I just installed Linux Mint (version 17.2) and I'm trying to install Ember. Everything seemed to go fine, but I'm getting this error when I run ember new testProject.
create vendor/.gitkeep
EACCES, mkdir '/home/mkm/.npm/mkdirp/0.4.2'
Error: EACCES, mkdir '/home/mkm/.npm/mkdirp/0.4.2'
at Error (native)
Per a recommendation in the Ember Documentation I used this guide to install Node.js and NPM. Some of what I've read suggest the issue is nodejs was installed with sudo, but apt-get failed when I didn't use sudo.
I attempted to run the new project anyway. bower install completed successfully. But ember serve failed with Cannot find module 'chalk'.
--Version Info
$ ember --version
version: 1.13.8
Could not find watchman, falling back to NodeWatcher for file system events.
Visit http://www.ember-cli.com/user-guide/#watchman for more info.
node: 0.12.7
npm: 2.13.4
os: linux x64
The only command that was needed to run with sudo for me was:
npm install
I suggest you delete node_modules/ in your project directory completely, then run:
sudo npm install
You can also add option --verbose to see if everything is correctly installing and installation isn't stuck.
You could also change permissions for .npm directory to avoid some problems like that in future:
sudo chmod 777 -R /home/mkm/.npm
You can use following commands to install and use npm without sudo:
wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.25.4/install.sh | NVM_DIR="/home/your-user-name/.nvm" bash
export NVM_DIR="/home/your-user-name/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
nvm install 0.12
nvm alias default 0.12
npm install -g ember-cli
npm install -g bower
npm install -g phantomjs
Here is a link to nvm repository with latest version and documentation: https://github.com/creationix/nvm
When node (v.0.10.33) is installed with homebrew (v. 0.9.5), at one point it says:
==> Caveats
If you update npm itself do NOT use the npm upgrade command
Instead execute:
npm install -g npm#latest
So, what exactly is npm upgrade and what is the difference with npm install -g npm#latest?
-- edit 2015
the problem doesn't exist anymore with the current version of node. (but I never had an answer to what npm upgrade is?)
Use npm install to install a package and npm update to update a package.
That Homebrew npm caveat was removed after the issue with npm update -g was fixed.
npm comes bundled with node, both part of Node.js install --- no need to install separately
Below are the steps to install Node.js from source (OSX/linux)
Issue cmds as yourself NOT root (sudo)
to start fresh remove prior node and npm installs as well as these :
sudo mv ~/.npmrc ~/.npmrc_ignore
sudo mv ~/.npm ~/.npm_ignore
sudo mv ~/tmp ~/tmp_ignore
sudo mv ~/.npm-init.js ~/.npm-init.js_ignore
download source from : http://nodejs.org/download/
cd freshly-downloaded-dir
define environment variable NODE_PATH as the dir for subsequent module installs
export NODE_PARENT=${HOME}/nodejs-v0.10.33
export PATH=${NODE_PARENT}/bin:${PATH}
export NODE_PATH=${NODE_PARENT}/lib/node_modules
./configure --prefix=${NODE_PARENT}
make
make install # IMPORTANT this is NOT using sudo
# not wanted since installing into $USER owned $NODE_PARENT
which puts it into dir defined by above --prefix
when you use syntax : npm install -g some_cool_module
the -g for global installs it into dir $NODE_PATH and not your $PWD
Now put above three export xxx=yyy
commands into your ~/.bashrc or some such to persist these environment variable changes
I have 2 nodejs installation v0.8.18 ( executable name is node) and v0.10.20 (executable name is nodejs) in my ubuntu 12.04 system.
when I running npm install how can I specify npm use the executable named "nodejs" instead of "node"
If you in-fact actually want to toggle between various nodejs releases, there is an environment variable NODE_PATH which controls the directory path node uses to reach modules. The other issue is the env var PATH which the unix uses to reach executables, IE. node and npm
Additionally, node/npm uses these dirs/files :
~/.npmrc
~/.npm
~/tmp
~/.npm-init.js
those may or may not be impacted by different releases of node.
