Suppose I have code like:
x = 0
y = 1
z = 2
my_list = [x, y, z]
for item in my_list:
print("handling object ", name(item)) # <--- what would go instead of `name`?
How can I get the name of each object in Python? That is to say: what could I write instead of name in this code, so that the loop will show handling object x and then handling object y and handling object z?
In my actual code, I have a dict of functions that I will call later after looking them up with user input:
def fun1():
pass
def fun2():
pass
def fun3():
pass
fun_dict = {'fun1': fun1,
'fun2': fun2,
'fun3': fun3}
# suppose that we get the name 'fun3' from the user
fun_dict['fun3']()
How can I create fun_dict automatically, without writing the names of the functions twice? I would like to be able to write something like
fun_list = [fun1, fun2, fun3] # and I'll add more as the need arises
fun_dict = {}
for t in fun_list:
fun_dict[name(t)] = t
to avoid duplicating the names.
Objects do not necessarily have names in Python, so you can't get the name.
When you create a variable, like the x, y, z above then those names just act as "pointers" or "references" to the objects. The object itself does not know what name(s) you are using for it, and you can not easily (if at all) get the names of all references to that object.
However, it's not unusual for objects to have a __name__ attribute. Functions do have a __name__ (unless they are lambdas), so we can build fun_dict by doing e.g.
fun_dict = {t.__name__: t for t in fun_list)
That's not really possible, as there could be multiple variables that have the same value, or a value might have no variable, or a value might have the same value as a variable only by chance.
If you really want to do that, you can use
def variable_for_value(value):
for n,v in globals().items():
if v == value:
return n
return None
However, it would be better if you would iterate over names in the first place:
my_list = ["x", "y", "z"] # x, y, z have been previously defined
for name in my_list:
print "handling variable ", name
bla = globals()[name]
# do something to bla
This one-liner works, for all types of objects, as long as they are in globals() dict, which they should be:
def name_of_global_obj(xx):
return [objname for objname, oid in globals().items()
if id(oid)==id(xx)][0]
or, equivalently:
def name_of_global_obj(xx):
for objname, oid in globals().items():
if oid is xx:
return objname
As others have mentioned, this is a really tricky question. Solutions to this are not "one size fits all", not even remotely. The difficulty (or ease) is really going to depend on your situation.
I have come to this problem on several occasions, but most recently while creating a debugging function. I wanted the function to take some unknown objects as arguments and print their declared names and contents. Getting the contents is easy of course, but the declared name is another story.
What follows is some of what I have come up with.
Return function name
Determining the name of a function is really easy as it has the __name__ attribute containing the function's declared name.
name_of_function = lambda x : x.__name__
def name_of_function(arg):
try:
return arg.__name__
except AttributeError:
pass`
Just as an example, if you create the function def test_function(): pass, then copy_function = test_function, then name_of_function(copy_function), it will return test_function.
Return first matching object name
Check whether the object has a __name__ attribute and return it if so (declared functions only). Note that you may remove this test as the name will still be in globals().
Compare the value of arg with the values of items in globals() and return the name of the first match. Note that I am filtering out names starting with '_'.
The result will consist of the name of the first matching object otherwise None.
def name_of_object(arg):
# check __name__ attribute (functions)
try:
return arg.__name__
except AttributeError:
pass
for name, value in globals().items():
if value is arg and not name.startswith('_'):
return name
Return all matching object names
Compare the value of arg with the values of items in globals() and store names in a list. Note that I am filtering out names starting with '_'.
The result will consist of a list (for multiple matches), a string (for a single match), otherwise None. Of course you should adjust this behavior as needed.
def names_of_object(arg):
results = [n for n, v in globals().items() if v is arg and not n.startswith('_')]
return results[0] if len(results) is 1 else results if results else None
If you are looking to get the names of functions or lambdas or other function-like objects that are defined in the interpreter, you can use dill.source.getname from dill. It pretty much looks for the __name__ method, but in certain cases it knows other magic for how to find the name... or a name for the object. I don't want to get into an argument about finding the one true name for a python object, whatever that means.
>>> from dill.source import getname
>>>
>>> def add(x,y):
... return x+y
...
>>> squared = lambda x:x**2
>>>
>>> print getname(add)
'add'
>>> print getname(squared)
'squared'
>>>
>>> class Foo(object):
... def bar(self, x):
... return x*x+x
...
>>> f = Foo()
>>>
>>> print getname(f.bar)
'bar'
>>>
>>> woohoo = squared
>>> plus = add
>>> getname(woohoo)
'squared'
>>> getname(plus)
'add'
Use a reverse dict.
fun_dict = {'fun1': fun1,
'fun2': fun2,
'fun3': fun3}
r_dict = dict(zip(fun_dict.values(), fun_dict.keys()))
The reverse dict will map each function reference to the exact name you gave it in fun_dict, which may or may not be the name you used when you defined the function. And, this technique generalizes to other objects, including integers.
