Apologies if this has been posted already, for I cannot find an answer, even on the vim wiki.
Is there a way I can run multiple commands in vim command-line mode off of a single :g search?
For example,
:%g/foo/ s/bar/\=#a/g | exe "norm /cat\<enter>\"ayiw"
Which (for what I intend it to do) should, on every line matching foo, replace bar with the contents of register a, and then find the next iteration of cat (even if it is many lines ahead), and put the surrounding word into register a.
Instead, this specific syntax completes the subsitution command using the current contents of the initial a register, and then executes the normal mode command on a single line (after the substitution has been completed).
This example is not my specific use-case but shows one instance where this functionality is useful. I realize I could put it all into a single exe, i.e., %g/foo/exe "norm :s/bar/\\=#a/g\<enter>/cat\<enter>\"ayiw", but I would like to do it the first way, as I feel it is more flexible.
I would prefer to do this using vanilla vim, but if a plugin exists for this, that is an okay alternative. Does anybody know if there is syntax to do such a thing?
Okay a "little bit" dirty, but does this work for you?
:let list = split(execute('g/cat/p'), '\n') | g/foo/ s/bar/\=matchstr(remove(list, 0), '\s\d\+\s\zs.*')/g
It first reads all occurences of cat save them in a list.
Then replace the first bar with the first cat... and so on.
The dirty part ist the matchstr command. the g//p also returns a number for the result so the list looks like this:
1 cat
2 cat
3 cat
...
that's why we have to remove a bit from the front. I would love to hear if someone knows a clean solution for that (I am also interested in a clean vimscript solution, does not have to be a oneliner).
You can do this (at least for multiple :s commands applied to a single :g). Example:
" SHORT STORY TITLES to single word of CapitalizedWords within <h3>s
.,$g/^\L\+$/s/[^A-Z0-9 ]\+//ge|s/\u\+/\L&/ge|s/\<\l\+\>/\u&/ge|s/ \+//ge|s/.*/<h3>&<\/h3>/
I had a situation where I wanted to replace FOO with BAR through out a file. However, I only want to do it in certain places, say, between lines 68–104, 500–537, and 1044–1195. In practice, I dropped markers at the lines of interest (via ma, mb, mc, etc.) and ran the following:
:'a,'b s/FOO/BAR/g | 'c,'d s/FOO/BAR/g | 'e,'f s/FOO/BAR/g
I had to repeat this dozens of times with different search and replace terms s/CAT/DOG, etc., and it became a pain to have to rewrite the command line each time. I was lucky in that I had only three places that I needed to confine my search to (imagine how messy the command line would get if there were 30 or 40).
Short of writing a function, is there any neater way of doing this?
On a related note. I copied FOO to the s (search) register, and BAR to the r (replace) and tried running
:'a,'b s/\=#s/\=#r/ | 'c,'d s/\=#s/\=#r/ | 'e,'f s/\=#s/\=#r/
This would have saved me having to rewrite the command line each time, but, alas, it didn’t work. The replace bit \=#r was fine, but the \=#s bit in the search pattern gave me an error.
Any tips would be appreciated.
If you need to perform a set of line-wise operations (like substitutions) on a bunch of different ranges of lines, one trick you can use is to make those lines look different by first adding a prefix (that isn't shared by any of the other lines).
The way I usually do this is to indent the entire file with something like >G performed on the first line, and then use either :s/^ /X/ commands or block-visual to replace the leading spaces with X on the lines I want.
Then use :g in conjunction with :s. eg:
:%g/^X/s/FOO/BAR/g
:%g/^X/s/BAZ/QUUX/g
Finally, remove the temporary prefixes.
In order to get rid of the necessity to retype the same search
pattern, substitution string and flags, one can simply use the
:& command with the & flag:
:'a,'bs/pat/str/g | 'c,'d&& | 'e,'f&&
(See :help :& for details.)
Instead of using marker use this one :
:68,104s/FOO/BAR/g << substitue from line 68 to 104
This should make your job a little bit easier and clearer.
inspired by #Vdt's answer:
I am not sure but you could write all the substitutions down in a file and source that file i think.
substitutions.vim:
68,104s/FOO/BAR/g
168,204s/FOO/BAR/g
618,644s/FOO/BAR/g
681,1014s/FOO/BAR/g
.
.
.
68,104s/BAZ/BOOO/g
168,204s/BAZ/BOOO/g
and then :so substitutions.vim maybe you can also use this for multiple files of same structure. you can add an e to add an ignore error message, if it is not clear that the substitutions are found on the corresponding line blocks.
With q:, you can recall previous command lines and edit them as a normal Vim buffer, so you can quickly replace FOO and BAR with something else, then re-execute the line with Enter.
The s/\=#s/\=#r/ doesn't work; as you said, this only works in the replacement part. But for the pattern, you can use Ctrl + R Ctrl + R s to insert the contents of register s, instead of \=#s. Preferably use the default register, then it's a simple s//, but you probably know that already.
When performed over a closed fold, substitutions are limited to that fold.
fold each region
put the cursor on one closed fold
perform the substitution: :s/foo/bar<CR>
move to the next closed fold with zj or zk
use the command-line history: :<C-p><CR> or :<Up><CR> to perform the same substitution
repeat…
You can also add the c flag at the end of your substitution so that Vim asks you for a confirmation before actually performing it. This can be tedious if you have lot of matches.
