When installing things in Linux I often see stdout change after printing eg. there might be a counter showing installation progress that starts at 1% and goes up to 100%. How is this done? When I write C programs and I print something using printf, I can't change it afterwards - if I type 1%, it stays that way. How is it done? Is there a different function I have to use?
\r brings you back to the beginning of the line without issuing the \n to go to the next line. Use this to overwrite text on the screen to build progress bars, etc.
See:
How to add a progress bar to a shell script?
Related
I want to know if anyone does know a way to dump or copy the whole lot of viewable messages in a xterm window on linux. The very important thing is I don't want to know how to send a command out and kapture its output for stream 1 and 2 as well as the input, as this is well known to me.
I may explain for what this is needed. You do something and expect not any complications but than you got pages of msg's als err msg or normal output. To be able to see later after it you should be able to get them in a file and as long as you are able to scroll that all back and forther with your mouse it is sure the data is there some where. But the time may be not to scroll and screenshot and scroll ....
I would be glad to help me out in such cases and it would be fine to have the full view including all your own typing and all the msg's in same order as you watch it when you scroll it back.
I don't really know where this is stored and how you could get that saved. I know that I could dump the whole lot of Memory and search it for a part of the xterm window, but that is a bit over the top I think.
There is a control sequence, which I had forgotten. This question reminded me. In XTerm Control Sequences, it is noted "print all pages":
CSI ? Pm i
Media Copy (MC, DEC-specific).
Ps = 1 -> Print line containing cursor.
Ps = 4 -> Turn off autoprint mode.
Ps = 5 -> Turn on autoprint mode.
Ps = 1 0 -> Print composed display, ignores DECPEX.
Ps = 1 1 -> Print all pages.
That dates from 1999 (patch #119), so you likely have it in your xterm. You could do this in a shell command like this:
printf '\033[?11i'
A comment mentions the page Hidden gems of xterm, which uses the corresponding action print-everything (something that can be executed via the translations resource). It is in the manual page, of course. The same comment points to Extra characters in XTerm printerCommand output, which mentions the resource printAttributes. By default, the control sequences for the printer tell xterm to send extra control characters (to reconstruct video attributes). The resource can be modified (set to 0) to suppress that. That is even older (patch #74).
Without that — Conceivably one could construct an application which used the X SendEvent protocol to construct a series of events which would be interpreted as xterm actions to scroll back, select text and copy it chunk-by-chunk via the clipboard. You could even write it in Perl (there is a module for X protocol). But seriously, no.
If you want to capture text which was written to xterm, you can do this by preparing before the text is needed by different methods (see manual):
turn on the xterm logging feature (not that user-friendly because it generates the filename). This can be enabled using the "Log to File (logging)" menu entry.
use the printer control sequences to write lines as they are written (again, not that friendly, though there is a menu entry to turn it on and off, "Redirect to Printer (print-redir)")
use script to capture all output to the terminal. I use this, because it works with any terminal on any POSIX-like system (even Cygwin).
Each of these methods produces a file containing escape/control sequences, which requires filtering out. The hypothetical program using SendEvent could in principle eliminate that.
I have a Tcl/Tk expect script, and log information is logged to external log file.
I can execute it on Linux server successfully without any wrong, and the log file do not have any weird ^H. But when the script is called by Jenkins job, run on the same Linux server. the log file will have a lot of ^H, And the expect will timeout.
What the possible reason could be?
The ^H is actually the backspace character, U+000008, and it is used in terminals (and terminal emulators) to move the current character insertion position one place to the left. This is used in turn to simulate various kinds of effects, such as making a character bold (by double-striking) or giving it an underline (by putting a _ on the same cell). Think like it's going to a traditional teletype, which prints things into the same position twice. It's definitely a hang-over from
the old days.
It seems that Jenkins (or maybe whatever it is calling, quite possibly maven though definitely not necessarily!) is using that device to back up over what it has written so it can write a new value there instead, probably for something like a simple download progress meter. Things that are writing to what they think is a terminal sometimes do this. You'll just have to cope. A \b in your Expect regular expressions will match it, though it is possibly unwise to do so, as whatever is being overwritten is transient info. If the characters are being written to a file, the col program (part of the nroff/groff suite) can be used to strip them; that might be easier.
Be aware that there are other ways that software can achieve the same effect, such as writing just a carriage return (which puts the cursor back at the start of the current line).
I don't want to write C code for this,
But I want my script to behave like 'watch': display output on a clean console, and eventually return to the original output that was displayed.
I'm not using watch because it messes with my output and lack functions I want to add.
Regular 'clear' will fill up my console with pages and pages of the same output and I want to avoid that.
Any suggestions?
Terminal curses software such as ncurses should work as well as making 'q' to quit like less fairly simple
I can scroll trough bash output using shift+pgup/pgdown.
But lets say, some command outputted lot of text, I have to pageup few times to go to beginning of output of this command.
Can I just simply do this by some shortcut? Something that simply allows me to scroll between previous commands (not history!), seeing their output.
You could try piping the output into less:
someCommand | less
less will allow you to search and scroll through the output text pretty easily.
once in less you can just type % to jump back to the top of the page. Essentially that means jump to 0% of the page. There are also a bunch of extra commands on the page I linked to above.
Another option is to use screen and use backward search (beware: read the Overview first, especially the part about the C-a prefix) to e.g. search for some specific characters in your prompt (like your username).
The scroll back history in Unix shells is a shell specific functionality, meaning that it is up to the specific shell (xterm, rxvt, text console, etc) to handle it. The functionality you request would require the shell to identify the individual program runs, to know where to scroll to. Scanning text is not technically hard per se, but as prompts and command display can differ due to user settings it can be hard to make it work generally good. Some communication between the shell and the terminal could make it better.
There sure are some nice fancy terminal programs doing things like this, to for example show syntax help when writing commands, but for your case I agree with previous answer, that piping commands to less is a good way to isolate the output. It might be a bit cumbersome first, as it requires you to think about it first, and not just go back in history, but if you learn the shell better and learn to use the command history it will probably work fine. I recommend you to, if you haven't already. What I mean is ctrl-r etc. More described for example here:
http://www.catonmat.net/blog/the-definitive-guide-to-bash-command-line-history/
I used some sql command to join two tables and the result was two terminal line long for each row of resulted table.
I dont want so ... i mean is there any way to get scroll bar at the bottom so that a row can be fit into a terminal line. and it will be a well structured and readable output
I hope you get my question.
There is no way on a standard terminal. You could use e.g. less as your pager for you sql-client.
I propose to pipe the output into the command less -S:
$ mysql-command-doing-the-SELECT | less -S
(To achieve this in the interactive mysql console, you can type pager less -S.)
Then all lines are displayed without being wrapped, and you can scroll sideways using the arrow keys. You can also use the command less (without the option -S) and then interactively type - S to achieve the non-wrapping. (Type again to toggle.)
If you need a real scroll bar, I propose to pipe the output into a real file and then use a more sophisticated program like gedit (which can be switched to a non-wrapping display) to display it with a decent scroll bar.
Another solution: copy the data from the terminal and paste it into your favorite editor. The copied text will not have any line breaks "\n".
(Offtopic: on a linux system you can just select the text with a mouse and mouse-middle-click in your editor. This will copy the text without filling out the main copy-paste buffer.)