Struggling with some Revit code to copy the profile of a floor and use it as the sketch profile for a void extrusion in a family.
Here is the Full Sharp Development Code. It half works in my custom project template, when I try to use it in an out of the box project generated from revit default template it gives the error "a managed exception was thrown by revit or by one of its external applications"
In my template it cannot properly split the curves into a secondary array. It says the array elements are being changed but when the loop runs again the element i is back to it's original content??? The TaskDialog clearly says the elements have changed, until the loop iterates again.
Full code: To work it requires a generic family with the name "Void - Custom" to be in the project. The "If found" near the bottom last page and a half of code, is where the for loop is not behaving as expected.
/*
* Created by SharpDevelop.
* User: arautio
* Date: 4/30/2019
* Time: 11:10 AM
*
* To change this template use Tools | Options | Coding | Edit Standard Headers.
*/
using System;
using Autodesk.Revit.UI;
using Autodesk.Revit.DB;
using Autodesk.Revit.DB.Architecture;
using Autodesk.Revit.DB.Structure;
using Autodesk.Revit.UI.Selection;
using System.Collections.Generic;
using System.Linq;
using Autodesk.Revit.ApplicationServices;
using Autodesk.Revit.Attributes;
using System.Text;
using System.IO;
using System.Diagnostics;
namespace ARC
{
[Autodesk.Revit.Attributes.Transaction(Autodesk.Revit.Attributes.TransactionMode.Manual)]
[Autodesk.Revit.DB.Macros.AddInId("3411F411-6FC1-4A4D-9CFD-37ABB2028A15")]
public partial class ThisApplication
{
private void Module_Startup(object sender, EventArgs e)
{
}
private void Module_Shutdown(object sender, EventArgs e)
{
}
#region Revit Macros generated code
private void InternalStartup()
{
this.Startup += new System.EventHandler(Module_Startup);
this.Shutdown += new System.EventHandler(Module_Shutdown);
}
#endregion
public void FloorGrating()
{
StringBuilder sb = new StringBuilder();
Dictionary<Floor, List<ModelCurve>> dict_SketchLines = new Dictionary<Floor, List<ModelCurve>>();
UIDocument uidoc = this.ActiveUIDocument;
Document document = uidoc.Document;
View activev = document.ActiveView;
ElementId levelId = null;
levelId = activev.LevelId;
Element levelem = document.GetElement( levelId );
Level lev = document.ActiveView.GenLevel;
Reference refsel = uidoc.Selection.PickObject(ObjectType.Element, "Select Floor to Add Grating To");
Element elem = document.GetElement(refsel.ElementId);
Floor f = elem as Floor;
List<ElementId> _deleted = null;
using (Transaction t = new Transaction(document, "temp"))
{
t.Start();
document.Regenerate();
_deleted = document.Delete(elem.Id).ToList();
t.RollBack();
}
bool SketchLinesFound = false;
List<ModelCurve> _sketchCurves = new List<ModelCurve>();
foreach (var id in _deleted)
{
ModelCurve mc = document.GetElement(id) as ModelCurve;
if (mc != null)
{
_sketchCurves.Add(mc);
SketchLinesFound = true;
}
else
{
if (SketchLinesFound) break;
}
}
dict_SketchLines.Add(f, _sketchCurves);
foreach (Floor key in dict_SketchLines.Keys)
{
List<ModelCurve> _curves = dict_SketchLines[key];