Here's the simplest way to do it
:5,10s/old/new/g
5,10 : startlinenum,endlinenum
I have this dataset in a csv file
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504, 0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644, 0.00078635, 0.000730052, 0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669, 0.00230171, 0.00217917
As you can see, the numbers are formatted differently and misaligned. Is there a way in vim to quickly align the columns properly, so that the result is this
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504,0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644,0.00078635, 0.000730052,0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669,0.00230171, 0.00217917
That would be great to copy and paste sections with ctrl-v. Any hints?
If you're on some kind of UNIX (Linux, etc), you can cheat and filter it through the column(1) command.
:%!column -t
The above will parse on delimiters inside string literals which is wrong, so you will likely need pre-processing steps and specifying the delimiter for this file for example:
%!sed 's/","/\&/' | column -t -s '&'
Sometimes we want to align just two columns. In that case, we don't need any plugins and can use pure Vim functionality like this:
Choose a separator. In OP's post this is a comma, in my example this is =.
Add spaces before/after it. I use s/=/= ...spaces... / in visual selection for this.
Locate to the longest word and place cursor after it.
Remove all the extra whitespace using dw and vertical movement.
Example of this technique demonstrated below:
I don't find myself needing to align things often enough to install another plugin, so this was my preferred way of accomplishing it - especially that it doesn't require much thinking.
As sunny256 suggested, the column command is a great way of doing this on Unix/Linux machines, but if you want to do it in pure Vim (so that it can be used in Windows as well), the easiest way is to install the Align plugin and then do:
:%Align ,
:%s/\(\s\+\),\s/,\1/g
The first line aligns the entries on the commas and the second moves the comma so that it's flush with the preceding value. You may be able to use AlignCtrl to define a custom mapping that does the whole lot in one go, but I can never remember how to use it...
Edit
If you don't mind two spaces between entries and you want to do this in one command, you can also do:
:%Align ,\zs
This is a great answer using vim macros: https://stackoverflow.com/a/8363786/59384 - basically, you start recording a macro, format the first column, stop recording then repeat the macro for all remaining lines.
Copy/pasted from that answer:
qa0f:w100i <Esc>19|dwjq4#a
Note the single space after the 100i, and the <Esc> means "press escape"--don't type "<Esc>" literally.
Translation:
qa -- record macro in hotkey a
0 -- go to beginning of line
f: -- go to first : symbol
w -- go to next non-space character after the symbol
100i <Esc> -- insert 100 spaces
19| -- go to 19th column (value 19 figured out manually)
dw -- delete spaces until : symbol
j -- go to next line
q -- stop recording macro
4#a -- run the macro 4 times (for the remaining 4 lines)
We now also have the fabulous EasyAlign plugin, written by junegunn.
Demonstration GIF from its README:
Also, Tabularize is quite good http://vimcasts.org/episodes/aligning-text-with-tabular-vim/
You could use the csv.vim plugin.
:%ArrangeColumn
However, this will not do exactly what you have asked: it will right adjust the contents of cells, whereas you have your values aligned by the decimal point or by the first digit.
The plugin has many other useful commands for working with CSV files.
also if you have very long columns it can be handy to disable default wrapping
:set nowrap
:%!column -t
(note in debian you also have a further option for column -n which if you want to split multiple adjacent delimiters)
Here’s a pure Vim script answer, no plugins, no macros:
It might be most clear to start out with my problem’s solution as an example. I selected the lines of code I wanted to affect, then used the following command (recall that entering command mode from visual mode automatically prepends the “'<,'>”, so it acts on the visual range):
:'<,'>g``normal / "value<0d>D70|P`
Except I did NOT actually type “<0d>”. You can enter unprintable characters on the command line by pressing ctrl-v, then the key you want to type. “<0d>” is what is rendered on the command line after I typed ‘ctrl-v enter’. Here, it’s parsed by the “normal” command as the exit from “/” search mode. The cursor then jumps to “ value” in the current line.
Then we simply [D]elete the rest of the line, jump to column 70 (or whatever you need in your case), and [P]ut what we just deleted. This does mean we have to determine the width of the widest line, up to our search. If you haven’t put that information in your statusline, you can see the column of the cursor by entering the normal mode command ‘g ctrl-g’. Also note that jumping to a column that doesn’t exist requires the setting 'virtualedit'!
I left the search term for the :g(lobal) command empty, since we used a visual block and wanted to affect every line, but you can leave off using a visual selection (and the “'<,'>”) and put a search term there instead. Or combine a visual selection and a search term to narrow things more finely/easily.
Here’s something I learned recently: if you mess up on a complex command mode command, undo with ‘u’ (if it affected the buffer), then press “q:” to enter a special command history buffer that acts much like a conventional buffer. Edit any line and press enter, and the changed command is entered as a new command. Indispensable if you don’t want to have to stress over formulating everything perfectly the first time.
I just wrote tablign for this purpose. Install with
pip3 install tablign --user
Then simply mark the table in vim and do
:'<,'>:!tablign
Pretty old question, but I've recently availed myself of an excellent vim plugin that enables table formatting either on the fly or after-the-fact (as your use case requires):
https://github.com/dhruvasagar/vim-table-mode
I have this in my .vimrc.
command! CSV set nowrap | %s/,/,|/g | %!column -n -t -s "|"
This aligns the columns while keeping the comma, which may be needed later for correct reading. For example, with Python Pandas read_csv(..., skipinitialspace=True), thanks Pandas guys for this smart option, otherwise in vim %s/,\s\+/,/g. It may be easier if your column has the option --output-separator I guess, my doesn't and I'm not sure why (my man page for column says 2004, on ubuntu 18.04, not sure ubuntu will get a new version). Anyway, this works for me, and comment if you have any suggestions.
I made a cli tool written in Perl.
You can find it here: https://github.com/bas080/colcise