I get the following error when I try to install Mininet:
Installing Mininet core
~/mininet ~
cc -DVERSION=\"PYTHONPATH=. bin/mn --version\" mnexec.c -o mnexec
mnexec.c: In function ‘setns’:
mnexec.c:49: error: ‘__NR_setns’ undeclared (first use in this function)
I searched online and found that I could fix the problem by defining the missing system call number appropriately for my 32- or 64-bit kernel.
How do I define the missing system call number for the 32-bit kernel?
I do not know what Mininet is, but I believe your problem may be due to lack of a necessary header file. The error:
mnexec.c: In function ‘setns’: `mnexec.c:49: error: ‘__NR_setns’ undeclared (first use in this function)
Indicates that __NR_setns is not declared in what you are attempting to compile. A little digging shows the possible headers in which it is referenced in Linux. See Linux Cross Reference. A short list of possibilities is:
/usr/include/asm/unistd_32.h
/usr/include/asm/unistd_64.h
/usr/include/bits/syscall.h
/usr/include/valgrind/vki/vki-scnums-x86-linux.h
/usr/include/valgrind/vki/vki-scnums-amd64-linux.h
There are others, but those look the most relevant.
I am getting this single error when I am linking my project,
COMMUNICATION.obj : fatal error LNK1179: invalid or corrupt file:
duplicate COMDAT '_IID_IXMLDOMImplementation'
What is the source of the problem?
This is a tricky one.
The issue is that the symbol(s)-generated is too-long, and an ambiguity exists:
//...
void MyVeryLongFunctionNameUnique_0(void);
void MyVeryLongFunctionNameUnique_1(void);
// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
// (example max-symbol-length-seen-by-linker)
In this case, the linker "sees" these two functions as the "same", because the part that makes them "unique" is longer-than-the-max-symbol length.
This can happen in at least three cases:
Your symbol names are "too-long" to be considered unique to the linker, but may have been fine for the compiler (such as when you expand-out from many nested templates)
You did some "trickery" that is invalid C++, and it passed the compiler, but you now have an invalid *.obj, and it chokes the linker.
You specified duplicate "unnamed" classes/structs, and the linker cannot resolve them.
===[UPDATE]===, It's not your fault, it's an internal problem with the compiler and/or linker (see below for possible work-arounds).
Depending on the issue (above), you can "increase" your symbol-length (by limiting-your-decrease-of-symbol-length), or fix your code to make it valid (unambiguous) C++.
This error is (minimally) described by Microsoft at:
http://msdn.microsoft.com/en-us/library/cddbs9aw(v=vs.90).aspx
NOTE: This max-symbol-length can be set with the /H option, see: http://msdn.microsoft.com/en-us/library/bc2y4ddf(v=vs.90).aspx
RECOMMEND: Check to see if /H is used on your command-line. If it is, delete it (do not specify max-symbol-length, it will default to 2,047, the /H can only DECREASE this length, not increase it).
However, you probably triggered it through the /Gy option (function-level-linking), which was probably implied through one of /Z7, /Zi, or /ZI: http://msdn.microsoft.com/en-us/library/958x11bc(v=vs.90).aspx
One MSDN thread that talks about this issue is:
http://social.msdn.microsoft.com/Forums/en-US/vcmfcatl/thread/57e3207e-9fab-4b83-b264-79a8a717a8a7
This thread suggests that it's possible to trigger this issue with "invalid-C++-code-that-compiles" (you get your *.obj), but that invalid-*.obj chokes the linker (this example attempts to use main as both a function and as a template):
http://www.cplusplus.com/forum/lounge/46361/
===[UPDATE]===
I should have said this before, because I suspected, but I now have more information: It might not be your fault, there seems to be an issue in the compiler and/or linker that triggers this error. This is despite the fact that the only common denominator in all your failed relationships is you.
Recall that the "above-list" applies (it MIGHT be your fault). However, in the case where, "it's not your fault", here's the current-running-list (I'm confident this list is NOT complete).
There is an internal error/corruption in your *.ilk file (intermediate-link-file). Delete it and rebuild.