sb.AppendLine(string.Format("floor {0} has sketchlines:", key.Id));
foreach (ModelCurve mc in _curves)
{
sb.AppendLine(string.Format("{0} <{1}>", mc.GetType(), mc.Id));
sb.AppendLine(string.Format("<{0}>", mc.GeometryCurve.IsBound.ToString()));
if (mc.GetType().ToString() == "Autodesk.Revit.DB.ModelArc" && mc.GeometryCurve.IsBound == false)
{
TaskDialog.Show("Revit", "Circle Found");
}
try
{
sb.AppendLine(string.Format("<{0} -- {1}>", mc.GeometryCurve.GetEndPoint(0), mc.GeometryCurve.GetEndPoint(1)));
}
catch
{
}
}
sb.AppendLine();
}
//TaskDialog.Show("debug", sb.ToString());
Document docfamily;
Family fam;
string ftitle = document.Title;
string fpath = document.PathName;
int ftitlelen = ftitle.Length + 4;
int fpathlen = fpath.Length;
int finpathlen = fpathlen - ftitlelen;
string sfinpath = fpath.Substring(0,finpathlen);
string famname = "GratingVoid";
string fext = ".rfa";
int counter = 1;
while (counter < 100)
{
famname = ("GratingVoid" + counter as String);
Family family = FindElementByName(document,typeof(Family),famname)as Family;
if( null == family )
{
sfinpath = (sfinpath + famname + fext);
counter = 1000;
}
counter += 1;
}
FilteredElementCollector collector0 = new FilteredElementCollector(document);
ICollection<Element> collection0 = collector0.WhereElementIsNotElementType().ToElements();
List<FamilySymbol> fsym0 = new FilteredElementCollector(document).OfClass(typeof(FamilySymbol)).Cast<FamilySymbol>().ToList();
FamilySymbol famsymb0 = null;
foreach (FamilySymbol symb in fsym0)
{
if (symb.Name == "Void - Custom")
{
famsymb0 = symb as FamilySymbol;
}
}
fam = famsymb0.Family;
docfamily = document.EditFamily(fam);
try
{
docfamily.SaveAs(#sfinpath);
}
catch
{
TaskDialog.Show("Revit", "Could Not Save Void Family");
}
using (Transaction trans = new Transaction(docfamily))
{
trans.Start("family");
bool circleflag = false;
ElementId delid = null;
FilteredElementCollector collector = new FilteredElementCollector( docfamily );
foreach(Element element in collector.OfClass(typeof(GenericForm)))
{
delid = element.Id;
}
docfamily.Delete(delid);
CurveArray loccurva = new CurveArray();
foreach (Floor key in dict_SketchLines.Keys)
{
List<ModelCurve> _curves = dict_SketchLines[key];
foreach (ModelCurve mc in _curves)
{
if (mc.GetType().ToString() == "Autodesk.Revit.DB.ModelArc" && mc.GeometryCurve.IsBound == false)
{
circleflag = true;
}
LocationCurve lcurve = mc.Location as LocationCurve;
Curve c = lcurve.Curve as Curve;
loccurva.Append(c);
}
}
try
{
if (circleflag == true && loccurva.Size == 2)
{
Curve tempc;
if (loccurva.get_Item(0).GetType().ToString() == "Autodesk.Revit.DB.Arc")
{
tempc = loccurva.get_Item(0);
}
else
{
tempc = loccurva.get_Item(1);
}
loccurva.Clear();
loccurva.Append(tempc);
}
CurveArrArray newcurarr = new CurveArrArray();
newcurarr.Append(loccurva);
SortCurvesContiguousArray(newcurarr);
TaskDialog.Show("Revit CurveArray Array Size" , newcurarr.Size.ToString());
foreach (CurveArray ca in newcurarr)
{
TaskDialog.Show("Revit CurveArray within Array Size" , ca.Size.ToString());
}
// Below is edited for error control - leaving out the secondary loops for now
CurveArrArray switcharr = new CurveArrArray();
