I would like to map Control + F3 with map <c-f3> :w <CR> :make <CR><CR><CR>. When I leave out the Control this works fine. With control from normal command mode insert mode is entered and 1;5R is inserted into the buffer.
When I use a simpler command e.g. map <c-f3> dd this works as expected.
With Shift instead of control I get a similar behavior (1;2R inserted into buffer). What can I do get my mapping right?
Edit: I want the command to be executed from normal command mode. However, vim enters insert mode, which is not desired.
The combination of function keys and modifiers is problematic in terminal Vim; whether this works depends on the terminal.
Check your $TERM value; a wrong one can cause these problems. Also, your termcap database must be correct and complete.
Try out another terminal (gnome-terminal vs. konsole vs. xterm); it may work there.
Alternatively, use GVIM; it doesn't have these problems (but still can't map some other combinations).
If you use varying terminals, it's best to avoid these key combinations, and just use plain <F1..12>, and <Leader>... for the rest.
map defines keystrokes for normal, visual and operation modes. For insert mode you should use imap.
Something like this I believe: imap <c-f3> <esc>:w :make <cr><cr><cr>. <ESC> puts the Vim to normal mode.
:he :key-mapping for explaining.
Related
The following items are useful to me in editing text, and I was wondering if vim had something for this built out of the box (though I didn't see it on the https://vimhelp.org/index.txt.html#index.txt page), or I had to create mappings for it:
Forward-delete a character. This is X in normal mode.
Forward-delete all text to the right of the cursor on the line. This is the inverse of ctrl-u.
Are either of these mappings available? And if not, are there 'standard' mappings for this that are common (for example, how it might be done in another unix program).
Note that this is the keyboard I have -- there is only one delete key (which acts like a normal backspace key) and there is no backspace key:
Note: for forward-delete, I am currently mapping ctrl-d as:
"Ctrl-d to forward-delete when in insert or command mode
noremap! <C-d> <Delete>
However, this interferes with the tab in insert mode (which I don't use) and the help-options in command mode (which I do use!) so I may have to modify this later, or hopefully someone suggests a better solution.
though I didn't see it on the https://vimhelp.org/index.txt.html#index.txt page
If you can't find it in the documentation, then it doesn't exist.
You can use fn+delete for "Forward-delete a character".
"Forward-delete all text to the right of the cursor on the line" is ctrl+k in MacOS, but Vim has its own use for that combo, :help i_ctrl-k so it is up to you to create a mapping for it.
Something like:
inoremap <key> <C-o>ld$
Is it possible for the terminal to detect ⇧ Shift+Enter↵ or Ctrl+Enter↵ keypresses?
I am trying to configure vim to do key mappings that use these sequences, and while they work fine in gvim, they don't seem to work in any terminal console.
The curious thing is that although Ctrl+Enter↵ is not detected in vim, mapping Enter↵ to Esc maps properly, but then pressing Ctrl+Enter↵ behaves like Enter↵!
Some terminals send <NL> when <C-Enter> is pressed. This is equivalent to sending <C-J>.
To find out what your terminal does with <Shift-Enter>, <Ctrl-Enter> and <Enter>, go to your terminal, type <Ctrl-V> (similar to sykora's suggestion for vim), and type in the sequence you're interested in.
Using gnome-terminal, I get the following:
<Enter> : ^M
<S-Enter> : ^M
<C-Enter> : <NL>
Looking at man ascii indicates that ^M gives the <CR> sequence.
The answer is that it depends on the terminal, and there's an easy way to check.
Gvim runs its own manager for keystroke handling and so can pick up all the various key combinations. Vim is reliant on the specific terminal for passing on the particular keypress, so keyhandling is only as good or varied as the terminal is.
One way you can find out whether you can do what you want to do is to use the key to find out what is inserted. eg Type:
:<C-V><C-Enter>
ie actually type in the combination you want to press after having typed the combination Control-V. After that do the same thing for enter, ie
:<C-V><Enter>
If they yield the same code, then the terminal interprets both key combinations as the same keycode, and you can't bind them without messing with the terminal.