If you install each release from source code you have full control of NODE_PATH and PATH
source code for all releases available at http://nodejs.org/dist/
Below are the steps to install a given release from source
NOTE - this installs nodejs which gives you both node as well as npm, they come together per release.
to start fresh remove prior node.js and npm installs as well as these :
sudo mv ~/.npmrc ~/.npmrc_ignore
sudo mv ~/.npm ~/.npm_ignore
sudo mv ~/tmp ~/tmp_ignore
sudo mv ~/.npm-init.js ~/.npm-init.js_ignore
to install nodejs and npm as yourself NOT root do these commands (OSX/linux) :
parent_dir=${HOME}/bin_xxxx # replace bin_xxx with something specific
# to node release like bin_v0.10.31
mkdir ${parent_dir}
download source from : http://nodejs.org/download/
cd node-v0.xxxx
./configure --prefix=${parent_dir}/nodejs
make -j8
make install
which puts it into dir defined by above --prefix
export PATH=${parent_dir}/nodejs/bin:$PATH
define environment variable NODE_PATH so node can find dir for modules otherwise
npm install xxx will put newly installed module into dir in curr dir :
export NODE_PATH=${parent_dir}/nodejs/lib/node_modules
do above AND use syntax : npm install -g some_cool_module
always use the -g for global so it gets installed into dir $NODE_PATH
and not your $PWD
nodejs install gives you npm as well :
ls -la ${parent_dir}/nodejs/bin
My npm in terminal isn't working after Mavericks update.
node app.js works well and runs my app, but when I run npm followed by anything I get -bash: npm: command not found. I know this question has been asked before here:
Global installation with npm doesn't work after Mac OS X Mavericks update
and
How do I install a module globally using npm?
and npm not working after reinstalling Mac OS X
, but none of the answers resolved my situation.
$ echo $PATH /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/usr/local/mongodb/bin
How did you install node.js ? typically it comes bundled with both node and npm, where both are in the same directory. My suggestion is to remove your current install(s) and do the following with just works.
to install nodejs and npm as yourself NOT root do these commands (OSX/linux) :
parent_dir=${HOME}/bin_xxxx # replace bin_xxx with something specific
# to node release like bin_v0.10.31
mkdir ${parent_dir}
download source from : http://nodejs.org/download/
cd node-v0.xxxx
./configure --prefix=${parent_dir}/nodejs
make -j8
make install
which puts it into dir defined by above --prefix
export PATH=${parent_dir}/nodejs/bin:$PATH
define environment variable NODE_PATH so node can find dir for modules otherwise
npm install xxx will put newly installed module into dir in curr dir :
export NODE_PATH=${parent_dir}/nodejs/lib/node_modules
do above AND use syntax : npm install -g some_cool_module
always use the -g for global so it gets installed into dir $NODE_PATH
and not your $PWD
nodejs install gives you npm as well :
ls -la ${parent_dir}/nodejs/bin
For Debian, after installing node do following
curl -k -O -L https://npmjs.org/install.sh
ln -s /usr/bin/nodejs /usr/bin/node
sh install.sh
I have just reinstalled Ubuntu 12.04 LTS, and before anything else i did these steps:
Installed Node via package manager with the following script
sudo apt-get update
sudo apt-get install python-software-properties python g++ make
sudo add-apt-repository ppa:chris-lea/node.js
sudo apt-get update
sudo apt-get install nodejs
Tried to install yeoman, express, n, yeoman's generators globally and all of them returned the same error
npm ERR! Error: EACCES, symlink '../lib/node_modules/n/bin/n'
npm ERR! { [Error: EACCES, symlink '../lib/node_modules/n/bin/n'] errno: 3, code: 'EACCES', path: '../lib/node_modules/n/bin/n' }
npm ERR!
npm ERR! Please try running this command again as root/Administrator.
npm ERR! System Linux 3.8.0-29-generic
npm ERR! command "/usr/bin/node" "/usr/bin/npm" "install" "-g" "-d" "n"
npm ERR! cwd /home/heberlz
npm ERR! node -v v0.10.20
npm ERR! npm -v 1.3.11
npm ERR! path ../lib/node_modules/n/bin/n
npm ERR! code EACCES
npm ERR! errno 3
npm ERR! stack Error: EACCES, symlink '../lib/node_modules/n/bin/n'
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/heberlz/npm-debug.log
npm ERR! not ok code 0
Reclaimed ownership of the following folders recursively ~/.npm, /usr/lib/node, /usr/lib/node_modules, and of the following symlinks /usr/bin/node, /usr/bin/nodejs with absolutely no success
I need to install yeoman and its generators without sudo not to be in trouble later on :(
Ubuntu 12.04 and using Chris Lea's PPA for install the following works for me:
npm config set prefix '~/.npm-packages'
and adding $HOME/.npm-packages/bin to $PATH
Append to .bashrc
export PATH="$PATH:$HOME/.npm-packages/bin"
For more see this answer from #passy
If you already have $HOME/bin in your path, a simpler solution is just ...
npm config set prefix ~
New node commands will now install into your $HOME/bin directory.
