I am using below release of redhat
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.4 (Santiago)
I am trying to install puppet master on this server.
Here is what I did:
rpm --quiet -ivh http://yum.puppetlabs.com/el/6/products/x86_64//puppetlabs-release-6-10.noarch.rpm
yum install puppet-master
Setting up Install Process
No package puppet-master available.
Error: Nothing to do
I guess I need different package than what I have, Could someone point me to right direction here.
Thanks for your help.
Looks like you might have a typo in the URL you used.
rpm -ivh http://yum.puppetlabs.com/el/6/products/x86_64/puppetlabs-release-6-10.noarch.rpm
yum install -y puppet-server puppet facter
The package is puppet-server not puppet-master
sudo yum install puppet-server
Related
I'm installing HDP 2.6 on centos 6(no internet access on that machine) and its required redhat-lsb-core->crontabs->cronie->dailyjobs.
I googled for dailyjobs (cronie-anacron), but yum localinstall says:
needs cronie = 1.4.4-16.el6_8.2.
This is vicious circle.
Please help me find out how to localinstall cronie
solved this only mounted repo dvd iso centos. dunno why this rpm not installed without it
Install cronie and cronie-anacron at same time. They have dependencies crossed.
rpm -i cronie-xxxx.rpm cronie-anacron-xxxx.rpm
Install Abaqus CAE on ubuntu, after selecting install directory and proceed, got following error
Creating child process failed. Log ID is 0001
Action LaunchAPpAction from freature CODE\Linux_a64\SIMCAE_TP.PRD FAILED.
Action ID: verifyNoDeltaInstall
Anybody know how to solve this problem? Thx
Had the same problem. Solved by installing glibc.
On RHEL6
sudo yum install glibc.i686
On Ubuntu 16.04 with Abaqus2017, I installed
sudo apt-get install lsb-core
sudo apt-get install libjpeg62
to get rid of this error
I had to install perl on Red Hat Enterprise Linux release 8.5 (Ootpa) to fix it:
yum install perl
CentOS 7 has been out nearly a year now. Has anyone installed RedHawk on CentOS 7? I do not see binaries available on the RedHawk download page. Has anyone successfully built it from sources? Are there issues?
I also do not find RPMs for omniORB-servers or omniORB-devel. Has anyone succeeded in building these on CentOS7?
Terry, Ive built redhawk yum repositories for CentOS7 which you can find below however a few things to note:
As Ryan pointed out, currently redhawk only officially supports CentOS6 and Ubuntu, these rpms are not offically built and distributed by redhawksdr.org. However if you do have any issues with them or find any problems please feel free to feed this back to me.
These RPMs were originally built prior to Fedora packaing omniORB 4.2. To account for this, I built and packaged omniORB 4.1 for CentOS7 which is the same version redhawk uses on CentOS6. My omniORB41 package and EPEL's omniORB (v4.2) package conflict so you cannot have the epel package installed. I have not tested redhawk with omniORB 4.2 which is why I packaged the older 4.1 version.
You can find the 1.10.1 yum repository here:
http://yum.axiosengineering.com/redhawk/1.10.1/el7/x86_64/
I will hopefully soon update with 1.10.2
You will also need the dependency repository here:
http://yum.axiosengineering.com/redhawk-deps/1.10/el7/x86_64/
To install via yum, create the file /etc/yum.repos.d/redhawk_axios.repo
With the following text:
[redhawk]
name=UNOFFICIAL REDHAWK 1.10.1
baseurl=http://yum.axiosengineering.com/redhawk/1.10.1/el7/x86_64/
enabled=1
gpgcheck=0
[redhawk-deps]
name=UNOFFICIAL REDHAWK DEPS
baseurl=http://yum.axiosengineering.com/redhawk-deps/1.10/el7/x86_64/
enabled=1
gpgcheck=0
Then from a terminal:
sudo yum clean all
sudo yum install redhawk* frontendInterfaces* bulkioInterfaces* GPP-*
REDHAWK is only officially supported on CentOS 6 and Ubuntu 14.04. omniORB should now be in Fedora EPEL 7:
https://apps.fedoraproject.org/packages/omniORB
I recently installed Redhawk 2.3.0 on Centos 7.9 by following these instructions https://redhawksdr.org/2.3.0/manual/installation/
The exact commands I used:
mkdir ~/Documents/Redhawk
cd ~/Documents/Redhawk
sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
wget https://github.com/RedhawkSDR/redhawk/releases/download/2.3.0/redhawk-yum-2.3.0-el7-x86_64.tar.gz
tar xzvf redhawk-yum-2.3.0-el7-x86_64.tar.gz
cd redhawk-2.3.0-el7-x86_64
sudo yum install -y redhawk-release*.rpm
sudo nano /etc/yum.repos.d/redhawk.repo
Content of /etc/yum.repos.d/redhawk.repo:
[redhawk]
name=REDHAWK Repository
baseurl=file:///home/causer/Documents/Redhawk/redhawk-2.3.0-el7-x86_64
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhawk
Once the file is saved (ctrl+x, y), in the same directory as before:
sudo yum groupinstall "REDHAWK Runtime"
. /etc/profile.d/redhawk.sh
. /etc/profile.d/redhawk-sdrroot.sh
sudo /usr/sbin/usermod -a -G redhawk causer
sudo nano /etc/omniORB.cfg
sudo $OSSIEHOME/bin/cleanomni
sudo systemctl enable omniNames.service
sudo systemctl enable omniEvents.service
Copy redhawk.desktop to the desktop and run it (rpm -qpl on the redhawk-ide-xyz.rpm its near the bottom of the list)
sudo yum install java-1.8.0-openjdk-javadoc
I was installing libapr-util1-1.3.9-4.1.x86_64 on RHEL v6.6 and it requires libapr-1.so.0 as a dependency. I've searched a lot and couldn't find.
