I have a dataset on excel with more than 40k entries, and there are 2 columns.
I want to find if there exists an entry for example with 1 in the first column and 1687 in the second column, I tried using this following IF function:
=IF(COUNTIF(B2:B178,"1687"),"Yes","No)
where A1:A178 have 1 in the first column.
This function works perfectly alright, however in terms of selecting the range for Countif, it requires much work as sometimes the range i have is more than 3 to 4k. This is way too time consuming as I have to repeat this search for many pairs of numbers.
I then tried by adding a helper column, where the 1st entry would be "=A2&B2"
My plan was to search this entire helper column for "11687" instead, however this fails to identify entries where it has 1 in the first column, 1687 in the second, and 11 in the first column, and 687 in the second column.
Ideally if the "find" function (Ctrl+F) could find 2 columns for different values it will be exactly what I need.
Could anyone please advise me on how to do this search?
Thank you very much!
Try this formula and fill it all the way down, should be more efficient than COUNTIF:
=IF(AND($A1="1",$B1="1687"),TRUE,FALSE)
Then you have a column of TRUE/FALSE that you can use to do what you want.
Change your range into a table and use built in Excel filtering capabilities. See http://office.microsoft.com/en-001/excel-help/filter-data-in-a-range-or-table-HP010073941.aspx#BMfilter_text
Related
I have array of numbers in a single column like this:
I want only that numbers for which corresponding negative numbers exist. If number exist 2 times, but negative number exist only one time, then I wanted to retain one positive and one negative number. Similarly, if number exists 3 times, and negative number appears only two times, then I want 2 set of numbers including positive and negative. In this case, I wanted to get output:
5 2 -2 -5
Orders of numbers are not relevant for me. Please do not use VBA. You can create multiple column and apply filter at the end.
Thank you for the response, but I wanted to get the data in column next to the values. Like:
5
2
-2
-5
Please help.
Here's another Office 365 solution:
Name the data range DATA
Put this formula anywhere: =CONCAT(REPT(-ROW(A1:A100)&" "&ROW(A1:A100)&" ",COUNTIF(DATA,"="&ROW(A1:A100)*IF(COUNTIF(DATA,"="&-ROW(A1:A100))<COUNTIF(DATA,"="&ROW(A1:A100)),-1,1))))
That will output the pairs into one cell.
Here's a slightly modified Step 2, which excludes duplicates: =CONCAT(IF((COUNTIF(DATA,"="&-ROW(A1:A100))>0)*(COUNTIF(DATA,"="&ROW(A1:A100))>0),-ROW(A1:A100)&" "&ROW(A1:A100)&" ",""))
Looks like this:
The data doesn't need to be sorted. Both methods work up to 100, but you can easily expand that by changing A100 to A1000 or whatever you need.
Use the vlookup formula to identify the rows, and you can use the Filter & Unique formula to get the list, or a pivot table.
First, immediately next to your data use the formula:
=vlookup(A1*-1,$A$1:$A$1,1,0)
For non-365:
This will produce an error for each instance that doesn't have a match. You can filter at this point to get your list from the existing table. You can also create a pivot table under the Data tab of your ribbon and inserting a pivot table. Filter the #N/A from there to get an exclusive list without hidden rows.
For 365:
You can use the following combination of formulas to get the exclusive list as well.
=UNIQUE(FILTER(B1:B8,ISNUMBER(B1:B8)),0,0) or =UNIQUE(FILTER($B$1:$B$8,ISNUMBER($B$1:$B$8)),0,0) should yield the same results
As ScottCraner mentioned, you can circumvent the helper column in 365 by modifying the formula a bit more:
=UNIQUE(FILTER(A1:A8,ISNUMBER(MATCH(-A1:A8,A1:A8,0)),"")
The Match here is doing something similar to the Vlookup, but housing that logic within the formula, so it's a cleaner solution in my opinion.
Using your data the result was { -5,-2,2,5 }
These are spill formulas so you only need to put it in one spot and it will expand the formula over the adjacent cells below where it's entered for however many cells needed to list all the unique numbers that occur. It takes into account the negatives and so on. This may be a 365 formula, so if you're on another version of excel it may not work.
Edit: Adjusted the instructions to fully address the question.
I have 2 Tables in Excel from SQL that I need to match.
Table 1:
Table 2
I would need to look up in Table 2 for date in column B where category is Relevant and return it into Table 1 where in Table 1 category is first visit.
I have tried all different formulas and it doesn't work.
Combination of INDEX() and MATCH() generally does not work.For example:
=INDEX(Table2B:B,MATCH(MAX(IF(Visitors number="AAAA",Order_Date)),Order_Date,0))
I get error.
The data set can be messy and too big, so I can not predefine that I am searching for second or third value.
Large with multiple criteria does not work either. I just get 0 or error. For example:
=LARGE(IF((Table2A2=Table2B:B)*(Table2B2>=Table1A:A);Table2C:C);1)
neither does SUMPRODUCT():
=SumProduct(LARGE((Table2A:A=Table1B2)*(Table2B2>=Table1A2*(Table2C:C);1))
Any kind advice of solution?
Thankful in advance.
Use the following ARRAY FORMULA:
=IF(C2="First Visit",INDEX(Table2!A:C,MATCH(A2&B2,Table2!B:B&Table2!A:A,0),3))
To make it work confirm it with CTRL+SHIFT+ENTER instead of ENTER to get the brackets {}:
{=IF(C2="First Visit",INDEX(Table2!A:C,MATCH(A2&B2,Table2!B:B&Table2!A:A,0),3))}
I am trying to lookup a value from another table based on a reference table.