//switcharr.Append(newcurarr.get_Item(1));
switcharr.Append(newcurarr.get_Item(0));
//SortCurvesContiguousArray(loccurva);
//CurveArrArray newcurarr = new CurveArrArray();
//newcurarr.Append(loccurva);
double end = 1;
SketchPlane sketch = FindElementByName( docfamily,typeof( SketchPlane ), "Ref. Level" ) as SketchPlane;
docfamily.FamilyCreate.NewExtrusion(false, switcharr, sketch, end);
}
catch
{
TaskDialog.Show("Revit", "Could Not Write to Curve Array or Create Extrusion");
}
trans.Commit();
}
docfamily.Save();
docfamily.LoadFamily(document, new CustomFamilyLoadOption());
docfamily.Close();
File.Delete(sfinpath);
Family familynew = FindElementByName(document,typeof(Family),famname)as Family;
if( null == familynew )
{
TaskDialog.Show("Revit", "Family Does Not Exist");
}
FilteredElementCollector collector1 = new FilteredElementCollector(document);
ICollection<Element> collection = collector1.WhereElementIsNotElementType().ToElements();
List<FamilySymbol> fsym = new FilteredElementCollector(document).OfClass(typeof(FamilySymbol)).Cast<FamilySymbol>().ToList();
FamilySymbol famsymb = null;
foreach (FamilySymbol symb in fsym)
{
if (symb.Name == famname)
{
famsymb = symb as FamilySymbol;
}
}
using (Transaction trans = new Transaction(document))
{
trans.Start("PlaceVoid");
if( ! famsymb.IsActive )
{
famsymb.Activate();
}
XYZ p = new XYZ(0,0,0);
FamilyInstance gratingvoid = document.Create.NewFamilyInstance( p, famsymb, lev, lev, StructuralType.NonStructural );
document.Regenerate();
trans.Commit();
}
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
static public Element FindElementByName(Document doc,Type targetType,string targetName)
{
return new FilteredElementCollector( doc ).OfClass( targetType ).FirstOrDefault<Element>(e => e.Name.Equals( targetName ) );
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
public class CustomFamilyLoadOption : IFamilyLoadOptions
{
public bool OnFamilyFound(bool familyInUse, out bool overwriteParameterValues)
{
overwriteParameterValues = true;
return true;
}
public bool OnSharedFamilyFound(Family sharedFamily,bool familyInUse,out FamilySource source, out bool overwriteParameterValues)
{
source = FamilySource.Family;
overwriteParameterValues = true;
return true;
}
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
const double _inch = 1.0 / 12.0;
const double _sixteenth = _inch / 16.0;
static Curve CreateReversedCurve(Curve orig )
{
//if( !IsSupported( orig ) )
//{
// throw new NotImplementedException("CreateReversedCurve for type " + orig.GetType().Name );
//}
if( orig is Line )
{
//return creapp.NewLineBound(orig.GetEndPoint( 1 ), orig.GetEndPoint( 0 ) );
return Line.CreateBound(orig.GetEndPoint( 1 ), orig.GetEndPoint( 0 ) );
}
else if( orig is Arc )
{
// return creapp.NewArc( orig.GetEndPoint( 1 ), orig.GetEndPoint( 0 ), orig.Evaluate( 0.5, true ) );
return Arc.Create( orig.GetEndPoint( 1 ), orig.GetEndPoint( 0 ), orig.Evaluate( 0.5, true ) );
}
else
{
throw new Exception(
"CreateReversedCurve - Unreachable" );
}
}
public static void SortCurvesContiguousArray(CurveArrArray curvesarr)
{
double _precision1 = 1.0 / 12.0 / 16.0; // around 0.00520833
double _precision2 = 0.001; // limit for CurveLoop.Create(...)