In my terminal (urxvt), Control-Enter, Shift-Enter and Enter (by itself) all produce the ^M character, meaning I can't map one without mapping the other. The same goes for Control-Tab and Control-I, and Control-Space and Control-#
EDIT: Use C-Q instead of C-V for Windows.
I successfully defined a mapping to be invoked with ALT+w like so :map <M-w> ....
Yet, if I try to define a new mapping to be invoked with ALT+r like so :map <M-r> ... it doesn't work. Instead, the character ò (if the mapping is invoked in insert mode) is inserted. This is the same character that is inserted without mappings at all (and also with gvim started with gvim -u NONE).
I don't understand why one mapping works and the other doesn't.
Edit to answer some quiestions
I am working on a german Windows 7. The current keyboard layout is English (USA)
When I press Alt+w in insert mode without mapping, I get a ÷.
Both mappings works on my machine.
Maybe there is some problem with your mapping command, or it is still being changed by some setting you are using. Despite of using u -NONE you could try some other switches, as -U and -i; more info on this can be found on vim faq 36.12. You could also try with noremap instead of map.
"20.4. I am not able to create a mapping for the key. What is wrong?" has some additional suggestions.
I'm running Vim on a gnome terminal. But the alt key mappings are not working. For example:
:imap <A-i> <Esc>
It works fine in GVim. But when I run the same command with Vim in the gnome terminal it does nothing.
I'm using Windows 7, The problem is with the terminal, right?
The problem
There are two ways for a terminal emulator to send an Alt key (usually called a Meta key as actual terminals didn't have Alt). It can either send 8 bit characters and set the high bit when Alt is used, or it can use escape sequences, sending Alt-a as <Esc>a. Vim expects to see the 8 bit encoding rather than the escape sequence.
Some terminal emulators such as xterm can be set to use either mode, but Gnome terminal doesn't offer any such setting. To be honest in these days of Unicode editing, the 8-bit encoding is not such a good idea anyway. But escape sequences are not problem free either; they offer no way of distinguishing between <Esc>j meaning Alt-j vs pressing Esc followed by j.
In earlier terminal use, typing Escj was another way to send a Meta on a keyboard without a Meta key, but this doesn't fit well with vi's use of Esc to leave insert mode.
The solution
It is possible to work around this by configuring vim to map the escape sequences to their Alt combinations.
Add this to your .vimrc:
let c='a'
while c <= 'z'
exec "set <A-".c.">=\e".c
exec "imap \e".c." <A-".c.">"
let c = nr2char(1+char2nr(c))
endw
set timeout ttimeoutlen=50
Alt-letter will now be recognised by vi in a terminal as well as by gvim. The timeout settings are used to work around the ambiguity with escape sequences. Esc and j sent within 50ms will be mapped to <A-j>, greater than 50ms will count as separate keys. That should be enough time to distinguish between Meta encoding and hitting two keys.
If you don't like having timout set, which times out for other mapped key sequences (after a second by default), then you can use ttimeout instead. ttimeout applies only to key codes and not other mappings.
set ttimeout ttimeoutlen=50
For Gnome-terminal, use the following instead:
imap ^[i <Esc>
^[i should be typed by pressing Ctrl-v Alt-i
Attention: You need to yank and put in Vim when you want to copy it elsewhere. If you just copy the mapping in an editor like gedit, the mapping will probably be broken.
EDIT here is an example which makes Alt-k add an empty line above the cursor, and Alt-j add an empty line after the current line.
