I've got a file with a load of weird characters with in it that I need to get rid of.
Using ga on the character reveals it has the following encodings:
ﾣ> 65443, Hex ffa3, Octal 177643
But I can't seem to find it using :%s/\%xffa3//g. What am I doing wrong?
Look at :help \%x:
\%x2a Matches the character specified with up to two hexadecimal characters.
So Vim is actually matching the three characters <uf>a3. Since you have a four-digit hex number, you need to use \%u:
:%s/\%uffa3//g
Alternatives
You can also insert the character directly into the command line via :help i_CTRL-V_digit (i.e. <C-v>uffa3), but if you already have instances of that character in your buffer (and near your cursor!), I'd just yank that char with yl and insert it in the command-line via <C-r>".
Related
Specific question
Description
After recording the desired action to registrar o, I pasted the whole macro to my ~/.vimrc and assigned it as follows (directly pasting the mappings are not displayed properly)
Expected behavior
I would like to use this macro to get myself a new "comment line" that leads a new section of script, formatted such that the name of the section is centered. After populating the "section title", I would like to enter insert mode in a new line.
In the following screen-record, I have tested both #o and #p$ on the word "time". The second attempt with#p` worked as desired.
The problem (on Windows machine specifically)
As you see, the #o mapping gets me junk phrases which had been part of my definition for the macro. Does this have to do with the ^M operator? And, how can I fix the #o mapping, which uses * to populate the line?
The two mapping worked just fine on Linux system. (Don't know why, as I have recorded and pasted the macro-definition on Windows machine.) This also does not appear to be a problem on Mac with MacVim.
Generalized question
Is there a way to properly substitute the ^M operator (for <CR>, or "Enter"-key)?
Is there a way to properly substitute the ^[ operator (for <ESC>, or the "Escape"-key)?
Is there a systematic list of mappings from these weird representation of keystrokes, as recorded by the "recording" function through q.
Solution
Substitute the ^M marks in the macro-definition with \r. And, substitute ^[ to be \x1b, for the ESC key. The mappings are fixed as follows:
let #o = ":center\ri\r\x1bkV:s/ /\*/g\rJx50A\*\x1b80d|o"
let #p = ":center\ri\r\x1bkV:s/ /\"/g\rJx50A\"\x1b80d|o"
Complete list of key-codes/mappings? Approach 1: through hex code.
Thanks to Zbynek Vyskovsky, the picture is clear. For whatever key one may think of, Vim takes its ASCII value at the "face value". (The trick is to use a escape clause starting with \x, where x serves as the leader key/string/character connecting to the hex values.) Thus, the correspondence list (incomplete yet), goes as follows:
Enter --- \x0d --- \r
ESC --- \x1b --- \e
Solution native to Vim
By chance, :help expr-quote gives the following list of special characters. This shall serve as the definite answer to the original question in general form.
string *string* *String* *expr-string* *E114*
------
"string" string constant *expr-quote*
Note that double quotes are used.
A string constant accepts these special characters:
\... three-digit octal number (e.g., "\316")
\.. two-digit octal number (must be followed by non-digit)
\. one-digit octal number (must be followed by non-digit)
\x.. byte specified with two hex numbers (e.g., "\x1f")
\x. byte specified with one hex number (must be followed by non-hex char)
\X.. same as \x..
\X. same as \x.
\u.... character specified with up to 4 hex numbers, stored according to the
current value of 'encoding' (e.g., "\u02a4")
\U.... same as \u but allows up to 8 hex numbers.
\b backspace <BS>
\e escape <Esc>
\f formfeed <FF>
\n newline <NL>
\r return <CR>
\t tab <Tab>
\\ backslash
\" double quote
\<xxx> Special key named "xxx". e.g. "\<C-W>" for CTRL-W. This is for use
in mappings, the 0x80 byte is escaped.
To use the double quote character it must be escaped: "<M-\">".
Don't use <Char-xxxx> to get a utf-8 character, use \uxxxx as
mentioned above.
Note that "\xff" is stored as the byte 255, which may be invalid in some
encodings. Use "\u00ff" to store character 255 according to the current value
of 'encoding'.
Note that "\000" and "\x00" force the end of the string.
As you use assigning to register using vim expression language, it's definitely possible in platform independent way. The strings in vim expressions understand the standard escape sequences, therefore it's best to replace ^M with \r and Esc with \x1b:
let #o = ":center\riSomeInsertedString\x1b"
There is no list of of special characters to be translated as far as I know but you can simply take all control characters (ASCII below 32) and translate them to corresponding escape sequence "\xHexValue" where HexValue is the value of the character. Even \r (or ^M) can be translated to \x0d as its ASCII value is 13 (0x0d hex).
when I try to enter this Unicode character :☑(U+2611) in vim using the command like : ^Vu2611 (which means press ctrl+V then type u2611 in insert mode),Vim somehow breaks it into two characters : &(26) and ^Q(11).