int cn = curvesarr.Size;
int ci = 0;
while (ci < cn)
{
CurveArray curves = curvesarr.get_Item(ci);
ci +=1;
// account for multiple curve loops with secondary array
CurveArray loop1 = new CurveArray();
CurveArray loop2 = new CurveArray();
int n = curves.Size;
int split = 1;
// Walk through each curve (after the first)
// to match up the curves in order
for (int i = 0; i < n; ++i)
{
TaskDialog.Show("Revit I Loop Run", i.ToString());
Curve curve = curves.get_Item(i);
if (curve.GetType().ToString() == "Autodesk.Revit.DB.Arc" && curve.IsBound == false)
{
break;
}
XYZ beginPoint = curve.GetEndPoint(0);
XYZ endPoint = curve.GetEndPoint(1);
XYZ p,q;
// Find curve with start point = end point
bool found = (i + 1 >= n);
for (int j = i + 1; j < n; ++j)
{
p = curves.get_Item(j).GetEndPoint(0);
q = curves.get_Item(j).GetEndPoint(1);
// If there is a match end->start,
// this is the next curve
if (p.DistanceTo(endPoint) < _precision1)
{
if (p.DistanceTo(endPoint) > _precision2)
{
XYZ intermediate = new XYZ((endPoint.X + p.X) / 2.0, (endPoint.Y + p.Y) / 2.0, (endPoint.Z + p.Z) / 2.0);
curves.set_Item(i, Line.CreateBound(beginPoint, intermediate));
curves.set_Item(j, Line.CreateBound(intermediate, q));
}
if (i + 1 != j)
{
Curve tmp = curves.get_Item(i + 1);
curves.set_Item(i + 1, curves.get_Item(j));
curves.set_Item(j, tmp);
}
found = true;
break;
}
// If there is a match end->end,
// reverse the next curve
if (q.DistanceTo(endPoint) < _precision1)
{
if (q.DistanceTo(endPoint) > _precision2)
{
XYZ intermediate = new XYZ((endPoint.X + q.X) / 2.0, (endPoint.Y + q.Y) / 2.0, (endPoint.Z + q.Z) / 2.0);
curves.set_Item(i, Line.CreateBound(beginPoint, intermediate));
curves.set_Item(j, Line.CreateBound(p, intermediate));
}
if (i + 1 == j)
{
curves.set_Item(i + 1, CreateReversedCurve(curves.get_Item(j)));
}
else
{
Curve tmp = curves.get_Item(i + 1);
curves.set_Item(i + 1, CreateReversedCurve(curves.get_Item(j)));
curves.set_Item(j, tmp);
}
found = true;
break;
}
}
if (!found)
{
// if not found, must be part of a new loop - move it to the back and keep going and add to second array
TaskDialog.Show("Revit No Match Found for item", i.ToString());
TaskDialog.Show("Revit", "Moveing it to back of list");
Curve tmp1 = curves.get_Item(i);
TaskDialog.Show("Revit tmp1 Current i item endpt", tmp1.GetEndPoint(0).ToString());
loop2.Append(tmp1);
Curve tmp2 = curves.get_Item(n - split);
TaskDialog.Show("Revit tmp2 Back of list item endpt", tmp2.GetEndPoint(0).ToString());
// set current item to rear
curves.set_Item(i, tmp2);
// set rear item to current
curves.set_Item(n - split, tmp1);
TaskDialog.Show("Revit new item i endpt", curves.get_Item(i).GetEndPoint(0).ToString());
TaskDialog.Show("Revit moved item endpt", curves.get_Item(n - split).GetEndPoint(0).ToString());
// error testing - try to append in a different manner and check values
//curves.set_Item(i, Line.CreateBound(curves.get_Item(i).GetEndPoint(0), curves.get_Item(i).GetEndPoint(1)));
//curves.set_Item(n - split, Line.CreateBound(curves.get_Item(n - split).GetEndPoint(0), curves.get_Item(n - split).GetEndPoint(1)));
//Curve ncurve = Line.CreateBound(curves.get_Item(n - split).GetEndPoint(0), curves.get_Item(n - split).GetEndPoint(1));
//TaskDialog.Show("Revit Appended to Loop2 Endpoint", ncurve.GetEndPoint(0).ToString());
//loop2.Append(ncurve);
//set the split off counter so items not fitting in first loop can be split to new array.
