I have been using a graphics library from Smaller Animals Software called ImgSource. Unfortunately, Smaller Animals Software has closed and is no longer available to answer questions. Recently, I had a system failure that deleted my only up-to-date copy of the library (I thought I had a backup but was wrong). I did, however, have the source code. I recompiled the library, both release and debug. (Both are static .lib files) I am also using MSVS 2019 Community edition and the project is an MFC project. The problem, and why I'm posting here, is that when I link the new release library with a previous project, the project compiles properly. However, when I build the debug version, it will compile, but not link and produces the linker error discussed LNK2038: mismatch detected for 'RuntimeLibrary': value 'MT_StaticRelease' doesn't match value 'MD_DynamicRelease' in file.obj
A reasonable conclusion is that there is something wrong with the debug library. However, if I build a new project and link the debug library, everything works fine. So, the error does not appear to be in the library. It seems I could start from scratch and completely redo these projects, but they do reflect a tremendous amount of work.
I can't figure out how to modify the settings in the existing projects so that they will compile in debug mode. I have tried the suggestions offered in the article referenced above. Further suggestions would be greatly appreciated.
I want to read the code, more like variable and function names since I can catch values with CheatEngine, of an exe file. I got information about the file from Exeinfo PE which told me
"Microsoft Visual C++ ver. 8.0 / Visual Studio 2005 [ Debug:02 ]"
a screencap from Exeinfo PE
I have identified the code in assembly in some ways using IDA, radare2 and CheatEngine's Memory Table.
I don't know what else I can list so ask me if you need further details. thank you very much.
I believe your question is:
How to view the function and variable names of a compiled program?
When compiled in debug mode, some information will be present in the binary. If there is a .pdb it will contain additional debug information as well.
But when compiled in release mode, C++ itself does not compile in a way in which it retains any variable names or function names or other identifying information such as this.
The only exception to this is RTTI or Run Time Type Information. RTTI you can think of like symbol names for virtual functions. Microsoft Visual C++ predominantly does this but other compilers can as well. RTTI can be parsed and it will give you the class names in relation to the their virtual function tables. If the class does not have virtual functions, you will not find RTTI for it.
The best tool I know of for parsing RTTI is Class Informer which is a plugin for IDA Pro.
I'm trying to write a plugin for 3ds max, I went through the entire sdk installation process to the letter as described in the help files.
The problem I'm facing though is intellisence complaining about an invalid macro definition
"IntelliSense: command-line error: invalid macro definition:_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES_COUNT =1"
I found the definition in project settigs -> c/c++ -> preprocessor definitions as inherited from parent or project default.
I tried disabling the inherited definitions and re-entered them, this time without the space between the name and the = and all works fine so I'm guessing its a typo on their part?
Anyway, I want to change the default project or whatever to not repeat it every time i start a new project. The project is created with a wizard which required me to copy over some files to appear and after which I had to enter the sdk path.
The files I copied are plain text with some fancy extensions and not much in them so I'm guessing the defaults are described in the sdk directory.. somewhere. Does anybody know what kind of a file I'm looking for?
EDIT: I found a file called root.vcxproj_template and it has a section for preprocessor definitions but all it contains is
<PreprocessorDefinitions>_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
and no mention of the broken one
EDIT2: in another part of the file there was a path to a property sheet (maxsdk\ProjectSettings\propertySheets\3dsmax.common.tools.settings) which included the faulty definition. I fixed it an no more complaints from VS.
_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES_COUNT = 1 means that compiler should replace all old C run-time routines such as sprintf, strcpy, strtok with new versions such as strprintf_s, strcpy_s, strtok_s and similar. It goes in pair with following definition _CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES = 1.
More you can find here: (MSDN) https://msdn.microsoft.com/en-us/library/ms175759.aspx. However I tried to use this but without success. It says that you can use this only for statically allocated buffers like char buffer[32], but compilers was still complaining bout unsecure strcpy.
