If I write an if statement in my C program, press enter three times, then write a comment, the below is my output. Notice the two lines between the condition and the comment are completely empty.
if(my_condition) {
<Tab>// My comment here
My issue is that Vim does not insert any tab character(s) between the beginning of the line and the cursor position until a character is typed. This is very annoying for me, because I like to move my cursor up and down the block of code often. Since there isn't a real tab on the two lines, if I moved up one line my cursor would go to the beginning of the line, instead of staying on the same column. I come from Sublime Text and other editors where this has never been a problem.
Is there a plugin or setting such that I can accomplish the following?
if(my_condition) {
<Tab>
<Tab>
<Tab>// My comment here
All help is appreciated. I've looked into using Visual mode, but have had undesirable side effects of enabling it all the time. Certainly there is a simple way to automatically add the tabs when I make a new line?
This is very annoying for me, because I like to move my cursor up and down the block of code often.
Well, as you might have noticed, switching to vim means that you need to change your own editing behavior. And that might be the toughest, more than learning the new commands, because habits die hard!
I'm not saying that you should stop scrolling around your function in an useless manner, though, but that you should stop moving around with the "cursor" keys in insert mode.
When you're doing movements when in insert mode it has the side effect you're exposing as "inconvenient", but it also has the side effect of breaking the "repeat" command (.). After a cursor movement in insert mode, a . will only repeat characters typed after that movement.
So, what you should consider in your editing behavior, is to avoid empty lines, avoid trailing spaces/tabs and never move around in insert mode. Insert mode is for insertion, and the normal mode is for moving around and doing actions on the text.
There are a lot of move commands you can abuse in normal mode (j/k, <C-e>/<C-y>, {/}, …).
That being said, if you get yourself in a situation where you've fscked the indentation, you might want to keep on editing, not caring about the indent, and once you're back in normal mode issue a =i{ that will indent everything within the block following the syntax file (and your indent settings).
I would like vim to scroll horizontally like nano does, by scrolling only the current line, not the whole screen.
I tried playing with nowrap and scrolloff settings, without success.
Here are some screenshots (with the cursor at the end of a long line) to explain myself.
Nano:
Vim (wrap):
Vim (nowrap):
Thanks!
No, Vim cannot do this, and I think it would be hard to implement this in a way that isn't inconsistent or confusing to the user. There would need to be an indicator (like with side scrolling) that only the current line is scrolled. Also in Vim, there are several commands (like j / k and i_CTRL-Y / i_CTRL-E) that refer to the same column in above / below lines. A partially scrolled view state would make it difficult to use those.
That said, you can sort-of achieve this with a hack: The foldtext of folded lines does not scroll horizontally. So if you fold each individual line (other than the current one) via a custom 'foldexpr', set the fold text to be the line's text, and automatically close all surrounding folds, you'll get this. However, as you'll lose syntax highlighting and "normal" folding, this is more for demonstration than an actual solution.
I recently started using git, and by default it would want to use vim. I always wanted to look a bit deeper in this editor, but was always thrown back, only using it if for some reason (such as in case of a near dead Linux system) it was unavoidable. Even now I soon ended up reconfiguring git to use mcedit instead (which I use for programming).
The problem was that OK, I gave the command :help to see how I could start. Then in the help system it suggests me to jump to the subject interesting me using CTRL-]. And here I am lost. I have a Hungarian keyboard, and simply couldn't find where it excepted to find ]. So I can just scroll around in a list of topics I can not enter.
This is just the beginning: In general how much such "weird" combinations I may except? And how I could fix those up? An other problem with the Hungarian language is that it has a bunch of extra vowels which have to be mapped on the same amount of keys like English with it's 26 letters (there are 9 extra letters, so 9 keys "lost"!). Would this hinder the use of vim for writing Hungarian text (where I would require these keys to produce the language-specific vowels)?