split += 1;
//reset the counter back so item moved from rear can be checked in next run of for loop
i -= 2;
}
//set counter to end for loop when all items that do not fit in first loop are processed
if (i >= n - (split + 1))
{
TaskDialog.Show("Revit", "End Of Looping");
TaskDialog.Show("Revit - The Split Number", split.ToString());
i = n;
}
}
int counter = 0;
// recreate array with only items from first loop found
while (counter <= (n - split))
{
loop1.Append(curves.get_Item(counter));
counter += 1;
}
TaskDialog.Show("Revit loop1 Size", loop1.Size.ToString());
curvesarr.Clear();
curvesarr.Append(loop1);
if (loop2.Size > 0)
{
string stringinfo = "";
// run the loop detection on a second array that was split from the first
TaskDialog.Show("Revit loop2 Size", loop2.Size.ToString());
CurveArrArray tmpcurvesarr = new CurveArrArray();
tmpcurvesarr.Append(loop2);
SortCurvesContiguousArray(tmpcurvesarr);
loop2.Clear();
loop2 = tmpcurvesarr.get_Item(0);
curvesarr.Append(loop2);
foreach (Curve ccc in loop2)
{
stringinfo = (stringinfo + " " + ccc.GetEndPoint(0).ToString() + " - " + ccc.GetEndPoint(1).ToString());
}
TaskDialog.Show("Revit", stringinfo);
}
}
}
}
}
Thanks for any and all help.
Shane
I am using an MFC MDI application. I want to close all child windows on a notification. For this purpose, I am using this code:
CMDIFrameWnd *pFrame = NULL;
CMDIChildWnd *pChild = NULL;
CDocTemplate* pDocTemplate = NULL;
CDocument* pDoc = NULL;
for (POSITION pos = AfxGetApp()->GetFirstDocTemplatePosition(); pos != NULL; )
{
pDocTemplate = AfxGetApp()->GetNextDocTemplate( pos );
for (POSITION pos1 = pDocTemplate->GetFirstDocPosition(); pos1 != NULL; )
{
if (pos1 == NULL)
break;
CDocument* pDoc = pDocTemplate->GetNextDoc( pos1 );
for (POSITION pos2 = pDoc->GetFirstViewPosition(); pos2 != NULL; )
{
CView* pView = (CSignalWindow*)pDoc->GetNextView( pos2 );
pView->CloseWindow();
}
}
}
When this code is executed, in debug mode, it looks its closing all window and UI show black screen in entire child window area.
I want to update this window area after closing all child windows.
How I can update this area?
You should not close the view. Just close the parent frame.
for (POSITION posTemplate = AfxGetApp()->GetFirstDocTemplatePosition(); pos != NULL; )
{
pDocTemplate = AfxGetApp()->GetNextDocTemplate(posTemplate);
POSITION posDoc;
while (posDoc = pDocTemplate->GetFirstDocPosition())
{
CDocument* pDoc = pDocTemplate->GetNextDoc(posDoc);
POSITION posView;
while (posView=pDoc->GetFirstViewPosition())
{
CView* pView = pDoc->GetNextView(posView);
pView->GetParentFrame()->DestroyWindow();
}
}
}
Because you want to close all, you just need to get the head of the lists and remove it.
Using DestroyWindow for the frame may delete more than one view, if you collect views in one child frame (ie. splitter window).
There should never be a problem in repainting, because the parent window always redraws its client area, when a child window is destroyed, as long as you don't use SetRedraw...
I am using MFC MDI application and i am adding two doc templates as shown in code below:
BOOL CEmuDiagnosticsClientApp::InitInstance()
{
INITCOMMONCONTROLSEX InitCtrls;
InitCtrls.dwSize = sizeof(InitCtrls);
// Set this to include all the common control classes you want to use
// in your application.
