Many times, I am required to provide some type of break-down to the customers - an example is shown in the attached figure.
I have a table of data ("TABLE DATA" - which is some type of pivot) + Customer provides its official form, its structure must be preserved (highlighted in yellow ). Basically, I need to separate the cost details of CODE "A" and CODE "B" into 2 separated sections.
Customer requires me to provided details for each individual Part (example shows Part A - "Break-Down Part A)
Is there anyway to put a"ITEM" from "TABLE DATA" into Code A and Code B ? the rests can be solved by Vlookup (Price, Quantity) - note: "ITEM" is non-duplicated values . Thank you very much
Number your rows in the breakout using =1 and =A1+1 and then just use the formula ="B-ITEM"&TEXT(A1,"000"). If you want to skip making a counter column you could use ="B-ITEM"&TEXT(ROW()-1,"000") to just use the current row number (minus 1 or however many you need).
If your items aren't sequentially like that, but still unique, I would recommend adding counters on the original tab similar to what you have, which would let you quickly find the 5th A or 7th B, something that counts the previous instances of your current type, and then adds 1. For Row 6 you could do =COUNTIF(A$1:A5,A6)+1.
Related
I am looking for some decent help with my matrix table, and is there a good or best approach to properly match dependent instances in certain matrix using drop downs.
This picture represents my matrix table (Picture 1):
As you can see there are a lot of instances, but horizontally and vertically they got the same number of "headers". Those "1`s" are representing not compatibility in my case but lets call it simply "match". That is on one sheet that is gonna be populated with some new values from time to time.
On another sheet which is actually sheet for showing the data and their compatibility possibilities is equipped with drop downs. There you got "Groups (Group1, Group2...)" in a sense of main parts and "dependent groups (AA1, BB2..)" as small components that are part of main parts. To avoid misunderstanding here you have explanations, I used for the sake of this example fictional values:
Groups aka. Main Parts
Dependent groups aka. components
As you can see beneath, is my fictional table but exactly the same concept as I should use in my real case.
I PUT AN EXPLANATION IN THE PICTURE 2 SO YOU CAN FOLLOW ALONG AND SEE EXACTLY WHERE/WHAT I DID!
What I used firstly there are =match functions, one for vertical position (A3) and one for horizontal (B4). This boolean row is done using =or(index) but reffering to the match positions as you can see. And from there I should use true/false for coloring my group boxes in a case compatibility is possible - thats all the science.
So, my question is if there is another approach to this problem? As you can see I have 3 different rows of functions at one place, or imagine if I will have more "groups" that can rise in many more rows and calculations.
Picture 2
EDITED:
This is screenshot of the original sheet, I just hid some rows that were with Infos that is reason the number is not consistent. As you can see it is almost the same as dummy example I provided above. Underneath every "box" you got three rows of calculations as I mentioned before. The two times number "2" that you see here is the position of some value that I found using =match function, one is for horizontal and another for vertical lookup. In this case it is model type, 070FX is position 2, 100FX is 3 and 200FX is 4th position in the matrix table, and so on for all the other groups. And those groups (Model, Endpoint, Gas sensor...) are defined separately on another sheet where I had to make unique list and dependent list so I can reference those to my drop down list.
EDIT Nr 4! So this formula I used for true/false:
=SUMPRODUCT(('0359-matrix'!$A$2:$A$101=F10)*(('0359-matrix'!$B$1:$CW$1=$B$10)+('0359-matrix'!$B$1:$CW$1=$C$10)+('0359-matrix'!$B$1:$CW$1=$D$10)+('0359-matrix'!$B$1:$CW$1=$E$10)+('0359-matrix'!$B$1:$CW$1=$F$10)+('0359-matrix'!$B$1:$CW$1=$G$10)+('0359-matrix'!$B$1:$CW$1=$H$10)+('0359-matrix'!$B$1:$CW$1=$I$10)+('0359-matrix'!$B$1:$CW$1=$J$10)+('0359-matrix'!$B$1:$CW$1=$K$10)+('0359-matrix'!$B$1:$CW$1=$L$10)+('0359-matrix'!$B$1:$CW$1=$M$10)+('0359-matrix'!$B$1:$CW$1=$N$10)+('0359-matrix'!$B$1:$CW$1=$O$10)+('0359-matrix'!$B$1:$CW$1=$P$10)+('0359-matrix'!$B$1:$CW$1=$Q$10)+('0359-matrix'!$B$1:$CW$1=F13)+('0359-matrix'!$B$1:$CW$1=G13)+('0359-matrix'!$B$1:$CW$1=H13)+('0359-matrix'!$B$1:$CW$1=I13)+('0359-matrix'!$B$1:$CW$1=J13))*'0359-matrix'!$B$2:$CW$101)>0
I copied only last part, or when it starts from second row..Because it is too long to write whole funciton - it cuts down automatically.
