I want to find the instance of a text within a set range.
The following formula will work in general and produce the following info:
=COUNTIFS($B$2:$B2;$B2)
Helper Name
1 Bob
2 Bob
1 John
2 John
3 John
However, with this formula within a Table and insert data into a new row, you get this at the second instance of John:
=COUNTIFS($B$2:$B6;$B5)
Help Name
1 Bob
2 Bob
1 John
3 John
3 John
While the second instance of John should be:
=COUNTIFS($B$2:$B5;$B5)
Since a table will automatically fill in the formula when adding another row, is there a different way to make this formula or an option to make this work?
Sadly, the following code won't work:
=COUNTIFS($B$2:$B&Row(B5);$B5)
Thanks for any support!
This is a known problem with tables, new rows and auto-filled formulas that use conventional cell references. If you maintain the table method of cell addressing, you can reshape the range parameter of COUNTIF with OFFSET and use a table cell reference for the adjoining cell in the Name column.
The formula in the first Helper column cell below the header is,
=COUNTIF(OFFSET([Name],0,0,ROW(1:1),1),[#Name])
OFFSET is another volatile function (like INDIRECT) that recalculates on any calculation cycle; not just ones where the values that affect its outcome change. If you have a large amount of data, calculation lag will quickly become annoying.
More on this at Use structured references in Excel table formulas
Related
I would like to look up a value in a range and return the value in the next row, but can't quite figure out how to do this. I especially would like to do this with formulas rather than VBA, and preferably with built-in formulas than custom (VBA) formulas, due to macro security issues.
I'm using Excel 2010. My workbook has two worksheets, "assessment" and "lookup". In lookup, I have lookup tables.
"lookup" looks something like:
Column A Column B Column C
1 Sales Engineering Manufacturing
2 Alice Bobbie Charlie
3 Dawn Edgar Frank
4 George Holly Isabel
In "assessment," I have some some drop downs from which users select one name from each column in "lookup." Based on some other criteria, I then rank these and create a new, sorted list (using INDEX() and MATCH()) that produce the selected name and corresponding column name a new sort order
Column A Column B
10 Engineering Edgar
11 Sales Alice
What I'd like is to return the name from the next row.
Column C
10 Holly
11 Dawn
But I'm having real trouble figuring out how to get there.
Assuming lookups is located at B2:D5 (change as required) and the result data is at F2:H3 (change as required) enter this formula in cell H2 then copy down.
=INDEX(
INDEX($B$2:$D$5,0,MATCH($F2,$B$2:$D$2,0)),
1+MATCH($G2,
INDEX($B$2:$D$5,0,MATCH($F2,$B$2:$D$2,0)),0))
I have two columns of data in Excel. Column A is an interaction date, and column B is a name. I'm looking to devise a way to identify repeat contacts by the same name that occur within 1 day of each other. eg:
Date Name
2016/01/01 John Wayne
2016/01/01 Paul Friesen
2016/01/01 John Wayne
2016/01/01 Alex Roschenko
2016/01/02 Paul Friesen
2016/01/02 Peter Mansbridge
2016/01/02 Jake Snake
2016/01/03 Paul Feig
2016/01/03 John Wayne
Using only this sample data, the result I would be looking for is 2 (John Wayne and Paul Friesen both repeated in =< 1 day.
I'm not sure if Excel or Access are the better tool to use for this, but I'm more experience in Excel, I just haven't been able to come up with a formula...
Use a helper column.
In a blank column put the following in row 2:
=SUM(COUNTIFS(B:B,B2,A:A,A2+{-1,0,1}))>1
This will return a column of TRUE/FALSE
Then referencing the helper column we use the following array formula:
=SUM(IF($C$2:$C$10,1/COUNTIFS($B$2:$B$10,$B$2:$B$10,$C$2:$C$10,TRUE)))
Being an array formula it needs to be confirmed with Ctrl-Shift-Enter when exiting edit mode instead of Enter. If done properly then Excel will put {} around the formula.
This formula counts the unique names that have TRUE in the helper column. So no matter how many times the name has TRUE next to it, it will only be counted once.
Assume I have the following table:
A B C
1 Week 1 Week 2
2 Melissa 114.7 82.8
3 Mike 105.5 122.5
4 Andrew 102.3 87.5
5 Rich 105.3 65.2
The names are in column A, the Week values are in Row 1. (So A1 is blank, B1 = Week 1, and A2 = Melissa.)
I'm trying to build a formula that looks at all the values in a known range (in this example, B2:C5), chooses the highest value of the bunch (here, 122.5) and returns the name of the person from Column A that got that value. If I use this formula, it works for the values in range B2:B5:
=INDEX(A2:A5,MATCH(MAX(B2:B5),B2:B5,0))
That returns Melissa but if I expand the range to include more than just column B's values, I get an #N/A returned:
=INDEX(A2:A5,MATCH(MAX(B2:C5),B2:C5,0))
The weird part (to my simple brain) is that the MATCH portion of the formula works fine, if I just put in this formula, it returns the highest value of 122.5 from C3:
=MAX(B2:C5,B2:C5,0)
So clearly something it going wrong when I'm using either the MATCH or INDEX commands.
Hopefully this makes sense and someone can point out my error?
Try this:
=INDEX(A:A,MAX((B2:C5=MAX(B2:C5))*ROW(B2:C5)))
This is an array formula and must be confirmed with Ctrl+Shift+Enter.