You have /INCREMENTAL turned on for linking, but somehow that incremental-linking is not working for your project, so you should turn it off and rebuild (Project-Properties=>Configuration Properties=>Linker=>General=>Enable Incremental Linking [set to "No" (/INCREMENTAL:NO)]
There's a problem with "Optimization" for "COMDAT Folding" in your use. Your can "Remove Redundant COMDATs" by going to Project Proerties=>Configuration Properties=>Linker=>Optimization=>Enable COMDAT Folding, set to "Remove Redundant COMDATs (/OPT:ICF)
Here's an interesting thread from a guy who sometimes can link, and sometimes not, by commenting in/out a couple lines of code. It's not the code that is the problem -- he just cannot link consistently, and it looks like the compiler and/or linker has an internal problem under some obscure use case:
http://www.pcreview.co.uk/forums/fatal-error-lnk1179-t1430593.html
Other observations from a non-trivial web search:
this problem appears to be non-rare
it seems to be related to some form of template<> use
others seem to see this problem with "Release" build when it did not have this problem with "Debug" build (but it is also seen on the "Debug" build in many cases)
if the link "fails" on one machine, it may "succeed" on another build machine (not sure why, a "clean-build" appears to have no effect)
if you comment in/out a particularly significant couple-lines-of-code, and finish your build, and keep doing this until all the code is un-commented again, your link may succeed (this appears to be repeatable)
if you get this error with MSVC2008, and you port your code to MSVC2010, you will still get this error
===[PETITION TO THE GOOD PEOPLE OF THE WORLD]===
If you have other observations on this error, please list them below (as other answers, or as comments below this answer). I have a similar problem, and it's not my fault, and none of these work-arounds worked for me (although they did appear to work for others in their projects in some cases).
I'm adding a bounty because this is driving me nuts.
===[UPDATE+2]===
(sigh), Here's more things to try (which apparently work for others, but did not work for me):
this guy changed his compile settings, and it worked (from thread at http://forums.codeguru.com/showthread.php?249603.html):
Project->Settings->C++ tab, Debug cathegory: Inline function expansion: change from 'None' to 'Only _inline'.
the above thread references another thread where the had to re-install MSVC
it is possibly related to linking modules with "subtle-differences" in possibly-incompatible compiler and/or link switches. Check that all the "contributing libs" are built with the exact same switches
Here's some more symptoms/observations on this error/bug:
list(s) for above issues still apply
the issue seems to "start-showing-up" with MSVC2005, and continues with the same behavior for MSVC2008 and MSVC2010 (error still occurs after porting code to newer compilers)
restarting IDE, rebooting machine doesn't seem to work for anybody
one guy said an explicit "clean" followed by a recompile worked for him, but many others say it did not work for them
is often related to "incremental linking" (e.g., turn it off)
Status: No joy.
===[UPDATE+3 : LINK SUCCESS]===
Super-wacky-makes-no-sense fix to successfully link discovered!
This is a variation on (above), where you "fiddle-with-the-code-until-the-compiler-and/or-linker-behaves". NOT GOOD that one might need to do this.
Specific single linker-error (LNK1179) was for MyMainBody<>():
#include "MyClassA.hpp"
#include "MyClassB.hpp"
#include "MyClassC.hpp"
#include "MyClassD.hpp"
#include "MyMainBody.hpp"
int main(int argc, char* argv[])
{
// Use a function template for the "main-body",
// implementation is "mostly-simple", instantiates
// some local "MyClass" instances, they reference
// each other, and do some initialization,
// (~50 lines of code)
//
// !!! LNK1179 for `MyMainBody<>()`, mangled name is ~236 chars
//
return MyMainBody<MyClassA,MyClassB,MyClassC,MyClassD>(argc,argv);
}
THE FIX:
Convert MyMainBody<>() from a "template<>" to an explicit function, LINK SUCCESS.
THIS FIX SUX, as I need the EXACT-SAME-CODE for other types in other utilities, and the MyMainBody<>() implementation is non-trivial (but mostly simple) instantiations-and-setups that must be done in a specific way, in a specific order.
But hey, it's a temporary work-around for now: Confirmed on MSVC2008 and MSVC2010 compilers (same LNK1179 error for each, successful link on each after applying the work-around).