InitCtrls.dwICC = ICC_WIN95_CLASSES;
InitCommonControlsEx(&InitCtrls);
CWinAppEx::InitInstance();
// Initialize OLE libraries
if (!AfxOleInit())
{
AfxMessageBox(IDP_OLE_INIT_FAILED);
return FALSE;
}
AfxEnableControlContainer();
//Added new code
CMultiDocTemplate* pDocTemplate;
pDocTemplate = new CMultiDocTemplate(IDR_STRING_FILTERWINDOW,
RUNTIME_CLASS(CEmuDiagnosticsClientDoc),
RUNTIME_CLASS(CChildFrame), // custom MDI child frame
RUNTIME_CLASS(CFilterWindow));
if (!pDocTemplate)
return FALSE;
AddDocTemplate(pDocTemplate);
SetRegistryKey(_T("Local AppWizard-Generated Applications"));
LoadStdProfileSettings(4); // Load standard INI file options (including MRU)
InitContextMenuManager();
InitKeyboardManager();
InitTooltipManager();
CMFCToolTipInfo ttParams;
ttParams.m_bVislManagerTheme = TRUE;
theApp.GetTooltipManager()->SetTooltipParams(AFX_TOOLTIP_TYPE_ALL,
RUNTIME_CLASS(CMFCToolTipCtrl), &ttParams);
AddDocTemplate(new CMultiDocTemplate(IDR_STRING_SIGNALWINDOW,
RUNTIME_CLASS(CEmuDiagnosticsClientDoc),
RUNTIME_CLASS(CChildFrame), // custom MDI child frame
RUNTIME_CLASS(CSignalWindow)));
// create main MDI Frame window
CMainFrame* pMainFrame = new CMainFrame;
if (!pMainFrame || !pMainFrame->LoadFrame(IDR_MAINFRAME))
{
delete pMainFrame;
return FALSE;
}
m_pMainWnd = pMainFrame;
// Parse command line for standard shell commands, DDE, file open
CCommandLineInfo cmdInfo;
ParseCommandLine(cmdInfo);
// Dispatch commands specified on the command line. Will return FALSE if
// app was launched with /RegServer, /Register, /Unregserver or /Unregister.
if (!ProcessShellCommand(cmdInfo))
return FALSE;
// The main window has been initialized, so show and update it
pMainFrame->ShowWindow(m_nCmdShow);
pMainFrame->UpdateWindow();
return TRUE;
}
I am using this code to iterate over documents and get view classes's reference in my CMainFrame class.
CFilterWindow* p = NULL;
CSignalWindow* p1 = NULL;
for( POSITION pos = AfxGetApp()->GetFirstDocTemplatePosition(); pos != NULL; )
{
CDocTemplate* pTempl = AfxGetApp()->GetNextDocTemplate( pos );
for( POSITION pos1 = pTempl->GetFirstDocPosition(); pos!= NULL; )
{
CDocument* pDoc = pTempl->GetNextDoc( pos1 );
for( POSITION pos2 = pDoc->GetFirstViewPosition(); pos2 != NULL; )
{
CView* pView = pDoc->GetNextView( pos2 );
if( pView->IsKindOf( RUNTIME_CLASS(CFilterWindow) ) )
{
p = (CFilterWindow*)pView;
p->UpdateUI();
// Do what you need with the view...
}
else
{
p1 = (CSignalWindow*)pView;
p1->UpdateUI();
}
}
}
}
Problem is with loop for( POSITION pos2 = pDoc->GetFirstViewPosition(); pos2 != NULL; )
as pDoc->GetFirstViewPosition(); always returning NULL.
It is puzzling me why it is returning NULL.
Can anybody suggest where I am wrong?
I'm using VC++ 2008 (Windows Form Application C++\CLR), I created dynamic array of textboxes (the user defines how many textboxes he wants to create), and i want to make a KeyPress event handler, in order to prevent Chars (i want these textboxes to be numerical only, and accept only one dot "for decimal numbers"). So how can I refer to the textbox that the user is using (the textbox that the cursor on for example) is there any way i can do this? The function looks like:
private: System::Void textBox_KeyPress(System::Object^ sender, System::Windows::Forms::KeyPressEventArgs^ e) {
if(e->KeyChar == '.')