The only rpm I found was vulture-common-3.2-185.1.x86_64.rpm which installs a lot of other packages as well that will conflict with already installed servers and software on my machine.
Does anyone know from where I can get this rpm? Or how to select specific part from the rpm to be installed?
For me yum whatprovides 'libapr-1.so.0' shows apr-1.3.9-5.el6_2.i686 is the package, on my CentOS 6.6.
For CentOS 7.7 I had the same error when trying to configure and compile mesos.
I had to install some additional libraries:
sudo yum install -y git apache-maven python-devel java-devel zlib-devel libcurl-devel openssl-devel cyrus-sasl-devel cyrus-sasl-md5 apr-devel subversion-devel apr-util-devel
For me yum install apr , on my CentOS 7.x.
Try to search for apr-1.4.8-7.el7.x86_64.rpm and apr-util-1.5.2-6.e7.x86_64.rpm
Any installation or update using yum command I ended up error: Error: xz compression not available. On website I read that Python library is missing. When you try to install a library (sudo yum update pyliblzma) again failed with error. Do not know how? Thanks.
This problem comes if you installed a wrong epel release on your machine. If so, then you need to remove the epel release by
yum remove epel-release
Sometimes that is not enough, you need to remove the cache as well by:
rm -rf /var/cache/yum/x86_64/6/epel
Then you can install the epel-release again
yum -y install epel-release
You need install the EPEL repository by downloading the appropriate RPM package for your system and installing it. For example, for CentOS and Red Hat Enterprise Linux 6.x:
wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
sudo rpm -Uvh epel-release-6*.rpm
If you get a File Not Found error message when trying to download the package, the version number might have changed. You can access the latest version of the RPM installer from the Fedora EPEL wiki page. The wiki page also includes additional instructions for Red Hat Network subscribers who are installing the EPEL repository.
Finally, install the Python library:
yum install pyliblzma
This works perfecly in my CentOS 6.x.
I've found a solution on this page of stackexchange, working in CentOS 6.X:
https://unix.stackexchange.com/a/314756
sudo rpm -e epel-release-7-5.noarch
wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
sudo rpm -ivh epel-release-6-8.noarch.rpm
sudo yum clean all
sudo rpmdb -v --rebuilddb
sudo yum -y install libselinux-python
I was also suffering from this issue..
If you are installing packages but it is already available on your system.
Remove existing packages and then try to install new.
It will work properly...
I was able to solve this problem by installing pyliblzma using rpm instead of yum as yum is not working.
Find pyliblzma rpm package according to your architecture and install it using the command.
rpm -Uvh pyliblzma-version-release.architecture.rpm
I used the following command to install pyliblzma for my 64 bit Redhat 6.8 machine. Please check URL in the command and make changes accordingly.
rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/pyliblzma-0.5.3-3.el6.x86_64.rpm
In my case the issue was caused by missing modules in python's site-packages directory. Here's what I did:
$ rpm -Va
to get a list of all files belonging to all rpms that do not verify. I got a bunch of messages about missing modules:
missing /usr/lib64/python2.7/site-packages/...
Luckily, I had an identical CentOS version elsewhere with all these packages present, so I just copied them over and ran
$ rpmdb -v --rebuilddb
to rebuild rpm database.