I have a sed command in my makefile like following ,purpose of the command is, it should replace string "listen $address" to "",but as a result it is replacing "listen $address" to "$address"
sed -i -e "s/listen $$address//" file.txt
Please suggest any solution.
I have checked many posts but there $ is used as regex variable ,in my case it needs to be treated as hardcoded string
Enclose your sed command in single quotes to avoid variable expansion within double quotes:
sed -e -i 's/listen $address//' file
You can use double quotes though by escaping the $:
sed -e -i "s/listen \$address//" file
I am trying to change the values in a text file using sed in a Bash script with the line,
sed 's/draw($prev_number;n_)/draw($number;n_)/g' file.txt > tmp
This will be in a for loop. Why is it not working?
Variables inside ' don't get substituted in Bash. To get string substitution (or interpolation, if you're familiar with Perl) you would need to change it to use double quotes " instead of the single quotes:
# Enclose the entire expression in double quotes
$ sed "s/draw($prev_number;n_)/draw($number;n_)/g" file.txt > tmp
# Or, concatenate strings with only variables inside double quotes
# This would restrict expansion to the relevant portion
# and prevent accidental expansion for !, backticks, etc.
$ sed 's/draw('"$prev_number"';n_)/draw('"$number"';n_)/g' file.txt > tmp
# A variable cannot contain arbitrary characters
# See link in the further reading section for details
$ a='foo
bar'
$ echo 'baz' | sed 's/baz/'"$a"'/g'
sed: -e expression #1, char 9: unterminated `s' command
Further Reading:
Difference between single and double quotes in Bash
Is it possible to escape regex metacharacters reliably with sed
Using different delimiters for sed substitute command
Unless you need it in a different file you can use the -i flag to change the file in place
Variables within single quotes are not expanded, but within double quotes they are. Use double quotes in this case.
sed "s/draw($prev_number;n_)/draw($number;n_)/g" file.txt > tmp
You could also make it work with eval, but don’t do that!!
This may help:
sed "s/draw($prev_number;n_)/draw($number;n_)/g"
You can use variables like below. Like here, I wanted to replace hostname i.e., a system variable in the file. I am looking for string look.me and replacing that whole line with look.me=<system_name>
sed -i "s/.*look.me.*/look.me=`hostname`/"
You can also store your system value in another variable and can use that variable for substitution.
host_var=`hostname`
sed -i "s/.*look.me.*/look.me=$host_var/"
Input file:
look.me=demonic
Output of file (assuming my system name is prod-cfm-frontend-1-usa-central-1):
look.me=prod-cfm-frontend-1-usa-central-1
I needed to input github tags from my release within github actions. So that on release it will automatically package up and push code to artifactory.
Here is how I did it. :)
- name: Invoke build
run: |
# Gets the Tag number from the release
TAGNUMBER=$(echo $GITHUB_REF | cut -d / -f 3)
# Setups a string to be used by sed
FINDANDREPLACE='s/${GITHUBACTIONSTAG}/'$(echo $TAGNUMBER)/
# Updates the setup.cfg file within version number
sed -i $FINDANDREPLACE setup.cfg
# Installs prerequisites and pushes
pip install -r requirements-dev.txt
invoke build
Retrospectively I wish I did this in python with tests. However it was fun todo some bash.
Another variant, using printf:
SED_EXPR="$(printf -- 's/draw(%s;n_)/draw(%s;n_)/g' $prev_number $number)"
sed "${SED_EXPR}" file.txt
or in one line:
sed "$(printf -- 's/draw(%s;n_)/draw(%s;n_)/g' $prev_number $number)" file.txt
Using printf to build the replacement expression should be safe against all kinds of weird things, which is why I like this variant.
i can able to use the below command to change value of target by means of hard coding.
sed -ie s/^target=.*/target=google.com/ url.properties
But if i used variable i am getting error. I dont know how sed commands all working. I only needed to set build system thats it.
url = google.com
sed -ie s/^target=.*/target=$url/ url.properties
the error is
sed: -e expression #1, char 25: unterminated `s' command
The problem may be happening because your URL may contain / which bash interprets as sed syntax, so something like https/www.google.com ends up something like :
sed -ie 's/^target=.*/target=https/www.google.com/' url.properties
I will suggest to delimit any special characters to avoid sed to be confused :
url=google.com
url=`echo $url | sed -e "s/\//\\\\\\\\\//g"` # delimits backslash in URL's
sed -ie "s/^target=.*/target=$url/" url.properties
Two problems:
You can't have spaces in variable assignments in bash
You must quote the sed command (and ideally the url too)
Working example:
url="google.com"
sed -ie "s/^target=.*/target=$url/" url.properties
I'm trying to add some text (a path) at the end of a line which is found by a sed command:
var="/folder1/folder2/folder3"
sed -i "/Begins with this text/s/$/$var/" filename
I know that double quotes are needed to use variables in a sed command but if I use the above command it gives me an error message saying:
expresssion #1, character 23: unknown option to `s
What am I doing wrong?
Change the delimiter in the substitute command to something that won't appear in $var, e.g.
sed -i "/Begins with this text/s|$|$var|" filename
or escape the slashes in $var:
var="\/folder1\/folder2\/folder3"
If I run these commands from a script:
#my.sh
PWD=bla
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
xxx
bla
it is fine.