See below my data sample:
SHEET 1 ("CalculationLiability"):
SHEET 2 ("KeyMetrics"):
In sheet 1, cell G7 I am trying to look up the value from Sheet 2 based on 3 criteria (supplier unique ID, type and season) I tried the following formula, but it is returning a #REF error.
=INDEX(KeyMetrics!$F$6:$AS$100,
SUMPRODUCT((KeyMetrics!$D$6:$D$39=CalculationLiability!$D7)*
(KeyMetrics!$E$6:$E$39=CalculationLiability!$G$6)*
(KeyMetrics!$F$5:$AS$5=CalculationLiability!$E7)))
Anyone knows what I am doing wrong here? I can get it to work for two criteria, but for three criteria it doesn't work. Any help or push into the right direction is much appreciated!
The Index uses a multi column, multi row reference. That means that you need two additional arguments, one argument for row, and another for column.
Your formula currently only provides one additional argument. When you step through the formula with the Evaluate Formula tool you can see that in the last step.
You can use an Index with two Match functions. The first one to find the row, the second one to find the column.
=INDEX(KeyMetrics!$F$6:$AS$100,
MATCH($D7&$G$6,INDEX(KeyMetrics!$D$6:$D$100&KeyMetrics!$E$6:$E$100,0),0),
MATCH(CalculationLiability!E7,KeyMetrics!$F$5:$AS$5))
You can also use Sumproduct, but in that case, don't use Index.
=SUMPRODUCT(KeyMetrics!$F$6:$AS$39,
(KeyMetrics!$D$6:$D$39=CalculationLiability!$D7)*
(KeyMetrics!$E$6:$E$39=CalculationLiability!$G$6)*
(KeyMetrics!$F$5:$AS$5=CalculationLiability!$E7))
I'm using Excel 2010 and have a datasheet with multiple tabs, this is the current SUMIF function that I am using
=IF(SUMIF('Master Data'!$J$2:$J$200,'Resource View (2)'!B22,'Master Data'!$W$2:$W$200)>0,Current_row_different column, "")
Basically, I find some rows in the other sheet that have a value of 1 I then want to use these rows that have a value of 1 but use a different column within that row to populate the true condition.
So say for instance row 4 contains a 1 at column A I then want to stay on row 4 but get the value of column B for the true condition.
Is this possible?
EDIT:
I have now managed to get the function working however its a bit of an Excel hack, because I have had to move the columns around in the master data and its a bit messy now anyway here's what I've got
=IF(SUMIF('Master Data'!$C$2:$C$200,'Resource View (2)'!B22,'Master Data'!$W$2:$W$200)>0,VLOOKUP(B22,'Master Data'!$C$2:$F$90,3,FALSE),"")
Now I know this is because VLOOKUP searches through the first column specified and it doesn't seem to work at all if i try to put the range in backwards i.e. $F$90:$C$2 instead of $C$2:$F$90. Is there any way to manipulate VLOOKUP to work like this?
Yes, actually there is a way - a brother of VLOOKUP - it's INDEX(MATCH()). It is a very useful tool, as you can look at any column and return any other, not only looking at the first one to return the ones to the right. Also, INDEX(MATCH()) can be used in forming array formulas, if you need that, while VLOOKUP cannot.
Basically, this part of your formula:
VLOOKUP(B22,'Master Data'!$C$2:$F$90,3,FALSE)
would be changed with this:
INDEX('Master Data'!$E$2:$E$90,MATCH(B22,'Master Data'!$C$2:$C$90,FALSE))
So, after all, the equivalent for
=IF(SUMIF('Master Data'!$C$2:$C$200,'Resource View (2)'!B22,'Master Data'!$W$2:$W$200)>0,VLOOKUP(B22,'Master Data'!$C$2:$F$90,3,FALSE),"")
would be
=IF(SUMIF('Master Data'!$C$2:$C$200,'Resource View (2)'!B22,'Master Data'!$W$2:$W$200)>0,INDEX('Master Data'!$E$2:$E$90,MATCH(B22,'Master Data'!$C$2:$C$90,FALSE)),"")
I am trying to compare two different Excel (2010/xlsx) tables with related data to find matches. They would be on different sheets but in the same workbook (not that it should affect the problem).
I think the best route is some combination of sumproduct, match, and index... but I haven't been able to get them to work so far. I see the main question (cell G17) being solved by creating a subset of rows from Table 2 to compare against their corresponding data in Table 1 (index/match), then using arrays to do a multiple criteria selection to count how many match the criteria I chose (sumproduct).
I have played around with vlookup, countif(s), and sumif(s) but haven't seen a good way to apply them to this problem.
You can use SUMIF as a "quasi-lookup" like this
=SUMPRODUCT((file="doc")*(modified < SUMIF(user,creator,create)))
I'm not sure how to do it in a single cell as you've asked, but I would create an extra column in the second table which uses vlookup to find the created date, and another column containing whether or not the created date is greater than the modified date. Finally, you could use countif to combine them.
To be more concrete, in your example, I would put =vlookup(F3,A$3:D$5,2,FALSE) in cell I3, and =I3>H3 into cell J3, and expand both of these down. Then cell G17 could be given by =countif(J3:J5,TRUE).