For extra fun and insanity, you can store the forward and reverse values in the same dict. I wouldn't do that if you were mapping strings to strings, but if you are doing something like function references and strings, it's not too crazy.
Note that while, as noted, objects in general do not and cannot know what variables are bound to them, functions defined with def do have names in the __name__ attribute (the name used in def). Also if the functions are defined in the same module (as in your example) then globals() will contain a superset of the dictionary you want.
def fun1:
pass
def fun2:
pass
def fun3:
pass
fun_dict = {}
for f in [fun1, fun2, fun3]:
fun_dict[f.__name__] = f
Here's another way to think about it. Suppose there were a name() function that returned the name of its argument. Given the following code:
def f(a):
return a
b = "x"
c = b
d = f(c)
e = [f(b), f(c), f(d)]
What should name(e[2]) return, and why?
And the reason I want to have the name of the function is because I want to create fun_dict without writing the names of the functions twice, since that seems like a good way to create bugs.
For this purpose you have a wonderful getattr function, that allows you to get an object by known name. So you could do for example:
funcs.py:
def func1(): pass
def func2(): pass
main.py:
import funcs
option = command_line_option()
getattr(funcs, option)()
I know This is late answer.
To get func name , you can use func.__name__
To get the name of any python object that has no name or __name__ method. You can iterate over its module members.
Ex:.
# package.module1.py
obj = MyClass()
# package.module2.py
import importlib
def get_obj_name(obj):
mod = Obj.__module__ # This is necessary to
module = module = importlib.import_module(mod)
for name, o in module.__dict__.items():
if o == obj:
return name
Performance note: don't use it in large modules.
Variable names can be found in the globals() and locals() dicts. But they won't give you what you're looking for above. "bla" will contain the value of each item of my_list, not the variable.
Generally when you are wanting to do something like this, you create a class to hold all of these functions and name them with some clear prefix cmd_ or the like. You then take the string from the command, and try to get that attribute from the class with the cmd_ prefixed to it. Now you only need to add a new function/method to the class, and it's available to your callers. And you can use the doc strings for automatically creating the help text.
As described in other answers, you may be able to do the same approach with globals() and regular functions in your module to more closely match what you asked for.
Something like this:
class Tasks:
def cmd_doit(self):
# do it here
func_name = parse_commandline()
try:
func = getattr('cmd_' + func_name, Tasks())
except AttributeError:
# bad command: exit or whatever
func()
I ran into this page while wondering the same question.
As others have noted, it's simple enough to just grab the __name__ attribute from a function in order to determine the name of the function. It's marginally trickier with objects that don't have a sane way to determine __name__, i.e. base/primitive objects like basestring instances, ints, longs, etc.
Long story short, you could probably use the inspect module to make an educated guess about which one it is, but you would have to probably know what frame you're working in/traverse down the stack to find the right one. But I'd hate to imagine how much fun this would be trying to deal with eval/exec'ed code.
% python2 whats_my_name_again.py
needle => ''b''
['a', 'b']
[]
needle => '<function foo at 0x289d08ec>'
['c']
['foo']
needle => '<function bar at 0x289d0bfc>'
['f', 'bar']
[]
needle => '<__main__.a_class instance at 0x289d3aac>'
['e', 'd']
[]
needle => '<function bar at 0x289d0bfc>'
['f', 'bar']
[]
%
whats_my_name_again.py:
#!/usr/bin/env python
import inspect
class a_class:
def __init__(self):
pass
def foo():
def bar():
pass
a = 'b'
b = 'b'
c = foo
d = a_class()
e = d
f = bar
#print('globals', inspect.stack()[0][0].f_globals)
#print('locals', inspect.stack()[0][0].f_locals)
assert(inspect.stack()[0][0].f_globals == globals())
assert(inspect.stack()[0][0].f_locals == locals())
in_a_haystack = lambda: value == needle and key != 'needle'
for needle in (a, foo, bar, d, f, ):
print("needle => '%r'" % (needle, ))
print([key for key, value in locals().iteritems() if in_a_haystack()])
print([key for key, value in globals().iteritems() if in_a_haystack()])
foo()
You define a class and add the Unicode private function insert the class like
class example:
def __init__(self, name):
self.name = name
def __unicode__(self):
return self.name
Of course you have to add extra variable self.name which is the name of the object.