But, if I run:
#my.sh
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
$ sed: -e expression #1, char 8: Unknown option to `s'
I read in tutorials that to substitute environment variables from shell you need to stop, and 'out quote' the $varname part so that it is not substituted directly, which is what I did, and which works only if the variable is defined immediately before.
How can I get sed to recognize a $var as an environment variable as it is defined in the shell?
Your two examples look identical, which makes problems hard to diagnose. Potential problems:
You may need double quotes, as in sed 's/xxx/'"$PWD"'/'
$PWD may contain a slash, in which case you need to find a character not contained in $PWD to use as a delimiter.
To nail both issues at once, perhaps
sed 's#xxx#'"$PWD"'#'
In addition to Norman Ramsey's answer, I'd like to add that you can double-quote the entire string (which may make the statement more readable and less error prone).
So if you want to search for 'foo' and replace it with the content of $BAR, you can enclose the sed command in double-quotes.
sed 's/foo/$BAR/g'
sed "s/foo/$BAR/g"
In the first, $BAR will not expand correctly while in the second $BAR will expand correctly.
Another easy alternative:
Since $PWD will usually contain a slash /, use | instead of / for the sed statement:
sed -e "s|xxx|$PWD|"
You can use other characters besides "/" in substitution:
sed "s#$1#$2#g" -i FILE
一. bad way: change delimiter
sed 's/xxx/'"$PWD"'/'
sed 's:xxx:'"$PWD"':'
sed 's#xxx#'"$PWD"'#'
maybe those not the final answer,
you can not known what character will occur in $PWD, / : OR #.
if delimiter char in $PWD, they will break the expression
the good way is replace(escape) the special character in $PWD.
二. good way: escape delimiter
for example:
try to replace URL as $url (has : / in content)
x.com:80/aa/bb/aa.js
in string $tmp
URL
A. use / as delimiter
escape / as \/ in var (before use in sed expression)
## step 1: try escape
echo ${url//\//\\/}
x.com:80\/aa\/bb\/aa.js #escape fine
echo ${url//\//\/}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//\//\/}"
x.com:80\/aa\/bb\/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s/URL/${url//\//\\/}/"
URL
echo $tmp | sed "s/URL/${url//\//\/}/"
URL
OR
B. use : as delimiter (more readable than /)
escape : as \: in var (before use in sed expression)
## step 1: try escape
echo ${url//:/\:}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//:/\:}"
x.com\:80/aa/bb/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s:URL:${url//:/\:}:g"
x.com:80/aa/bb/aa.js
With your question edit, I see your problem. Let's say the current directory is /home/yourname ... in this case, your command below:
sed 's/xxx/'$PWD'/'
will be expanded to
sed `s/xxx//home/yourname//
which is not valid. You need to put a \ character in front of each / in your $PWD if you want to do this.
Actually, the simplest thing (in GNU sed, at least) is to use a different separator for the sed substitution (s) command. So, instead of s/pattern/'$mypath'/ being expanded to s/pattern//my/path/, which will of course confuse the s command, use s!pattern!'$mypath'!, which will be expanded to s!pattern!/my/path!. I’ve used the bang (!) character (or use anything you like) which avoids the usual, but-by-no-means-your-only-choice forward slash as the separator.
Dealing with VARIABLES within sed
[root#gislab00207 ldom]# echo domainname: None > /tmp/1.txt
[root#gislab00207 ldom]# cat /tmp/1.txt
domainname: None
[root#gislab00207 ldom]# echo ${DOMAIN_NAME}
dcsw-79-98vm.us.oracle.com
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: ${DOMAIN_NAME}/g'
--- Below is the result -- very funny.
domainname: ${DOMAIN_NAME}
--- You need to single quote your variable like this ...
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: '${DOMAIN_NAME}'/g'
--- The right result is below
domainname: dcsw-79-98vm.us.oracle.com
VAR=8675309
echo "abcde:jhdfj$jhbsfiy/.hghi$jh:12345:dgve::" |\
sed 's/:[0-9]*:/:'$VAR':/1'
where VAR contains what you want to replace the field with
I had similar problem, I had a list and I have to build a SQL script based on template (that contained #INPUT# as element to replace):
for i in LIST
do
awk "sub(/\#INPUT\#/,\"${i}\");" template.sql >> output
done
If your replacement string may contain other sed control characters, then a two-step substitution (first escaping the replacement string) may be what you want:
PWD='/a\1&b$_' # these are problematic for sed
PWD_ESC=$(printf '%s\n' "$PWD" | sed -e 's/[\/&]/\\&/g')
echo 'xxx' | sed "s/xxx/$PWD_ESC/" # now this works as expected
for me to replace some text against the value of an environment variable in a file with sed works only with quota as the following:
sed -i 's/original_value/'"$MY_ENVIRNONMENT_VARIABLE"'/g' myfile.txt
BUT when the value of MY_ENVIRONMENT_VARIABLE contains a URL (ie https://andreas.gr) then the above was not working.
THEN use different delimiter:
sed -i "s|original_value|$MY_ENVIRNONMENT_VARIABLE|g" myfile.txt