No need to change your path!
Since this discussion is really about reducing the security risks of running sudo, you should also be aware that any node app could potentially be installing an app name that does not match the registered node package name you think you're installing. So there is a security risk that an npm install will replace an existing system command or one you already have in $HOME/bin. If you're concerned, check the bin, and scripts properties in the package.json file of the app you're installing first.
In general, it's safest to:
(a) Place $HOME/bin last in your path so system commands are not superseded.
(b) don't include "." or any relative path in your $PATH so you don't accidentally run a command that happens to be in the current directory.
Reference:
package.json properties
npm install
NodeJS security vulnerabilities: nodesecurity.io.
As for October 2014:
Node.js is available from the NodeSource Debian and Ubuntu binary distributions repository.
curl -sL https://deb.nodesource.com/setup | sudo bash -
sudo apt-get install -y nodejs
That's it.
Outdated answer:
The fastest way without using sudo is like described here by isaac
I strongly encourage you not to do package management with sudo!
Packages can run arbitrary scripts, which makes sudoing a package
manager command as safe as a chainsaw haircut. Sure, it's fast and
definitely going to cut through any obstacles, but you might actually
want that obstacle to stay there.
I recommend doing this once instead:
sudo chown -R $USER /usr/local
EDIT:
There are certain security concerns and functionality limitations regarding changing the ownership of /usr/local to the current user:
if there is another user on the machine who could use global npm packages - do not change the ownership of /usr/local
https://apple.stackexchange.com/questions/1393/are-my-permissions-for-usr-local-correct
https://askubuntu.com/questions/261326/is-it-safe-to-chown-usr-local
Having said that, if you want to install global module without using sudo, I don't see any better solution (from pragmatic point of view) than mentioned. Security vs easy of use is very broad topic, and there is no easy answer for that - it just depends on your requirements.
The issue was i installed node using sudo, to avoid errors when installing npm modules globally one MUST NEVER install node with sudo.
My solution was to reinstall node it this way:
Download latest stable node sources from nodejs.org #in my case node-v0.10.20.tar.gz
tar -zxf node-v0.10.20.tar.gz #uncompress sources
cd node-v0.10.20 #enter uncompressed folder
sudo chown -R $USER /usr/local
./configure --prefix=/usr/local && make && make install
One thing to note is that only taking ownership of the /usr/local folder wouldn't work in my case because node installation itself was made with sudo
Last step to install yeoman: #although at yeoman.io it says that doing "npm install -g yo" already installs bower and grunt, there are some submodules of grunt that fail, so i fixed that by installing it by itself
npm install -g bower
npm install -g grunt
npm install -g yo
npm install -g generator-angular
I solved this problem with environment variable and shell alias:
export NPM_PREFIX=$HOME/node
alias npmg="npm -g --prefix $NPM_PREFIX"
For me npm did not honor the "prefix" config setting in .npmrc.
Find the path to npm's directory:
npm config get prefix
For many systems, this will be /usr/local.
Change the owner of npm's directories to the name of the current user (your username!):
sudo chown -R $(whoami) $(npm config get prefix)/{lib/node_modules,bin,share}
This changes the permissions of the sub-folders used by npm and some other tools (lib/node_modules, bin, and share).
Here is the link for full details
https://docs.npmjs.com/getting-started/fixing-npm-permissions
According to this similar SO post: npm throws error without sudo
Looks like you might have an ownership issue with ~/.npm directory.
As with the answer in that one, try:
sudo chown -R `whoami` ~/.npm
If you're on a developping machine, you might be better off considering using nvm.
If not, you simply want to install using your favorite package manager.
Whatever the case may be, I'd recommend checking this answer on stackoverflow
Actually, I just changed the permission of a user folder that was owned by root:
sudo chown -R $USER ~/.config/configstore
Then I could "npm install" and "bower install" without sudo!