" Alt-j/k to add a blank line
if has('gui_running')
" the following two lines do not work in vim, but work in Gvim
nnoremap <silent><A-j> :set paste<CR>m`o<Esc>``:set nopaste<CR>
nnoremap <silent><A-k> :set paste<CR>m`O<Esc>``:set nopaste<CR>
else
" these two work in vim
" shrtcut with alt key: press Ctrl-v then Alt-k
" ATTENTION: the following two lines should not be
" edited under other editors like gedit. ^[k and ^[j will be broken!
nnoremap ^[k :set paste<CR>m`O<Esc>``:set nopaste<CR>
nnoremap ^[j :set paste<CR>m`o<Esc>``:set nopaste<CR>
endif
Try
<m-i>
Or, if typing alti inserts a character (like in my case, it inserts a carret: ˆ) just map to that character:
:inoremap ˆ <esc>
Be careful, because this one wouldn't work (at least in my system, MacOS 10.6). The caret waits for a letter, because it's not exactly a caret, it is a circumflex.
It may be that the shortcuts are actually from the Gnome Desktop. Try looking at the Gnome Keyboard Shortcuts tool (System menu, Preferences, Keyboard Shortcuts), which lets you view and modify the shortcuts defined on Gnome Desktop. If the key combination is assigned to a function on Gnome Desktop, then remove it and then that key combo should filter down to Vim properly.
Or you may be right that it is a problem of the terminal. Not all terminals support all key combos. Your problem may be the one described in the Vim help docs at :h map-alt-keys. The docs provide a workaround, but not a very good one.
The same thing happens to me. I searched on Google with "gnome terminal alt key", and found that someone asked almost the same question: "How to disable the alt-hotkey behavior on gnome terminal?" in the first link found. (The second link is just this question)
So, maybe you can try that:
Edit > Keyboard Shortcuts, and uncheck "Enable menu access keys"
Take a look at section 1.10 of http://vimdoc.sourceforge.net/htmldoc/map.html. It seems to indicate that gnome-terminal automatically escapes the Alt modifier, so that it doesn't switch the byte sent in the way that Vim is expecting. The document seems to indicate that there isn't really a way around this except for using a different terminal (such as xterm).
This is certainly frustrating because so far as I can tell Linux machines are also incapable of using the D (Mac's Command or Linux's Super) bindings, so at least as far as the terminal goes, we are limited to Shift and Ctrl modifiers, which is frustrating if we want to ensure that we can use all the commands we use in Gvim on terminal Vim (at least without switching terminals, towards which I'm perhaps overly stubborn - gnome-terminal is just so much prettier). I've been looking for a way around this but have been unable to find anything.
Is it possible for the terminal to detect ⇧ Shift+Enter↵ or Ctrl+Enter↵ keypresses?
I am trying to configure vim to do key mappings that use these sequences, and while they work fine in gvim, they don't seem to work in any terminal console.
The curious thing is that although Ctrl+Enter↵ is not detected in vim, mapping Enter↵ to Esc maps properly, but then pressing Ctrl+Enter↵ behaves like Enter↵!
Some terminals send <NL> when <C-Enter> is pressed. This is equivalent to sending <C-J>.
To find out what your terminal does with <Shift-Enter>, <Ctrl-Enter> and <Enter>, go to your terminal, type <Ctrl-V> (similar to sykora's suggestion for vim), and type in the sequence you're interested in.
Using gnome-terminal, I get the following:
<Enter> : ^M
<S-Enter> : ^M
<C-Enter> : <NL>
Looking at man ascii indicates that ^M gives the <CR> sequence.
The answer is that it depends on the terminal, and there's an easy way to check.
Gvim runs its own manager for keystroke handling and so can pick up all the various key combinations. Vim is reliant on the specific terminal for passing on the particular keypress, so keyhandling is only as good or varied as the terminal is.
One way you can find out whether you can do what you want to do is to use the key to find out what is inserted. eg Type:
:<C-V><C-Enter>
ie actually type in the combination you want to press after having typed the combination Control-V. After that do the same thing for enter, ie
:<C-V><Enter>
If they yield the same code, then the terminal interprets both key combinations as the same keycode, and you can't bind them without messing with the terminal.
In my terminal (urxvt), Control-Enter, Shift-Enter and Enter (by itself) all produce the ^M character, meaning I can't map one without mapping the other. The same goes for Control-Tab and Control-I, and Control-Space and Control-#
EDIT: Use C-Q instead of C-V for Windows.