{
if(this->/*the textbox in use*/->Text->Contains(".") && !this->/*the textbox in use*/->SelectedText->Contains("."))
e->Handled = true;
}
else if(!Char::IsDigit(e->KeyChar) && e->KeyChar != 0x08)
e->Handled = true;
}
private void CreateTextBoxControls()
{
intColCount= Convert.ToInt32(txtColumnNo.Text.ToString().Trim());
int rowCount =0;
Table tblHead = new Table();
if (tblHead.GetType().ToString().Equals("System.Web.UI.WebControls.Table") && PHOptions.FindControl("tblHead") == null )
{
tblHead.ID = "tblHead";
tblHead.EnableViewState = true;
tblHead.BorderWidth=Unit.Pixel(0);
tblHead.CellSpacing = 0;
tblHead.CellPadding = 1;
tblHead.Width = Unit.Percentage(96);
TableRow rH = new TableRow();
TableCell cH = new TableCell();
cH.Text= "Table Heading" ;
cH.Font.Bold = true;
rH.Cells.Add(cH);
tblHead.Rows.Add(rH);
PHOptions.Controls.Add(tblHead);
if(intColCount>0)
rH.Visible =true;
else
rH.Visible =false;
}
Table tblHelp = new Table();
if (tblHelp.GetType().ToString().Equals("System.Web.UI.WebControls.Table") && PHOptions.FindControl("tblHelp") == null )
{
tblHelp.ID = "tblHelp";
}
tblHelp.EnableViewState = true;
tblHelp.BorderWidth=Unit.Pixel(1);
tblHelp.CellSpacing = 0;
tblHelp.CellPadding = 1;
tblHelp.BorderWidth = Unit.Pixel(1);
tblHelp.Width = Unit.Percentage(96);
for (int rowIndex=0; rowIndex<=rowCount; rowIndex++)
{
TableRow r = new TableRow();
TableRow rWeight= new TableRow();
//r.ID = "rLabel";
TableRow rID = new TableRow();
for (int clIndex=0; clIndex<intColCount; clIndex++)
{
TableCell c = new TableCell();
txtBox = new TextBox();
if (txtBox.GetType().ToString().Equals("System.Web.UI.WebControls.TextBox") && PHOptions.FindControl("txtOption"+(clIndex+1).ToString()) == null )
{
txtBox.ID ="txtOption"+(clIndex+1).ToString();
//txtBox.Text = (clIndex+1).ToString();
txtBox.Width= Unit.Pixel(45);
txtBox.MaxLength = 2;
c.BorderWidth=Unit.Pixel(1);
c.Width=Unit.Pixel(80);
c.Controls.Add(txtBox);
r.Cells.Add(c);
txtBox.PreRender += new System.EventHandler(this.txtBox_PreRender);
}
}
tblHelp.Rows.Add(r);
}
TableRow rSubmit = new TableRow();
TableCell cSubmit = new TableCell();
cSubmit.ColumnSpan = intColCount ;
btnSubmitButton = new Button();
btnSubmitButton.ID ="btnSubmit";
btnSubmitButton.Text= "Submit";
if( PHOptions.FindControl("btnSubmit") == null )
cSubmit.Controls.Add(btnSubmitButton);
cSubmit.Attributes.Add("Align","Center");
rSubmit.Cells.Add(cSubmit);
tblHelp.Rows.Add(rSubmit);
PHOptions.Controls.Add(tblHelp);
this.btnSubmitButton.PreRender += new System.EventHandler(this.btnSubmitButton_PreRender);
this.btnSubmitButton.Click += new System.EventHandler(this.btnSubmitButton_Click);
}
private void btnSubmitButton_Click(object sender, System.EventArgs e)
{
for (int clIndex=0; clIndex<intColCount; clIndex++)
{
string boxName = "txtOption" + (clIndex+1).ToString();
TextBox tb = PHOptions.FindControl(boxName) as TextBox;
if( lblDisplay.Text != "" )
lblDisplay.Text+=","+tb.Text ;
else
lblDisplay.Text=tb.Text ;
}
}
Just refer this code ...