I have a new project where I cannot use boost::format. I get a compiler error complaining that boost's override of a virtual function, ~basic_altstringbuf, lacks a "throw()". Even the most trivial attempt to use boost::format does that.
I have other projects where it works fine. I have verified that the new project uses the same include-paths for boost, and for the VC++ includes. All the projects have "Enable C++ Exceptions" set to Yes. The only explanation I can come up with is that the projects that work have some #DEFINE or some setting that disables those vile exception specs in the std:: include-files. But I have no idea what or where it might be. Any ideas?
Error 1 error C2694: 'boost::io::basic_altstringbuf::~basic_altstringbuf(void)': overriding virtual function has less restrictive exception specification than base class virtual member function 'std::basic_streambuf<_Elem,_Traits>::~basic_streambuf(void) throw()
EDIT: Corollary question: Is there a Properties-item in VS++ 2012 that will cause the std:: header files to be included without exception-specs? - short of turning off exceptions, that is?
At the request of the original owner of the green check-mark, I am submitting this summary.
The bugs are on the Microsoft side, in header-files for C++ standard library interfaces, and in the VC++ compiler when "Disable Language Extensions" is NOT set. The header files contain exception-specifications that the standard does not call for. When "language extensions" are not enabled, the compiler accepts invalid code. I have filed a bug report.
Boost could work around the problem in this specific case by adding seven characters to a nested include-file, i.e. "throw()" at line 65 in alt_sstream_impl.hpp. I filed a report with boost also, although I made it clear that the bug is not in their code. I am just suggesting a workaround.
All the tedious details are in the two reports linked above.
Check the preprocessor defines.
You might turn on and inspect verbose logging to see the exact flags that are passed to cl.exe
You could keep the preprocessed source and compare the version from the old (working) project with the new (failing) project.
My gut says, something else is being #defined/passed using -D in the old project that is not being defined in the new project, of differently (think of WINVER type macros)
See new answer posted: VC++ 2012 and Boost incompatibility - `throw()` specifications in library headers
EDIT by OP, Jive Dadson - It turned out to be /Za, which enables/disables "Microsoft language extensions." It is the contention of Visual Studio that the C++ standard requires that a program shall not compile if it has a virtual function override that is less restrictive in the "throw()" category than the function it overrides. Boost has a class that derives from basic_streambuf, and has a virtual destructor that lacks "throw()". The original destructor has that evil festoon. My new project will compile boost::format if I turn MS language extensions ON.
So the question becomes, who is wrong, and how? Is it standard-complying to put throw() on that destructor or not? Is the desired behavior (desired by me, that is) actually an "extension"? I seem to recall that MS considered some standard C++11 features to be "extensions," but I am not sure I remember correctly. Anyway, I will leave it to the boosters to decide, if they are interested. https://svn.boost.org/trac/boost/ticket/7477
I am getting this single error when I am linking my project,
COMMUNICATION.obj : fatal error LNK1179: invalid or corrupt file:
duplicate COMDAT '_IID_IXMLDOMImplementation'
What is the source of the problem?
This is a tricky one.
The issue is that the symbol(s)-generated is too-long, and an ambiguity exists:
//...
void MyVeryLongFunctionNameUnique_0(void);
void MyVeryLongFunctionNameUnique_1(void);
// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
// (example max-symbol-length-seen-by-linker)
In this case, the linker "sees" these two functions as the "same", because the part that makes them "unique" is longer-than-the-max-symbol length.
This can happen in at least three cases:
Your symbol names are "too-long" to be considered unique to the linker, but may have been fine for the compiler (such as when you expand-out from many nested templates)
You did some "trickery" that is invalid C++, and it passed the compiler, but you now have an invalid *.obj, and it chokes the linker.
You specified duplicate "unnamed" classes/structs, and the linker cannot resolve them.
===[UPDATE]===, It's not your fault, it's an internal problem with the compiler and/or linker (see below for possible work-arounds).