How this problem could be solved in a way that if I happen to get an English keyboard (for which layout I guess vim was originally designed), I wouldn't have to re-learn the positioning of the keys? (Since I have no English keyboard around I can't try what happens. As I tried neither of the two keys on the left of 'P' would suffice for the CTRL-] combination while as far as the layouts I checked the second should be it. Of course my system is configured for Hungarian layout)
The language truly is irrelevant, I guess everyone having non-English keyboards might face similar problems. So how you work yourself around these?
Look at /usr/share/vim/vim74/keymap/ directory (in debian/ubuntu it is a part of the vim-runtime package), you should see a bunch of keymap files for different locales. Chose the one you like. In the example I use russian-jcukenwin.vim.
Add to your .vimrc file →
set keymap=russian-jcukenwin
set iminsert=0
set imsearch=0
highlight lCursor guifg=NONE guibg=Cyan
Now you can switch layout with Ctrl-^ keys. Note: layout is switchable when in insert-mode.
As you can guess the first line is the name of the file I mentioned. The next two lines sets the iminsert and imsearch in order to start writing the very first time with latin layout. In fact Ctrl-^ toggles them between 1 and 0. And the last line draws the caret with cyan color when layout is changed.
You can remap all vim defaults bindings with the map function.
For further information, you can read this tutorial
simple solution
you can switch to English layout when using vim:
setxkbmap us
and switch back to hungarian keyboard (hu) afterwards.
xkb
To show you another way:
the xkeyboard layout for hu keyboard is located in /usr/share/X11/xkb/symbols/hu. Try to compare the layout with /usr/share/X11/xkb/symbols/us.
There are also layout variants for hu keyboard than just default.
See my post here
If you want to do something advanced, you could also apply the english keyboard to the CAPS LOCK modifier LEVEL
When I type :!ls, for example, and see the result, it shifts up the current window to make space for it.
I've been annoyed by how the whole content moves up and down. I'm wondering if there's a way to fix that in either vim or gvim 7.3 - like in Emacs.
So for example, if I have lines 1~30, and the message area takes up 5 lines, I want my code window to show lines 1~25 instead of 6~30. That's what Emacs does, I think.
Thanks.
As far as I am aware, this is not possible in vim. However, there are ways to get around it. You can use screen or tmux and use that to create a lower window to execute commands in. You can also take a look into conque, which simulates a terminal within vim.
I use MacVim (and gvim) a lot. I'm familiar with and use a lot of the basic movement commands (b, w, $, 0, G). However, for a lot of things—such as selecting particular lines on the screen or jumping to a particular column in a different line—I use the mouse (sometimes in concert with my left hand on the keyboard). It also helps that my mouse has a scroll wheel and buttons for changing tabs.
I also need to admit... I use the arrow keys on my keyboard rather than hjkl.
I think that my speed (and posture at the computer) will be improved by not having to escape from insert mode, and from keeping both hands on the main part of the keyboard.
What convinced you to abandon the mouse? What are the most helpful shortcuts for moving quickly between lines and columns, scrolling, etc.?
This question is inspired by this recent post
I think that my speed (and posture at
the computer) will be improved by not
having to escape from insert mode
No, you must escape from insert mode right after you typed what you want. It quickly becomes a reflex, so you don't really lose time (I sometimes even press escape after completing a web form...). Normal mode isn't just for moving around, it's used to perform most operations (save from typing): for instance deleting or moving sections of text. You also benefit from entering insert mode with the appropriate key: o to start a line, S to replace a line (while keeping indentation), A to move to the end of the line, c+motion to replace a few words or until a given character... All of these save keystrokes.
The mouse seems fast, but in reality it isn't precise, so you lose time (in addition to the constant back and forth with the keyboard). ViM has a long list of moving commands (see :help usr_03) which, when mastered, are faster than the mouse in most situations.
Use search the most you can (/, ?, *, #, f, t...). I personally use Ctrl+(d,u,f,b) a lot. Also, Ctrl+(o, i) and `` are really useful to go back where you were before a search or something else.
h, j, k, l are there to place your right hand near to useful commands (i, u, o...): I always have my fingers on them. The arrows force you to move your hand a lot.