THIS IS A COMPILER AND/OR LINKER ERROR, as the code is "simple/proper-C++" (not even C++11).
So, I'm happy (that I got a link after suffering full-time for 2+weeks). But, disappointed (that the compiler and/or linker has a STUPID GLARING PROBLEM with linking a SIMPLE TEMPLATE<> in this use-case that I couldn't figure out how to address).
FURTHER, the "Bounty Ended", but nobody else wanted to take this on (no other answers?), so looks like "+100" goes to nobody. (heavy-sigh)
This question has a lot of answers but none of them quite capture what was happening in my codebase, and what I suspect the OP was seeing back in 2012 when this question was asked.
The Problem
The COMDAT error on an IID_* type is easy to accidentally reproduce by using the #import directive with both the rename_namespace and named_guids attributes.
If two #imported type libraries contain the same interface, as is likely the case for OP's IXMLDOMImplementation, then the generated .tlh files will declare IID_IXMLDOMImplementation in both namespaces, leading to the duplicate.
For example, the code generated for:
#import <foo.tlb> rename_namespace("FOO") named_guids;
#import <bar.tlb> rename_namespace("BAR") named_guids;
...could be simplified into something like this:
namespace FOO {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
namespace BAR {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
Here's a simple RexTester reproduction of the problem: https://rextester.com/OLAC10112
The named_guids attribute causes the IID_* to be generated and the rename_namespace attribute wraps it in the namespace.
Unfortunately, in this case, extern "C" does not seem to work as expected when it appears inside a C++ namespace. This causes the compiler to generate multiple definitions for IID_FOOBAR in the same .obj file.
DUMPBIN /SYMBOLS or a hex editor confirms the duplicate symbols.
The linker sees these multiple definitions and issues a duplicate COMDAT diagnostic.
A Solution
Knowing that rename_namespace doesn't play well with named_guids, the obvious solution is to simply not use them together. It's probably easiest to remove the named_guids attribute and instead use the _uuidof() operator.
After removing named_guids from #import directives and touching up the code, replacing all uses of FOO::IID_IFooBar with _uuidof(FOO::IFooBar), my COM-heavy codebase is back to building again.
This issue is reported as a bug in some specific versions of Visual Studio 2017. Try patching 15.9.1 or later to fix this issue
Reported Issue in VS 15.8 Preview 4
Resolved patchs in VS 15.9 Preview 2
I encountered this problem whilst porting some code (1) from MSVC to GCC. To get the build to link on GCC, I had to provide empty implementations for some specialised templated functions (2), and this resulted in LNK1179 on MSVC. I was able to resolve by inlining the functions (3), i.e.
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b);
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
template<> template<> inline void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
I had to do
c++ -> code generation -> enable function - level linking -> no
Hopefully my lame workaround will help someone: I make sure to manually delete ALL .obj AND intermediate build files (including at least .pch, .pdb, .tlog, .lastbuildstate and anything else just hanging out looking suspicious) and rebuild from scratch.
I suggest without evidence that having some files left over from a previous build tends to cause the problem to happen more frequently. In my specific build system, I delete and recreate the .vcxproj and .sln files from scratch as well.
My own personal suspicion is that some kind of race condition exists in the build/link process between the time that intermediate files are read and the time they are written in a large project. Again, I have no evidence this is true, but this is my only guess that seems to fit all the known facts of the bug.
I wrote Outlook addins years ago and I was asked to write another. Right off the bat, I ran into this problem and through a little process of elimination, I fixed mine.
It turns out that when you choose an extensibity project(I hand coded mine back in the day), it creates and save 2 objects that I was unaware of: DTE and DTE80. To create the interfaces that manipulate these objects, they import directly from the DLLs in stdafx.h. Being that I'm working on Outlook, I also needed to import a couple of interfaces: Office and Outlook.