Worked fine!
using lubuntu 14.04.3, I tried changing ownership of .npm and npm prefix, updated my path, npm installed modules to my home directory without sudo but the path was incorrect so the modules like ember were not found, linuxbew solved the problem, quick setup guide here for node/npm
This issue and other caused by the same reason can be solved installing Node in user space.
You can do it just copying and pasting in your terminal
NODEJS_ROOT=${NODEJS_ROOT:-~/nodejs}
cd /tmp
wget -N http://nodejs.org/dist/node-latest.tar.gz && tar xzf node-latest.tar.gz
NODEJS_CURRENT=$(tar tf node-latest.tar.gz|head -1)
mkdir -p $NODEJS_ROOT/$NODEJS_CURRENT
cd $NODEJS_CURRENT
./configure --prefix=$NODEJS_ROOT/$NODEJS_CURRENT && make install
cd $NODEJS_ROOT
rm current 2> /dev/null # Removes current symbolic link, if any
ln -s $NODEJS_CURRENT current
Same commands can be launched also to get Node updated to latest version.
Don't forget to edit your environment. Only once, do
echo "export NODEJS_ROOT=$NODEJS_ROOT" >> $HOME/.bash_profile
echo 'export PATH=$NODEJS_ROOT/current/bin:$PATH' >> $HOME/.bash_profile
source $HOME/.bash_profile # reload your env, so you can use node right now
Check out this article as a reabout how to Install Node.js without sudo.
For a more general solution about this topic (i.e., install software locally) see dotsoftware.
just use nvm
you will be able to dynamically switch between different node versions and it is installed locally for your user. No sudo needed. Just make sure you have fully cleaned up the old node beforehand.
https://github.com/nvm-sh/nvm
In order to install Node.js and npm locally without having to use sudo open the terminal and type:
echo 'export PATH=$HOME/local/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
mkdir ~/local
mkdir ~/node-latest-install
cd ~/node-latest-install
wget -c http://nodejs.org/dist/node-latest.tar.gz | tar xz --strip-components=1
./configure --prefix=~/local
make install
wget -c https://www.npmjs.org/install.sh | sh
Use NVM
I had the same "permission denied" issue. Instead of trying to fix the NodeJS installed from https://nodejs.org/en/ which installs into folders that are owned by root instead of $USER, I used NVM. node version manager.
Install it: run curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/install.sh | bash
Install a version of node: run nvm install 16
Use it:
nvm use 16
npm install -g yarn
Everything worked fine when I used Node installed by NVM.
The best solution I found was to install Node.js from the tar package on to user home directory & link the lib folder location. Here is what you need to do
This will install Nodejs under ~/.local/ instead of the default /usr/local/
Add this to your ~/.npmrc (create the file if it doesn't exist already):
root = /home/YOUR-USERNAME/.local/lib/node_modules
binroot = /home/YOUR-USERNAME/.local/bin
manroot = /home/YOUR-USERNAME/.local/share/man
Download the Nodejs source code from nodejs.org and install it under your ~/.local tree:
tar xf node......
cd node........
./configure --prefix=~/.local
make
make install
Create ~/.node_modules symlink. (This directory will be automatically searched when you load modules using require "module" in scripts. I'm not sure why Node doesn't search ~/.local/lib/node_modules by default.)
cd
ln -s .local/lib/node_modules .node_modules
Is ~/.local/bin in your path? Type
which npm
If it says ~/.local/bin/npm, you're done.
Otherwise, do this...
export PATH=$HOME/.local/bin:$PATH
...and add that line to your ~/.profile file, so it'll run every time you log in.
If you still encounter ownership or permission error while installing packages, then change ownership of ~/.local/ dir by running
chown -R user:user ~/.local/
Now you should be good to install packages via 'npm'
Note: ALL OF THE ABOVE COMMANDS ARE TO BE RUN AS USER. DO NOT USE SUDO OR ROOT LOGIN
NEVER EVER CHANGE THE PERMISSION OF FOLDERS UNDER '/USR/LIB/'. WILL LEAD TO UNSTABLE OS
I find Pawel Grzybek's explanations very convincing: They boil down to 3 simple sudo commands, never having to use sudo again for global npm installs:
sudo chown -R $(whoami) /usr/local/lib/node_modules
sudo chown -R $(whoami) /usr/local/bin
sudo chown -R $(whoami) /usr/local/share