('0359-matrix'!$B$1:$CW$1=$Q$10)+('0359-matrix'!$B$1:$CW$1=$B$13)+('0359-matrix'!$B$1:$CW$1=$C$13)+('0359-matrix'!$B$1:$CW$1=$D$13)+('0359-matrix'!$B$1:$CW$1=$E$13)+('0359-matrix'!$B$1:$CW$1=$F$13))*'0359-matrix'!$B$2:$CW$101)>0
But on marked cells I am getting the same results: B22 - F22 has the same as B21 - F21 (boolean) what shouldnt be like that but to follow color, green is False, it has to be something with an array reference.
Checkout the following. A1 to E5 is the matrix that shows which pieces are incompatible (=1). The others have to be empty or 0.
In cell I8 I used the following formula (and copied it down up to I11):
=SUMPRODUCT(($A$2:$A$5=H8)*(($B$1:$E$1=$H$8)+($B$1:$E$1=$H$9)+($B$1:$E$1=$H$10)+($B$1:$E$1=$H$11))*$B$2:$E$5)
The formula result shows you the amount of incompatibilities a part has. Eg AA1 has one incompatibility with BB2 but BB2 is incompatible with 2 AA1 and CC3.
To get the TRUE/FALSE use the same formula and append >0: like =SUMPRODUCT(…)>0
For any additinonal "group" (Model, Endpoint, …) you need to add another +($B$1:$E$1=$H$12) where $B$1:$E$1 points to your matrix data and $H$12 to your selected group value.
Overview of the formula ranges:
Note that this kind of calculation can only tell the amount of incompatibilites a part has but not the names of the parts that are incompatible.
Edited horizontal version
Formula in the selected cell is
=SUMPRODUCT(($A$2:$A$5=G8)*(($B$1:$E$1=$G$8)+($B$1:$E$1=$H$8)+($B$1:$E$1=$I$8)+($B$1:$E$1=$J$8))*$B$2:$E$5)
you can pull it to the right.
I'm trying to design a second page that shows % results of my data on page 1.
For example, Column F & G allow manual entry of numbers 1-4 which are based off data the user types in at another location.
This is being used for trade tracking in investments so there will be quite a few numbers but the end result will be a row will show a specific stock, it's subsequent data, whether it made or lost money, etc.
What I want to do in page 2 is using the numbers 1-4 which were typed in at columns F & G, translate that into an edge on page 2.
For example, if there were 50 columns of data typed out for trades executed, I could take the number of winning trades of a certain setup (say number 3) and divide that by the total trades of 50 to come out with a win % for that setup.
However, I have no clue to how to translate that forumla into a filter formula so that on page 2 I could see that of the numbers 1-4 (4 different setups) I could easily see the highest and lowest win % to determine the best setup to use.
I'm not the best in excel but I understand enough to code most of that, I simply have no idea how to take that end formula and add a filter to it so that it only uses partial results. I've got 4 other formulas I want to use on page 2 as well to help build something that could really benefit myself, but if someone could just show me how to filter data into a formula, I think I could take it form there.
Thanks for the help
Ben
You can also do something like this with array formulas
=MAX(IF(Sheet1!$F$2:$F$50=$A2,$E$2:$E$50))
(Press Ctrl+Shift+Enter [CSE], instead of just Enter when entering Array Formulas)
Also, take a look a the SUMPRODUCT function. It comes in very handy for filtering data. Here are some helpful links...
https://www.get-digital-help.com/2017/12/07/sumproduct-multiple-criteria/
https://www.get-digital-help.com/2017/12/08/sumproduct-and-if-function/
https://www.get-digital-help.com/2010/09/01/extract-a-unique-distinct-list-by-matching-items-that-meet-a-criterion-in-excel/
Part 1:
Cross Reference Column A Sheet 1 to find a matching value on Column A Sheet 2, and then fill in corresponding Column B, C, D Values from Sheet 2 for Sheet 1.
I have 2 sheets:
Sheet 1: Company & Representative
Sheet 2: Company & Client first name, Client Last Name, Client Email
I want to match to put in new columns on Sheet 1 that have the client first name, last name, and email based on the company matching ( they do not match by cell #).