Here is my answer, I am also using globals().items()
def get_name_of_obj(obj, except_word = ""):
for name, item in globals().items():
if item == obj and name != except_word:
return name
I added except_word because I want to filter off some word used in for loop.
If you didn't add it, the keyword in for loop may confuse this function, sometimes the keyword like "each_item" in the following case may show in the function's result, depends on what you have done to your loop.
eg.
for each_item in [objA, objB, objC]:
get_name_of_obj(obj, "each_item")
eg.
>>> objA = [1, 2, 3]
>>> objB = ('a', {'b':'thi is B'}, 'c')
>>> for each_item in [objA, objB]:
... get_name_of_obj(each_item)
...
'objA'
'objB'
>>>
>>>
>>> for each_item in [objA, objB]:
... get_name_of_obj(each_item)
...
'objA'
'objB'
>>>
>>>
>>> objC = [{'a1':'a2'}]
>>>
>>> for item in [objA, objB, objC]:
... get_name_of_obj(item)
...
'objA'
'item' <<<<<<<<<< --------- this is no good
'item'
>>> for item in [objA, objB]:
... get_name_of_obj(item)
...
'objA'
'item' <<<<<<<<--------this is no good
>>>
>>> for item in [objA, objB, objC]:
... get_name_of_obj(item, "item")
...
'objA'
'objB' <<<<<<<<<<--------- now it's ok
'objC'
>>>
Hope this can help.
Based on what it looks like you're trying to do you could use this approach.
In your case, your functions would all live in the module foo. Then you could:
import foo
func_name = parse_commandline()
method_to_call = getattr(foo, func_name)
result = method_to_call()
Or more succinctly:
import foo
result = getattr(foo, parse_commandline())()
Python has names which are mapped to objects in a hashmap called a namespace. At any instant in time, a name always refers to exactly one object, but a single object can be referred to by any arbitrary number of names. Given a name, it is very efficient for the hashmap to look up the single object which that name refers to. However given an object, which as mentioned can be referred to by multiple names, there is no efficient way to look up the names which refer to it. What you have to do is iterate through all the names in the namespace and check each one individually and see if it maps to your given object. This can easily be done with a list comprehension:
[k for k,v in locals().items() if v is myobj]
This will evaluate to a list of strings containing the names of all local "variables" which are currently mapped to the object myobj.
>>> a = 1
>>> this_is_also_a = a
>>> this_is_a = a
>>> b = "ligma"
>>> c = [2,3, 534]
>>> [k for k,v in locals().items() if v is a]
['a', 'this_is_also_a', 'this_is_a']
Of course locals() can be substituted with any dict that you want to search for names that point to a given object. Obviously this search can be slow for very large namespaces because they must be traversed in their entirety.
Hi there is one way to get the variable name that stores an instance of a class
is to use
locals()
function, it returns a dictionary that contains the variable name as a string and its value
I have the following list:
appList = [DevOpsApplication, 01.01.01]
I would like to create a map using collectEntries. I know that it refers to the current element of an iteration (shortcut for { it -> it }). Therefore, I tried to use the index:
def appMap = appList.collectEntries { [(it[0]):it[1]] }
However, this gives me:
[D:e, 0:1]
But I want [DevOpsApplication: 01.01.01]. Is there a way to do this?
Additionally, In future I would like this to expand to more than 2 elements (e.g. [DevOpsApplication, 01.01.01, AnotherDevOpsApplication, 02.02.02]) with the desired output of [DevOpsApplication: 01.01.01, AnotherDevOpsApplication: 02.02.02].
How will this be possible?
A very short version to do this would be:
def appList = ["DevOpsApplication", "01.01.01"]
def appMap = [appList].collectEntries() // XXX
assert appMap == [DevOpsApplication: "01.01.01"]
How does it work: the function collectEntries takes, is expected to return a map or a two element list. Your appList is already that. So put that in another list, call collectEntries on it. When no function is given to collectEntries it uses the identity function.
Bonus: what if appList has much more elements? You can use collate to build the tuples.
def appList = ["DevOpsApplication", "01.01.01", "Some", "More"]
def appMap = appList.collate(2).collectEntries() // XXX
assert appMap == [DevOpsApplication: "01.01.01", Some: "More"]
I also found another method. Groovy can convert the values of an Object array and convert them into a map with the toSpreadMap(). However, the array must have an even number of elements.
def appList = ['DevOpsApplication', '01.01.01']
def appMap = appList.toSpreadMap()
You're iterating element-by-element and (because your elements are String-typed) mapping 0 substrings to 1 substrings.
You can use this to skip one element in each iteration and map each element at even indices to the one after it:
def appList = ['DevOpsApplication', '01.01.01']
def appMap = (0..(appList.size()-1)).findAll{0 == it%2}
.collectEntries{[(appList[it]): appList[it+1]]}
That returns [DevOpsApplication:01.01.01] as expected.
