I'm trying to run 'hoogle data', and I get this as the output :
Downloading downloads/base.txt
# base.txt (for downloads/base.txt)
ERROR: cannot verify www.haskell.org's certificate, issued by '/C=BE/O=GlobalSign nv-sa/CN=GlobalSign Organization Validation CA - G2':
Issued certificate has expired.
To connect to www.haskell.org insecurely, use `--no-check-certificate'.
hoogle: Error when running Shake build system:
* default.hoo
* platform.hoo
* mtl.hoo
* base.txt
* downloads/base.txt.cache
* downloads/base.txt
Development.Shake.command, system command failed
Command: wget -nv http://www.haskell.org/hoogle/base.txt --output-document=downloads/base.txt
Exit code: 5
Stderr:
ERROR: cannot verify www.haskell.org's certificate, issued by '/C=BE/O=GlobalSign nv-sa/CN=GlobalSign Organization Validation CA - G2':
Issued certificate has expired.
To connect to www.haskell.org insecurely, use `--no-check-certificate'.
I'm not sure what to do, last time I ran hoogle data it just worked and generated everything, but I can't figure out how to get around this error.
To get around this problem, try creating a wrapper for wget:
I'll assume your installed wget is located at /usr/bin/wget
Save this file as wget somewhere in your $PATH and make sure it is executable:
#!/bin/sh
/usr/bin/wget --no-check-certificate "$#"
Now retry your hoogle command.
Related
I use the mcr.microsoft.com/mssql/server:2017 docker container to run a mssql server. I tried to change the collation like this:
echo "SQL_Latin1_General_CP1_CI_AS" | /opt/mssql/bin/mssql-conf set-collation
Unfortunately I get this error:
No passwd entry for user 'mssql'
How is it possible to fix this error?
I created a new user with useradd mssql, but now I get this error if I run the command:
sqlservr: Unable to open /var/opt/mssql/.system/instance_id: File: pal.cpp:566 [Status: 0xC0000022 Access Denied errno = 0xD(13) Permission denied]
/opt/mssql/bin/sqlservr: PAL initialization failed. Error: 101
It looks the latest mcr.microsoft.com/mssql/server fix such issue, if you insist on the old, next could be the procedure to fix all user/permission issue:
cake#cake:~/20211012$ docker run --rm -it mcr.microsoft.com/mssql/server:2017-latest /bin/bash
SQL Server 2019 will run as non-root by default.
This container is running as user root.
To learn more visit https://go.microsoft.com/fwlink/?linkid=2099216.
root#4fd0bdf1d21c:/# useradd mssql
root#4fd0bdf1d21c:/# mkdir -p /var/opt/mssql
root#4fd0bdf1d21c:/# chmod -R 777 /var/opt/mssql
root#4fd0bdf1d21c:/# echo "SQL_Latin1_General_CP1_CI_AS" | /opt/mssql/bin/mssql-conf set-collation
Enter the collation: Configuring SQL Server...
The SQL Server End-User License Agreement (EULA) must be accepted before SQL
Server can start. The license terms for this product can be downloaded from
http://go.microsoft.com/fwlink/?LinkId=746388.
You can accept the EULA by specifying the --accept-eula command line option,
setting the ACCEPT_EULA environment variable, or using the mssql-conf tool.
I have a task to install Oracle 11g on a centOS 8 using VM (i'm new to linux / oracle).
I downloaded the Oracle files and unzipped them, then I tried to ./runInstaller but I get an error and this is the full terminal with error:
login as: admin
admin#192.168.163.129's password:
Activate the web console with: systemctl enable --now cockpit.socket
Last login: Thu May 21 09:26:48 2020 from 192.168.163.1
[admin#oracledb ~]$ cd Downloads
[admin#oracledb Downloads]$ cd database
[admin#oracledb database]$ ls
doc linux.x64_11gR2_database_1of2 response runInstaller stage
install linux.x64_11gR2_database_2of2 rpm sshsetup welcome.html
[admin#oracledb database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 2027 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1759 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2020-05-21_09-43-58AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[admin#oracledb database]$
I am using putty and Xming but I still get this error.
Make sure your putty session is connecting with "x-11 port forwarding"
Be sure after you set this that you scroll back up to 'Session' and then 'save'
Last night I setup Pass Password Manager. I used gpg2, and followed this tutorial. I didn't implement git integration. Everything worked successfully. To view my password I had to enter my master key, exactly like how I want it. This morning I try to use pass. In my terminal I typed in
pass account/adobe/my#email.com
I get the following error:
gpg: decryption failed: No secret key
It didn't ask me to enter my master key. I tried restarting gpg-agent, I tried editing ~/.gnupg/gpg-agent.conf, but nothing is working.
This is how my ~/.gnupg/gpg-agent.conf looks like:
default-cache-ttl 28800
# 8 hours
pinentry-program /usr/bin/pinentry-curses
allow-loopback-pinentry
I should mention that I am using Linux Subsystem on Windows 10.
I put this in ~/.gnupg/gpg-agent.conf :
default-cache-ttl 3153600000
pinentry-program /usr/bin/pinentry-curses
allow-loopback-pinentry
After enter the following commands:
$ gpgconf --kill gpg-agent
$ gpg-connect-agent /bye
I'm trying to build Yocto for Raspberry Pi3, with console-image, and it gives me some build errors, most I have been able to resolve with
bitbake -c cleansstate libname
bitbake libname
However, now it got to libtalloc and it can't do_fetch the source files.