Does anyone have any advice on how to do this? I've got about 2000 and know there must be a better way than manual.
Part 2:
Is it possible to use a similar formula to populate paragraph text in another column if the company name contains certain text or letters? Say the company titles are various and long but each contains adjectives that can help distinguish their industry or years of experience, then is it possible to make another column including 10+ possible conditions to fill out different paragraphs depending on the conditions met?
So for example have company names in column A drive company industry supply list (that will be in paragraph form) in column J. Here is an example:
Column:
ABC level 1
ABC level 2
ABC Levels Elementary
ABC Levels Advanced
BCD Level 4
BCD Level All
BCD Level Intermediate
(continued until infinity..)
XYZ Company Level 12
If Level 1-6 or Elementary: Input >
Eucalyptus is one of three similar genera that are commonly referred to as "eucalypts",
If level Intermediate: Input>
Tree sizes follow the convention of:
If Level Advanced: Input >
A mature eucalyptus may take the form of a low shrub or a very large tree. The species can be divided into three main habits and four size categories.
If level all: Input >
Eucalyptus is one of three similar genera that are commonly referred to as "eucalypts"
+
Tree sizes follow the convention of:
+
A mature eucalyptus may take the form of a low shrub or a very large tree. The species can be divided into three main habits and four size categories.
eucalyptus copy used for example only and to educate us all on the eucalyptus plant of course. ** changed the copy to shorter so we can more easily read the example**
enter image description here
Thanks so much!
Kalina
Say if I have a Sheet2 with data like the picture showing below:
My Sheet1 should look like this:
There are at least two ways to accomplish your goal:
VLOOKUP (show in column C, Matching 1):
=VLOOKUP(A2,Sheet2!$A$2:$D$8,2,0)&", "&VLOOKUP(A2,Sheet2!$A$2:$D$8,3,0)&", "&VLOOKUP(A2,Sheet2!$A$2:$D$8,4,0)
The VLOOKUP just repeated three times to concatenate the first name, last name and the email.
INDEX/MATCH (show in column D, Matching 2):
=INDEX(Sheet2!$A$1:$D$8,MATCH(A2,Sheet2!$A$1:$A$8,0),2)&", "&INDEX(Sheet2!$A$1:$D$8,MATCH(A2,Sheet2!$A$1:$A$8,0),3)&", "&INDEX(Sheet2!$A$1:$D$8,MATCH(A2,Sheet2!$A$1:$A$8,0),4)
Similar to VLOOKUP to repeat three times.
Hope this helps and let me know if you have any question.
Here is how you can do for your part 2:
For example you have setup a table to show different levels and descriptions (Column D and E). And you want to find the description under column B from the given company info on column A. Here is the formula you want to enter in cell B2 and copy/drag down.
=IFERROR(VLOOKUP(RIGHT(A2,LEN(A2)-FIND("Level",A2)+1),$D$2:$E$11,2,0),"Please verify company name")
What this does is first, use RIGHT(A2,LEN(A2)-FIND("Level",A2)+1) to find which level keyword inside the company name. Then use VLOOKUP to look the matching level and grab the description from column E. I also added an IFERROR just in case someone entered an incorrect name. You can change that message output to anything you like. Hope this will solve your problem and let me know if you have any question.
I would suggest putting data info on each tab into a tables, and then using an Index-Match or a vlookup to pull the data from the other table that matches. It's hard to give an exact answer without an image/example.
Apologies for the tile gore - was trying to be descriptive.
I have a large lab result data set, and it has been found that one analyte was screened for twice per sample and i need to capture both sets of results. This results in me having a table similar to below where Antimony is listed twice. Is there a way to automate something either to flag the instances where i have two rows like that or rename to antimony-1 and antimony-2? Since I have 300 sites screened for the same things, everything shows up as duplicate and i can't use the simple methods. The main trigger is the proximity to another row where everything is matching except the results.
If I assume you have the data in you screen shot starting in cell A1 (and Soil as your site) I'd add to columns the first combines Site & Element (Column F in my example):
=A1&C1
Result: SoilAluminium
In the column next to that I'd have a formula:
=F1&COUNTIF($F$1:F1,F1)
Result - SoilAluminium1, SoilAntimony1, SoilAntimony2 etc
Note: Pay Attention to the $'s
I hope that works
Is it possible to parse/cast text (like "=A1+A2") as a formula in MS Excel? I want to build a formula from pieces of text - some of which will only be typed in later by a user.