Note: Match can only search one vector at a time. It can be one row or one column or one array. It cannot be two or more rows or columns or a 2D array.
Do it "twice"? Please try:
=INDEX(A2:A5,IFERROR(MATCH(MAX(B2:C5),B2:B5,0),MATCH(MAX(B2:C5),C2:C5,0)))
If you are going to have up to 52/53 weeks to cope with I'd suggest instead inserting a helper column with the MAX for each row. Make that an new (inserted) ColumnA (say =MAX(C2:BC2) etc.) and a simple VLOOKUP should serve, say:
=VLOOKUP(MAX(A:A),A:B,2,0)
I have a spreadsheet where column P has a score between 1-6
The cell O4 has the following formula: =AVERAGEIFS(P8:P5000,P8:P5000,"<>6",P8:P5000,"<>0")
This formula searches for the average of the score in column P excluding 6, blanks and 0
Column O has staff names e.g John, Mark, Tim.......
What i want to do is for Cell O4 to automatically calculate the average of the figures shown in column P after i have used the filter function to show only results of a selected staff member.
I was hoping excel might be able to do this automatically however cell O4 appears to still be showing the average of the whole column P regardless of whether i have filtered or not.
I was given the formula below on another forum but it seems to be giving slightly wrong results albeit only by a small amount but i need to have the results exact if possible. Any help appreciated.
=SUMPRODUCT(1-ISNUMBER(MATCH(P8:P100,{0,6},0)),SUBTOTAL(9,OFFSET(P8,ROW(P8:P100)-ROW(P8),0,1)))/SUMPRODUCT(1-ISNUMBER(MATCH(P8:P100,{0,6},0)),SUBTOTAL(2,OFFSET(P8,ROW(P8:P100)-ROW(P8),0,1)))
Maybe
{=AVERAGE(IF((P8:P5000<>6)*(P8:P5000<>0)*SUBTOTAL(103,INDIRECT("O"&ROW(8:5000))),P8:P5000))}
will do what you want. Assuming the Filter is on column O.
The 103 in SUBTOTAL will also exclude if rows are manually hidden. If this ist unwanted and it should only exclude hidden rows, if filtered, then use 3 instead.
This is an array formula. Input it into the cell without the curly brackets and then press [Ctrl]+[Shift]+[Enter] to create the array formula.
I would create a separate table in a new sheet with all unique staff members and then perform the calculation. This way, you can quickly compare values for all staff just by scanning the table instead of having to constantly update the filter to see the values for potentially dozens or hundreds of staff. You would add the staff name range and criteria to your AVERAGEIFS formula.
For your example:
Sheet 2
A B
--- ---
1 | Staff Average
2 | Bob =AVERAGEIFS(Sheet1!$P$8:$P$5000,Sheet1!$O$8:$O$5000,A2,Sheet1!$P$8:$P$5000,"<>6",Sheet1!$P$8:$P$5000,"<>0")
3 | Mary =AVERAGEIFS(Sheet1!$P$8:$P$5000,Sheet1!$O$8:$O$5000,A3,Sheet1!$P$8:$P$5000,"<>6",Sheet1!$P$8:$P$5000,"<>0")
4 | Joe =AVERAGEIFS(Sheet1!$P$8:$P$5000,Sheet1!$O$8:$O$5000,A4,Sheet1!$P$8:$P$5000,"<>6",Sheet1!$P$8:$P$5000,"<>0")
I need a formula to return the value of Data for the last match of "Text". Row number is also acceptable. Macro is NOT acceptable. Name column is unsorted and cannot be sorted!
Only column "Name" is used as lookup value. I would rather use a/multiple helper column(s) instead of an array formula.
Row Name Data
1 Joe 10
2 Tom 20
3 Eva 30
4 Adam 40
5 Tom 21
LARGE only works with numbers, and VLOOKUP only returns the first match. LOOKUP only works sometimes, so its out too.
So if I wanted the last match for "Tom" then it should return "21".
Array formulas could be avoided with a helper column.
Suppose to have in F1 the name to match (i.e. Tom)
In the helper column row C2 enter
=IF(A2<>$F$1,0,row())
Then copy the formulas along your data.
Now the column C contains 0 for the unmatched names and the row number for the matched ones. Maxing the column yield the row of the solution.
Now the result is simple a matter of using the correct offset with the function offset:
=OFFSET(B1,max(C:C)-1,0)
PS: my copy of excel is in italian, so I can't test this english translaction of the formulas.
I think it's the easiest way to make it.
=LOOKUP("Tom";A2:B7)
Create a column with an array formula (enter it with Ctrl+Shift+Enter):
=VLOOKUP(MAX(IF($B$2:$B$6=B2, $A$2:A$6, 0)), $A$2:$C$6, 3, FALSE)
To make sure you did it right, click on the cell, and the formula should be shown encased in curly brackets ({}).
Note: This assumes that "Row" is in A1.
I have come up with a solution, but it requires that numbers in Data are concurrent, like so
Name Data
Joe 1
Tom 1
Eva 1
Adam 1
Tom 2
Tom 3
Eva 2
But thats okay, since that my data looks like that anyway. So if Name is used before then it must be the old highest +1 aka concurrent.
Name is A1 and Data is B1, and this formula goes into C2:
FLOOR(SQRT(2*SUMIF(A2:A7,A2,B2:B7)),1)