There's no any problem when I tried to insert other kind of characters like □ (U+a1f5).
It seems like Vim stopped its parsing immediately after 26 (which represents character '&') has been read .
So,how can I insert this kind of Unicode characters in Vim (I have tried to paste it into Vim ,it doesn't work)?
Please Help!!!
In order to process Unicode characters, Vim must use an 'encoding' that is able to represent those characters. With a value of latin1, the mentioned character cannot be encoded (this 8-bit encoding only includes ASCII and several Western European characters, see here).
So, you need to
:set encoding=utf-8
With that, any newly created file will use that encoding, and you should be able to insert Unicode characters and write them (also with another Unicode file encoding, like :w ++enc=ucs-2le; but if you tried to persist as :w ++enc=latin1, you'd get a CONVERSION ERROR).
How do I enter Unicode characters like 𝓭 without copying it to the clipboard and pasting it?
Things I know:
The command ga on the character 𝓭 gives me hex:0001d4ed.
I can copy it on the clipboard and paste it via "+p.
I know how to enter Unicode values that have a 4 digit hex code:
<C-v>u for example <C-v>u03b1 gives the α character.
You can use <C-v>U, that is, an uppercase u, to input an 8 digit hex codepoint character.
More information here and here.
There is a Vim feature designed to simplify entering characters that
cannot be typed directly. It is called Digraphs (see :help digraphs).
To define a custom digraph for entering ‘𝓭’, use an Ex command similar
to the one below.
:dig dd 120045
where 120045 is the decimal representation of ‘𝓭’, as one can easily
confirm using the ga command.
Inserting a character using a digraph is simple:
Type Ctrl+K followed by the shortcut of that
digraph (dd for the above example).
There exists a Unicode plugin for Vim. According to the plugin description, this plugin has three main features:
Character/digraph completion using either the Unicode name or the codepoint.
Identify the character/digraph under the cursor.
Search for digraphs by name; transform two normal characters into their corresponding digraph.
I have a file that was converted from EBCDIC to ASCII. Where there used to be new lines there are now characters that show up as <85> (a symbol representing a single character, not the four characters it appears to be) and the whole file is on one line. I want to search for them and replace them all with new lines again, but I don't know how.
I tried putting the cursor over one and using * to search for the next occurrence, hoping that it might show up in my / search history. That didn't work, it just searched for the word that followed the <85> character.
I searched Google, but didn't see anything obvious.
My goal is to build a search and replace string like:
:%s/<85>/\n/g
Which currently just gives me:
E486: Pattern not found: <85>
I found "Find & Replace non-printable characters in vim" searching Google. It seems like you should be able to do:
:%s/\%x85/\r/gc
Omit the c to do the replacement without prompting, try with c first to make sure it is doing what you want it to do.
In Vim, typing :h \%x gives more details. In addition to \%x, you can use \%d, \%o, \%u and \%U for decimal, octal, up to four and up to eight hexadecimal characters.
For special character searching, win1252 for example, for the case of <80>,<90>,<9d>...
type:
/\%u80, \/%u90, /\%u9d ...
from the editor.
Similarly for octal, decimal, hex, type: /\%oYourCode, /\%dYourCode, /\%xYourCode.
try this: :%s/<85>/^M/g
note: press Ctrl-V together then M
or if you don't mind using another tool,
awk '{gsub("<85>","\n")}1' file
I have a file with some accents, and VIM displays them as "~V" characters. The "od -bc" command tells me the characters are charcode 226. I want to substitute them using VIM. But I can't get it to match the characters. How can I achieve that?
Optional question: how can I have VIM tell me which charset is used to interpret the current file?
You can use the following formats, from vim's manual on patterns and regular expressions:
ordinary atom
magic nomagic matches
\%d \%d match specified decimal character (eg \%d123
\%x \%x match specified hex character (eg \%x2a)
\%o \%o match specified octal character (eg \%o040)
\%u \%u match specified multibyte character (eg \%u20ac)
\%U \%U match specified large multibyte character (eg \%U12345678)
So you should be able to do something like this to replace char 226 with a space globally in the file:
:%s/\%d226/ /g
As for the latter, if you do:
:set encoding
You'll see output like:
encoding=latin1
One very simple way to deal with such "weird" characters is:
select the offending character(s) visually (v)
yank it to buffer
replace it with: :%s/<ctrl-r>"/something-else/g
where <ctrl-r> is pressing ctrl and letter r - together with " it will copy buffer to command line - effectively putting your offending characters inside of s/// operation.