -y nodejs

Answer 10

I had Node.js 6.x installed and wanted to install Node.js 8.x.
Here's the commands I used (taken from Nodejs's site with a few extra steps to handle the yum cached data):
sudo yum remove nodejs: Uninstall Node.js 6.x (I don't know if this was necessary or not)
curl --silent --location https://rpm.nodesource.com/setup_8.x | sudo bash -
sudo yum clean all
sudo yum makecache: Regenerate metadata cache (this wasn't in the docs, but yum kept trying to install Node.jx 6.x, unsuccessfully, until I issued these last two commands)
sudo yum install nodejs: Install Node.js 8.x

Answer 11

sudo yum install nodejs npm --enablerepo=epel works for Amazon Linux AMI.
curl --silent --location https://rpm.nodesource.com/setup_6.x | bash -
yum -y install nodejs
works for RedHat.

Answer 12

The easiest solution is this( do these as root)
sudo su root
cd /etc
mkdir node
yum install wget
wget https://nodejs.org/dist/v9.0.0/node-v9.0.0-linux-x64.tar.gz
tar -xvf node-v9.0.0-linux-x64.tar.gz
cd node-v9.0.0-linux-x64/bin
./node -v
ln -s /etc/node-v9.0.0-linux-x64/bin/node node

Answer 13

https://nodejs.org/en/download/package-manager/#debian-and-ubuntu-based-linux-distributions
curl --silent --location https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum -y install nodejs

Answer 14

Official Documentation for EC2-Instance works for me: https://docs.aws.amazon.com/sdk-for-javascript/v2/developer-guide/setting-up-node-on-ec2-instance.html
1. curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.0/install.sh | bash
2. . ~/.nvm/nvm.sh
3. nvm ls-remote (=> find your version x.x.x =>) nvm install x.x.x
4. node -e "console.log('Running Node.js ' + process.version)"

Answer 15

MAY 2022
I spent way too long on this. My Amazon Linux 2 configuration, running as root.
#!/usr/bin/env zsh
# https://stackoverflow.com/questions/11542846/nvm-node-js-recommended-install-for-all-users
echo "=================================N=O=D=E========================================"
cd /usr/local/bin || exit 90
git clone https://github.com/nvm-sh/nvm.git .nvm
\. "/usr/local/bin/.nvm/nvm.sh"
nvm install --lts
node -e "console.log('Running Node.js ' + process.version)"
cat << "EOF" > /etc/profile.d/npm.sh
#!/usr/bin/env bash
export NVM_DIR="/usr/local/bin/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm'}
EOF
chmod 755 /etc/profile.d/npm.sh
npm install -g npm
June 2022 - The system really hates when things arn't linked in the bin. Here's a small update to help if you need things accessible by other users. Admittedly adding /etc/profile.d/npm.sh is just what nvm suggests, but I find it over-rated. I think it could be removed in place of purely the ln -s. happy hacking
#!/bin/zsh
# https://stackoverflow.com/questions/11542846/nvm-node-js-recommended-install-for-all-users
echo "=================================N=O=D=E========================================"
cd /usr/local/bin || exit 90
git clone https://github.com/nvm-sh/nvm.git .nvm
# this uncontrolled script has an unbound variable $HOME
# #link https://github.com/Drop-In-Gaming/dropingaming.com/runs/6437329820?check_suite_focus=true
\. "/usr/local/bin/.nvm/nvm.sh" || true
# todo - try to install 18
nvm install --lts
nvm install 17
node -e "console.log('Running Node.js ' + process.version)"
cat << "EOF" > /etc/profile.d/npm.sh
#!/usr/bin/env bash
export NVM_DIR="/usr/local/bin/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm'}
EOF
echo 'source /etc/profile.d/npm.sh' >> /root/.bashrc
echo 'source /etc/profile.d/npm.sh' >> /root/.zshrc
echo 'source /etc/profile.d/npm.sh' >> /home/ssm-user/.bashrc
echo 'source /etc/profile.d/npm.sh' >> /home/ssm-user/.zshrc
echo 'source /etc/profile.d/npm.sh' >> /home/www-data/.bashrc
echo 'source /etc/profile.d/npm.sh' >> /home/www-data/.zshrc
chmod 755 /etc/profile.d/npm.sh
npm install -g npm
echo "===========================WHERE==IS==NODE==========================="
which node
which npm
echo "symlinking to /usr/bin/"
if [ -e /usr/bin/node ]; then
sudo rm -f /usr/bin/node
fi
if [ -e /usr/bin/npm ]; then
sudo rm -f /usr/bin/npm
fi
sudo ln -s "$(which node)" /usr/bin/
sudo ln -s "$(which npm)" /usr/bin/

Answer 16

For those who want to have the accepted answer run in Ansible without further searches, I post the task here for convenience and future reference.
Accepted answer recommendation: https://stackoverflow.com/a/35165401/78935
Ansible task equivalent
tasks:
- name: Setting up the NodeJS yum repository
shell: curl --silent --location https://rpm.nodesource.com/setup_10.x | bash -
args:
warn: no
# ...

Answer 17

As others mentioned using epel gives a really outdated version, here is a little script I just wrote instead to add to the CI pipeline or pass it to ec2 user-data to install the latest version of node, simply replace the version with what you want, and the appropriate distro of Linux you are using.
The following example is for amazon-Linux-2-AMI
#!/bin/bash
version='v14.13.1'
distro='linux-x64'
package_name="node-$version-$distro"
package_location="/usr/local/lib/"
curl -O https://nodejs.org/download/release/latest/$package_name.tar.gz
tar -xvf $package_name.tar.gz -C $package_location
rm -rfv $package_name.tar.gz
echo "export PATH=$package_location/$package_name/bin:\$PATH" >> ~/.profile
if you want to test it in the same shell simply run
. ~/.profile

Answer 18

I usually use NVM to install node on server. It gives me option to install multiple version of nodejs.
Commands are given below :
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.35.3/install.sh | bash
then check if it's installed properly using :
command -v nvm
after that, run this to install latest version :
nvm install node
or
nvm install 11

Answer 19

As mentioned in official documentation , simple below 2 steps -
curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
sudo apt-get install -y nodejs

Answer 20

You can update/install the node by reinstalling the installed package to the current version which may save us from lotta of errors, while doing the update.
This is done by nvm with the below command. Here, I have updated my node version to 8 and reinstalled all the available packages to v8 too!
nvm i v8 --reinstall-packages-from=default
It works on AWS Linux instance as well.

Answer 21

As stated in the Amazon docs (Setting Up Node.js on an Amazon EC2 Instance), just run the following commands:
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.34.0/install.sh | bash
. ~/.nvm/nvm.sh
nvm install --lts
Done!