If the INDIRECT() function did not only work for referencing cells, then I could have typed this =INDIRECT("=A1+A2").
I know you can a work around this problem by simply adding a lot more hidden columns to do sub calculations. But for the sake scalability and efficiency, I would rather do something like the above.
I found a similar questions here and here, yet they don't solve my problem.
The Real-world problem:
Read on for a better understanding as to why you would want to do the above
Scenario
Each item in the list consists of a string, which contains anywhere from 1 to 5 account names each. Each account name is followed by an account number in brackets. The length of the number determines the type of account. Part of the account number is a date, of which the date format depends on the type of account. Further more, each account type may have more that 1 account-number length associated with it, although each number-length[*] is only associated with 1 account type.
Objectives
Extract account-names and their respective account-numbers and account-types from a list.
Make an assumption as to the account-type from the account-number
Validate this assumption by inspecting the build of the number and elements in the name
Check the validity of the account-numbers depending on their type.
The tricky part (this is where my problem lies)
The account-types and their respective account-number-lengths are not known before hand, and are typed into a table by the user of the sheet, specifying a type of account and the number-lengths associated with this account-type. The user should type this into a list - not go and tinker around with delicate formulas
Done so far
Column A: Contains the raw data (each cell has up to 5 names and numbers)
Columns B..F: Each column extracts 1 name, remains empty if all are already extracted
Columns G..K: Each column extracts 1 number corresponding to its name in columns B..F, remains empty if all are already extracted
Columns L..P: Each column calculates the length of the corresponding number in columns
G..K
Now the user would type the following details into a table which assigns certain number-lengths an account type:
TYPE2, BUSINESS, (OR(length=13,length=6))
where length will later be replaced with the cell address which contains the calculated account number-length.
What I want to do now
Columns Q..U:
Should all indicate the account-type of the corresponding account-number in columns G..K. The idea is to build a nested if-elseIf-elseIf formula using the criteria typed in by the user as specified above. Example of one of the elseIF statements:
SUBSTITUTE(CONCATENATE("=IF(",criteria,",",type,",",errCode)),"length","O10"))
All of these elseIf statements will then be concatenated together to form a master formula which will then need to be parsed/cast as a formula to calculate the account-type
This proposal uses only 5 columns (1 for each account-number, containing the master formula) and a table specifying account-types and criteria, also keeping the user away from formulas. Editing 1 line of code (the criteria) will update all formulas. Efficient & Scalable.
Since the user should never tinker around with the formulas under the hood, a simple 1 column if-elseIf-elseIf is out of the question. The alternative to the above would be to make a separate column to test for each account-type for each account-number. Separating/Abstracting out each test to its own column results in much better readability, easier editing & much less debugging - Unless you like multi-screen-wide-formulas. Example: 5 account-numbers * 10 possible account types = 50 extra columns.
Each edit to any criteria needs to copied to 4 other non-adjacent columns and drag-filled down 10,000 rows (columns can not be adjacent since it is effectively a 5x5 array of columns). Not Efficient nor scalable. Unless I'm missing some elegant way of updating non-adjacent formulas in a single click
The rest of the validations error indications are trivial.
Sample data
Tshepo Trust (6901/2005) Marlene Mead (8602250646085)
Great Force Inv 67 Pty Ltd (200602258007)
Jane (870811) Livingstone (6901/2005) Janette Appel (8503250647056) James (900111)
I know all this would probably be much easier to achieve with clever usage of VBA, eliminating all the need to simulate abstraction, encapsulation, multi-dimensional arrays and functional programming on a spreadsheet. But until I can program in VBA, worksheet formulas will be my refuge.
[*]: account number-length could also be described as the amount of digits in the number or as indicated by this formula: LEN(accNumber)
In VBA you have access to Cell.Formula.
I usually used Range to peek a cell by address.
I'm not sure if this would answer your question(it's a very detailed question!), but if your user was entering the account numbers in a table (I'm calling it 'RefTable') , that was:
Length of account number | business type
----------------------------------------
6 | Accountant
8 | Advisor
Then you could just use a vlookup on the length of the account number, given you've already separated them out.
=vlookup(len(accNumber), Reftable, 2, false)
Make sure that you either use a dynamic range name, or specify plenty of space below in RefTable, so that when your users add types, they don't get lost.
Also, if you have two different accounts with the same length, this could get you into trouble.