Try to look at a few commands in :help, then use them a lot, and you'll get habits about what you should use to move according to the situation. Nobody uses ViM the same way.
The more I used the keyboard movement in vim, the less I wanted to use the mouse. It doesn't help that extended periods of time where I'm constantly moving from keyboard to mouse can take a toll on my wrist.
If you want to force doing things the vim way, unplug your mouse for a while! The more you use the keyboard, the more you will love it. This worked for me.
For moving between lines, I usually just use jk but I often skip to lines using :line_num. Getting to a specific column in a line, I typically use wbe^0$ and put modifiers in front of w, b, or e if I'm skipping through several words. And there is also the shifted versions, WBE which also come in handy often.
I have to admit that I often use the arrow keys for specific movement in vim.
I rarely use hjkl. However, I find that most of my navigation is done with other commands such as w (skip a word forward), b (skip a word backwards). Combine this with modifiers such as 3w (3 words forward). : skip to a specific line.
I've never really had to abandon the mouse since I never really started with it. All I can say is that attempting to use editors without all the keyboard shortcuts that vim has can feel quite painful.
I'd run vimtutor from the command line (Terminal.app in OS X). It runs vim with a tutorial document. That document was what really made me realize the power of some of the commands. You'll pick up some that are most useful to you and gain more over time. Eventually you'll find yourself using the mouse less and less.
One command that will really improve your movement speeds is f. f plus a character will jump to the first occurrence of that character on the current line. Pressing ; will jump to the next occurrence. Of course this can be used in combination with other commands. So, for example, removing all characters up to and including the first closing parenthesis is achieved by pressing d+f+).
You can seriously revolve your life around jk in hjkl.
nnoremap <c-k> ddkP "move current line up one
nnoremap <c-j> ddp "move current line down one
vnoremap <c-j> dp'[V'] "move visual block down one
vnoremap <c-k> dkP'[V'] "move visual block up one
"These may be a bit more esoteric to me"
inoremap jj <esc>o "Insert mode can move to next line (works mid line)
inoremap kk <esc>O "Insert mode new line on previous line
also for the desktop gui (ion3 and gnome)
winj - next window
wink - prev window
(This beats alttab if your editing in vim all day)
also read :he motion.txt in its entirety using j and k to scroll up and down as you do.
I learned vi so for me the mouse has never been something to use with a text editor.
I don't use hjkl except when the machine/network/keyboard/whatever-in-between is not comfortably configured.
Use the mouse where it makes sense. It often does (copy/paste to and from other gui applications).
To answer your question, though: Once you start using vim as a tool for transforming text bits with macros, the movements will all start to fall into place ;)
I think you're wondering if there's a quick way to move around while in insert mode (without using the mouse or arrow keys) but unfortunately there isn't; you have to escape out of insert mode. However I know that jumping all the way to your Esc key can be really annoying, which is why I've gotten into the habit of escaping with Ctrl+c, it's much faster.
I almost never use hjkl because it's too tedious. I usually try to jump right to where I want to go. There's a great cheat sheet out there (a Dvorak version is a available also (although it's in PDF)) that you can stare at and imagine the possibilities.
Mostly I use f, F, t, and T, and sometimes they're enhanced by typing a number up front like d2t) will delete up to the second close paren. Sometimes I use search. A lot of the time I use w, W, b, B, e, and E. They're all fantastic.
When I see vim users arrowing all over the place in visual mode just to delete text it makes me shudder, because there are so much easier ways (and hjkl only make you move your arm less, they don't change the number of button presses).
Something I did that I don't know if it's common or not is remapped my arrow keys to be <Esc><Up> and so on. For whatever reason I started out always arrowing around and assuming I'd be back in normal mode, so I just made it do that...
The biggest bummer about Vim is that now when I edit anything anywhere else I hit escape all of the time and type :w after every change...