So, seeing as this error popped up almost immediately after writing my first tidbits of code, I started over, and added one thing at a time. The project blew chunks in the described way right after I added:
//Added mvc
//The following #import imports MSO based on it's LIBID
#import "libid:2DF8D04C-5BFA-101B-BDE5-00AA0044DE52" version("2.2") lcid("0") rename_namespace("Office") raw_interfaces_only named_guids
using namespace Office;
//The following #import imports Outoloks Object lib based on it's LIBID
#import "libid:00062FFF-0000-0000-C000-000000000046" rename_namespace("Outlook") raw_interfaces_only named_guids
using namespace Outlook;
So, seeing as I had no intention of figuring out the DTE stuff, I just commented out them and anything having to do with them:
//The following #import imports VS Command Bars based on it's LIBID
// #import "libid:1CBA492E-7263-47BB-87FE-639000619B15" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE based on it's LIBID
// #import "libid:80cc9f66-e7d8-4ddd-85b6-d9e6cd0e93e2" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE80 based on it's LIBID
// #import "libid:1A31287A-4D7D-413e-8E32-3B374931BD89" version("8.0") lcid("0") raw_interfaces_only named_guids
After wandering around fixing the compile errors, it compiled and linked just fine. I'm not suggesting this will work for everybody, but it worked for me. Good luck to any who pass by here....
I got this error and was really confused about it. Ended commenting out everything in the referenced cpp and reintroduce things in small batches until the file was back in the same state as when I started. And I don't get the error anymore. To me this points to this in my case being a bug in the compiler but since I can't reproduce it anymore I can't get help further than that.
I'm on:
Microsoft Visual Studio Professional 2019
Version 16.11.3
I'm having some real difficulties porting a really old Visual Studio 97 C++ project to Visual Studio 2010. Let me begin by first giving a little background on the errors I was getting immediately prior to this new LNK1224 error because they may be related, but I'm not sure.
Prior to my new error I was receiving this error:
error LNK2005: "void __cdecl operator delete(void *)" (??3#YAXPAX#Z) already defined in LIBCMT.lib(delete.obj) nafxcw.lib(afxmem.obj)
Through some digging I found that the reason for this error was because both the MFC and CRT libraries contain definitions for "new" and "delete" so they were colliding. Microsoft provides 2 solutions for this detailed in http://support.microsoft.com/kb/q148652/ . One of them was to make sure that in all your files you always include the MFC headers (afx stuff) first. Well there are about 100 files in this project and I just got tired of trying to find the files that were including resources in the wrong order. So I went with the other solution which is basically forcing libraries to load in a particular order. Basically you have to tell the compiler to ignore a particular library so that you can load it explicitly your self in the order that you choose. In my case, it was nafxcw.lib.
So under Project Properties --> Linker --> Input, I explicitly ignored nafxcw.lib and then explicitly included it at the front of the list.
So after doing this, my LNK2005 errors went away. But they were replaced with one single link error.
error LNK1224: invalid image base 0x287600000
I don't know if I fixed my previous link errors correctly and this new link error is in fact the next thing I have to deal with, or I simply created a more critical link error that is basically stopping the linking process before it gets to my original LNK2005 errors. In either case, there isn't much information I could find on this error. Microsoft doesn't say much in this link about it http://msdn.microsoft.com/en-us/library/3ya3f8wz%28v=vs.80%29.aspx
You specified an invalid base address for the image. Base addresses must be 64KB aligned (the last four hex digits must be zero) and image base must fit within a 32-bit signed or unsigned value.
This isn't all that helpful to me and there seems to be no other clues as to where this problem is coming from. I don't know what the next step is.
OK, so it looks like I have solved my own problem. Here is what I did. I needed to know where the heck this number was coming from so I simply used Notepad++ to do a word search through all the project files looking for "2876" which I got from the error message "LINK : fatal error LNK1224: invalid image base 0x287600000". I found that in the project file (.vcxproj) had the following entry in it:
<BaseAddress>0x287600000</BaseAddress>
So I opened it up and sat there wondering how this number was wrong. I mean I don't even know what this field is for. I didn't even generate this file, M$ made it. Why would the IDE create it's own input file incorrectly? Anyways, as I was trying to google this "BaseAddress" item to figure out what it was, it dawned on me that it looked like there were too many zero's. So I went back and counted and sure enough, this wasn't a 32-bit number, it was a 36-bit number. Deleted one of the zero's, recompiled, and boom it worked. Low and behold, that's kind of what the defintion I looked up, mentioned in the problem statement, hinted at looked up earlier on MSDN but it didn't click.