Depending on the issue (above), you can "increase" your symbol-length (by limiting-your-decrease-of-symbol-length), or fix your code to make it valid (unambiguous) C++.
This error is (minimally) described by Microsoft at:
http://msdn.microsoft.com/en-us/library/cddbs9aw(v=vs.90).aspx
NOTE: This max-symbol-length can be set with the /H option, see: http://msdn.microsoft.com/en-us/library/bc2y4ddf(v=vs.90).aspx
RECOMMEND: Check to see if /H is used on your command-line. If it is, delete it (do not specify max-symbol-length, it will default to 2,047, the /H can only DECREASE this length, not increase it).
However, you probably triggered it through the /Gy option (function-level-linking), which was probably implied through one of /Z7, /Zi, or /ZI: http://msdn.microsoft.com/en-us/library/958x11bc(v=vs.90).aspx
One MSDN thread that talks about this issue is:
http://social.msdn.microsoft.com/Forums/en-US/vcmfcatl/thread/57e3207e-9fab-4b83-b264-79a8a717a8a7
This thread suggests that it's possible to trigger this issue with "invalid-C++-code-that-compiles" (you get your *.obj), but that invalid-*.obj chokes the linker (this example attempts to use main as both a function and as a template):
http://www.cplusplus.com/forum/lounge/46361/
===[UPDATE]===
I should have said this before, because I suspected, but I now have more information: It might not be your fault, there seems to be an issue in the compiler and/or linker that triggers this error. This is despite the fact that the only common denominator in all your failed relationships is you.
Recall that the "above-list" applies (it MIGHT be your fault). However, in the case where, "it's not your fault", here's the current-running-list (I'm confident this list is NOT complete).
There is an internal error/corruption in your *.ilk file (intermediate-link-file). Delete it and rebuild.
You have /INCREMENTAL turned on for linking, but somehow that incremental-linking is not working for your project, so you should turn it off and rebuild (Project-Properties=>Configuration Properties=>Linker=>General=>Enable Incremental Linking [set to "No" (/INCREMENTAL:NO)]
There's a problem with "Optimization" for "COMDAT Folding" in your use. Your can "Remove Redundant COMDATs" by going to Project Proerties=>Configuration Properties=>Linker=>Optimization=>Enable COMDAT Folding, set to "Remove Redundant COMDATs (/OPT:ICF)
Here's an interesting thread from a guy who sometimes can link, and sometimes not, by commenting in/out a couple lines of code. It's not the code that is the problem -- he just cannot link consistently, and it looks like the compiler and/or linker has an internal problem under some obscure use case:
http://www.pcreview.co.uk/forums/fatal-error-lnk1179-t1430593.html
Other observations from a non-trivial web search:
this problem appears to be non-rare
it seems to be related to some form of template<> use
others seem to see this problem with "Release" build when it did not have this problem with "Debug" build (but it is also seen on the "Debug" build in many cases)
if the link "fails" on one machine, it may "succeed" on another build machine (not sure why, a "clean-build" appears to have no effect)
if you comment in/out a particularly significant couple-lines-of-code, and finish your build, and keep doing this until all the code is un-commented again, your link may succeed (this appears to be repeatable)
if you get this error with MSVC2008, and you port your code to MSVC2010, you will still get this error
===[PETITION TO THE GOOD PEOPLE OF THE WORLD]===
If you have other observations on this error, please list them below (as other answers, or as comments below this answer). I have a similar problem, and it's not my fault, and none of these work-arounds worked for me (although they did appear to work for others in their projects in some cases).
I'm adding a bounty because this is driving me nuts.