(this contains both for creating textbox dynamically and read from textbox)
In these example, I want to print the contents in the ID tab_form_1.While trying these
sample to print the tab_form_1 contents,lpOleCommandTarget become NULL while query interface using CComptr .
How to solve this issue?
SAMMPLE
IHTMLDocument2 *pDoc;
GetDHtmlDocument(&pDoc);
CComPtr<IHTMLElement2> spControl;
if(GetElementInterface(_T("tab_form_1") ,&spControl) != S_OK)
return;
//ole command target
LPOLECOMMANDTARGET lpOleCommandTarget = NULL;
spControl->QueryInterface(IID_IOleCommandTarget,(void**)&lpOleCommandTarget);ASSERT(lpOleCommandTarget);
//lpDispatch->Release();
if(lpOleCommandTarget == NULL) return;
//prepare header
CString header = _T("Project Path: &w");
VARIANT header_variant;
VariantInit(&header_variant);
V_VT(&header_variant) = VT_BSTR;
V_BSTR(&header_variant) = CString(header).AllocSysString();
//prepare footer
CString footer = _T("&d &t&b Page&p of &P");
VARIANT footer_variant;
VariantInit(&footer_variant);
V_VT(&footer_variant) = VT_BSTR;
V_BSTR(&footer_variant) = CString(footer).AllocSysString();
//prepare header footer safe arrray
SAFEARRAYBOUND parameter_array_bound[1];
SAFEARRAY *parameter_array = NULL;
parameter_array_bound[0].cElements = 2;
parameter_array_bound[0].lLbound = 0;
parameter_array = SafeArrayCreate(VT_VARIANT,1,parameter_array_bound);
//HRESULT hr;
long index;
index = 0;
HRESULT hr = SafeArrayPutElement(parameter_array,&index,&header_variant);
index = 1;
hr = SafeArrayPutElement(parameter_array,&index,&footer_variant);
VARIANT parameter;
VariantInit(¶meter);
V_VT(¶meter) = VT_ARRAY | VT_BYREF;
V_ARRAY(¶meter) = parameter_array;
// print contents of web browser control
lpOleCommandTarget->Exec(NULL, OLECMDID_PRINT, OLECMDEXECOPT_DODEFAULT, ¶meter,NULL);
//clear all variants
VariantClear(&header_variant);
VariantClear(&footer_variant);
if (parameter_array != NULL) {
SafeArrayDestroy(parameter_array);
}
lpOleCommandTarget->Release();
Try this sample.This will eradicate your problem.This code will print the particular contents into the newly created document.
// create DHtmlDocument for Newly Created Dialog
HRESULT hDispatch = printdlg->m_pBrowserApp->get_Document((IDispatch**)&pDisp);
if(hDispatch != S_OK) return;
HRESULT hResult = pDisp->QueryInterface(IID_IHTMLDocument2, (void**)&pNewDoc);
if(hResult != S_OK) return;
//GetDHtmlDocument for new document
GetDHtmlDocument(&pDoc);
BSTR strSummaryText = GetElementHtml(L"tab_form_1");
// Creates a new one-dimensional array
SAFEARRAY *psaStrings = SafeArrayCreateVector(VT_VARIANT, 0, 1);
if (psaStrings == NULL) {
return;
}
VARIANT *param;
HRESULT hresult = SafeArrayAccessData(psaStrings, (LPVOID*)¶m);
param->vt = VT_BSTR;
param->bstrVal = strSummaryText;
hresult = SafeArrayUnaccessData(psaStrings);
//it will write the div part of tab_form_1 into new document to pass the summary contents alone to the printer
hresult = pNewDoc->write(psaStrings);
// SafeArrayDestroy calls SysFreeString for each strtemp
if (psaStrings != NULL) {
SafeArrayDestroy(psaStrings);
}