I went to the URL of the sources, and I was able to download the exact tar.gz archive it was trying to fetch. i.e. http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz
I even put it into /build/downloads folder.
But when I try to bitbake, it keeps giving me the same errors
Is there a way I can configure the build process to always fetch with http or wget, it seems that the these scripts are all broken, because it cant fetch a file that exists.
Thanks,
Here is the full printout:
WARNING: libtalloc-2.1.8-r0 do_fetch: Failed to fetch URL http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz, attempting MIRRORS if available
ERROR: libtalloc-2.1.8-r0 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-ATqIt180d4"; export SSH_AUTH_SOCK="/run/user/1000/keyring-Ubo22d/ssh"; export PATH="/home/dmitry/rpi/build/tmp/sysroots-uninative/x86_64-linux/usr/bin:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/usr/bin/python-native:/home/dmitry/poky-morty/scripts:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/usr/bin/arm-poky-linux-gnueabi:/home/dmitry/rpi/build/tmp/sysroots/raspberrypi2/usr/bin/crossscripts:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/usr/sbin:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/usr/bin:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/sbin:/home/dmitry/rpi/build/tmp/sysroots/x86_64-linux/bin:/home/dmitry/poky-morty/scripts:/home/dmitry/poky-morty/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"; export HOME="/home/dmitry"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/dmitry/rpi/build/downloads 'http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz' --progress=dot -v failed with exit code 4, output:
--2017-01-24 12:35:19-- http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz
Resolving samba.org (samba.org)... 144.76.82.156, 2a01:4f8:192:486::443:2
Connecting to samba.org (samba.org)|144.76.82.156|:80... connected.
HTTP request sent, awaiting response... Read error (Connection reset by peer) in headers.
Retrying.
--2017-01-24 12:35:20-- (try: 2) http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz
Connecting to samba.org (samba.org)|144.76.82.156|:80... connected.
HTTP request sent, awaiting response... Read error (Connection reset by peer) in headers.
Giving up.
ERROR: libtalloc-2.1.8-r0 do_fetch: Fetcher failure for URL: 'http://samba.org/ftp/talloc/talloc-2.1.8.tar.gz'. Unable to fetch URL from any source.
ERROR: libtalloc-2.1.8-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/dmitry/rpi/build/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/libtalloc/2.1.8-r0/temp/log.do_fetch.80102
ERROR: Task (/home/dmitry/poky-morty/meta-openembedded/meta-networking/recipes-support/libtalloc/libtalloc_2.1.8.bb:do_fetch) failed with exit code '1'
Is there a way I can configure the build process to always fetch with http or wget, it seems that the these scripts are all broken, because it cant fetch a file that exists.
The scripts already use both wget and http. They're also not really broken, the people maintaining the samba download servers just changed several things in the past week: I believe the libtalloc recipes main SRC_URI just needs to be changed to https://download.samba.org/pub/talloc/talloc-${PV}.tar.gz (the current canonical samba download server).
I'm sure meta-oe maintainer would appreciate a patch if this is indeed the case.
I applied the following patch to meta-openembedded and got it built. There are several samba links already broken.
http://pastebin.com/0uTnAY4g
Regards,
M.
I am trying to SFTP a Debian-7-Wheezy-V20140807 Instance on Google Compute Engine from Windows 7, 64 Bit Client.
Finally my problem got solved using this
Also in Windows I first installed Cygwin and then used set the Environment Variable CLOUDSDK_PYTHON to python instead of C:\python27\python.exe
and finally from cygwin ran this
curl https://sdk.cloud.google.com | bash
All the instructions below are symptoms. First i tried Filezilla, which errors out with message
Status: Waiting to retry...
Status: Connecting to 23.xx.xx.xx..
Response: fzSftp started
Command: open "Abdul#23.236.51.19" 22
Error: Disconnected: No supported authentication methods available (server sent: publickey)
Error: Could not connect to server
User :root
password :
<same as passphrase set up on running SSH key>
I have also tried gcloud compute copy-files
gcloud compute copy-files deccan4-clone:/etc/ssh/ssh_host_rsa_key.pub ssh_host_rsa_key.pub --zone=us-central1-b
ssh_host_rsa_key.pub: **Permission denied
ERROR**: (gcloud.compute.copy-files) exit code 1: /usr/bin/scp -i /home/Abdul/.ssh/google_compute_engine
sudo gcloud compute copy-files deccan4-clone:/etc/ssh/ssh_host_rsa_key.pub ssh_host_rsa_key.pub --zone=us-central1-b
WARNING: You do not have an SSH key for Google Compute Engine.
WARNING: ssh-keygen will be executed to generate a key.
This tool needs to create the directory /root/.ssh before being able
to generate SSH keys.
Do you want to continue (Y/n)? Y
Generating public/private rsa key pair.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/google_compute_engine.
Your public key has been saved in /root/.ssh/google_compute_engine.pub.
The key fingerprint is:
root#deccan4-clone
**ERROR: (gcloud.compute.copy-files) some requests did not succeed:
- Insufficient Permission**
I have also tried
Abdul#deccan4-clone:/home/a_rahman_synergywell_com$ gcloud compute copy-files de ccan4-clone:test.txt test.txt --zone=us-central1-b
scp: test.txt: No such file or directory
ERROR: (gcloud.compute.copy-files) exit code 1: /usr/bin/scp -i /home/Abdul/.ssh
/google_compute_engine -r Abdul#23.236.51.19:test.txt test.txt
Please let me know if I am missing some key setup.