===[UPDATE+2]===
(sigh), Here's more things to try (which apparently work for others, but did not work for me):
this guy changed his compile settings, and it worked (from thread at http://forums.codeguru.com/showthread.php?249603.html):
Project->Settings->C++ tab, Debug cathegory: Inline function expansion: change from 'None' to 'Only _inline'.
the above thread references another thread where the had to re-install MSVC
it is possibly related to linking modules with "subtle-differences" in possibly-incompatible compiler and/or link switches. Check that all the "contributing libs" are built with the exact same switches
Here's some more symptoms/observations on this error/bug:
list(s) for above issues still apply
the issue seems to "start-showing-up" with MSVC2005, and continues with the same behavior for MSVC2008 and MSVC2010 (error still occurs after porting code to newer compilers)
restarting IDE, rebooting machine doesn't seem to work for anybody
one guy said an explicit "clean" followed by a recompile worked for him, but many others say it did not work for them
is often related to "incremental linking" (e.g., turn it off)
Status: No joy.
===[UPDATE+3 : LINK SUCCESS]===
Super-wacky-makes-no-sense fix to successfully link discovered!
This is a variation on (above), where you "fiddle-with-the-code-until-the-compiler-and/or-linker-behaves". NOT GOOD that one might need to do this.
Specific single linker-error (LNK1179) was for MyMainBody<>():
#include "MyClassA.hpp"
#include "MyClassB.hpp"
#include "MyClassC.hpp"
#include "MyClassD.hpp"
#include "MyMainBody.hpp"
int main(int argc, char* argv[])
{
// Use a function template for the "main-body",
// implementation is "mostly-simple", instantiates
// some local "MyClass" instances, they reference
// each other, and do some initialization,
// (~50 lines of code)
//
// !!! LNK1179 for `MyMainBody<>()`, mangled name is ~236 chars
//
return MyMainBody<MyClassA,MyClassB,MyClassC,MyClassD>(argc,argv);
}
THE FIX:
Convert MyMainBody<>() from a "template<>" to an explicit function, LINK SUCCESS.
THIS FIX SUX, as I need the EXACT-SAME-CODE for other types in other utilities, and the MyMainBody<>() implementation is non-trivial (but mostly simple) instantiations-and-setups that must be done in a specific way, in a specific order.
But hey, it's a temporary work-around for now: Confirmed on MSVC2008 and MSVC2010 compilers (same LNK1179 error for each, successful link on each after applying the work-around).
THIS IS A COMPILER AND/OR LINKER ERROR, as the code is "simple/proper-C++" (not even C++11).
So, I'm happy (that I got a link after suffering full-time for 2+weeks). But, disappointed (that the compiler and/or linker has a STUPID GLARING PROBLEM with linking a SIMPLE TEMPLATE<> in this use-case that I couldn't figure out how to address).
FURTHER, the "Bounty Ended", but nobody else wanted to take this on (no other answers?), so looks like "+100" goes to nobody. (heavy-sigh)
This question has a lot of answers but none of them quite capture what was happening in my codebase, and what I suspect the OP was seeing back in 2012 when this question was asked.
The Problem
The COMDAT error on an IID_* type is easy to accidentally reproduce by using the #import directive with both the rename_namespace and named_guids attributes.
If two #imported type libraries contain the same interface, as is likely the case for OP's IXMLDOMImplementation, then the generated .tlh files will declare IID_IXMLDOMImplementation in both namespaces, leading to the duplicate.
For example, the code generated for:
#import <foo.tlb> rename_namespace("FOO") named_guids;
#import <bar.tlb> rename_namespace("BAR") named_guids;
...could be simplified into something like this:
namespace FOO {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
namespace BAR {
extern "C" __declspec(selectany) const GUID IID_IFOOBAR = {0};
}
Here's a simple RexTester reproduction of the problem: https://rextester.com/OLAC10112
The named_guids attribute causes the IID_* to be generated and the rename_namespace attribute wraps it in the namespace.
Unfortunately, in this case, extern "C" does not seem to work as expected when it appears inside a C++ namespace. This causes the compiler to generate multiple definitions for IID_FOOBAR in the same .obj file.
DUMPBIN /SYMBOLS or a hex editor confirms the duplicate symbols.
The linker sees these multiple definitions and issues a duplicate COMDAT diagnostic.