I don't make a habit to rummage through auto generated files very often so I never questioned that this may be the problem.
I am trying to build an old version of an application which consists of VC++ projects that were written in Visual Studio 2003.
My OS is Windows 7 Enterprise (64-bit).
When I try and build the solution I get the following errors:
error C4772: #import referenced a type from a missing type library; '__missing_type__' used as a placeholder
fatal error C1084: Cannot read type library file: 'Smegui.tlb': Error loading type library/DLL.
They both complain about the following import statement:
#import "Smegui.tlb" no_implementation
This is not a case of the file path being incorrect as renaming the Smegui.tlb file causes the compiler to throw another error saying it cannot find the library.
Smegui is from another application that this one depends on. I thought perhaps I was missing a dll but there is no such thing as Smegui.dll.
All I know about .tlb files is that they are a type library and you can create them from an assembly using tlbexp.exe or regasm.exe (the later also registers the assembly with COM)
There is also an Apache Ant build script which uses a custom task to invoke devenv.com to build the projects. This is the same script that the build server originally used to build the application. It gives me the same errors when I try and run it.
The strangest thing about this is that I knew it ought to work seeing as it is all freshly checked out from subversion. I tried many different combinations of admin vs user elevation, VS vs Ant build, cleaning, release.
I have got it to build successfully about 5 times but the build seems to be non-deterministic.
If anyone can shed some light on how this tlb stuff even works or what this error might mean I would greatly appreciate it.
I found a far more reliable solution: open the tlb with oleview.exe and then close it.
Not sure what this actually does but it works every time.
I think oleview is actually one of the samples included with Visual Studio but I haven't had the time to debug it and see what it is doing.
I ran into this error because one type library was trying to load a dependent type library, which it could not find. Even though the dependent type library was in the same directory, and even though that directory was in the searchable path, the compiler would error loading the first type library, but not mention the dependent type library in the error.
To find the pseudo-missing type library, I ran Process Monitor (procman64.exe) during the compile. This showed that after the reported type library had successfully loaded, a dependent type library could not be found. It even showed all of the places that it was looking for the dependent type library, none of which were where it should have been looking (e.g.: ).
The fix was to add a <PreBuildEvent> to the project to copy the dependent .tlb file to one of the directories that was actually being searched.
<PreBuildEvent>
<Command>copy /Y ..\Lib\Interop\CWSpeechRecLib.tlb .\</Command>
</PreBuildEvent>
http://msdn.microsoft.com/en-us/library/sce74ah7%28VS.71%29.aspx
smegui.tlb is referencing some other tlb that the compiler can't find. If you have the .idl for smegui you might be able to figure out what the other is. I suspect the missing tlb is something that original build machine had registered but that your machine doesn't have registered.
A type library is a binary description of a set of interfaces, coclasses and enums. They're usually generated for COM components, in the case of tlbexp and regasm the tlb is created from the assembly metadata. For native COM components they are usually generated from an idl (Interface Description Language) file by the midl tool.
Edit:
I just noticed you're on x64 Windows. Are you building the project with a new version of Visual Studio? If so, are you targeting x86 or x64? If the latter, it may simply be a 32bit component that the compiler can't find (or less likely, a x64 component the x86 compiler can't find if you are targeting x86), for WOW64 the registry is virtualized for x86 vs. x64 applications.
Well I finally found out why I managed to get it to build sometimes and not others... sort of.
So long as I ran the build script with elevated administrator permissions and let that get as far as it could until that error occurred, then run the build script again as a protected administrator succeeded. Those steps must be done in that exact order with no other steps in between. If I try build in Visual Studio it does not work (although I did get it to succeed once). Probably some kind of virtualisation issue although it still doesn't quite make sense.
Well I don't need help on this any more and I know it's probably impossible to fully answer this question without knowing exactly what the build is doing. However if anyone does have any more thoughts I would happily receive them.
Cheers,
Steiny