This question could be senseless, it's just interesting for me is it possible ot not.
In my code I had a lot of similar checks and calls like:
if self.command == self.CMD_HELP:
help(self.id)
if self.command == self.CMD_FIND:
find(self.id)
...
I found that in theory it could be done as:
self.COMMANDS = {
'help': help,
'find': find,
...
}
And execution:
self.COMMANDS[command](self.id)
It's fine if I will call one function.
But what if I need to call something like first(second(arg)) is it possible?
Update:
Sorry, my initial description appeared not very clear.
All this stuff is about the refactoring of the current implementation:
if command == MessageSettings.MSG_GLOBAL_HELP:
notify_help(guid)
if command == MessageSettings.MSG_GLOBAL_DISCORD:
sv_async.submit_fast(sv_discord.notify_discord_help(guid))
if command == MessageSettings.MSG_GLOBAL_FIND:
sv_async.submit_fast(sv_discord.notify_found_discord_users(guid, param))
... a lot of other 'ifs'
In the same time I have to support the list of the values to make the comparison:
class MessageSettings:
MSG_GLOBAL_HELP = 'help'
MSG_GLOBAL_DISCORD = 'discord'
MSG_GLOBAL_FIND = 'find'
...
MSG_VALUES = [
MSG_GLOBAL_HELP,
MSG_GLOBAL_DISCORD,
MSG_GLOBAL_FIND,
...
]
In this case if I add new option I will have to modify 3 places: new field in the class, add it into the array, add comparison and execution of if == value -> function.
Since functions can receive different amount of parameters I can rewrite all functions to take an array [] as a singe param.
I thought of using a dictionary with a "key -> function".
My question was that I did not understand if that was possible to apply this approach in cases if multiple function calls.
Also I don't know and I am not sure if such approach worth it.
ps: in my 3rd case there are:
def submit_fast(task):
future = asyncio.run_coroutine_threadsafe(task, loop_fast)
def notify_found_discord_users(will_replace_with_array):
anything
You could use lamda as in :
def help (n):
return "help " + n + " "
def find (n):
return "find " + n + " "
COMMANDS = {
'help': help,
'find': find,
'other' : (lambda x: help(x) + find(x))
}
print (COMMANDS['other']("Joe"))
If you mean something like this,
def lower(x):
return x.lower()
def upper(x):
return x.upper()
a = "a string"
b = upper(lower(upper(a)))
Of course.
the output of an inner function will be chained as the input of its outer function (as long as their parameters match).
It's the fundamental of any programming language.
For example, the groovy File class has a nice iterator that will filter out just directories and not files:
void eachDir(Closure closure)
When I use eachDir, I have to use the verbose method of creating the collection first and appending to it:
def collection = []
dir1.eachDir { dir ->
collection << dir
}
Any way to get it back to the nice compact collect syntax?
I don't know of any "idiomatic" way of doing this, nice riddle! =D
You can try passing the eachDir, or any similar function, to a function that will collect its iterations:
def collectIterations(fn) {
def col = []
fn {
col << it
}
col
}
And now you can use it as:
def dir = new File('/path/to/some/dir')
def subDirs = collectIterations(dir.&eachDir)
def file = new File('/path/to/some/file')
def lines = collectIterations(file.&eachLine)
(that last example is equivalent to file.readLines())
And only for bonus points, you may define this function as a method in the Closure class:
Closure.metaClass.collectIterations = {->
def col = []
delegate.call {
col << it
}
col
}
def dir = new File('/path/to/some/dir')
def subDirs = dir.&eachDir.collectIterations()
def file = new File('/path/to/some/file')
def lines = file.&eachLine.collectIterations()
Update: On the other hand, you might also do:
def col = []
someDir.eachDir col.&add
Which I think is quite less convoluted, but it's not leveraging the collect method as you requested :)
Not for the specific example that you're talking about. File.eachDir is sort of a weird implementation IMO. It would have been nice if they implemented iterator() on File so that you could use the normal iterator methods on them rather than the custom built ones that just execute a closure.
The easiest way to get a clean one liner that does what you're looking for is to use listFiles instead combined with findAll:
dir1.listFiles().findAll { it.directory }
If you look at the implementation of eachDir, you'll see that it's doing this (and a whole lot more that you don't care about for this instance) under the covers.
For many similar situations, inject is the method that you'd be looking for to have a starting value that you change as you iterate through a collection:
def sum = [1, 2, 3, 4, 5].inject(0) { total, elem -> total + elem }
assert 15 == sum