A Solution
Knowing that rename_namespace doesn't play well with named_guids, the obvious solution is to simply not use them together. It's probably easiest to remove the named_guids attribute and instead use the _uuidof() operator.
After removing named_guids from #import directives and touching up the code, replacing all uses of FOO::IID_IFooBar with _uuidof(FOO::IFooBar), my COM-heavy codebase is back to building again.
This issue is reported as a bug in some specific versions of Visual Studio 2017. Try patching 15.9.1 or later to fix this issue
Reported Issue in VS 15.8 Preview 4
Resolved patchs in VS 15.9 Preview 2
I encountered this problem whilst porting some code (1) from MSVC to GCC. To get the build to link on GCC, I had to provide empty implementations for some specialised templated functions (2), and this resulted in LNK1179 on MSVC. I was able to resolve by inlining the functions (3), i.e.
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b);
template<> template<> void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
template<> template<> inline void LongName1<LongName2>::FunctionName(boost::library::type1 & a, const unsigned int b) {};
I had to do
c++ -> code generation -> enable function - level linking -> no
Hopefully my lame workaround will help someone: I make sure to manually delete ALL .obj AND intermediate build files (including at least .pch, .pdb, .tlog, .lastbuildstate and anything else just hanging out looking suspicious) and rebuild from scratch.
I suggest without evidence that having some files left over from a previous build tends to cause the problem to happen more frequently. In my specific build system, I delete and recreate the .vcxproj and .sln files from scratch as well.
My own personal suspicion is that some kind of race condition exists in the build/link process between the time that intermediate files are read and the time they are written in a large project. Again, I have no evidence this is true, but this is my only guess that seems to fit all the known facts of the bug.
I wrote Outlook addins years ago and I was asked to write another. Right off the bat, I ran into this problem and through a little process of elimination, I fixed mine.
It turns out that when you choose an extensibity project(I hand coded mine back in the day), it creates and save 2 objects that I was unaware of: DTE and DTE80. To create the interfaces that manipulate these objects, they import directly from the DLLs in stdafx.h. Being that I'm working on Outlook, I also needed to import a couple of interfaces: Office and Outlook.
So, seeing as this error popped up almost immediately after writing my first tidbits of code, I started over, and added one thing at a time. The project blew chunks in the described way right after I added:
//Added mvc
//The following #import imports MSO based on it's LIBID
#import "libid:2DF8D04C-5BFA-101B-BDE5-00AA0044DE52" version("2.2") lcid("0") rename_namespace("Office") raw_interfaces_only named_guids
using namespace Office;
//The following #import imports Outoloks Object lib based on it's LIBID
#import "libid:00062FFF-0000-0000-C000-000000000046" rename_namespace("Outlook") raw_interfaces_only named_guids
using namespace Outlook;
So, seeing as I had no intention of figuring out the DTE stuff, I just commented out them and anything having to do with them:
//The following #import imports VS Command Bars based on it's LIBID
// #import "libid:1CBA492E-7263-47BB-87FE-639000619B15" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE based on it's LIBID
// #import "libid:80cc9f66-e7d8-4ddd-85b6-d9e6cd0e93e2" version("8.0") lcid("0") raw_interfaces_only named_guids
//The following #import imports DTE80 based on it's LIBID
// #import "libid:1A31287A-4D7D-413e-8E32-3B374931BD89" version("8.0") lcid("0") raw_interfaces_only named_guids
After wandering around fixing the compile errors, it compiled and linked just fine. I'm not suggesting this will work for everybody, but it worked for me. Good luck to any who pass by here....
I got this error and was really confused about it. Ended commenting out everything in the referenced cpp and reintroduce things in small batches until the file was back in the same state as when I started. And I don't get the error anymore. To me this points to this in my case being a bug in the compiler but since I can't reproduce it anymore I can't get help further than that.
I'm on:
Microsoft Visual Studio Professional 2019
Version 16.11.3